The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Microstructure‐Controlled Ni‐Rich Cathode Material by Microscale Compositional Partition for Next‐Generation Electric Vehicles
Abstract
A multicompositional particulate Li[Ni 0.9 Co 0.05 Mn 0.05]O 2 cathode in which Li[Ni 0.94 Co 0.038 Mn 0.022]O 2 at the particle center is encapsulated by a 1.5 µm thick concentration gradient (CG) shell with the outermost surface composition Li[Ni 0.841 Co 0.077 Mn 0.082]O 2 is synthesized using a differential coprecipitation process. The microscale compositional partitioning at the particle level combined with the radial texturing of the refined primary particles in the CG shell layer protracts the detrimental H2 → H3 phase transition, causing sharp changes in the unit cell dimensions. This protraction, confirmed by in situ X‐ray diffraction and transmission electron microscopy, allows effective dissipation of the internal strain generated upon the H2 → H3 phase transition, markedly improving cycling performance and thermochemical stability as compared to those of the conventional single‐composition Li[Ni 0.9 Co 0.05 Mn 0.05]O 2 cathodes. The compositionally partitioned cathode delivers a discharge capacity of 229 mAh g−1 and exhibits capacity retention of 88% after 1000 cycles in a pouch‐type full cell (compared to 68% for the conventional cathode). Thus, the proposed cathode material provides an opportunity for the rational design and development of a wide range of multifunctional cathodes, especially for Ni‐rich Li[Ni x Co y Mn 1‐x‐y]O 2 cathodes, by compositionally partitioning the cathode particles and thus optimizing the microstructural response to the internal strain produced in the deeply charged state.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Noh, H.-J., Youn, S., Yoon, C. S., & Sun, Y.-K. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.01.063 · Cited by 2,302
Self-citationRyu, H.-H., Park, K.-J., Yoon, C. S., & Sun, Y.-K. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b05269 · Cited by 1,629
Self-citationHigh-energy cathode material for long-life and safe lithium batteries
Sun, Y.-K., Myung, S.-T., Park, B.-C., Prakash, J., Belharouak, I., & Amine, K. (2009) · Nature Materials · doi:10.1038/nmat2418 · Cited by 1,519
Self-citationLayered Lithium Insertion Material of LiCo1/3Ni1/3Mn1/3O2 for Lithium-Ion Batteries
Ohzuku, T., & Makimura, Y. (2001) · Chemistry Letters · doi:10.1246/cl.2001.642 · Cited by 1,388
Electrochemistry and Structural Chemistry of LiNiO2 (R3m) for 4 Volt Secondary Lithium Cells
Ohzuku, T., Ueda, A., & Nagayama, M. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2220730 · Cited by 1,384
Bak, S.-M., Hu, E., Zhou, Y., Yu, X., Senanayake, S. D., Cho, S.-J., Kim, K.-B., Chung, K. Y., Yang, X.-Q., & Nam, K.-W. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am506712c · Cited by 1,010
Solid‐State Redox Reactions of LiCoO2 (R3m) for 4 Volt Secondary Lithium Cells
Ohzuku, T., & Ueda, A. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2059267 · Cited by 951
Prospects for reducing the processing cost of lithium ion batteries
Wood, D. L., Li, J., & Daniel, C. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.11.019 · Cited by 827
Yan, P., Zheng, J., Liu, J., Wang, B., Cheng, X., Zhang, Y., Sun, X., Wang, C., & Zhang, J.-G. (2018) · Nature Energy · doi:10.1038/s41560-018-0191-3 · Cited by 826
Structure and electrochemistry of Li1±yNiO2 and a new Li2NiO2 phase with the Ni (OH)2 structure
Dahn, J. (1990) · Solid State Ionics · doi:10.1016/0167-2738(90)90049-w · Cited by 806
Kondrakov, A. O., Schmidt, A., Xu, J., Geßwein, H., Mönig, R., Hartmann, P., Sommer, H., Brezesinski, T., & Janek, J. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b12885 · Cited by 701
Watanabe, S., Kinoshita, M., Hosokawa, T., Morigaki, K., & Nakura, K. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.02.018 · Cited by 465
de Biasi, L., Kondrakov, A. O., Geßwein, H., Brezesinski, T., Hartmann, P., & Janek, J. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b06363 · Cited by 374
Hwang, S., Chang, W., Kim, S. M., Su, D., Kim, D. H., Lee, J. Y., Chung, K. Y., & Stach, E. A. (2014) · Chemistry of Materials · doi:10.1021/cm403332s · Cited by 346
Surface changes on LiNi0.8Co0.2O2 particles during testing of high-power lithium-ion cells
Abraham, D. P., Twesten, R. D., Balasubramanian, M., Petrov, I., McBreen, J., & Amine, K. (2002) · Electrochemistry Communications · doi:10.1016/s1388-2481(02)00388-0 · Cited by 312
Lee, J. H., Yoon, C. S., Hwang, J.-Y., Kim, S.-J., Maglia, F., Lamp, P., Myung, S.-T., & Sun, Y.-K. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01134a · Cited by 310
Self-citationIntrinsic Origins of Crack Generation in Ni-rich LiNi0.8Co0.1Mn0.1O2 Layered Oxide Cathode Material
Lim, J.-M., Hwang, T., Kim, D., Park, M.-S., Cho, K., & Cho, M. (2017) · Scientific Reports · doi:10.1038/srep39669 · Cited by 305
Structure and electrochemistry of Li Mn Ni1−O2
Rossen, E., Jones, C. D. W., & Dahn, J. R. (1992) · Solid State Ionics · doi:10.1016/0167-2738(92)90164-k · Cited by 282
Xiao, B., & Sun, X. A. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802057 · Cited by 280
Yoon, C. S., Ryu, H.-H., Park, G.-T., Kim, J.-H., Kim, K.-H., & Sun, Y.-K. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta11346c · Cited by 263
Self-citationWu, L., Nam, K.-W., Wang, X., Zhou, Y., Zheng, J.-C., Yang, X.-Q., & Zhu, Y. (2011) · Chemistry of Materials · doi:10.1021/cm201452q · Cited by 245
Self-Passivation of a LiNiO2 Cathode for a Lithium-Ion Battery through Zr Doping
Yoon, C. S., Kim, U.-H., Park, G.-T., Kim, S. J., Kim, K.-H., Kim, J., & Sun, Y.-K. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00805 · Cited by 219
Self-citationKim, U.-H., Myung, S.-T., Yoon, C. S., & Sun, Y.-K. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00613 · Cited by 203
Self-citationLim, B., Yoon, S., Park, K., Yoon, C. S., Kim, S., Lee, J. J., & Sun, Y. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201501430 · Cited by 144
Self-citationSun, H. H., Choi, W., Lee, J. K., Oh, I., & Jung, H. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.11.075 · Cited by 135
Cited by
Lithium–Oxygen Batteries and Related Systems: Potential, Status, and Future
Kwak, W.-J., Rosy, Sharon, D., Xia, C., Kim, H., Johnson, L. R., Bruce, P. G., Nazar, L. F., Sun, Y.-K., Frimer, A. A., et al. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00609 · Cited by 1,009
Self-citationKim, U.-H., Park, G.-T., Son, B.-K., Nam, G. W., Liu, J., Kuo, L.-Y., Kaghazchi, P., Yoon, C. S., & Sun, Y.-K. (2020) · Nature Energy · doi:10.1038/s41560-020-00693-6 · Cited by 540
Self-citationCapacity Fading of Ni-Rich NCA Cathodes: Effect of Microcracking Extent
Nam, G. W., Park, N.-Y., Park, K.-J., Yang, J., Liu, J., Yoon, C. S., & Sun, Y.-K. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b02302 · Cited by 505
Self-citationBattery cost forecasting: a review of methods and results with an outlook to 2050
Mauler, L., Duffner, F., Zeier, W. G., & Leker, J. (2021) · Energy & Environmental Science · doi:10.1039/d1ee01530c · Cited by 499
Beyond Doping and Coating: Prospective Strategies for Stable High-Capacity Layered Ni-Rich Cathodes
Sun, H. H., Ryu, H.-H., Kim, U.-H., Weeks, J. A., Heller, A., Sun, Y.-K., & Mullins, C. B. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c00191 · Cited by 495
Self-citation
Metadata
- Authors
- Kim, U., Ryu, H., Kim, J., Mücke, R., Kaghazchi, P., Yoon, C. S., & Sun, Y.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2019-02-21
- Volume
- 9
- Issue
- 15
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2916860885
- Cited by
- 298
- References
- 25
- FWCI
- 13.48
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.