The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Statistical monitoring of multivariable dynamic processes with state‐space models
Abstract
Industrial continuous processes may have a large number of process variables and are usually operated for extended periods at fixed operating points under closed‐loop control, yielding process measurements that are autocorrelated, cross‐correlated, and collinear. A statistical process monitoring (SPM) method based on multivariate statistics and system theory is introduced to monitor the variability of such processes. The statistical model that describes the in‐control variability is based on a canonical‐variate (CV) state‐space model that is an equivalent representation of a vector autoregressive moving‐average time‐series model. The CV state variables obtained from the state‐space model are linear combinations of the past process measurements that explain the variability of the future measurements the most. Because of this distinctive feature, the CV state variables are regarded as the principal dynamic directions A T 2 statistic based on the CV state variables is used for developing an SPM procedure. Simple examples based on simulated data and an experimental application based on a high‐temperature short‐time milk pasteurization process illustrate advantages of the proposed SPM method.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A new look at the statistical model identification
Akaike, H. (1974) · IEEE Transactions on Automatic Control · doi:10.1109/tac.1974.1100705 · Cited by 51,879
Analysis of a complex of statistical variables into principal components.
Hotelling, H. (1933) · Journal of Educational Psychology · doi:10.1037/h0071325 · Cited by 9,633
Introduction to Statistical Quality Control
Sauter, R. M., & Montgomery, D. C. (1992) · Technometrics · doi:10.2307/1269251 · Cited by 7,842
Time Series Analysis: Forecasting and Control
Kleiner, B. (1977) · Technometrics · doi:10.1080/00401706.1977.10489562 · Cited by 6,446
Ljung, L. (1999) · Wiley Encyclopedia of Electrical and Electronics Engineering · doi:10.1002/047134608x.w1046 · Cited by 3,778
Introduction to Stochastic Control Theory
(1970) · Mathematics in Science and Engineering · doi:10.1016/s0076-5392(09)x6015-7 · Cited by 3,220
Wold, S., Ruhe, A., Wold, H., & Dunn, III (1984) · SIAM Journal on Scientific and Statistical Computing · doi:10.1137/0905052 · Cited by 2,529
Computer-controlled systems: Theory and design
Johnson, C. R. (1985) · Automatica · doi:10.1016/0005-1098(85)90050-0 · Cited by 2,364
Extracting qualitative dynamics from experimental data
Broomhead, D. S., & King, G. P. (1986) · Physica D: Nonlinear Phenomena · doi:10.1016/0167-2789(86)90031-x · Cited by 2,278
Applied Multivariate Statistical Analysis
Härdle, W., & Simar, L. (2003) · Springer eBooks · doi:10.1007/978-3-662-05802-2 · Cited by 2,263
N4SID: Subspace algorithms for the identification of combined deterministic-stochastic systems
Van Overschee, P., & De Moor, B. (1994) · Automatica · doi:10.1016/0005-1098(94)90230-5 · Cited by 1,979
Höskuldsson, A. (1988) · Journal of Chemometrics · doi:10.1002/cem.1180020306 · Cited by 1,881
Tukey, J. W. (1962) · The Annals of Mathematical Statistics · doi:10.1214/aoms/1177704711 · Cited by 1,860
Encyclopedia of Statistical Sciences 2.
Dawid, A. P., Kotz, S., Johnson, N. L., & Read, C. B. (1984) · Biometrics · doi:10.2307/2530789 · Cited by 1,494
Monitoring batch processes using multiway principal component analysis
Nomikos, P., & MacGregor, J. F. (1994) · AIChE Journal · doi:10.1002/aic.690400809 · Cited by 1,483
Disturbance detection and isolation by dynamic principal component analysis
Ku, W., Storer, R. H., & Georgakis, C. (1995) · Chemometrics and Intelligent Laboratory Systems · doi:10.1016/0169-7439(95)00076-3 · Cited by 1,483
Multivariate SPC Charts for Monitoring Batch Processes
Nomikos, P., & MacGregor, J. F. (1995) · Technometrics · doi:10.1080/00401706.1995.10485888 · Cited by 1,422
Control Procedures for Residuals Associated With Principal Component Analysis
Jackson, J. E., & Mudholkar, G. S. (1979) · Technometrics · doi:10.1080/00401706.1979.10489779 · Cited by 1,237
Introduction to Multiple Time Series Analysis
Lütkepohl, H. (1991) · Springer eBooks · doi:10.1007/978-3-662-02691-5 · Cited by 1,090
Multivariate statistical monitoring of process operating performance
Kresta, J. V., Macgregor, J. F., & Marlin, T. E. (1991) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.5450690105 · Cited by 989
The Probability Plot Correlation Coefficient Test for Normality
Filliben, J. J. (1975) · Technometrics · doi:10.1080/00401706.1975.10489279 · Cited by 919
Process analysis, monitoring and diagnosis, using multivariate projection methods
Kourti, T. (1995) · Chemometrics and Intelligent Laboratory Systems · doi:10.1016/0169-7439(94)00079-x · Cited by 780
Process monitoring and diagnosis by multiblock PLS methods
MacGregor, J. F., Jaeckle, C., Kiparissides, C., & Koutoudi, M. (1994) · AIChE Journal · doi:10.1002/aic.690400509 · Cited by 773
Multi-way partial least squares in monitoring batch processes
Nomikos, P., & MacGregor, J. F. (1995) · Chemometrics and Intelligent Laboratory Systems · doi:10.1016/0169-7439(95)00043-7 · Cited by 737
VERHAEGEN, M., & DEWILDE, P. (1992) · International Journal of Control · doi:10.1080/00207179208934363 · Cited by 716
Multivariate Data Analysis in Chemistry
Wold, S., Albano, C., Dunn, W. J., Edlund, U., Esbensen, K., Geladi, P., Hellberg, S., Johansson, E., Lindberg, W., & Sjöström, M. (1984) · Chemometrics · doi:10.1007/978-94-017-1026-8_2 · Cited by 617
Multivariate Control Charts for Individual Observations
Tracy, N. D., Young, J. C., & Mason, R. L. (1992) · Journal of Quality Technology · doi:10.1080/00224065.1992.12015232 · Cited by 597
Stochastic theory of minimal realization
Akaike, H. (1974) · IEEE Transactions on Automatic Control · doi:10.1109/tac.1974.1100707 · Cited by 429
A canonical analysis of multiple time series
BOX, G. E. P., & TIAO, G. C. (1977) · Biometrika · doi:10.1093/biomet/64.2.355 · Cited by 415
Statistical process control procedures for correlated observations
Harris, T. J., & Ross, W. H. (1991) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.5450690106 · Cited by 382
Frequency Domain Properties of Scalar and Multivariable Feedback Systems
(1988) · Lecture Notes in Control and Information Sciences · doi:10.1007/bfb0044565 · Cited by 362
State Space Modeling of Time Series
Aoki, M. (1990) · Universitext · doi:10.1007/978-3-642-75883-6 · Cited by 171
Dynamic PLS modelling for process control
Kaspar, M. H., & Harmon Ray, W. (1993) · Chemical Engineering Science · doi:10.1016/0009-2509(93)85001-6 · Cited by 165
Some Properties of the Range in Samples from Tukey's Symmetric Lambda Distributions
Joiner, B. L., & Rosenblatt, J. R. (1971) · Journal of the American Statistical Association · doi:10.1080/01621459.1971.10482275 · Cited by 149
Identification of chemical processes using canonical variate analysis
Schaper, C. D., Larimore, W. E., Seborg, D. E., & Mellichamp, D. A. (1994) · Computers & Chemical Engineering · doi:10.1016/0098-1354(94)85023-2 · Cited by 51
A subspace fitting method for identification of linear state-space models
Swindlehust, A., Roy, R. H., Ottersten, B., & Kailath, T. (1995) · IEEE Transactions on Automatic Control · doi:10.1109/9.341800 · Cited by 26
Cited by
Statistical process monitoring: basics and beyond
Joe Qin, S. (2003) · Journal of Chemometrics · doi:10.1002/cem.800 · Cited by 1,582
Survey on data-driven industrial process monitoring and diagnosis
Qin, S. J. (2012) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2012.09.004 · Cited by 1,470
Russell, E. L., Chiang, L. H., & Braatz, R. D. (2000) · Chemometrics and Intelligent Laboratory Systems · doi:10.1016/s0169-7439(00)00058-7 · Cited by 525
Multimode process monitoring with Bayesian inference‐based finite Gaussian mixture models
Yu, J., & Qin, S. J. (2008) · AIChE Journal · doi:10.1002/aic.11515 · Cited by 494
Shang, C., Yang, F., Gao, X., Huang, X., Suykens, J. A. K., & Huang, D. (2015) · AIChE Journal · doi:10.1002/aic.14888 · Cited by 300
Metadata
- Authors
- Negiz, A., & Çlinar, A.
- Venue
- AIChE Journal
- Publisher
- Wiley
- Published
- 1997-08
- Volume
- 43
- Issue
- 8
- Pages
- 2002-2020
- ISSN
- 0001-1541 (ISSN-L)
- 1547-5905
- OpenAlex
- W1988581389
- Cited by
- 259
- References
- 36
- FWCI
- 15.65
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.