The DOI matches its Crossref record; 195 of the 195 references it cites were found in a registry or an index.
Additive Engineering for Efficient and Stable Perovskite Solar Cells
Open accessAbstract
Perovskite solar cells (PSCs) have reached a certified 25.2% efficiency in 2019 due to their high absorption coefficient, high carrier mobility, long diffusion length, and tunable direct bandgap. However, due to the nature of solution processing and rapid crystal growth of perovskite thin films, a variety of defects can form as a result of the precursor compositions and processing conditions. The use of additives can affect perovskite crystallization and film formation, defect passivation in the bulk and/or at the surface, as well as influence the interface tuning of structure and energetics. Here, recent progress in additive engineering during perovskite film formation is discussed according to the following common categories: Lewis acid (e.g., metal cations, fullerene derivatives), Lewis base based on the donor type (e.g., O‐donor, S‐donor, and N‐donor), ammonium salts, low‐dimensional perovskites, and ionic liquid. Various additive‐assisted strategies for interface optimization are then summarized; additives include modifiers to improve electron‐ and hole‐transport layers as well as those to modify perovskite surface properties. Finally, an outlook is provided on research trends with respect to additive engineering in PSC development.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Kroto, H. W., Heath, J. R., O’Brien, S. C., Curl, R. F., & Smalley, R. E. (1985) · Nature · doi:10.1038/318162a0 · Cited by 16,083
Room-Temperature Ionic Liquids. Solvents for Synthesis and Catalysis
Welton, T. (1999) · Chemical Reviews · doi:10.1021/cr980032t · Cited by 11,852
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Electron-hole diffusion lengths > 175 μm in solution-grown CH 3 NH 3 PbI 3 single crystals
Dong, Q., Fang, Y., Shao, Y., Mulligan, P., Qiu, J., Cao, L., & Huang, J. (2015) · Science · doi:10.1126/science.aaa5760 · Cited by 5,643
Cited by
Li, X., Hoffman, J. M., & Kanatzidis, M. G. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01006 · Cited by 1,085
Inverted perovskite solar cells using dimethylacridine-based dopants
Tan, Q., Li, Z., Luo, G., Zhang, X., Che, B., Chen, G., Gao, H., He, D., Ma, G., Wang, J., et al. (2023) · Nature · doi:10.1038/s41586-023-06207-0 · Cited by 786
Molecular engineering of contact interfaces for high-performance perovskite solar cells
Isikgor, F. H., Zhumagali, S., T. Merino, L. V., De Bastiani, M., McCulloch, I., & De Wolf, S. (2022) · Nature Reviews Materials · doi:10.1038/s41578-022-00503-3 · Cited by 600
Materials and Methods for Interface Engineering toward Stable and Efficient Perovskite Solar Cells
Chen, J., & Park, N.-G. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c01240 · Cited by 521
Dunfield, S. P., Bliss, L., Zhang, F., Luther, J. M., Zhu, K., van Hest, M. F. A. M., Reese, M. O., & Berry, J. J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201904054 · Cited by 435
Self-citationRationalization of passivation strategies toward high-performance perovskite solar cells
Zhang, Z., Qiao, L., Meng, K., Long, R., Chen, G., & Gao, P. (2023) · Chemical Society Reviews · doi:10.1039/d2cs00217e · Cited by 357
Mohd Yusoff, A. R. B., Vasilopoulou, M., Georgiadou, D. G., Palilis, L. C., Abate, A., & Nazeeruddin, M. K. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00062d · Cited by 327
Chu, Z., Ye, Q., Zhao, Y., Ma, F., Yin, Z., Zhang, X., & You, J. (2021) · Advanced Materials · doi:10.1002/adma.202007169 · Cited by 324
Cao, Q., Li, Y., Zhang, H., Yang, J., Han, J., Xu, T., Wang, S., Wang, Z., Gao, B., Zhao, J., et al. (2021) · Science Advances · doi:10.1126/sciadv.abg0633 · Cited by 322
The Promise and Challenges of Inverted Perovskite Solar Cells
Chen, P., Xiao, Y., Li, S., Jia, X., Luo, D., Zhang, W., Snaith, H. J., Gong, Q., & Zhu, R. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00073 · Cited by 297
Gharibzadeh, S., Fassl, P., Hossain, I. M., Rohrbeck, P., Frericks, M., Schmidt, M., Duong, T., Khan, M. R., Abzieher, T., Nejand, B. A., et al. (2021) · Energy & Environmental Science · doi:10.1039/d1ee01508g · Cited by 289
Recent progress in morphology optimization in perovskite solar cell
Tailor, N. K., Abdi-Jalebi, M., Gupta, V., Hu, H., Dar, M. I., Li, G., & Satapathi, S. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta00143k · Cited by 268
Ion-induced field screening as a dominant factor in perovskite solar cell operational stability
Thiesbrummel, J., Shah, S., Gutierrez-Partida, E., Zu, F., Peña-Camargo, F., Zeiske, S., Diekmann, J., Ye, F., Peters, K. P., Brinkmann, K. O., et al. (2024) · Nature Energy · doi:10.1038/s41560-024-01487-w · Cited by 267
Mai, H., Chen, D., Tachibana, Y., Suzuki, H., Abe, R., & Caruso, R. A. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00684c · Cited by 254
Recent progress in perovskite solar cells: from device to commercialization
Luo, X., Lin, X., Gao, F., Zhao, Y., Li, X., Zhan, L., Qiu, Z., Wang, J., Chen, C., Meng, L., et al. (2022) · Science China Chemistry · doi:10.1007/s11426-022-1426-x · Cited by 142
Mechanical Durability and Flexibility in Perovskite Photovoltaics: Advancements and Applications
Song, F., Zheng, D., Feng, J., Liu, J., Ye, T., Li, Z., Wang, K., Liu, S. (., & Yang, D. (2024) · Advanced Materials · doi:10.1002/adma.202312041 · Cited by 113
Materials and methods for cost-effective fabrication of perovskite photovoltaic devices
Zhang, C., & Park, N.-G. (2024) · Communications Materials · doi:10.1038/s43246-024-00636-8 · Cited by 72
Qiu, M., Li, W., Luo, Y., Zhao, C., Zhao, Z., & Mai, W. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202418064 · Cited by 15
Metadata
- Authors
- Zhang, F., & Zhu, K.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2019-10-04
- Volume
- 10
- Issue
- 13
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2977917184
- Cited by
- 805
- References
- 195
- FWCI
- 32.34
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.