The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Orientation Regulation of Phenylethylammonium Cation Based 2D Perovskite Solar Cell with Efficiency Higher Than 11%
Abstract
Increasing the power conversion efficiency (PCE) of the two‐dimensional (2D) perovskite‐based solar cells (PVSCs) is really a challenge. Vertical orientation of the 2D perovskite film is an efficient strategy to elevate the PCE. In this work, vertically orientated highly crystalline 2D (PEA)2(MA)n–1 Pb n I 3n+1 (PEA= phenylethylammonium, MA = methylammonium, n = 3, 4, 5) films are fabricated with the assistance of an ammonium thiocyanate (NH 4 SCN) additive by a one‐step spin‐coating method. Planar‐structured PVSCs with the device structure of indium tin oxide (ITO)/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate)/(PEA)2(MA)n–1 Pb n I 3n+1/[6,6]‐phenyl‐C61‐butyric acid methyl ester/bahocuproine/Ag are fabricated. The PCE of the PVSCs is boosted from the original 0.56% (without NH 4 SCN) to 11.01% with the optimized NH 4 SCN addition at n = 5, which is among the highest PCE values for the low‐n (n < 10) 2D perovskite‐based PVSCs. The improved performance is attributed to the vertically orientated highly crystalline 2D perovskite thin films as well as the balanced electron/hole transportation. The humidity stability of this oriented 2D perovskite thin film is also confirmed by the almost unchanged X‐ray diffraction patterns after 28 d exposed to the moisture in a humidity‐controlled cabinet (Hr = 55 ± 5%). The unsealed device retains 78.5% of its original PCE after 160 h storage in air atmosphere with humidity of 55 ± 5%. The results provide an effective approach toward a highly efficient and stable PVSC for future commercialization.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Self-citationHigh-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Self-citationEperon, G. E., Stranks, S. D., Menelaou, C., Johnston, M. B., Herz, L. M., & Snaith, H. J. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43822h · Cited by 4,140
Metal-halide perovskites for photovoltaic and light-emitting devices
Stranks, S. D., & Snaith, H. J. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2015.90 · Cited by 3,392
Lead-free organic–inorganic tin halide perovskites for photovoltaic applications
Noel, N. K., Stranks, S. D., Abate, A., Wehrenfennig, C., Guarnera, S., Haghighirad, A.-A., Sadhanala, A., Eperon, G. E., Pathak, S. K., Johnston, M. B., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01076k · Cited by 2,746
Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers
Chen, W., Wu, Y., Yue, Y., Liu, J., Zhang, W., Yang, X., Chen, H., Bi, E., Ashraful, I., Grätzel, M., et al. (2015) · Science · doi:10.1126/science.aad1015 · Cited by 2,279
Self-citation2D Homologous Perovskites as Light-Absorbing Materials for Solar Cell Applications
Cao, D. H., Stoumpos, C. C., Farha, O. K., Hupp, J. T., & Kanatzidis, M. G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b03796 · Cited by 2,158
Ruddlesden–Popper Hybrid Lead Iodide Perovskite 2D Homologous Semiconductors
Stoumpos, C. C., Cao, D. H., Clark, D. J., Young, J., Rondinelli, J. M., Jang, J. I., Hupp, J. T., & Kanatzidis, M. G. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00847 · Cited by 2,130
Cited by
Li, X., Hoffman, J. M., & Kanatzidis, M. G. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01006 · Cited by 1,085
Quantum and Dielectric Confinement Effects in Lower-Dimensional Hybrid Perovskite Semiconductors
Katan, C., Mercier, N., & Even, J. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00417 · Cited by 864
Additive Engineering for Efficient and Stable Perovskite Solar Cells
Zhang, F., & Zhu, K. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902579 · Cited by 805
Causes and Solutions of Recombination in Perovskite Solar Cells
Chen, J., & Park, N. (2019) · Advanced Materials · doi:10.1002/adma.201803019 · Cited by 733
Understanding of perovskite crystal growth and film formation in scalable deposition processes
Liu, C., Cheng, Y.-B., & Ge, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00711c · Cited by 675
Advances in two-dimensional organic–inorganic hybrid perovskites
Zhang, F., Lu, H., Tong, J., Berry, J. J., Beard, M. C., & Zhu, K. (2020) · Energy & Environmental Science · doi:10.1039/c9ee03757h · Cited by 627
Dion-Jacobson Phase 2D Layered Perovskites for Solar Cells with Ultrahigh Stability
Ahmad, S., Fu, P., Yu, S., Yang, Q., Liu, X., Wang, X., Wang, X., Guo, X., & Li, C. (2019) · Joule · doi:10.1016/j.joule.2018.11.026 · Cited by 615
Efficient, stable silicon tandem cells enabled by anion-engineered wide-bandgap perovskites
Kim, D., Jung, H. J., Park, I. J., Larson, B. W., Dunfield, S. P., Xiao, C., Kim, J., Tong, J., Boonmongkolras, P., Ji, S. G., et al. (2020) · Science · doi:10.1126/science.aba3433 · Cited by 611
Surface Passivation Using 2D Perovskites toward Efficient and Stable Perovskite Solar Cells
Wu, G., Liang, R., Ge, M., Sun, G., Zhang, Y., & Xing, G. (2022) · Advanced Materials · doi:10.1002/adma.202105635 · Cited by 531
Self-citationLai, H., Kan, B., Liu, T., Zheng, N., Xie, Z., Zhou, T., Wan, X., Zhang, X., Liu, Y., & Chen, Y. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b04604 · Cited by 477
Self-citationLead-Free Perovskite Materials for Solar Cells
Wang, M., Wang, W., Ma, B., Shen, W., Liu, L., Cao, K., Chen, S., & Huang, W. (2021) · Nano-Micro Letters · doi:10.1007/s40820-020-00578-z · Cited by 423
Enhanced Charge Transport in 2D Perovskites via Fluorination of Organic Cation
Zhang, F., Kim, D. H., Lu, H., Park, J.-S., Larson, B. W., Hu, J., Gao, L., Xiao, C., Reid, O. G., Chen, X., et al. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b00972 · Cited by 382
Kim, H., Lee, S., Lee, D. Y., Paik, M. J., Na, H., Lee, J., & Seok, S. I. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201902740 · Cited by 346
Qin, M., Chan, P. F., & Lu, X. (2021) · Advanced Materials · doi:10.1002/adma.202105290 · Cited by 337
Self-citationDimensionality engineering of hybrid halide perovskite light absorbers
Gao, P., Bin Mohd Yusoff, A. R., & Nazeeruddin, M. K. (2018) · Nature Communications · doi:10.1038/s41467-018-07382-9 · Cited by 333
Hu, J., Oswald, I. W. H., Stuard, S. J., Nahid, M. M., Zhou, N., Williams, O. F., Guo, Z., Yan, L., Hu, H., Chen, Z., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-08980-x · Cited by 308
High‐Quality Ruddlesden–Popper Perovskite Film Formation for High‐Performance Perovskite Solar Cells
Liu, P., Han, N., Wang, W., Ran, R., Zhou, W., & Shao, Z. (2021) · Advanced Materials · doi:10.1002/adma.202002582 · Cited by 294
Shi, J., Gao, Y., Gao, X., Zhang, Y., Zhang, J., Jing, X., & Shao, M. (2019) · Advanced Materials · doi:10.1002/adma.201901673 · Cited by 286
Li, X., Hoffman, J., Ke, W., Chen, M., Tsai, H., Nie, W., Mohite, A. D., Kepenekian, M., Katan, C., Even, J., et al. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b07712 · Cited by 253
Linearly programmable two-dimensional halide perovskite memristor arrays for neuromorphic computing
Kim, S. J., Im, I. H., Baek, J. H., Choi, S., Park, S. H., Lee, D. E., Kim, J. Y., Kim, S. Y., Park, N.-G., Lee, D., et al. (2025) · Nature Nanotechnology · doi:10.1038/s41565-024-01790-3 · Cited by 157
“This result supports previous reports that volatile SCN − completely evaporated during the thermal annealing process, which was performed following a one-step spin-coating 47–49 .”
Metadata
- Authors
- Zhang, X., Wu, G., Fu, W., Qin, M., Yang, W., Yan, J., Zhang, Z., Lu, X., & Chen, H.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2018-01-30
- Volume
- 8
- Issue
- 14
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2791782990
- Cited by
- 390
- References
- 43
- FWCI
- 21.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.