The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Transient Behavior of the Metal Interface in Lithium Metal–Garnet Batteries
Open accessAbstract
The interface between solid electrolytes and Li metal is a primary issue for solid‐state batteries. Introducing a metal interlayer to conformally coat solid electrolytes can improve the interface wettability of Li metal and reduce the interfacial resistance, but the mechanism of the metal interlayer is unknown. In this work, we used magnesium (Mg) as a model to investigate the effect of a metal coating on the interfacial resistance of a solid electrolyte and Li metal anode. The Li–Mg alloy has low overpotential, leading to a lower interfacial resistance. Our motivation is to understand how the metal interlayer behaves at the interface to promote increased Li‐metal wettability of the solid electrolyte surface and reduce interfacial resistance. Surprisingly, we found that the metal coating dissolved in the molten piece of Li and diffused into the bulk Li metal, leading to a small and stable interfacial resistance between the garnet solid electrolyte and the Li metal. We also found that the interfacial resistance did not change with increase in the thickness of the metal coating (5, 10, and 100 nm), due to the transient behavior of the metal interface layer.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Lithium Batteries: Status, Prospects and Future
Scrosati, B., & Garche, J. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.11.048 · Cited by 5,153
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
Lithium battery chemistries enabled by solid-state electrolytes
Manthiram, A., Yu, X., & Wang, S. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.103 · Cited by 4,689
Fast Lithium Ion Conduction in Garnet‐Type Li7La3Zr2O12
Murugan, R., Thangadurai, V., & Weppner, W. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200701144 · Cited by 3,250
Negating interfacial impedance in garnet-based solid-state Li metal batteries
Han, X., Gong, Y., Fu, K., He, X., Hitz, G. T., Dai, J., Pearse, A., Liu, B., Wang, H., Rubloff, G., et al. (2017) · Nature Materials · doi:10.1038/nmat4821 · Cited by 2,025
Self-citationZhu, Y., He, X., & Mo, Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b07517 · Cited by 1,936
Lin, D., Liu, Y., Liang, Z., Lee, H.-W., Sun, J., Wang, H., Yan, K., Xie, J., & Cui, Y. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2016.32 · Cited by 1,798
Yang, C.-P., Yin, Y.-X., Zhang, S.-F., Li, N.-W., & Guo, Y.-G. (2015) · Nature Communications · doi:10.1038/ncomms9058 · Cited by 1,589
Garnet-type solid-state fast Li ion conductors for Li batteries: critical review
Thangadurai, V., Narayanan, S., & Pinzaru, D. (2014) · Chemical Society Reviews · doi:10.1039/c4cs00020j · Cited by 1,534
Design principles for solid-state lithium superionic conductors
Wang, Y., Richards, W. D., Ong, S. P., Miara, L. J., Kim, J. C., Mo, Y., & Ceder, G. (2015) · Nature Materials · doi:10.1038/nmat4369 · Cited by 1,485
Zhu, Y., He, X., & Mo, Y. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta08574h · Cited by 1,045
Metallic anodes for next generation secondary batteries
Kim, H., Jeong, G., Kim, Y.-U., Kim, J.-H., Park, C.-M., & Sohn, H.-J. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60177c · Cited by 1,010
Plating a Dendrite-Free Lithium Anode with a Polymer/Ceramic/Polymer Sandwich Electrolyte
Zhou, W., Wang, S., Li, Y., Xin, S., Manthiram, A., & Goodenough, J. B. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b05341 · Cited by 1,006
Fu, K. (., Gong, Y., Dai, J., Gong, A., Han, X., Yao, Y., Wang, C., Wang, Y., Chen, Y., Yan, C., et al. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1600422113 · Cited by 930
Self-citationLithium-coated polymeric matrix as a minimum volume-change and dendrite-free lithium metal anode
Liu, Y., Lin, D., Liang, Z., Zhao, J., Yan, K., & Cui, Y. (2016) · Nature Communications · doi:10.1038/ncomms10992 · Cited by 902
Liang, Z., Lin, D., Zhao, J., Lu, Z., Liu, Y., Liu, C., Lu, Y., Wang, H., Yan, K., Tao, X., et al. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1518188113 · Cited by 846
Fu, K. (., Gong, Y., Liu, B., Zhu, Y., Xu, S., Yao, Y., Luo, W., Wang, C., Lacey, S. D., Dai, J., et al. (2017) · Science Advances · doi:10.1126/sciadv.1601659 · Cited by 842
Self-citationA review of lithium and non-lithium based solid state batteries
Kim, J. G., Son, B., Mukherjee, S., Schuppert, N., Bates, A., Kwon, O., Choi, M. J., Chung, H. Y., & Park, S. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.02.054 · Cited by 783
Wang, C., Gong, Y., Liu, B., Fu, K., Yao, Y., Hitz, E., Li, Y., Dai, J., Xu, S., Luo, W., et al. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04695 · Cited by 682
Self-citationTransition from Superlithiophobicity to Superlithiophilicity of Garnet Solid-State Electrolyte
Luo, W., Gong, Y., Zhu, Y., Fu, K. K., Dai, J., Lacey, S. D., Wang, C., Liu, B., Han, X., Mo, Y., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b06777 · Cited by 671
Self-citationCheng, L., Crumlin, E. J., Chen, W., Qiao, R., Hou, H., Franz Lux, S., Zorba, V., Russo, R., Kostecki, R., Liu, Z., et al. (2014) · Phys. Chem. Chem. Phys. · doi:10.1039/c4cp02921f · Cited by 545
Busche, M. R., Drossel, T., Leichtweiss, T., Weber, D. A., Falk, M., Schneider, M., Reich, M.-L., Sommer, H., Adelhelm, P., & Janek, J. (2016) · Nature Chemistry · doi:10.1038/nchem.2470 · Cited by 452
Improving battery safety by early detection of internal shorting with a bifunctional separator
Wu, H., Zhuo, D., Kong, D., & Cui, Y. (2014) · Nature Communications · doi:10.1038/ncomms6193 · Cited by 400
Solid-State Lithium Metal Batteries Promoted by Nanotechnology: Progress and Prospects
Xin, S., You, Y., Wang, S., Gao, H.-C., Yin, Y.-X., & Guo, Y.-G. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00175 · Cited by 366
A Thermally Conductive Separator for Stable Li Metal Anodes
Luo, W., Zhou, L., Fu, K., Yang, Z., Wan, J., Manno, M., Yao, Y., Zhu, H., Yang, B., & Hu, L. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b02432 · Cited by 356
Self-citationGarnet Solid Electrolyte Protected Li-Metal Batteries
Liu, B., Gong, Y., Fu, K., Han, X., Yao, Y., Pastel, G., Yang, C., Xie, H., Wachsman, E. D., & Hu, L. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b03887 · Cited by 287
Self-citationA high performance lithium-ion sulfur battery based on a Li2S cathode using a dual-phase electrolyte
Wang, L., Wang, Y., & Xia, Y. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00058k · Cited by 247
Garnet-Type Fast Li-Ion Conductors with High Ionic Conductivities for All-Solid-State Batteries
Wu, J.-F., Pang, W. K., Peterson, V. K., Wei, L., & Guo, X. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b00614 · Cited by 241
Liu, T., Ren, Y., Shen, Y., Zhao, S.-X., Lin, Y., & Nan, C.-W. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.05.111 · Cited by 179
Atomic Layer Deposition of the Solid Electrolyte Garnet Li7La3Zr2O12
Kazyak, E., Chen, K.-H., Wood, K. N., Davis, A. L., Thompson, T., Bielinski, A. R., Sanchez, A. J., Wang, X., Wang, C., Sakamoto, J., et al. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00944 · Cited by 177
Hybrid Lithium–Sulfur Batteries with a Solid Electrolyte Membrane and Lithium Polysulfide Catholyte
Yu, X., Bi, Z., Zhao, F., & Manthiram, A. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b04209 · Cited by 126
Liu, T., Zhang, Y., Chen, R., Zhao, S., Lin, Y., Nan, C., & Shen, Y. (2017) · Electrochemistry Communications · doi:10.1016/j.elecom.2017.03.016 · Cited by 76
Cited by
Interfaces and Interphases in All-Solid-State Batteries with Inorganic Solid Electrolytes
Banerjee, A., Wang, X., Fang, C., Wu, E. A., & Meng, Y. S. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00101 · Cited by 1,526
Physicochemical Concepts of the Lithium Metal Anode in Solid-State Batteries
Krauskopf, T., Richter, F. H., Zeier, W. G., & Janek, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00431 · Cited by 892
Recent Advances in Energy Chemistry between Solid-State Electrolyte and Safe Lithium-Metal Anodes
Cheng, X.-B., Zhao, C.-Z., Yao, Y.-X., Liu, H., & Zhang, Q. (2019) · Chem · doi:10.1016/j.chempr.2018.12.002 · Cited by 874
Self-citationZhang, X., Chen, X., Cheng, X., Li, B., Shen, X., Yan, C., Huang, J., & Zhang, Q. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201801513 · Cited by 838
Towards better Li metal anodes: Challenges and strategies
Zhang, Y., Zuo, T.-T., Popovic, J., Lim, K., Yin, Y.-X., Maier, J., & Guo, Y.-G. (2020) · Materials Today · doi:10.1016/j.mattod.2019.09.018 · Cited by 653
Metadata
- Authors
- Fu, K. (., Gong, Y., Fu, Z., Xie, H., Yao, Y., Liu, B., Carter, M., Wachsman, E., & Hu, L.
- Venue
- Angewandte Chemie International Edition
- Publisher
- Wiley
- Published
- 2017-10-19
- Volume
- 56
- Issue
- 47
- Pages
- 14942-14947
- ISSN
- 1433-7851 (ISSN-L)
- 1521-3773
- OpenAlex
- W2760882008
- Cited by
- 290
- References
- 33
- FWCI
- 12.42
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.