The DOI matches its Crossref record; 59 of the 59 references it cites were found in a registry or an index.
High‐Performance Electrocatalytic Conversion of N2 to NH3 Using Oxygen‐Vacancy‐Rich TiO2 In Situ Grown on Ti3C2Tx MXene
Abstract
To achieve the energy‐effective ammonia (NH 3) production via the ambient‐condition electrochemical N 2 reduction reaction (NRR), it is vital to ingeniously design an efficient electrocatalyst assembling the features of abundant surface deficiency, good dispersibility, high conductivity, and large surface specific area (SSA) via a simple way. Inspired by the fact that the MXene contains thermodynamically metastable marginal transition metal atoms, the oxygen‐vacancy‐rich TiO 2 nanoparticles (NPs) in situ grown on the Ti 3 C 2 Tx nanosheets (TiO 2/Ti 3 C 2 Tx) are prepared via a one‐step ethanol‐thermal treatment of the Ti 3 C 2 Tx MXene. The oxygen vacancies act as the main active sites for the NH 3 synthesis. The highly conductive interior untreated Ti 3 C 2 Tx nanosheets could not only facilitate the electron transport but also avoid the self‐aggregation of the TiO 2 NPs. Meanwhile, the TiO 2 NPs generation could enhance the SSA of the Ti 3 C 2 Tx in return. Accordingly, the as‐prepared electrocatalyst exhibits an NH 3 yield of 32.17 µg h−1 mg−1cat. at −0.55 V versus reversible hydrogen electrode (RHE) and a remarkable Faradaic efficiency of 16.07% at −0.45 V versus RHE in 0.1 m HCl, placing it as one of the most promising NRR electrocatalysts. Moreover, the density functional theory calculations confirm the lowest NRR energy barrier (0.40 eV) of TiO 2 (101)/Ti 3 C 2 Tx compared with Ti 3 C 2 Tx or TiO 2 (101) alone.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
From molecules to solids with the DMol3 approach
Delley, B. (2000) · The Journal of Chemical Physics · doi:10.1063/1.1316015 · Cited by 11,026
An all-electron numerical method for solving the local density functional for polyatomic molecules
Delley, B. (1990) · The Journal of Chemical Physics · doi:10.1063/1.458452 · Cited by 10,536
How a century of ammonia synthesis changed the world
Erisman, J. W., Sutton, M. A., Galloway, J., Klimont, Z., & Winiwarter, W. (2008) · Nature Geoscience · doi:10.1038/ngeo325 · Cited by 4,607
Flexible MXene/Graphene Films for Ultrafast Supercapacitors with Outstanding Volumetric Capacitance
Yan, J., Ren, C. E., Maleski, K., Hatter, C. B., Anasori, B., Urbankowski, P., Sarycheva, A., & Gogotsi, Y. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201701264 · Cited by 1,883
Metallic Ti3C2T x MXene Gas Sensors with Ultrahigh Signal-to-Noise Ratio
Kim, S. J., Koh, H.-J., Ren, C. E., Kwon, O., Maleski, K., Cho, S.-Y., Anasori, B., Kim, C.-K., Choi, Y.-K., Kim, J., et al. (2018) · ACS Nano · doi:10.1021/acsnano.7b07460 · Cited by 1,699
Challenges in reduction of dinitrogen by proton and electron transfer
van der Ham, C. J. M., Koper, M. T. M., & Hetterscheid, D. G. H. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00085d · Cited by 1,583
Xie, Y., Naguib, M., Mochalin, V. N., Barsoum, M. W., Gogotsi, Y., Yu, X., Nam, K.-W., Yang, X.-Q., Kolesnikov, A. I., & Kent, P. R. C. (2014) · Journal of the American Chemical Society · doi:10.1021/ja501520b · Cited by 1,537
Ammonia synthesis using a stable electride as an electron donor and reversible hydrogen store
Kitano, M., Inoue, Y., Yamazaki, Y., Hayashi, F., Kanbara, S., Matsuishi, S., Yokoyama, T., Kim, S.-W., Hara, M., & Hosono, H. (2012) · Nature Chemistry · doi:10.1038/nchem.1476 · Cited by 1,529
Zhao, J., & Chen, Z. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b05213 · Cited by 1,249
Zhang, C. (., Anasori, B., Seral‐Ascaso, A., Park, S., McEvoy, N., Shmeliov, A., Duesberg, G. S., Coleman, J. N., Gogotsi, Y., & Nicolosi, V. (2017) · Advanced Materials · doi:10.1002/adma.201702678 · Cited by 1,159
Pseudocapacitance of MXene nanosheets for high-power sodium-ion hybrid capacitors
Wang, X., Kajiyama, S., Iinuma, H., Hosono, E., Oro, S., Moriguchi, I., Okubo, M., & Yamada, A. (2015) · Nature Communications · doi:10.1038/ncomms7544 · Cited by 1,145
Zhu, D., Zhang, L., Ruther, R. E., & Hamers, R. J. (2013) · Nature Materials · doi:10.1038/nmat3696 · Cited by 1,056
Han, M., Yin, X., Wu, H., Hou, Z., Song, C., Li, X., Zhang, L., & Cheng, L. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b06455 · Cited by 996
Spectrophotometric Method for Determination of Hydrazine
Watt, G. W., & Chrisp, J. D. (1952) · Analytical Chemistry · doi:10.1021/ac60072a044 · Cited by 945
Zhang, L., Ji, X., Ren, X., Ma, Y., Shi, X., Tian, Z., Asiri, A. M., Chen, L., Tang, B., & Sun, X. (2018) · Advanced Materials · doi:10.1002/adma.201800191 · Cited by 878
Light-driven dinitrogen reduction catalyzed by a CdS:nitrogenase MoFe protein biohybrid
Brown, K. A., Harris, D. F., Wilker, M. B., Rasmussen, A., Khadka, N., Hamby, H., Keable, S., Dukovic, G., Peters, J. W., Seefeldt, L. C., et al. (2016) · Science · doi:10.1126/science.aaf2091 · Cited by 868
Qiu, B., Xing, M., & Zhang, J. (2014) · Journal of the American Chemical Society · doi:10.1021/ja500873u · Cited by 777
Interwoven MXene Nanosheet/Carbon‐Nanotube Composites as Li–S Cathode Hosts
Liang, X., Rangom, Y., Kwok, C. Y., Pang, Q., & Nazar, L. F. (2017) · Advanced Materials · doi:10.1002/adma.201603040 · Cited by 759
Liu, Y., Zhang, P., Sun, N., Anasori, B., Zhu, Q., Liu, H., Gogotsi, Y., & Xu, B. (2018) · Advanced Materials · doi:10.1002/adma.201707334 · Cited by 759
Qiu, W., Xie, X.-Y., Qiu, J., Fang, W.-H., Liang, R., Ren, X., Ji, X., Cui, G., Asiri, A. M., Cui, G., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-05758-5 · Cited by 759
Cheng, H., Ding, L., Chen, G., Zhang, L., Xue, J., & Wang, H. (2018) · Advanced Materials · doi:10.1002/adma.201803694 · Cited by 758
Chen, G.-F., Cao, X., Wu, S., Zeng, X., Ding, L.-X., Zhu, M., & Wang, H. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b04393 · Cited by 626
Li, S., Bao, D., Shi, M., Wulan, B., Yan, J., & Jiang, Q. (2017) · Advanced Materials · doi:10.1002/adma.201700001 · Cited by 609
H2O2assisted room temperature oxidation of Ti2C MXene for Li-ion battery anodes
Ahmed, B., Anjum, D. H., Hedhili, M. N., Gogotsi, Y., & Alshareef, H. N. (2016) · Nanoscale · doi:10.1039/c6nr00002a · Cited by 528
Charging up Stationary Energy Storage
Sutherland, B. R. (2019) · Joule · doi:10.1016/j.joule.2018.12.022 · Cited by 517
Wang, F., Yang, C., Duan, M., Tang, Y., & Zhu, J. (2015) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2015.08.004 · Cited by 450
Self-citationNazemi, M., Panikkanvalappil, S. R., & El-Sayed, M. A. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.04.039 · Cited by 438
Lee, H. K., Koh, C. S. L., Lee, Y. H., Liu, C., Phang, I. Y., Han, X., Tsung, C.-K., & Ling, X. Y. (2018) · Science Advances · doi:10.1126/sciadv.aar3208 · Cited by 411
Liu, H.-M., Han, S.-H., Zhao, Y., Zhu, Y.-Y., Tian, X.-L., Zeng, J.-H., Jiang, J.-X., Xia, B. Y., & Chen, Y. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta10866d · Cited by 409
Zhu, J., Tang, Y., Yang, C., Wang, F., & Cao, M. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0981605jes · Cited by 377
Self-citationHan, J., Liu, Z., Ma, Y., Cui, G., Xie, F., Wang, F., Wu, Y., Gao, S., Xu, Y., & Sun, X. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.07.045 · Cited by 361
Self-citationHigh-Performance N2-to-NH3 Conversion Electrocatalyzed by Mo2C Nanorod
Ren, X., Zhao, J., Wei, Q., Ma, Y., Guo, H., Liu, Q., Wang, Y., Cui, G., Asiri, A. M., Li, B., et al. (2019) · ACS Central Science · doi:10.1021/acscentsci.8b00734 · Cited by 351
Ren, X., Cui, G., Chen, L., Xie, F., Wei, Q., Tian, Z., & Sun, X. (2018) · Chemical Communications · doi:10.1039/c8cc03627f · Cited by 331
MoO3 nanosheets for efficient electrocatalytic N2 fixation to NH3
Han, J., Ji, X., Ren, X., Cui, G., Li, L., Xie, F., Wang, H., Li, B., & Sun, X. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta03974g · Cited by 319
Self-citationAmbient Electrochemical Ammonia Synthesis with High Selectivity on Fe/Fe Oxide Catalyst
Hu, L., Khaniya, A., Wang, J., Chen, G., Kaden, W. E., & Feng, X. (2018) · ACS Catalysis · doi:10.1021/acscatal.8b02585 · Cited by 302
Zhang, Y., Qiu, W., Ma, Y., Luo, Y., Tian, Z., Cui, G., Xie, F., Chen, L., Li, T., & Sun, X. (2018) · ACS Catalysis · doi:10.1021/acscatal.8b02311 · Cited by 293
Zhao, J., Zhang, L., Xie, X.-Y., Li, X., Ma, Y., Liu, Q., Fang, W.-H., Shi, X., Cui, G., & Sun, X. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta09840a · Cited by 275
Ag nanosheets for efficient electrocatalytic N2 fixation to NH3 under ambient conditions
Huang, H., Xia, L., Shi, X., Asiri, A. M., & Sun, X. (2018) · Chemical Communications · doi:10.1039/c8cc06365f · Cited by 268
Suryanto, B. H. R., Kang, C. S. M., Wang, D., Xiao, C., Zhou, F., Azofra, L. M., Cavallo, L., Zhang, X., & MacFarlane, D. R. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00487 · Cited by 248
Zhang, R., Ren, X., Shi, X., Xie, F., Zheng, B., Guo, X., & Sun, X. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b06647 · Cited by 242
Efficient Electrochemical N2 Reduction to NH3 on MoN Nanosheets Array under Ambient Conditions
Zhang, L., Ji, X., Ren, X., Luo, Y., Shi, X., Asiri, A. M., Zheng, B., & Sun, X. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b01438 · Cited by 241
Oxide Thin‐Film Electronics using All‐MXene Electrical Contacts
Wang, Z., Kim, H., & Alshareef, H. N. (2018) · Advanced Materials · doi:10.1002/adma.201706656 · Cited by 237
Room Temperature Oxidation of Ti3C2MXene for Supercapacitor Electrodes
Cao, M., Wang, F., Wang, L., Wu, W., Lv, W., & Zhu, J. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1541714jes · Cited by 211
Self-citationAmbient N2 fixation to NH3 electrocatalyzed by a spinel Fe3O4 nanorod
Liu, Q., Zhang, X., Zhang, B., Luo, Y., Cui, G., Xie, F., & Sun, X. (2018) · Nanoscale · doi:10.1039/c8nr04524k · Cited by 205
Zhang, R., Zhang, Y., Ren, X., Cui, G., Asiri, A. M., Zheng, B., & Sun, X. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b01261 · Cited by 193
Yang, E., Ji, H., Kim, J., Kim, H., & Jung, Y. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp05140h · Cited by 189
Lv, C., Yan, C., Chen, G., Ding, Y., Sun, J., Zhou, Y., & Yu, G. (2018) · Angewandte Chemie · doi:10.1002/ange.201801538 · Cited by 186
Zhang, X., Liu, Q., Shi, X., Asiri, A. M., Luo, Y., Sun, X., & Li, T. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta05627g · Cited by 176
Yang, C., Tang, Y., Tian, Y., Luo, Y., He, Y., Yin, X., & Que, W. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705487 · Cited by 160
Kugler, K., Luhn, M., Schramm, J. A., Rahimi, K., & Weßling, M. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp05501b · Cited by 151
Zhu, X., Liu, Z., Liu, Q., Luo, Y., Shi, X., Asiri, A. M., Wu, Y., & Sun, X. (2018) · Chemical Communications · doi:10.1039/c8cc06366d · Cited by 151
Self-citationXu, G., Niu, Y., Yang, X., Jin, Z., Wang, Y., Xu, Y., & Niu, H. (2018) · Advanced Optical Materials · doi:10.1002/adom.201800951 · Cited by 131
Self-citationAmmonia Synthesis from Electrocatalytic N 2 Reduction under Ambient Conditions by Fe 2 O 3 Nanorods
Xiang, X., Wang, Z., Shi, X., Fan, M., & Sun, X. (2018) · ChemCatChem · doi:10.1002/cctc.201801208 · Cited by 120
Pan, H. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta06259d · Cited by 95
Xu, G., Wang, X., Gong, S., Wei, S., Liu, J., & Xu, Y. (2018) · Nanotechnology · doi:10.1088/1361-6528/aac8f6 · Cited by 83
Self-citationService, R. F. (2014) · Science · doi:10.1126/science.345.6197.614 · Cited by 70
Dynamic Self‐Assembly Encodes A Tri‐stable Au–TiO2 Photocatalyst
Zhang, Q., Wang, W., Yu, J., Qu, D., & Tian, H. (2016) · Advanced Materials · doi:10.1002/adma.201604948 · Cited by 63
Niu, P., Wu, T., Wen, L., Tan, J., Yang, Y., Zheng, S., Liang, Y., Li, F., Irvine, J. T. S., Liu, G., et al. (2018) · Advanced Materials · doi:10.1002/adma.201705999 · Cited by 56
Cited by
Guo, X., Gu, J., Lin, S., Zhang, S., Chen, Z., & Huang, S. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.9b13349 · Cited by 1,151
Lim, K. R. G., Handoko, A. D., Nemani, S. K., Wyatt, B., Jiang, H.-Y., Tang, J., Anasori, B., & Seh, Z. W. (2020) · ACS Nano · doi:10.1021/acsnano.0c05482 · Cited by 585
Jin, H., Li, L., Liu, X., Tang, C., Xu, W., Chen, S., Song, L., Zheng, Y., & Qiao, S. (2019) · Advanced Materials · doi:10.1002/adma.201902709 · Cited by 531
Comprehensive Understanding of the Thriving Ambient Electrochemical Nitrogen Reduction Reaction
Zhao, X., Hu, G., Chen, G., Zhang, H., Zhang, S., & Wang, H. (2021) · Advanced Materials · doi:10.1002/adma.202007650 · Cited by 503
3D MXene Architectures for Efficient Energy Storage and Conversion
Li, K., Liang, M., Wang, H., Wang, X., Huang, Y., Coelho, J., Pinilla, S., Zhang, Y., Qi, F., Nicolosi, V., et al. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000842 · Cited by 498
Self-citation
Metadata
- Authors
- Fang, Y., Liu, Z., Han, J., Jin, Z., Han, Y., Wang, F., Niu, Y., Wu, Y., & Xu, Y.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2019-02-28
- Volume
- 9
- Issue
- 16
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2920465743
- Cited by
- 427
- References
- 59
- FWCI
- 14.34
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.