The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
All Pseudocapacitive MXene‐RuO2 Asymmetric Supercapacitors
Abstract
2D transition metal carbides and nitrides, known as MXenes, are an emerging class of 2D materials with a wide spectrum of potential applications, in particular in electrochemical energy storage. The hydrophilicity of MXenes combined with their metallic conductivity and surface redox reactions is the key for high‐rate pseudocapacitive energy storage in MXene electrodes. However, symmetric MXene supercapacitors have a limited voltage window of around 0.6 V due to possible oxidation at high anodic potentials. In this study, the fact that titanium carbide MXene (Ti 3 C 2 Tx) can operate at negative potentials in acidic electrolyte is exploited, to design an all‐pseudocapacitive asymmetric device by combining it with a ruthenium oxide (RuO 2) positive electrode. This asymmetric device operates at a voltage window of 1.5 V, which is about two times wider than the operating voltage window of symmetric MXene supercapacitors, and is the widest voltage window reported to date for MXene‐based supercapacitors. The complementary working potential windows of MXene and RuO 2, along with proton‐induced pseudocapacitance, significantly enhance the device performance. As a result, the asymmetric devices can deliver an energy density of 37 µW h cm−2 at a power density of 40 mW cm−2, with 86% capacitance retention after 20 000 charge–discharge cycles. These results show that pseudocapacitive negative MXene electrodes can potentially replace carbon‐based materials in asymmetric electrochemical capacitors, leading to an increased energy density.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Materials for electrochemical capacitors
Simon, P., & Gogotsi, Y. (2008) · Nature Materials · doi:10.1038/nmat2297 · Cited by 16,427
Self-citationTwo‐Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2
Naguib, M., Kurtoglu, M., Presser, V., Lu, J., Niu, J., Heon, M., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2011) · Advanced Materials · doi:10.1002/adma.201102306 · Cited by 11,855
Self-citationCarbon-based materials as supercapacitor electrodes
Zhang, L. L., & Zhao, X. S. (2009) · Chemical Society Reviews · doi:10.1039/b813846j · Cited by 7,459
2D metal carbides and nitrides (MXenes) for energy storage
Anasori, B., Lukatskaya, M. R., & Gogotsi, Y. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.98 · Cited by 7,440
Self-citationWhat are batteries, fuel cells, and supercapacitors?
Winter, M., & Brodd, R. J. (2004) · Chemical Reviews · doi:10.1021/cr020730k · Cited by 7,389
Conductive two-dimensional titanium carbide ‘clay’ with high volumetric capacitance
Ghidiu, M., Lukatskaya, M. R., Zhao, M.-Q., Gogotsi, Y., & Barsoum, M. W. (2014) · Nature · doi:10.1038/nature13970 · Cited by 5,997
Self-citationWhere do batteries end and supercapacitors begin?
Simon, P., Gogotsi, Y., & Dunn, B. (2014) · Science · doi:10.1126/science.1249625 · Cited by 5,634
Self-citationPseudocapacitive oxide materials for high-rate electrochemical energy storage
Augustyn, V., Simon, P., & Dunn, B. (2014) · Energy & Environmental Science · doi:10.1039/c3ee44164d · Cited by 5,575
Pseudocapacitive Contributions to Electrochemical Energy Storage in TiO2 (Anatase) Nanoparticles
Wang, J., Polleux, J., Lim, J., & Dunn, B. (2007) · The Journal of Physical Chemistry C · doi:10.1021/jp074464w · Cited by 5,333
Guidelines for Synthesis and Processing of Two-Dimensional Titanium Carbide (Ti3C2Tx MXene)
Alhabeb, M., Maleski, K., Anasori, B., Lelyukh, P., Clark, L., Sin, S., & Gogotsi, Y. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b02847 · Cited by 5,045
Self-citation
Cited by
Applications of 2D MXenes in energy conversion and storage systems
Pang, J., Mendes, R. G., Bachmatiuk, A., Zhao, L., Ta, H. Q., Gemming, T., Liu, H., Liu, Z., & Rummeli, M. H. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00324f · Cited by 1,951
Pseudocapacitance: From Fundamental Understanding to High Power Energy Storage Materials
Fleischmann, S., Mitchell, J. B., Wang, R., Zhan, C., Jiang, D.-E., Presser, V., & Augustyn, V. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00170 · Cited by 1,942
Chodankar, N. R., Pham, H. D., Nanjundan, A. K., Fernando, J. F. S., Jayaramulu, K., Golberg, D., Han, Y., & Dubal, D. P. (2020) · Small · doi:10.1002/smll.202002806 · Cited by 852
Peng, J., Chen, X., Ong, W.-J., Zhao, X., & Li, N. (2019) · Chem · doi:10.1016/j.chempr.2018.08.037 · Cited by 829
Emerging 2D MXenes for supercapacitors: status, challenges and prospects
Hu, M., Zhang, H., Hu, T., Fan, B., Wang, X., & Li, Z. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00175a · Cited by 828
Dendritic Nanostructured Waste Copper Wires for High-Energy Alkaline Battery
Chodankar, N. R., Ji, S.-H., Han, Y.-K., & Kim, D.-H. (2020) · Nano-Micro Letters · doi:10.1007/s40820-019-0337-2 · Cited by 769
Printed supercapacitors: materials, printing and applications
Zhang, Y.-Z., Wang, Y., Cheng, T., Yao, L.-Q., Li, X., Lai, W.-Y., & Huang, W. (2019) · Chemical Society Reviews · doi:10.1039/c7cs00819h · Cited by 497
Versatile N‐Doped MXene Ink for Printed Electrochemical Energy Storage Application
Yu, L., Fan, Z., Shao, Y., Tian, Z., Sun, J., & Liu, Z. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901839 · Cited by 487
Biofunctionalized two-dimensional Ti3C2 MXenes for ultrasensitive detection of cancer biomarker
Kumar, S., Lei, Y., Alshareef, N. H., Quevedo-Lopez, M. A., & Salama, K. N. (2018) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2018.08.076 · Cited by 463
3D Printing of Freestanding MXene Architectures for Current‐Collector‐Free Supercapacitors
Yang, W., Yang, J., Byun, J. J., Moissinac, F. P., Xu, J., Haigh, S. J., Domingos, M., Bissett, M. A., Dryfe, R. A. W., & Barg, S. (2019) · Advanced Materials · doi:10.1002/adma.201902725 · Cited by 460
Bai, Y., Liu, C., Chen, T., Li, W., Zheng, S., Pi, Y., Luo, Y., & Pang, H. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202112381 · Cited by 455
Cyclic stability of supercapacitors: materials, energy storage mechanism, test methods, and device
Wu, Q., He, T., Zhang, Y., Zhang, J., Wang, Z., Liu, Y., Zhao, L., Wu, Y., & Ran, F. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta06815f · Cited by 449
3D Printing for Electrochemical Energy Applications
Browne, M. P., Redondo, E., & Pumera, M. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00783 · Cited by 434
MXenes for Rechargeable Batteries Beyond the Lithium‐Ion
Ming, F., Liang, H., Huang, G., Bayhan, Z., & Alshareef, H. N. (2021) · Advanced Materials · doi:10.1002/adma.202004039 · Cited by 424
Self-citationReview of MXene electrochemical microsupercapacitors
Jiang, Q., Lei, Y., Liang, H., Xi, K., Xia, C., & Alshareef, H. N. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.01.018 · Cited by 397
Self-citationMXene—Conducting Polymer Asymmetric Pseudocapacitors
Boota, M., & Gogotsi, Y. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201802917 · Cited by 395
Self-citationZhang, P., Zhu, Q., Soomro, R. A., He, S., Sun, N., Qiao, N., & Xu, B. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000922 · Cited by 355
Ti3C2Tx MXene for electrode materials of supercapacitors
Ma, R., Chen, Z., Zhao, D., Zhang, X., Zhuo, J., Yin, Y., Wang, X., Yang, G., & Yi, F. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta00681a · Cited by 347
Power generation for wearable systems
Gao, M., Wang, P., Jiang, L., Wang, B., Yao, Y., Liu, S., Chu, D., Cheng, W., & Lu, Y. (2021) · Energy & Environmental Science · doi:10.1039/d0ee03911j · Cited by 343
Recent Progress in Ruthenium Oxide‐Based Composites for Supercapacitor Applications
Majumdar, D., Maiyalagan, T., & Jiang, Z. (2019) · ChemElectroChem · doi:10.1002/celc.201900668 · Cited by 340
Wang, J., Yang, H., Li, F., Li, L., Wu, J., Liu, S., Cheng, T., Xu, Y., Shao, Q., & Huang, X. (2022) · Science Advances · doi:10.1126/sciadv.abl9271 · Cited by 338
MXenes for Non‐Lithium‐Ion (Na, K, Ca, Mg, and Al) Batteries and Supercapacitors
Aslam, M. K., Niu, Y., & Xu, M. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000681 · Cited by 337
Sahoo, S., Kumar, R., Joanni, E., Singh, R. K., & Shim, J.-J. (2022) · Journal of Materials Chemistry A · doi:10.1039/d2ta02357a · Cited by 337
MXene‐Based Composites: Synthesis and Applications in Rechargeable Batteries and Supercapacitors
Yang, J., Bao, W., Jaumaux, P., Zhang, S., Wang, C., & Wang, G. (2019) · Advanced Materials Interfaces · doi:10.1002/admi.201802004 · Cited by 331
MXene‐Based Fibers, Yarns, and Fabrics for Wearable Energy Storage Devices
Levitt, A., Zhang, J., Dion, G., Gogotsi, Y., & Razal, J. M. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000739 · Cited by 328
Self-citationThe Many Deaths of Supercapacitors: Degradation, Aging, and Performance Fading
Pameté, E., Köps, L., Kreth, F. A., Pohlmann, S., Varzi, A., Brousse, T., Balducci, A., & Presser, V. (2023) · Advanced Energy Materials · doi:10.1002/aenm.202301008 · Cited by 328
Dong, W., Xie, M., Zhao, S., Qin, Q., & Huang, F. (2023) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2022.100713 · Cited by 319
3D carbon-coated MXene architectures with high and ultrafast lithium/sodium-ion storage
Zhang, P., Soomro, R. A., Guan, Z., Sun, N., & Xu, B. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.04.016 · Cited by 313
Khandelwal, G., Maria Joseph Raj, N. P., & Kim, S. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202101170 · Cited by 313
Tunable Multipolar Surface Plasmons in 2D Ti3C2Tx MXene Flakes
El-Demellawi, J. K., Lopatin, S., Yin, J., Mohammed, O. F., & Alshareef, H. N. (2018) · ACS Nano · doi:10.1021/acsnano.8b04029 · Cited by 309
Self-citationXu, X., Zhang, Y., Sun, H., Zhou, J., Yang, F., Li, H., Chen, H., Chen, Y., Liu, Z., Qiu, Z., et al. (2021) · Advanced Electronic Materials · doi:10.1002/aelm.202000967 · Cited by 305
Boosting the Yield of MXene 2D Sheets via a Facile Hydrothermal-Assisted Intercalation
Han, F., Luo, S., Xie, L., Zhu, J., Wei, W., Chen, X., Liu, F., Chen, W., Zhao, J., Dong, L., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b22339 · Cited by 304
Chemical supercapacitors: a review focusing on metallic compounds and conducting polymers
Naskar, P., Maiti, A., Chakraborty, P., Kundu, D., Biswas, B., & Banerjee, A. (2021) · Journal of Materials Chemistry A · doi:10.1039/d0ta09655e · Cited by 303
Kumar, R., Joanni, E., Sahoo, S., Shim, J.-J., Tan, W. K., Matsuda, A., & Singh, R. K. (2022) · Carbon · doi:10.1016/j.carbon.2022.03.023 · Cited by 296
Recent Advances of Asymmetric Supercapacitors
Wu, N., Bai, X., Pan, D., Dong, B., Wei, R., Naik, N., Patil, R. R., & Guo, Z. (2021) · Advanced Materials Interfaces · doi:10.1002/admi.202001710 · Cited by 292
Wide Voltage Aqueous Asymmetric Supercapacitors: Advances, Strategies, and Challenges
Huang, J., Yuan, K., & Chen, Y. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202108107 · Cited by 289
Covalent Graphene‐MOF Hybrids for High‐Performance Asymmetric Supercapacitors
Jayaramulu, K., Horn, M., Schneemann, A., Saini, H., Bakandritsos, A., Ranc, V., Petr, M., Stavila, V., Narayana, C., Scheibe, B., et al. (2021) · Advanced Materials · doi:10.1002/adma.202004560 · Cited by 288
Chemical Modifications of Layered Double Hydroxides in the Supercapacitor
Jing, C., Dong, B., & Zhang, Y. (2020) · ENERGY & ENVIRONMENTAL MATERIALS · doi:10.1002/eem2.12116 · Cited by 280
Dong, S., He, X., Zhang, H., Xie, X., Yu, M., Yu, C., Xiao, N., & Qiu, J. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta04080j · Cited by 264
Li, H., & Liang, J. (2020) · Advanced Materials · doi:10.1002/adma.201805864 · Cited by 263
Chen, J., Yuan, X., Lyu, F., Zhong, Q., Hu, H., Pan, Q., & Zhang, Q. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta10574j · Cited by 260
Zhang, R., Dong, J., Zhang, W., Ma, L., Jiang, Z., Wang, J., & Huang, Y. (2022) · Nano Energy · doi:10.1016/j.nanoen.2021.106633 · Cited by 257
Li, H., Li, X., Liang, J., & Chen, Y. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803987 · Cited by 256
Porous MXenes enable high performance potassium ion capacitors
Ming, F., Liang, H., Zhang, W., Ming, J., Lei, Y., Emwas, A.-H., & Alshareef, H. N. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.06.013 · Cited by 256
Self-citationKirubasankar, B., Palanisamy, P., Arunachalam, S., Murugadoss, V., & Angaiah, S. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.08.185 · Cited by 254
Mahmood, M., Rasheed, A., Ayman, I., Rasheed, T., Munir, S., Ajmal, S., Agboola, P. O., Warsi, M. F., & Shahid, M. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c03939 · Cited by 253
Shaikh, N. S., Ubale, S. B., Mane, V. J., Shaikh, J. S., Lokhande, V. C., Praserthdam, S., Lokhande, C. D., & Kanjanaboos, P. (2022) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2021.161998 · Cited by 253
Zheng, J., Pan, X., Huang, X., Xiong, D., Shang, Y., Li, X., Wang, N., Lau, W.-M., & Yang, H. Y. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125197 · Cited by 240
Metadata
- Authors
- Jiang, Q., Kurra, N., Alhabeb, M., Gogotsi, Y., & Alshareef, H. N.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2018-01-23
- Volume
- 8
- Issue
- 13
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2793212697
- Cited by
- 1,033
- References
- 45
- FWCI
- 36.87
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.