The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
Metal–Organic Frameworks for High Charge–Discharge Rates in Lithium–Sulfur Batteries
Abstract
We report a new method to promote the conductivities of metal–organic frameworks (MOFs) by 5 to 7 magnitudes, thus their potential in electrochemical applications can be fully revealed. This method combines the polarity and porosity advantages of MOFs with the conductive feature of conductive polymers, in this case, polypyrrole (ppy), to construct ppy‐MOF compartments for the confinement of sulfur in Li–S batteries. The performances of these ppy‐S‐in‐MOF electrodes exceed those of their MOF and ppy counterparts, especially at high charge–discharge rates. For the first time, the critical role of ion diffusion to the high rate performance was elucidated by comparing ppy‐MOF compartments with different pore geometries. The ppy‐S‐in‐PCN‐224 electrode with cross‐linked pores and tunnels stood out, with a high capacity of 670 and 440 mAh g−1 at 10.0 C after 200 and 1000 cycles, respectively, representing a new benchmark for long‐cycle performance at high rate in Li–S batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Selective gas adsorption and separation in metal–organic frameworks
Li, J.-R., Kuppler, R. J., & Zhou, H.-C. (2009) · Chemical Society Reviews · doi:10.1039/b802426j · Cited by 8,932
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
A Chromium Terephthalate-Based Solid with Unusually Large Pore Volumes and Surface Area
Férey, G., Mellot-Draznieks, C., Serre, C., Millange, F., Dutour, J., Surblé, S., & Margiolaki, I. (2005) · Science · doi:10.1126/science.1116275 · Cited by 5,430
Hydrogen Storage in Microporous Metal-Organic Frameworks
Rosi, N. L., Eckert, J., Eddaoudi, M., Vodak, D. T., Kim, J., O'Keeffe, M., & Yaghi, O. M. (2003) · Science · doi:10.1126/science.1083440 · Cited by 4,846
Conductive MOF electrodes for stable supercapacitors with high areal capacitance
Sheberla, D., Bachman, J. C., Elias, J. S., Sun, C.-J., Shao-Horn, Y., & Dincă, M. (2017) · Nature Materials · doi:10.1038/nmat4766 · Cited by 2,370
Nanostructured sulfur cathodes
Yang, Y., Zheng, G., & Cui, Y. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35256g · Cited by 1,947
Hydrocarbon Separations in a Metal-Organic Framework with Open Iron(II) Coordination Sites
Bloch, E. D., Queen, W. L., Krishna, R., Zadrozny, J. M., Brown, C. M., & Long, J. R. (2012) · Science · doi:10.1126/science.1217544 · Cited by 1,928
Xia, W., Mahmood, A., Zou, R., & Xu, Q. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00762c · Cited by 1,717
Smaller Sulfur Molecules Promise Better Lithium–Sulfur Batteries
Xin, S., Gu, L., Zhao, N.-H., Yin, Y.-X., Zhou, L.-J., Guo, Y.-G., & Wan, L.-J. (2012) · Journal of the American Chemical Society · doi:10.1021/ja308170k · Cited by 1,644
Lithium–sulphur batteries with a microporous carbon paper as a bifunctional interlayer
Su, Y.-S., & Manthiram, A. (2012) · Nature Communications · doi:10.1038/ncomms2163 · Cited by 1,458
Cited by
Electrically Conductive Metal–Organic Frameworks
Xie, L. S., Skorupskii, G., & Dincă, M. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00766 · Cited by 1,999
Baumann, A. E., Burns, D. A., Liu, B., & Thoi, V. S. (2019) · Communications Chemistry · doi:10.1038/s42004-019-0184-6 · Cited by 1,088
Synthesis of micro/nanoscaled metal–organic frameworks and their direct electrochemical applications
Xiao, X., Zou, L., Pang, H., & Xu, Q. (2020) · Chemical Society Reviews · doi:10.1039/c7cs00614d · Cited by 882
Metal–organic frameworks as a platform for clean energy applications
Li, X., Yang, X., Xue, H., Pang, H., & Xu, Q. (2020) · EnergyChem · doi:10.1016/j.enchem.2020.100027 · Cited by 706
Metal-Organic Frameworks for Batteries
Zhao, R., Liang, Z., Zou, R., & Xu, Q. (2018) · Joule · doi:10.1016/j.joule.2018.09.019 · Cited by 670
Advances in metal–organic framework coatings: versatile synthesis and broad applications
Meng, J., Liu, X., Niu, C., Pang, Q., Li, J., Liu, F., Liu, Z., & Mai, L. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00806c · Cited by 516
Self-citationHost Materials Anchoring Polysulfides in Li–S Batteries Reviewed
Zhou, L., Danilov, D. L., Eichel, R., & Notten, P. H. L. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202001304 · Cited by 516
Li, W., Guo, X., Geng, P., Du, M., Jing, Q., Chen, X., Zhang, G., Li, H., Xu, Q., Braunstein, P., et al. (2021) · Advanced Materials · doi:10.1002/adma.202105163 · Cited by 486
Metal–Organic Frameworks (MOFs) and MOF-Derived Materials for Energy Storage and Conversion
Zhang, X., Chen, A., Zhong, M., Zhang, Z., Zhang, X., Zhou, Z., & Bu, X.-H. (2019) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0024-x · Cited by 481
Du, M., Geng, P., Pei, C., Jiang, X., Shan, Y., Hu, W., Ni, L., & Pang, H. (2022) · Angewandte Chemie International Edition · doi:10.1002/anie.202209350 · Cited by 428
Metal-organic framework (MOF) composites as promising materials for energy storage applications
Peng, Y., Xu, J., Xu, J., Ma, J., Bai, Y., Cao, S., Zhang, S., & Pang, H. (2022) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2022.102732 · Cited by 415
Strategies towards Low‐Cost Dual‐Ion Batteries with High Performance
Zhou, X., Liu, Q., Jiang, C., Ji, B., Ji, X., Tang, Y., & Cheng, H. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201814294 · Cited by 366
Metal–organic frameworks for lithium–sulfur batteries
Zheng, Y., Zheng, S., Xue, H., & Pang, H. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta11075a · Cited by 351
Rational Design of MOF-Based Materials for Next-Generation Rechargeable Batteries
Ye, Z., Jiang, Y., Li, L., Wu, F., & Chen, R. (2021) · Nano-Micro Letters · doi:10.1007/s40820-021-00726-z · Cited by 323
Hong, X.-J., Song, C.-L., Yang, Y., Tan, H.-C., Li, G.-H., Cai, Y.-P., & Wang, H. (2019) · ACS Nano · doi:10.1021/acsnano.8b08155 · Cited by 301
Shrivastav, V., Sundriyal, S., Goel, P., Kaur, H., Tuteja, S. K., Vikrant, K., Kim, K.-H., Tiwari, U. K., & Deep, A. (2019) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2019.05.006 · Cited by 284
12 years roadmap of the sulfur cathode for lithium sulfur batteries (2009–2020)
Liu, T., Hu, H., Ding, X., Yuan, H., Jin, C., Nai, J., Liu, Y., Wang, Y., Wan, Y., & Tao, X. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.05.023 · Cited by 278
Sun, Z., Wang, Y., Zhang, L., Wu, H., Jin, Y., Li, Y., Shi, Y., Zhu, T., Mao, H., Liu, J., et al. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910482 · Cited by 276
Han, Z., Yang, Y., Rushlow, J., Huo, J., Liu, Z., Hsu, Y.-C., Yin, R., Wang, M., Liang, R., Wang, K.-Y., et al. (2025) · Chemical Society Reviews · doi:10.1039/d4cs00432a · Cited by 272
Defect Engineering for Expediting Li–S Chemistry: Strategies, Mechanisms, and Perspectives
Shi, Z., Li, M., Sun, J., & Chen, Z. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202100332 · Cited by 269
Zheng, Z.-J., Ye, H., & Guo, Z.-P. (2021) · Energy & Environmental Science · doi:10.1039/d0ee03181j · Cited by 263
Chen, Y., Zhang, W., Zhou, D., Tian, H., Su, D., Wang, C., Stockdale, D., Kang, F., Li, B., & Wang, G. (2019) · ACS Nano · doi:10.1021/acsnano.9b01079 · Cited by 257
Yu, J., Xiao, J., Li, A., Yang, Z., Zeng, L., Zhang, Q., Zhu, Y., & Guo, L. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.202004914 · Cited by 255
Metadata
- Authors
- Jiang, H., Liu, X., Wu, Y., Shu, Y., Gong, X., Ke, F., & Deng, H.
- Venue
- Angewandte Chemie International Edition
- Publisher
- Wiley
- Published
- 2018-02-27
- Volume
- 57
- Issue
- 15
- Pages
- 3916-3921
- ISSN
- 1433-7851 (ISSN-L)
- 1521-3773
- OpenAlex
- W2791364043
- Cited by
- 399
- References
- 46
- FWCI
- 20.32
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.