The DOI matches its Crossref record; 73 of the 73 references it cites were found in a registry or an index.
High‐Performance GeTe‐Based Thermoelectrics: from Materials to Devices
Open accessAbstract
High‐performance GeTe‐based thermoelectrics have been recently attracting growing research interest. Here, an overview is presented of the structural and electronic band characteristics of GeTe. Intrinsically, compared to low‐temperature rhombohedral GeTe, the high‐symmetry and high‐temperature cubic GeTe has a low energy offset between L and Σ points of the valence band, the reduced direct bandgap and phonon group velocity, and as a result, high thermoelectric performance. Moreover, their thermoelectric performance can be effectively enhanced through either carrier concentration optimization, band structure engineering (bandgap reduction, band degeneracy, and resonant state engineering), or restrained lattice thermal conductivity (phonon velocity reduction or phonon scattering). Consequently, the dimensionless figure of merit, ZT values, of GeTe‐based thermoelectric materials can be higher than 2. The mechanical and thermal stabilities of GeTe‐based thermoelectrics are highlighted, and it is found that they are suitable for practical thermoelectric applications except for their high cost. Finally, it is recognized that the performance of GeTe‐based materials can be further enhanced through synergistic effects. Additionally, proper material selection and module design can further boost the energy conversion efficiency of GeTe‐based thermoelectrics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Complex thermoelectric materials
Snyder, G. J., & Toberer, E. S. (2008) · Nature Materials · doi:10.1038/nmat2090 · Cited by 11,455
High-performance bulk thermoelectrics with all-scale hierarchical architectures
Biswas, K., He, J., Blum, I. D., Wu, C.-I., Hogan, T. P., Seidman, D. N., Dravid, V. P., & Kanatzidis, M. G. (2012) · Nature · doi:10.1038/nature11439 · Cited by 4,740
Enhancement of Thermoelectric Efficiency in PbTe by Distortion of the Electronic Density of States
Heremans, J. P., Jovovic, V., Toberer, E. S., Saramat, A., Kurosaki, K., Charoenphakdee, A., Yamanaka, S., & Snyder, G. J. (2008) · Science · doi:10.1126/science.1159725 · Cited by 4,161
Rationally Designing High-Performance Bulk Thermoelectric Materials
Tan, G., Zhao, L.-D., & Kanatzidis, M. G. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00255 · Cited by 2,355
Efficiency of a Carnot engine at maximum power output
Curzon, F. L., & Ahlborn, B. (1975) · American Journal of Physics · doi:10.1119/1.10023 · Cited by 2,317
Williamson-Hall analysis in estimation of lattice strain in nanometer-sized ZnO particles
Mote, V. D., Purushotham, Y., & Dole, B. N. (2012) · Journal of theoretical and applied physics · doi:10.1186/2251-7235-6-6 · Cited by 2,232
Copper ion liquid-like thermoelectrics
Liu, H., Shi, X., Xu, F., Zhang, L., Zhang, W., Chen, L., Li, Q., Uher, C., Day, T., & Snyder, G. J. (2012) · Nature Materials · doi:10.1038/nmat3273 · Cited by 2,118
Compromise and Synergy in High‐Efficiency Thermoelectric Materials
Zhu, T., Liu, Y., Fu, C., Heremans, J. P., Snyder, J. G., & Zhao, X. (2017) · Advanced Materials · doi:10.1002/adma.201605884 · Cited by 1,616
The Scattering of Low-Frequency Lattice Waves by Static Imperfections
Klemens, P. G. (1955) · Proceedings of the Physical Society. Section A · doi:10.1088/0370-1298/68/12/303 · Cited by 1,457
Realizing high figure of merit in heavy-band p-type half-Heusler thermoelectric materials
Fu, C., Bai, S., Liu, Y., et al. (2015) · Nature Communications · doi:10.1038/ncomms9144 · Cited by 1,213
Waste heat recovery technologies and applications
Jouhara, H., Khordehgah, N., Almahmoud, S., Delpech, B., Chauhan, A., & Tassou, S. A. (2018) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2018.04.017 · Cited by 1,210
The panoscopic approach to high performance thermoelectrics
Zhao, L.-D., Dravid, V. P., & Kanatzidis, M. G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee43099e · Cited by 997
Resonant levels in bulk thermoelectric semiconductors
Heremans, J. P., Wiendlocha, B., & Chamoire, A. M. (2012) · Energy Environ. Sci. · doi:10.1039/c1ee02612g · Cited by 965
High Performance Thermoelectric Materials: Progress and Their Applications
Yang, L., Chen, Z., Dargusch, M. S., & Zou, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701797 · Cited by 958
Self-citationPhonon engineering through crystal chemistry
Toberer, E. S., Zevalkink, A., & Snyder, G. J. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm11754h · Cited by 945
Thinking Like a Chemist: Intuition in Thermoelectric Materials
Zeier, W. G., Zevalkink, A., Gibbs, Z. M., Hautier, G., Kanatzidis, M. G., & Snyder, G. J. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201508381 · Cited by 882
Kim, W., Zide, J., Gossard, A., Klenov, D., Stemmer, S., Shakouri, A., & Majumdar, A. (2006) · Physical Review Letters · doi:10.1103/physrevlett.96.045901 · Cited by 864
Stereochemistry of post-transition metal oxides: revision of the classical lone pair model
Walsh, A., Payne, D. J., Egdell, R. G., & Watson, G. W. (2011) · Chemical Society Reviews · doi:10.1039/c1cs15098g · Cited by 832
High thermoelectric performance by resonant dopant indium in nanostructured SnTe
Zhang, Q., Liao, B., Lan, Y., Lukas, K., Liu, W., Esfarjani, K., Opeil, C., Broido, D., Chen, G., & Ren, Z. (2013) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1305735110 · Cited by 789
Self-citationFlexible Thermoelectric Materials and Generators: Challenges and Innovations
Wang, Y., Yang, L., Shi, X., Shi, X., Chen, L., Dargusch, M. S., Zou, J., & Chen, Z. (2019) · Advanced Materials · doi:10.1002/adma.201807916 · Cited by 751
Self-citationTheory of enhancement of thermoelectric properties of materials with nanoinclusions
Faleev, S. V., & Léonard, F. (2008) · Physical Review B · doi:10.1103/physrevb.77.214304 · Cited by 695
Zintl Chemistry for Designing High Efficiency Thermoelectric Materials
Toberer, E. S., May, A. F., & Snyder, G. J. (2010) · Chemistry of Materials · doi:10.1021/cm901956r · Cited by 683
Non-equilibrium processing leads to record high thermoelectric figure of merit in PbTe–SrTe
Tan, G., Shi, F., Hao, S., Zhao, L.-D., Chi, H., Zhang, X., Uher, C., Wolverton, C., Dravid, V. P., & Kanatzidis, M. G. (2016) · Nature Communications · doi:10.1038/ncomms12167 · Cited by 665
Low effective mass leading to high thermoelectric performance
Pei, Y., LaLonde, A. D., Wang, H., & Snyder, G. J. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21536e · Cited by 655
High thermoelectric performance in low-cost SnS 0.91 Se 0.09 crystals
He, W., Wang, D., Wu, H., Xiao, Y., Zhang, Y., He, D., Feng, Y., Hao, Y.-J., Dong, J.-F., Chetty, R., et al. (2019) · Science · doi:10.1126/science.aax5123 · Cited by 610
Self-citationHigh-performance SnSe thermoelectric materials: Progress and future challenge
Chen, Z.-G., Shi, X., Zhao, L.-D., & Zou, J. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.04.005 · Cited by 597
Self-citationMao, J., Liu, Z., Zhou, J., Zhu, H., Zhang, Q., Chen, G., & Ren, Z. (2018) · Advances in Physics · doi:10.1080/00018732.2018.1551715 · Cited by 592
Low-Symmetry Rhombohedral GeTe Thermoelectrics
Li, J., Zhang, X., Chen, Z., Lin, S., Li, W., Shen, J., Witting, I. T., Faghaninia, A., Chen, Y., Jain, A., et al. (2018) · Joule · doi:10.1016/j.joule.2018.02.016 · Cited by 583
Self-citationCurrent progress and future challenges in thermoelectric power generation: From materials to devices
Liu, W., Jie, Q., Kim, H. S., & Ren, Z. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.12.042 · Cited by 581
Self-citationRecent advances in high-performance bulk thermoelectric materials
Shi, X., Chen, L., & Uher, C. (2016) · International Materials Reviews · doi:10.1080/09506608.2016.1183075 · Cited by 494
High performance bulk thermoelectrics via a panoscopic approach
He, J., Kanatzidis, M. G., & Dravid, V. P. (2013) · Materials Today · doi:10.1016/j.mattod.2013.05.004 · Cited by 487
Room-temperature ductile inorganic semiconductor
Shi, X., Chen, H., Hao, F., Liu, R., Wang, T., Qiu, P., Burkhardt, U., Grin, Y., & Chen, L. (2018) · Nature Materials · doi:10.1038/s41563-018-0047-z · Cited by 466
Lead telluride as a thermoelectric material for thermoelectric power generation
Dughaish, Z. H. (2002) · Physica B: Condensed Matter · doi:10.1016/s0921-4526(02)01187-0 · Cited by 457
Designing thermoelectric generators for self-powered wearable electronics
Suarez, F., Nozariasbmarz, A., Vashaee, D., & Öztürk, M. C. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00456c · Cited by 431
Charge and phonon transport in PbTe-based thermoelectric materials
Xiao, Y., & Zhao, L.-D. (2018) · npj Quantum Materials · doi:10.1038/s41535-018-0127-y · Cited by 425
Eco‐Friendly SnTe Thermoelectric Materials: Progress and Future Challenges
Moshwan, R., Yang, L., Zou, J., & Chen, Z. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201703278 · Cited by 424
Self-citationThermal conductivity of germanium crystals with different isotopic compositions
Asen-Palmer, M., Bartkowski, K., Gmelin, E., Cardona, M., Zhernov, A. P., Inyushkin, A. V., Taldenkov, A., Ozhogin, V. I., Itoh, K. M., & Haller, E. E. (1997) · Physical Review B · doi:10.1103/physrevb.56.9431 · Cited by 415
Zheng, Z., Su, X., Deng, R., Stoumpos, C., Xie, H., Liu, W., Yan, Y., Hao, S., Uher, C., Wolverton, C., et al. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.7b13611 · Cited by 415
Self-citationMinimum thermal conductivity in the context of diffuson -mediated thermal transport
Agne, M. T., Hanus, R. C., & Snyder, G. J. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03256k · Cited by 393
Routes for high-performance thermoelectric materials
Zhou, X., Yan, Y., Lu, X., Zhu, H., Han, X., Chen, G., & Ren, Z. (2018) · Materials Today · doi:10.1016/j.mattod.2018.03.039 · Cited by 393
Origin of the High Performance in GeTe-Based Thermoelectric Materials upon Bi2Te3 Doping
Wu, D., Zhao, L.-D., Hao, S., Jiang, Q., Zheng, F., Doak, J. W., Wu, H., Chi, H., Gelbstein, Y., Uher, C., et al. (2014) · Journal of the American Chemical Society · doi:10.1021/ja504896a · Cited by 388
Defect Engineering in Multinary Earth‐Abundant Chalcogenide Photovoltaic Materials
Shin, D., Saparov, B., & Mitzi, D. B. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602366 · Cited by 357
Strategies for engineering phonon transport in thermoelectrics
Kim, W. (2015) · Journal of Materials Chemistry C · doi:10.1039/c5tc01670c · Cited by 348
High‐Performance Pseudocubic Thermoelectric Materials from Non‐cubic Chalcopyrite Compounds
Zhang, J., Liu, R., Cheng, N., Zhang, Y., Yang, J., Uher, C., Shi, X., Chen, L., & Zhang, W. (2014) · Advanced Materials · doi:10.1002/adma.201400058 · Cited by 334
Electronic structure of tin monochalcogenides from SnO to SnTe
Lefebvre, I., Szymanski, M. A., Olivier-Fourcade, J., & Jumas, J. C. (1998) · Physical Review B · doi:10.1103/physrevb.58.1896 · Cited by 316
Thermoelectric GeTe with Diverse Degrees of Freedom Having Secured Superhigh Performance
Hong, M., Zou, J., & Chen, Z. (2019) · Advanced Materials · doi:10.1002/adma.201807071 · Cited by 291
Self-citationLiu, Z., Sun, J., Mao, J., Zhu, H., Ren, W., Zhou, J., Wang, Z., Singh, D. J., Sui, J., Chu, C.-W., et al. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1802020115 · Cited by 272
Hong, M., Wang, Y., Feng, T., Sun, Q., Xu, S., Matsumura, S., Pantelides, S. T., Zou, J., & Chen, Z.-G. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.8b12624 · Cited by 272
Self-citationChalcogenide Thermoelectrics Empowered by an Unconventional Bonding Mechanism
Yu, Y., Cagnoni, M., Cojocaru‐Mirédin, O., & Wuttig, M. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201904862 · Cited by 272
Promising and Eco‐Friendly Cu2X‐Based Thermoelectric Materials: Progress and Applications
Liu, W., Yang, L., Chen, Z., & Zou, J. (2020) · Advanced Materials · doi:10.1002/adma.201905703 · Cited by 252
Self-citationHigh‐Performance Thermoelectric SnSe: Aqueous Synthesis, Innovations, and Challenges
Shi, X., Tao, X., Zou, J., & Chen, Z. (2020) · Advanced Science · doi:10.1002/advs.201902923 · Cited by 252
Self-citationSamanta, M., & Biswas, K. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b05143 · Cited by 248
Complex Band Structures and Lattice Dynamics of Bi2Te3‐Based Compounds and Solid Solutions
Fang, T., Li, X., Hu, C., Zhang, Q., Yang, J., Zhang, W., Zhao, X., Singh, D. J., & Zhu, T. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900677 · Cited by 228
Banik, A., Ghosh, T., Arora, R., Dutta, M., Pandey, J., Acharya, S., Soni, A., Waghmare, U. V., & Biswas, K. (2019) · Energy & Environmental Science · doi:10.1039/c8ee03162b · Cited by 225
Xu, S., Hong, M., Shi, X.-L., Wang, Y., Ge, L., Bai, Y., Wang, L., Dargusch, M., Zou, J., & Chen, Z.-G. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b01500 · Cited by 222
Self-citationBoundary scattering of phonons in solid solutions
Goldsmid, H. J., & Penn, A. W. (1968) · Physics Letters A · doi:10.1016/0375-9601(68)90898-0 · Cited by 212
Establishing the Golden Range of Seebeck Coefficient for Maximizing Thermoelectric Performance
Hong, M., Lyu, W., Wang, Y., Zou, J., & Chen, Z. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.9b13272 · Cited by 210
Self-citationTexture-dependent thermoelectric properties of nano-structured Bi2Te3
Bao, D., Chen, J., Yu, Y., Liu, W., Huang, L., Han, G., Tang, J., Zhou, D., Yang, L., & Chen, Z.-G. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124295 · Cited by 207
Self-citationPolycrystalline SnSe with Extraordinary Thermoelectric Property via Nanoporous Design
Shi, X., Wu, A., Liu, W., Moshwan, R., Wang, Y., Chen, Z.-G., & Zou, J. (2018) · ACS Nano · doi:10.1021/acsnano.8b06387 · Cited by 190
Self-citationWang, Y., Liu, W.-D., Shi, X.-L., Hong, M., Wang, L.-J., Li, M., Wang, H., Zou, J., & Chen, Z.-G. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.123513 · Cited by 164
Self-citationSolid‐State Explosive Reaction for Nanoporous Bulk Thermoelectric Materials
Zhao, K., Duan, H., Raghavendra, N., Qiu, P., Zeng, Y., Zhang, W., Yang, J., Shi, X., & Chen, L. (2017) · Advanced Materials · doi:10.1002/adma.201701148 · Cited by 163
Eco‐Friendly Higher Manganese Silicide Thermoelectric Materials: Progress and Future Challenges
Liu, W., Chen, Z., & Zou, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800056 · Cited by 159
Self-citationRoychowdhury, S., Samanta, M., Perumal, S., & Biswas, K. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b02676 · Cited by 159
Valleytronics in thermoelectric materials
Xin, J., Tang, Y., Liu, Y., Zhao, X., Pan, H., & Zhu, T. (2018) · npj Quantum Materials · doi:10.1038/s41535-018-0083-6 · Cited by 149
Boosting the Thermoelectric Performance of Pseudo‐Layered Sb2Te3(GeTe)n via Vacancy Engineering
Xu, X. C., Xie, L. H., Lou, Q., Wu, D., & He, J. (2018) · Advanced Science · doi:10.1002/advs.201801514 · Cited by 133
Luo, Z., Zhang, X., Hua, X., Tan, G., Bailey, T. P., Xu, J., Uher, C., Wolverton, C. M., Dravid, V. P., Yan, Q., et al. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801617 · Cited by 121
Short-range order in defective half-Heusler thermoelectric crystals
Xia, K., Nan, P., Tan, S.-H., Wang, Y., Ge, B., Zhang, W., Anand, S., Zhao, X., Snyder, G. J., & Zhu, T. (2019) · Energy & Environmental Science · doi:10.1039/c8ee03654c · Cited by 119
Samanta, M., Ghosh, T., Arora, R., Waghmare, U. V., & Biswas, K. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b11405 · Cited by 110
Li, J., Xie, Y., Zhang, C., Ma, K., Liu, F., Ao, W., Li, Y., & Zhang, C. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b04984 · Cited by 96
Intrinsic anharmonic localization in thermoelectric PbSe
Manley, M. E., Hellman, O., Shulumba, N., May, A. F., Stonaha, P. J., Lynn, J. W., Garlea, V. O., Alatas, A., Hermann, R. P., Budai, J. D., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-09921-4 · Cited by 81
Wang, L., Li, J., Zhang, C., Ding, T., Xie, Y., Li, Y., Liu, F., Ao, W., & Zhang, C. (2020) · Journal of Materials Chemistry A · doi:10.1039/c9ta11901a · Cited by 53
Microhardness in PbTe and related alloys
Crocker, A. J., & Wilson, M. (1978) · Journal of Materials Science · doi:10.1007/bf00570520 · Cited by 45
Understanding the superior thermoelectric performance of Sb precipitated Ge 17 Sb 2 Te 20
Williams, J. B., & Morelli, D. T. (2016) · Journal of Materials Chemistry C · doi:10.1039/c6tc03789e · Cited by 27
Cited by
Advanced Thermoelectric Design: From Materials and Structures to Devices
Shi, X.-L., Zou, J., & Chen, Z.-G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00026 · Cited by 2,524
Self-citationDefect engineering in thermoelectric materials: what have we learned?
Zheng, Y., Slade, T. J., Hu, L., Tan, X. Y., Luo, Y., Luo, Z.-Z., Xu, J., Yan, Q., & Kanatzidis, M. G. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00347j · Cited by 482
Flexible thermoelectric materials and devices: From materials to applications
Zhang, L., Shi, X.-L., Yang, Y.-L., & Chen, Z.-G. (2021) · Materials Today · doi:10.1016/j.mattod.2021.02.016 · Cited by 454
Self-citationSrTiO3-based thermoelectrics: Progress and challenges
Shi, X.-L., Wu, H., Liu, Q., Zhou, W., Lu, S., Shao, Z., Dargusch, M., & Chen, Z.-G. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.105195 · Cited by 259
Self-citation
Metadata
- Authors
- Liu, W., Wang, D., Liu, Q., Zhou, W., Shao, Z., & Chen, Z.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2020-04-13
- Volume
- 10
- Issue
- 19
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W3017029186
- Cited by
- 307
- References
- 73
- FWCI
- 16.87
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.