The DOI matches its Crossref record; 105 of the 105 references it cites were found in a registry or an index.
Applications of Self‐Assembled Monolayers for Perovskite Solar Cells Interface Engineering to Address Efficiency and Stability
Open accessAbstract
Due to a certified 25.2% high efficiency, low cost, and easy fabrication; perovskite solar cells (PSCs) are the focus of interest among the next‐generation photovoltaic technologies. Long‐term stability is one of the most challenging obstacles to bring technology from the lab to the market. In this review, applications of self‐assembled monolayers (SAMs) to enhance the power conversion efficiency (PCE) and stability of PSCs is discussed. In the first part, the introduction of SAMs, and deposition techniques applied to different PSC architectures are described. In the middle section, current efforts to utilize SAMs to fine‐tune the optoelectronic properties to enhance the PCE and stability are detailed. The improvements in surface morphology, energy band alignment, as well as reduced interfacial charge recombination induced by SAMs, and the trap passivation mechanism allowing optimal PCE and stability are described. A general outlook summarizing the importance of SAMs to the improvement of PSCs performance is also given, alongside a discussion of future opportunities and possible research directions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Formation and Structure of Self-Assembled Monolayers
Ulman, A. (1996) · Chemical Reviews · doi:10.1021/cr9502357 · Cited by 7,906
The emergence of perovskite solar cells
Green, M. A., Ho-Baillie, A., & Snaith, H. J. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.134 · Cited by 7,432
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Yella, A., Lee, H.-W., Tsao, H. N., Yi, C., Chandiran, A. K., Nazeeruddin, M. K., Diau, E. W.-G., Yeh, C.-Y., Zakeeruddin, S. M., & Grätzel, M. (2011) · Science · doi:10.1126/science.1209688 · Cited by 5,977
Self-citationYuan, J., Zhang, Y., Zhou, L., Zhang, G., Yip, H.-L., Lau, T.-K., Lu, X., Zhu, C., Peng, H., Johnson, P. A., et al. (2019) · Joule · doi:10.1016/j.joule.2019.01.004 · Cited by 5,883
Nanowire dye-sensitized solar cells
Law, M., Greene, L. E., Johnson, J. C., Saykally, R., & Yang, P. (2005) · Nature Materials · doi:10.1038/nmat1387 · Cited by 5,332
Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Saliba, M., Matsui, T., Domanski, K., Seo, J.-Y., Ummadisingu, A., Zakeeruddin, S. M., Correa-Baena, J.-P., Tress, W. R., Abate, A., Hagfeldt, A., et al. (2016) · Science · doi:10.1126/science.aah5557 · Cited by 3,706
High-efficiency solution-processed perovskite solar cells with millimeter-scale grains
Nie, W., Tsai, H., Asadpour, R., Blancon, J.-C., Neukirch, A. J., Gupta, G., Crochet, J. J., Chhowalla, M., Tretiak, S., Alam, M. A., et al. (2015) · Science · doi:10.1126/science.aaa0472 · Cited by 3,295
Shao, Y., Xiao, Z., Bi, C., Yuan, Y., & Huang, J. (2014) · Nature Communications · doi:10.1038/ncomms6784 · Cited by 3,025
Heo, J. H., Im, S. H., Noh, J. H., Mandal, T. N., Lim, C.-S., Chang, J. A., Lee, Y. H., Kim, H.-J., Sarkar, A., Nazeeruddin, M. K., et al. (2013) · Nature Photonics · doi:10.1038/nphoton.2013.80 · Cited by 2,684
Self-citationLiu, D., & Kelly, T. L. (2014) · Nature Photonics · doi:10.1038/nphoton.2013.342 · Cited by 2,663
Ahn, N., Son, D.-Y., Jang, I.-H., Kang, S. M., Choi, M., & Park, N.-G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04930 · Cited by 2,312
Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers
Chen, W., Wu, Y., Yue, Y., Liu, J., Zhang, W., Yang, X., Chen, H., Bi, E., Ashraful, I., Grätzel, M., et al. (2015) · Science · doi:10.1126/science.aad1015 · Cited by 2,279
Bi, D., Yi, C., Luo, J., Décoppet, J.-D., Zhang, F., Zakeeruddin, S. M., Li, X., Hagfeldt, A., & Grätzel, M. (2016) · Nature Energy · doi:10.1038/nenergy.2016.142 · Cited by 2,037
Eperon, G. E., Burlakov, V. M., Docampo, P., Goriely, A., & Snaith, H. J. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201302090 · Cited by 1,982
ZnO Nanostructures for Dye‐Sensitized Solar Cells
Zhang, Q., Dandeneau, C. S., Zhou, X., & Cao, G. (2009) · Advanced Materials · doi:10.1002/adma.200803827 · Cited by 1,781
Electro-optics of perovskite solar cells
Lin, Q., Armin, A., Nagiri, R. C. R., Burn, P. L., & Meredith, P. (2015) · Nature Photonics · doi:10.1038/nphoton.2014.284 · Cited by 1,749
Perovskite Solar Cells: From Materials to Devices
Jung, H. S., & Park, N. (2015) · Small · doi:10.1002/smll.201402767 · Cited by 1,587
Perovskite-perovskite tandem photovoltaics with optimized band gaps
Eperon, G. E., Leijtens, T., Bush, K. A., Prasanna, R., Green, T., Wang, J. T.-W., McMeekin, D. P., Volonakis, G., Milot, R. L., May, R., et al. (2016) · Science · doi:10.1126/science.aaf9717 · Cited by 1,499
Liang, P., Liao, C., Chueh, C., Zuo, F., Williams, S. T., Xin, X., Lin, J., & Jen, A. K. ‐. (2014) · Advanced Materials · doi:10.1002/adma.201400231 · Cited by 1,452
Ponseca, C. S., Savenije, T. J., Abdellah, M., Zheng, K., Yartsev, A., Pascher, T., Harlang, T., Chabera, P., Pullerits, T., Stepanov, A., et al. (2014) · Journal of the American Chemical Society · doi:10.1021/ja412583t · Cited by 1,257
Planar‐Structure Perovskite Solar Cells with Efficiency beyond 21%
Jiang, Q., Chu, Z., Wang, P., Yang, X., Liu, H., Wang, Y., Yin, Z., Wu, J., Zhang, X., & You, J. (2017) · Advanced Materials · doi:10.1002/adma.201703852 · Cited by 1,250
Zheng, X., Hou, Y., Bao, C., Yin, J., Yuan, F., Huang, Z., Song, K., Liu, J., Troughton, J., Gasparini, N., et al. (2020) · Nature Energy · doi:10.1038/s41560-019-0538-4 · Cited by 1,236
Al-Ashouri, A., Magomedov, A., Roß, M., Jošt, M., Talaikis, M., Chistiakova, G., Bertram, T., Márquez, J. A., Köhnen, E., Kasparavičius, E., et al. (2019) · Energy & Environmental Science · doi:10.1039/c9ee02268f · Cited by 1,214
Heo, J. H., Han, H. J., Kim, D., Ahn, T. K., & Im, S. H. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00120j · Cited by 1,187
Li, X., Ibrahim Dar, M., Yi, C., Luo, J., Tschumi, M., Zakeeruddin, S. M., Nazeeruddin, M. K., Han, H., & Grätzel, M. (2015) · Nature Chemistry · doi:10.1038/nchem.2324 · Cited by 1,183
Self-citationUnder the spotlight: The organic–inorganic hybrid halide perovskite for optoelectronic applications
Chen, Q., De Marco, N., Yang, Y. (., Song, T.-B., Chen, C.-C., Zhao, H., Hong, Z., Zhou, H., & Yang, Y. (2015) · Nano Today · doi:10.1016/j.nantod.2015.04.009 · Cited by 1,154
Tanaka, K., Takahashi, T., Ban, T., Kondo, T., Uchida, K., & Miura, N. (2003) · Solid State Communications · doi:10.1016/s0038-1098(03)00566-0 · Cited by 975
Covalent Surface Modification of Oxide Surfaces
Pujari, S. P., Scheres, L., Marcelis, A. T. M., & Zuilhof, H. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201306709 · Cited by 934
SnO2: A Wonderful Electron Transport Layer for Perovskite Solar Cells
Jiang, Q., Zhang, X., & You, J. (2018) · Small · doi:10.1002/smll.201801154 · Cited by 924
Highly efficient and stable planar perovskite solar cells by solution-processed tin oxide
Anaraki, E. H., Kermanpur, A., Steier, L., Domanski, K., Matsui, T., Tress, W., Saliba, M., Abate, A., Grätzel, M., Hagfeldt, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02390h · Cited by 848
Kim, J. H., Liang, P., Williams, S. T., Cho, N., Chueh, C., Glaz, M. S., Ginger, D. S., & Jen, A. K. ‐. (2015) · Advanced Materials · doi:10.1002/adma.201404189 · Cited by 833
An extended Tolerance Factor approach for organic–inorganic perovskites
Kieslich, G., Sun, S., & Cheetham, A. K. (2015) · Chemical Science · doi:10.1039/c5sc00961h · Cited by 798
Materials Processing Routes to Trap-Free Halide Perovskites
Buin, A., Pietsch, P., Xu, J., Voznyy, O., Ip, A. H., Comin, R., & Sargent, E. H. (2014) · Nano Letters · doi:10.1021/nl502612m · Cited by 768
Polymer-modified halide perovskite films for efficient and stable planar heterojunction solar cells
Zuo, L., Guo, H., deQuilettes, D. W., Jariwala, S., De Marco, N., Dong, S., DeBlock, R., Ginger, D. S., Dunn, B., Wang, M., et al. (2017) · Science Advances · doi:10.1126/sciadv.1700106 · Cited by 749
Tuning of Metal Work Functions with Self‐Assembled Monolayers
de Boer, B., Hadipour, A., Mandoc, M. M., van Woudenbergh, T., & Blom, P. W. M. (2005) · Advanced Materials · doi:10.1002/adma.200401216 · Cited by 747
Photoinduced Giant Dielectric Constant in Lead Halide Perovskite Solar Cells
Juarez-Perez, E. J., Sanchez, R. S., Badia, L., Garcia-Belmonte, G., Kang, Y. S., Mora-Sero, I., & Bisquert, J. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5011169 · Cited by 744
Yang, S., Dai, J., Yu, Z., Shao, Y., Zhou, Y., Xiao, X., Zeng, X. C., & Huang, J. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.8b13091 · Cited by 744
Oga, H., Saeki, A., Ogomi, Y., Hayase, S., & Seki, S. (2014) · Journal of the American Chemical Society · doi:10.1021/ja506936f · Cited by 712
Heterojunction Modification for Highly Efficient Organic–Inorganic Perovskite Solar Cells
Wojciechowski, K., Stranks, S. D., Abate, A., Sadoughi, G., Sadhanala, A., Kopidakis, N., Rumbles, G., Li, C.-Z., Friend, R. H., Jen, A. K.-Y., et al. (2014) · ACS Nano · doi:10.1021/nn505723h · Cited by 677
Zuo, L., Gu, Z., Ye, T., Fu, W., Wu, G., Li, H., & Chen, H. (2015) · Journal of the American Chemical Society · doi:10.1021/ja512518r · Cited by 676
Wang, S., Jiang, Y., Juarez-Perez, E. J., Ono, L. K., & Qi, Y. (2016) · Nature Energy · doi:10.1038/nenergy.2016.195 · Cited by 661
Recent Advances in the Inverted Planar Structure of Perovskite Solar Cells
Meng, L., You, J., Guo, T.-F., & Yang, Y. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00404 · Cited by 659
Role of the Selective Contacts in the Performance of Lead Halide Perovskite Solar Cells
Juarez-Perez, E. J., Wuβler, M., Fabregat-Santiago, F., Lakus-Wollny, K., Mankel, E., Mayer, T., Jaegermann, W., & Mora-Sero, I. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500059v · Cited by 650
Flexible, low-temperature, solution processed ZnO-based perovskite solid state solar cells
Kumar, M. H., Yantara, N., Dharani, S., Graetzel, M., Mhaisalkar, S., Boix, P. P., & Mathews, N. (2013) · Chemical Communications · doi:10.1039/c3cc46534a · Cited by 650
Abrusci, A., Stranks, S. D., Docampo, P., Yip, H.-L., Jen, A. K.-Y., & Snaith, H. J. (2013) · Nano Letters · doi:10.1021/nl401044q · Cited by 640
Cheng, Z., & Lin, J. (2010) · CrystEngComm · doi:10.1039/c001929a · Cited by 633
Thin Insulating Tunneling Contacts for Efficient and Water‐Resistant Perovskite Solar Cells
Wang, Q., Dong, Q., Li, T., Gruverman, A., & Huang, J. (2016) · Advanced Materials · doi:10.1002/adma.201600969 · Cited by 633
Origin of the Thermal Instability in CH3NH3PbI3 Thin Films Deposited on ZnO
Yang, J., Siempelkamp, B. D., Mosconi, E., De Angelis, F., & Kelly, T. L. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b01598 · Cited by 629
Rehman, W., McMeekin, D. P., Patel, J. B., Milot, R. L., Johnston, M. B., Snaith, H. J., & Herz, L. M. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03014a · Cited by 612
Recent progress in electron transport layers for efficient perovskite solar cells
Yang, G., Tao, H., Qin, P., Ke, W., & Fang, G. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta09011c · Cited by 579
Organic photovoltaic cell with 17% efficiency and superior processability
Cui, Y., Yao, H., Hong, L., Zhang, T., Tang, Y., Lin, B., Xian, K., Gao, B., An, C., Bi, P., et al. (2020) · National Science Review · doi:10.1093/nsr/nwz200 · Cited by 568
Multifunctional Fullerene Derivative for Interface Engineering in Perovskite Solar Cells
Li, Y., Zhao, Y., Chen, Q., Yang, Y. (., Liu, Y., Hong, Z., Liu, Z., Hsieh, Y.-T., Meng, L., Li, Y., et al. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b10614 · Cited by 539
Electronic Structure of TiO2/CH3NH3PbI3 Perovskite Solar Cell Interfaces
Lindblad, R., Bi, D., Park, B.-W., Oscarsson, J., Gorgoi, M., Siegbahn, H., Odelius, M., Johansson, E. M. J., & Rensmo, H. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz402749f · Cited by 469
Fully Printable Mesoscopic Perovskite Solar Cells with Organic Silane Self-Assembled Monolayer
Liu, L., Mei, A., Liu, T., Jiang, P., Sheng, Y., Zhang, L., & Han, H. (2015) · Journal of the American Chemical Society · doi:10.1021/ja5125594 · Cited by 460
Thermally stable, planar hybrid perovskite solar cells with high efficiency
Choi, K., Lee, J., Kim, H. I., Park, C. W., Kim, G.-W., Choi, H., Park, S., Park, S. A., & Park, T. (2018) · Energy & Environmental Science · doi:10.1039/c8ee02242a · Cited by 458
Effects of molecular interface modification in hybrid organic-inorganic photovoltaic cells
Goh, C., Scully, S. R., & McGehee, M. D. (2007) · Journal of Applied Physics · doi:10.1063/1.2737977 · Cited by 452
Hotchkiss, P. J., Jones, S. C., Paniagua, S. A., Sharma, A., Kippelen, B. J., Armstrong, N. R., & Marder, S. R. (2011) · Accounts of Chemical Research · doi:10.1021/ar200119g · Cited by 450
Cao, J., Wu, B., Chen, R., Wu, Y., Hui, Y., Mao, B., & Zheng, N. (2018) · Advanced Materials · doi:10.1002/adma.201705596 · Cited by 447
Yang, G., Wang, C., Lei, H., Zheng, X., Qin, P., Xiong, L., Zhao, X., Yan, Y., & Fang, G. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta08783c · Cited by 437
Bai, Y., Dong, Q., Shao, Y., Deng, Y., Wang, Q., Shen, L., Wang, D., Wei, W., & Huang, J. (2016) · Nature Communications · doi:10.1038/ncomms12806 · Cited by 417
Improving the Long-Term Stability of Perovskite Solar Cells with a Porous Al2O3 Buffer Layer
Guarnera, S., Abate, A., Zhang, W., Foster, J. M., Richardson, G., Petrozza, A., & Snaith, H. J. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/jz502703p · Cited by 381
Tailoring the Interfacial Chemical Interaction for High-Efficiency Perovskite Solar Cells
Zuo, L., Chen, Q., De Marco, N., Hsieh, Y.-T., Chen, H., Sun, P., Chang, S.-Y., Zhao, H., Dong, S., & Yang, Y. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04015 · Cited by 373
A review of aspects of additive engineering in perovskite solar cells
Mahapatra, A., Prochowicz, D., Tavakoli, M. M., Trivedi, S., Kumar, P., & Yadav, P. (2020) · Journal of Materials Chemistry A · doi:10.1039/c9ta07657c · Cited by 369
Interfacial modification to improve inverted polymer solar cells
Hau, S. K., Yip, H.-L., Acton, O., Baek, N. S., Ma, H., & Jen, A. K.-Y. (2008) · Journal of Materials Chemistry · doi:10.1039/b808004f · Cited by 361
Kim, G.-W., Kang, G., Kim, J., Lee, G.-Y., Kim, H. I., Pyeon, L., Lee, J., & Park, T. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00709k · Cited by 354
Bai, Y., Chen, H., Xiao, S., Xue, Q., Zhang, T., Zhu, Z., Li, Q., Hu, C., Yang, Y., Hu, Z., et al. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201505215 · Cited by 351
Fullerene derivative anchored SnO2 for high-performance perovskite solar cells
Liu, K., Chen, S., Wu, J., Zhang, H., Qin, M., Lu, X., Tu, Y., Meng, Q., & Zhan, X. (2018) · Energy & Environmental Science · doi:10.1039/c8ee02172d · Cited by 261
Gradient Energy Alignment Engineering for Planar Perovskite Solar Cells with Efficiency Over 23%
Wang, P., Li, R., Chen, B., Hou, F., Zhang, J., Zhao, Y., & Zhang, X. (2020) · Advanced Materials · doi:10.1002/adma.201905766 · Cited by 257
Wang, Q., Chueh, C., Zhao, T., Cheng, J., Eslamian, M., Choy, W. C. H., & Jen, A. K. ‐. (2017) · ChemSusChem · doi:10.1002/cssc.201701262 · Cited by 253
Xue, Q., Bai, Y., Liu, M., Xia, R., Hu, Z., Chen, Z., Jiang, X., Huang, F., Yang, S., Matsuo, Y., et al. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602333 · Cited by 243
Pham, N. D., Tiong, V. T., Yao, D., Martens, W., Guerrero, A., Bisquert, J., & Wang, H. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.10.006 · Cited by 229
Understanding and Eliminating Hysteresis for Highly Efficient Planar Perovskite Solar Cells
Wang, C., Xiao, C., Yu, Y., Zhao, D., Awni, R. A., Grice, C. R., Ghimire, K., Constantinou, I., Liao, W., Cimaroli, A. J., et al. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700414 · Cited by 221
Liu, S., Liu, R., Chen, Y., Ho, S., Kim, J. H., & So, F. (2014) · Chemistry of Materials · doi:10.1021/cm501898y · Cited by 213
Thiols as interfacial modifiers to enhance the performance and stability of perovskite solar cells
Cao, J., Yin, J., Yuan, S., Zhao, Y., Li, J., & Zheng, N. (2015) · Nanoscale · doi:10.1039/c5nr01820j · Cited by 212
Xie, L., Chen, J., Vashishtha, P., Zhao, X., Shin, G. S., Mhaisalkar, S. G., & Park, N.-G. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b01356 · Cited by 211
Ogomi, Y., Morita, A., Tsukamoto, S., Saitho, T., Shen, Q., Toyoda, T., Yoshino, K., Pandey, S. S., Ma, T., & Hayase, S. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp412627n · Cited by 202
Yalcin, E., Can, M., Rodriguez-Seco, C., Aktas, E., Pudi, R., Cambarau, W., Demic, S., & Palomares, E. (2019) · Energy & Environmental Science · doi:10.1039/c8ee01831f · Cited by 194
Wang, S., Li, Z., Zhang, Y., Liu, X., Han, J., Li, X., Liu, Z., (Frank) Liu, S., & Choy, W. C. H. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900417 · Cited by 180
Shining Light on the Photoluminescence Properties of Metal Halide Perovskites
Goetz, K. P., Taylor, A. D., Paulus, F., & Vaynzof, Y. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910004 · Cited by 174
Gu, Z., Zuo, L., Larsen-Olsen, T. T., Ye, T., Wu, G., Krebs, F. C., & Chen, H. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta07008b · Cited by 171
Bauer, T., Schmaltz, T., Lenz, T., Halik, M., Meyer, B., & Clark, T. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am4008374 · Cited by 166
Liang, Z., Zhang, S., Xu, X., Wang, N., Wang, J., Wang, X., Bi, Z., Xu, G., Yuan, N., & Ding, J. (2015) · RSC Advances · doi:10.1039/c5ra09110a · Cited by 157
Bifunctional alkyl chain barriers for efficient perovskite solar cells
Zhang, J., Hu, Z., Huang, L., Yue, G., Liu, J., Lu, X., Hu, Z., Shang, M., Han, L., & Zhu, Y. (2015) · Chemical Communications · doi:10.1039/c5cc00128e · Cited by 155
Hou, M., Zhang, H., Wang, Z., Xia, Y., Chen, Y., & Huang, W. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b10332 · Cited by 130
Morphology Evolution of High Efficiency Perovskite Solar Cells via Vapor Induced Intermediate Phases
Zuo, L., Dong, S., Marco, N. D., Hsieh, Y., Bae, S., Sun, P., & Yang, Y. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b09656 · Cited by 125
Self‐Crystallized Multifunctional 2D Perovskite for Efficient and Stable Perovskite Solar Cells
Kim, H., Pei, M., Lee, Y., Sutanto, A. A., Paek, S., Queloz, V. I. E., Huckaba, A. J., Cho, K. T., Yun, H. J., Yang, H., et al. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910620 · Cited by 104
Self-citationInterfacial engineering by using self-assembled monolayer in mesoporous perovskite solar cell
Li, B., Chen, Y., Liang, Z., Gao, D., & Huang, W. (2015) · RSC Advances · doi:10.1039/c5ra17129f · Cited by 94
Wei, D., Ji, J., Song, D., Li, M., Cui, P., Li, Y., Mbengue, J. M., Zhou, W., Ning, Z., & Park, N. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta10418e · Cited by 81
Suppression of Hysteresis Effects in Organohalide Perovskite Solar Cells
Hou, Y., Scheiner, S., Tang, X., Gasparini, N., Richter, M., Li, N., Schweizer, P., Chen, S., Chen, H., Quiroz, C. O. R., et al. (2017) · Advanced Materials Interfaces · doi:10.1002/admi.201700007 · Cited by 78
Kim, H. B., Im, I., Yoon, Y., Sung, S. D., Kim, E., Kim, J., & Lee, W. I. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06479h · Cited by 76
Tian, C., Lin, K., Lu, J., Feng, W., Song, P., Xie, L., & Wei, Z. (2019) · Small Methods · doi:10.1002/smtd.201900476 · Cited by 76
Zhu, T., Su, J., Labat, F., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b18034 · Cited by 66
Role of Interfacial Layers in Organic Solar Cells: Energy Level Pinning versus Phase Segregation
Cao, B., He, X., Fetterly, C. R., Olsen, B. C., Luber, E. J., & Buriak, J. M. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b02712 · Cited by 61
Lee, J., Lee, T. H., Byranvand, M. M., Choi, K., Kim, H. I., Park, S. A., Kim, J. Y., & Park, T. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta00479j · Cited by 56
Han, F., Hao, G., Wan, Z., Luo, J., Xia, J., & Jia, C. (2018) · Electrochimica Acta · doi:10.1016/j.electacta.2018.10.130 · Cited by 53
Cisneros, R., Beley, M., & Lapicque, F. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp00077k · Cited by 33
Sohail, M., Bassindale, A. R., Taylor, P. G., Korlyukov, A. A., Arkhipov, D. E., Male, L., Coles, S. J., & Hursthouse, M. B. (2013) · Organometallics · doi:10.1021/om301137b · Cited by 29
Self-citationLi, Z., Liu, C., Zhang, X., Ren, G., Han, W., & Guo, W. (2018) · Small · doi:10.1002/smll.201804692 · Cited by 26
Cited by
Bimolecularly passivated interface enables efficient and stable inverted perovskite solar cells
Liu, C., Yang, Y., Chen, H., Xu, J., Liu, A., Bati, A. S. R., Zhu, H., Grater, L., Hadke, S. S., Huang, C., et al. (2023) · Science · doi:10.1126/science.adk1633 · Cited by 757
Li, M., Liu, M., Qi, F., Lin, F. R., & Jen, A. K.-Y. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00396 · Cited by 642
Molecular engineering of contact interfaces for high-performance perovskite solar cells
Isikgor, F. H., Zhumagali, S., T. Merino, L. V., De Bastiani, M., McCulloch, I., & De Wolf, S. (2022) · Nature Reviews Materials · doi:10.1038/s41578-022-00503-3 · Cited by 600
Li, L., Wang, Y., Wang, X., Lin, R., Luo, X., Liu, Z., Zhou, K., Xiong, S., Bao, Q., Chen, G., et al. (2022) · Nature Energy · doi:10.1038/s41560-022-01045-2 · Cited by 534
Organic Hole‐Transport Layers for Efficient, Stable, and Scalable Inverted Perovskite Solar Cells
Yao, Y., Cheng, C., Zhang, C., Hu, H., Wang, K., & De Wolf, S. (2022) · Advanced Materials · doi:10.1002/adma.202203794 · Cited by 363
Metadata
- Authors
- Ali, F., Roldán‐Carmona, C., Sohail, M., & Nazeeruddin, M. K.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2020-11-13
- Volume
- 10
- Issue
- 48
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W3098903136
- Cited by
- 296
- References
- 105
- FWCI
- 8.86
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.