The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
3D, Mutually Embedded MOF@Carbon Nanotube Hybrid Networks for High‐Performance Lithium‐Sulfur Batteries
Abstract
Metal‐organic frameworks (MOFs) hybridized with a conductive matrix could potentially serve as a sulfur host for lithium‐sulfur (Li‐S) battery electrodes; so far most of the previously studied hybrid structures are in the powder form or thin compact films. This study reports 3D porous MOF@carbon nanotube (CNT) networks by grafting MOFs with tailored particle size uniformly throughout a CNT sponge skeleton. Growing larger‐size MOF particles to entrap the conductive CNT network yields a mutually embedded structure with high stability, and after sulfur encapsulation, it shows an initial discharge capacity of ≈1380 mA h g−1 (at 0.1 C) and excellent cycling stability with a very low fading rate. Furthermore, owing to the 3D porous network that is suitable for enhanced sulfur loading, a remarkable areal capacity of ≈11 mA h cm−2 (at 0.1 C) is obtained, which is much higher than other MOF‐based hybrid electrodes. The mutually embedded MOF@CNTs with simultaneously high specific capacity, areal capacity, and cycling stability represent an advanced candidate for developing high‐performance Li‐S batteries and other energy storage systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Designing high-energy lithium–sulfur batteries
Seh, Z. W., Sun, Y., Zhang, Q., & Cui, Y. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00410a · Cited by 2,573
Gui, X., Wei, J., Wang, K., Cao, A., Zhu, H., Jia, Y., Shu, Q., & Wu, D. (2010) · Advanced Materials · doi:10.1002/adma.200902986 · Cited by 1,528
Self-citationCravillon, J., Münzer, S., Lohmeier, S.-J., Feldhoff, A., Huber, K., & Wiebcke, M. (2009) · Chemistry of Materials · doi:10.1021/cm900166h · Cited by 1,369
A Graphene–Pure‐Sulfur Sandwich Structure for Ultrafast, Long‐Life Lithium–Sulfur Batteries
Zhou, G., Pei, S., Li, L., Wang, D., Wang, S., Huang, K., Yin, L., Li, F., & Cheng, H. (2014) · Advanced Materials · doi:10.1002/adma.201302877 · Cited by 997
Zhong, H., Wang, J., Zhang, Y., Xu, W., Xing, W., Xu, D., Zhang, Y., & Zhang, X. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201408990 · Cited by 938
Zheng, J., Tian, J., Wu, D., Gu, M., Xu, W., Wang, C., Gao, F., Engelhard, M. H., Zhang, J.-G., Liu, J., et al. (2014) · Nano Letters · doi:10.1021/nl404721h · Cited by 719
Cathode Composites for Li–S Batteries via the Use of Oxygenated Porous Architectures
Demir-Cakan, R., Morcrette, M., Nouar, F., Davoisne, C., Devic, T., Gonbeau, D., Dominko, R., Serre, C., Férey, G., & Tarascon, J.-M. (2011) · Journal of the American Chemical Society · doi:10.1021/ja2062659 · Cited by 630
High Energy Density Lithium–Sulfur Batteries: Challenges of Thick Sulfur Cathodes
Lv, D., Zheng, J., Li, Q., Xie, X., Ferrara, S., Nie, Z., Mehdi, L. B., Browning, N. D., Zhang, J., Graff, G. L., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402290 · Cited by 554
Hu, G., Xu, C., Sun, Z., Wang, S., Cheng, H., Li, F., & Ren, W. (2016) · Advanced Materials · doi:10.1002/adma.201504765 · Cited by 532
3D Interconnected Electrode Materials with Ultrahigh Areal Sulfur Loading for Li–S Batteries
Fang, R., Zhao, S., Hou, P., Cheng, M., Wang, S., Cheng, H., Liu, C., & Li, F. (2016) · Advanced Materials · doi:10.1002/adma.201506014 · Cited by 532
Pie-like electrode design for high-energy density lithium–sulfur batteries
Li, Z., Zhang, J. T., Chen, Y. M., Li, J., & Lou, X. W. (2015) · Nature Communications · doi:10.1038/ncomms9850 · Cited by 524
Self-citationMao, Y., Li, G., Guo, Y., Li, Z., Liang, C., Peng, X., & Lin, Z. (2017) · Nature Communications · doi:10.1038/ncomms14628 · Cited by 518
Chen, T., Zhang, Z., Cheng, B., Chen, R., Hu, Y., Ma, L., Zhu, G., Liu, J., & Jin, Z. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b06973 · Cited by 502
Zhou, J., Li, R., Fan, X., Chen, Y., Han, R., Li, W., Zheng, J., Wang, B., & Li, X. (2014) · Energy & Environmental Science · doi:10.1039/c4ee01382d · Cited by 492
Self-citationLi, Z., Li, C., Ge, X., Ma, J., Zhang, Z., Li, Q., Wang, C., & Yin, L. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.02.049 · Cited by 449
Xi, K., Cao, S., Peng, X., Ducati, C., Vasant Kumar, R., & Cheetham, A. K. (2013) · Chemical Communications · doi:10.1039/c3cc38009b · Cited by 376
Qie, L., Zu, C., & Manthiram, A. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502459 · Cited by 321
Zhou, G., Zhao, Y., Zu, C., & Manthiram, A. (2015) · Nano Energy · doi:10.1016/j.nanoen.2014.12.029 · Cited by 267
Chen, T., Cheng, B., Zhu, G., Chen, R., Hu, Y., Ma, L., Lv, H., Wang, Y., Liang, J., Tie, Z., et al. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04433 · Cited by 237
Self-citationLiu, Y., Li, G., Fu, J., Chen, Z., & Peng, X. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201700686 · Cited by 180
Wang, Z., Li, X., Cui, Y., Yang, Y. L., Pan, H., Wang, Z., Wu, C., Chen, B., & Qian, G. (2013) · Crystal Growth & Design · doi:10.1021/cg401304x · Cited by 149
Zhang, H., Wang, Y., Zhao, W., Zou, M., Chen, Y., Yang, L., Xu, L. X., Wu, H., & Cao, A. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b12095 · Cited by 125
Self-citationBao, W., Zhang, Z., Zhou, C., Lai, Y., & Li, J. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.09.132 · Cited by 107
Sulfur encapsulated ZIF-8 as cathode material for lithium–sulfur battery with improved cyclability
Wang, Z., Dou, Z., Cui, Y., Yang, Y., Wang, Z., & Qian, G. (2013) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2013.11.011 · Cited by 94
Shi, J., Peng, H., Zhu, L. Z., Zhu, W., & Zhang, Q. (2015) · Carbon · doi:10.1016/j.carbon.2015.03.031 · Cited by 89
Cited by
Metal–organic frameworks as a platform for clean energy applications
Li, X., Yang, X., Xue, H., Pang, H., & Xu, Q. (2020) · EnergyChem · doi:10.1016/j.enchem.2020.100027 · Cited by 706
Current Status and Future Prospects of Metal–Sulfur Batteries
Chung, S., & Manthiram, A. (2019) · Advanced Materials · doi:10.1002/adma.201901125 · Cited by 622
Deciphering the Modulation Essence of p Bands in Co-Based Compounds on Li-S Chemistry
Zhou, J., Liu, X., Zhu, L., Zhou, J., Guan, Y., Chen, L., Niu, S., Cai, J., Sun, D., Zhu, Y., et al. (2018) · Joule · doi:10.1016/j.joule.2018.08.010 · Cited by 548
Host Materials Anchoring Polysulfides in Li–S Batteries Reviewed
Zhou, L., Danilov, D. L., Eichel, R., & Notten, P. H. L. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202001304 · Cited by 516
Indra, A., Song, T., & Paik, U. (2018) · Advanced Materials · doi:10.1002/adma.201705146 · Cited by 507
Metadata
- Authors
- Zhang, H., Zhao, W., Zou, M., Wang, Y., Chen, Y., Xu, L., Wu, H., & Cao, A.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2018-03-30
- Volume
- 8
- Issue
- 19
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2795355211
- Cited by
- 273
- References
- 27
- FWCI
- 15.52
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.