The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Sulfur Cathodes Based on Conductive MXene Nanosheets for High‐Performance Lithium–Sulfur Batteries
Abstract
Lithium–sulfur batteries are amongst the most promising candidates to satisfy emerging energy‐storage demands. Suppression of the polysulfide shuttle while maintaining high sulfur content is the main challenge that faces their practical development. Here, we report that 2D early‐transition‐metal carbide conductive MXene phases—reported to be impressive supercapacitor materials—also perform as excellent sulfur battery hosts owing to their inherently high underlying metallic conductivity and self‐functionalized surfaces. We show that 70 wt % S/Ti 2 C composites exhibit stable long‐term cycling performance because of strong interaction of the polysulfide species with the surface Ti atoms, demonstrated by X‐ray photoelectron spectroscopy studies. The cathodes show excellent cycling performance with specific capacity close to 1200 mA h g−1 at a five‐hour charge/discharge (C/5) current rate. Capacity retention of 80 % is achieved over 400 cycles at a two‐hour charge/discharge (C/2) current rate.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Two‐Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2
Naguib, M., Kurtoglu, M., Presser, V., Lu, J., Niu, J., Heon, M., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2011) · Advanced Materials · doi:10.1002/adma.201102306 · Cited by 11,855
25th Anniversary Article: MXenes: A New Family of Two‐Dimensional Materials
Naguib, M., Mochalin, V. N., Barsoum, M. W., & Gogotsi, Y. (2014) · Advanced Materials · doi:10.1002/adma.201304138 · Cited by 6,414
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Self-citationWhere do batteries end and supercapacitors begin?
Simon, P., Gogotsi, Y., & Dunn, B. (2014) · Science · doi:10.1126/science.1249625 · Cited by 5,634
Two-Dimensional Transition Metal Carbides
Naguib, M., Mashtalir, O., Carle, J., Presser, V., Lu, J., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2012) · ACS Nano · doi:10.1021/nn204153h · Cited by 4,769
Cation Intercalation and High Volumetric Capacitance of Two-Dimensional Titanium Carbide
Lukatskaya, M. R., Mashtalir, O., Ren, C. E., Dall’Agnese, Y., Rozier, P., Taberna, P. L., Naguib, M., Simon, P., Barsoum, M. W., & Gogotsi, Y. (2013) · Science · doi:10.1126/science.1241488 · Cited by 4,320
Intercalation and delamination of layered carbides and carbonitrides
Mashtalir, O., Naguib, M., Mochalin, V. N., Dall’Agnese, Y., Heon, M., Barsoum, M. W., & Gogotsi, Y. (2013) · Nature Communications · doi:10.1038/ncomms2664 · Cited by 2,852
Polysulfide Shuttle Study in the Li/S Battery System
Mikhaylik, Y. V., & Akridge, J. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1806394 · Cited by 2,115
Wei Seh, Z., Li, W., Cha, J. J., Zheng, G., Yang, Y., McDowell, M. T., Hsu, P.-C., & Cui, Y. (2013) · Nature Communications · doi:10.1038/ncomms2327 · Cited by 2,107
Cited by
MXene chemistry, electrochemistry and energy storage applications
Li, X., Huang, Z., Shuck, C. E., Liang, G., Gogotsi, Y., & Zhi, C. (2022) · Nature Reviews Chemistry · doi:10.1038/s41570-022-00384-8 · Cited by 1,495
2D MXenes: A New Family of Promising Catalysts for the Hydrogen Evolution Reaction
Gao, G., O’Mullane, A. P., & Du, A. (2017) · ACS Catalysis · doi:10.1021/acscatal.6b02754 · Cited by 1,153
A Two‐Dimensional Lamellar Membrane: MXene Nanosheet Stacks
Ding, L., Wei, Y., Wang, Y., Chen, H., Caro, J., & Wang, H. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201609306 · Cited by 1,111
High-entropy ceramics: Review of principles, production and applications
Akrami, S., Edalati, P., Fuji, M., & Edalati, K. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100644 · Cited by 1,008
Zhao, S., Zhang, H.-B., Luo, J.-Q., Wang, Q.-W., Xu, B., Hong, S., & Yu, Z.-Z. (2018) · ACS Nano · doi:10.1021/acsnano.8b05739 · Cited by 893
Enhanced Electrochemical Kinetics on Conductive Polar Mediators for Lithium–Sulfur Batteries
Peng, H., Zhang, G., Chen, X., Zhang, Z., Xu, W., Huang, J., & Zhang, Q. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201605676 · Cited by 649
A Two‐Dimensional Zirconium Carbide by Selective Etching of Al3C3 from Nanolaminated Zr3Al3C5
Zhou, J., Zha, X., Chen, F. Y., Ye, Q., Eklund, P., Du, S., & Huang, Q. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201510432 · Cited by 631
Porous Two‐Dimensional Transition Metal Carbide (MXene) Flakes for High‐Performance Li‐Ion Storage
Ren, C. E., Zhao, M., Makaryan, T., Halim, J., Boota, M., Kota, S., Anasori, B., Barsoum, M. W., & Gogotsi, Y. (2016) · ChemElectroChem · doi:10.1002/celc.201600059 · Cited by 625
Lim, W., Kim, S., Jo, C., & Lee, J. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201902413 · Cited by 535
Two-Dimensional Vanadium Carbide (MXene) as Positive Electrode for Sodium-Ion Capacitors
Dall’Agnese, Y., Taberna, P.-L., Gogotsi, Y., & Simon, P. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b00868 · Cited by 463
Selective Etching of Silicon from Ti3SiC2 (MAX) To Obtain 2D Titanium Carbide (MXene)
Alhabeb, M., Maleski, K., Mathis, T. S., Sarycheva, A., Hatter, C. B., Uzun, S., Levitt, A., & Gogotsi, Y. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201802232 · Cited by 452
A Comprehensive Understanding of Lithium–Sulfur Battery Technology
Li, T., Bai, X., Gulzar, U., Bai, Y., Capiglia, C., Deng, W., Zhou, X., Liu, Z., Feng, Z., & Proietti Zaccaria, R. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201901730 · Cited by 422
Malaki, M., Maleki, A., & Varma, R. S. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta01850f · Cited by 416
Surface functionalization of MXenes
Mozafari, M., & Soroush, M. (2021) · Materials Advances · doi:10.1039/d1ma00625h · Cited by 395
Porous MXenes: Synthesis, structures, and applications
Bu, F., Zagho, M. M., Ibrahim, Y., Ma, B., Elzatahry, A., & Zhao, D. (2020) · Nano Today · doi:10.1016/j.nantod.2019.100803 · Cited by 363
MXene Aerogel Scaffolds for High‐Rate Lithium Metal Anodes
Zhang, X., Lv, R., Wang, A., Guo, W., Liu, X., & Luo, J. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201808714 · Cited by 354
Zhang, H., Wang, Z., Zhang, Q., Wang, F., & Liu, Y. (2019) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2018.10.016 · Cited by 331
A high-entropy metal oxide as chemical anchor of polysulfide for lithium-sulfur batteries
Zheng, Y., Yi, Y., Fan, M., Liu, H., Li, X., Zhang, R., Li, M., & Qiao, Z.-A. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2019.02.030 · Cited by 315
Wang, Z., Shen, J., Liu, J., Xu, X., Liu, Z., Hu, R., Yang, L., Feng, Y., Liu, J., Shi, Z., et al. (2019) · Advanced Materials · doi:10.1002/adma.201902228 · Cited by 309
Metadata
- Authors
- Liang, X., Garsuch, A., & Nazar, L. F.
- Venue
- Angewandte Chemie
- Publisher
- Wiley
- Published
- 2015-02-03
- Volume
- 127
- Issue
- 13
- Pages
- 3979-3983
- ISSN
- 0044-8249 (ISSN-L)
- 1521-3757
- OpenAlex
- W4250524647
- Cited by
- 313
- References
- 30
- FWCI
- 7.06
- Type
- journal article
- Language
- de
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.