The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
Metal–Organic Frameworks for High Charge–Discharge Rates in Lithium–Sulfur Batteries
Abstract
We report a new method to promote the conductivities of metal–organic frameworks (MOFs) by 5 to 7 magnitudes, thus their potential in electrochemical applications can be fully revealed. This method combines the polarity and porosity advantages of MOFs with the conductive feature of conductive polymers, in this case, polypyrrole (ppy), to construct ppy‐MOF compartments for the confinement of sulfur in Li–S batteries. The performances of these ppy‐S‐in‐MOF electrodes exceed those of their MOF and ppy counterparts, especially at high charge–discharge rates. For the first time, the critical role of ion diffusion to the high rate performance was elucidated by comparing ppy‐MOF compartments with different pore geometries. The ppy‐S‐in‐PCN‐224 electrode with cross‐linked pores and tunnels stood out, with a high capacity of 670 and 440 mAh g−1 at 10.0 C after 200 and 1000 cycles, respectively, representing a new benchmark for long‐cycle performance at high rate in Li–S batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Selective gas adsorption and separation in metal–organic frameworks
Li, J.-R., Kuppler, R. J., & Zhou, H.-C. (2009) · Chemical Society Reviews · doi:10.1039/b802426j · Cited by 8,932
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
A Chromium Terephthalate-Based Solid with Unusually Large Pore Volumes and Surface Area
Férey, G., Mellot-Draznieks, C., Serre, C., Millange, F., Dutour, J., Surblé, S., & Margiolaki, I. (2005) · Science · doi:10.1126/science.1116275 · Cited by 5,430
Hydrogen Storage in Microporous Metal-Organic Frameworks
Rosi, N. L., Eckert, J., Eddaoudi, M., Vodak, D. T., Kim, J., O'Keeffe, M., & Yaghi, O. M. (2003) · Science · doi:10.1126/science.1083440 · Cited by 4,846
Conductive MOF electrodes for stable supercapacitors with high areal capacitance
Sheberla, D., Bachman, J. C., Elias, J. S., Sun, C.-J., Shao-Horn, Y., & Dincă, M. (2017) · Nature Materials · doi:10.1038/nmat4766 · Cited by 2,370
Nanostructured sulfur cathodes
Yang, Y., Zheng, G., & Cui, Y. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35256g · Cited by 1,947
Hydrocarbon Separations in a Metal-Organic Framework with Open Iron(II) Coordination Sites
Bloch, E. D., Queen, W. L., Krishna, R., Zadrozny, J. M., Brown, C. M., & Long, J. R. (2012) · Science · doi:10.1126/science.1217544 · Cited by 1,928
Xia, W., Mahmood, A., Zou, R., & Xu, Q. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00762c · Cited by 1,717
Smaller Sulfur Molecules Promise Better Lithium–Sulfur Batteries
Xin, S., Gu, L., Zhao, N.-H., Yin, Y.-X., Zhou, L.-J., Guo, Y.-G., & Wan, L.-J. (2012) · Journal of the American Chemical Society · doi:10.1021/ja308170k · Cited by 1,644
Lithium–sulphur batteries with a microporous carbon paper as a bifunctional interlayer
Su, Y.-S., & Manthiram, A. (2012) · Nature Communications · doi:10.1038/ncomms2163 · Cited by 1,458
Tunable Electrical Conductivity in Metal-Organic Framework Thin-Film Devices
Talin, A. A., Centrone, A., Ford, A. C., Foster, M. E., Stavila, V., Haney, P., Kinney, R. A., Szalai, V., El Gabaly, F., Yoon, H. P., et al. (2014) · Science · doi:10.1126/science.1246738 · Cited by 1,233
Stassen, I., Burtch, N., Talin, A., Falcaro, P., Allendorf, M., & Ameloot, R. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00122c · Cited by 1,210
Construction of Ultrastable Porphyrin Zr Metal–Organic Frameworks through Linker Elimination
Feng, D., Chung, W.-C., Wei, Z., Gu, Z.-Y., Jiang, H.-L., Chen, Y.-P., Darensbourg, D. J., & Zhou, H.-C. (2013) · Journal of the American Chemical Society · doi:10.1021/ja408084j · Cited by 1,126
Self-citationXiao, L., Cao, Y., Xiao, J., Schwenzer, B., Engelhard, M. H., Saraf, L. V., Nie, Z., Exarhos, G. J., & Liu, J. (2012) · Advanced Materials · doi:10.1002/adma.201103392 · Cited by 1,016
An, J., Geib, S. J., & Rosi, N. L. (2010) · Journal of the American Chemical Society · doi:10.1021/ja909169x · Cited by 937
He, C., Lu, K., Liu, D., & Lin, W. (2014) · Journal of the American Chemical Society · doi:10.1021/ja4098862 · Cited by 885
Improving the Performance of Lithium–Sulfur Batteries by Conductive Polymer Coating
Yang, Y., Yu, G., Cha, J. J., Wu, H., Vosgueritchian, M., Yao, Y., Bao, Z., & Cui, Y. (2011) · ACS Nano · doi:10.1021/nn203436j · Cited by 866
Supercapacitors of Nanocrystalline Metal–Organic Frameworks
Choi, K. M., Jeong, H. M., Park, J. H., Zhang, Y.-B., Kang, J. K., & Yaghi, O. M. (2014) · ACS Nano · doi:10.1021/nn5027092 · Cited by 794
Yolk–Shell Structure of Polyaniline-Coated Sulfur for Lithium–Sulfur Batteries
Zhou, W., Yu, Y., Chen, H., DiSalvo, F. J., & Abruña, H. D. (2013) · Journal of the American Chemical Society · doi:10.1021/ja409508q · Cited by 782
Song, J., Gordin, M. L., Xu, T., Chen, S., Yu, Z., Sohn, H., Lu, J., Ren, Y., Duan, Y., & Wang, D. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201411109 · Cited by 776
Anhydrous proton conduction at 150 °C in a crystalline metal–organic framework
Hurd, J. A., Vaidhyanathan, R., Thangadurai, V., Ratcliffe, C. I., Moudrakovski, I. L., & Shimizu, G. K. H. (2009) · Nature Chemistry · doi:10.1038/nchem.402 · Cited by 771
Zheng, J., Tian, J., Wu, D., Gu, M., Xu, W., Wang, C., Gao, F., Engelhard, M. H., Zhang, J.-G., Liu, J., et al. (2014) · Nano Letters · doi:10.1021/nl404721h · Cited by 719
Cathode Composites for Li–S Batteries via the Use of Oxygenated Porous Architectures
Demir-Cakan, R., Morcrette, M., Nouar, F., Davoisne, C., Devic, T., Gonbeau, D., Dominko, R., Serre, C., Férey, G., & Tarascon, J.-M. (2011) · Journal of the American Chemical Society · doi:10.1021/ja2062659 · Cited by 630
Porous carbon nanofiber–sulfur composite electrodes for lithium/sulfur cells
Ji, L., Rao, M., Aloni, S., Wang, L., Cairns, E. J., & Zhang, Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee02256c · Cited by 602
(1970) · Proceedings of the Society for Analytical Chemistry · doi:10.1039/sa9700700069 · Cited by 602
A novel synergistic composite with multi-functional effects for high-performance Li–S batteries
Li, Y.-J., Fan, J.-M., Zheng, M.-S., & Dong, Q.-F. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00104a · Cited by 600
Selectivity and direct visualization of carbon dioxide and sulfur dioxide in a decorated porous host
Yang, S., Sun, J., Ramirez-Cuesta, A. J., Callear, S. K., David, W. I. F., Anderson, D. P., Newby, R., Blake, A. J., Parker, J. E., Tang, C. C., et al. (2012) · Nature Chemistry · doi:10.1038/nchem.1457 · Cited by 554
Multifunctional metal–organic frameworks constructed from meta-benzenedicarboxylate units
He, Y., Li, B., O'Keeffe, M., & Chen, B. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00041b · Cited by 506
Zhou, J., Li, R., Fan, X., Chen, Y., Han, R., Li, W., Zheng, J., Wang, B., & Li, X. (2014) · Energy & Environmental Science · doi:10.1039/c4ee01382d · Cited by 492
Porous Field-Effect Transistors Based on a Semiconductive Metal–Organic Framework
Wu, G., Huang, J., Zang, Y., He, J., & Xu, G. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b08511 · Cited by 490
Li, Z., Li, C., Ge, X., Ma, J., Zhang, Z., Li, Q., Wang, C., & Yin, L. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.02.049 · Cited by 449
Hydroxylated Graphene–Sulfur Nanocomposites for High‐Rate Lithium–Sulfur Batteries
Zu, C., & Manthiram, A. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201201080 · Cited by 435
Embedding Sulfur in MOF‐Derived Microporous Carbon Polyhedrons for Lithium–Sulfur Batteries
Wu, H. B., Wei, S., Zhang, L., Xu, R., Hng, H. H., & Lou, X. W. (. (2013) · Chemistry – A European Journal · doi:10.1002/chem.201301689 · Cited by 386
Metal–Organic Frameworks as Cathode Materials for Li–O2 Batteries
Wu, D., Guo, Z., Yin, X., Pang, Q., Tu, B., Zhang, L., Wang, Y., & Li, Q. (2014) · Advanced Materials · doi:10.1002/adma.201305492 · Cited by 336
Dong, Z., Sun, Y., Chu, J., Zhang, X., & Deng, H. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b07392 · Cited by 282
Self-citationExtra adsorption and adsorbate superlattice formation in metal-organic frameworks
Sung Cho, H., Deng, H., Miyasaka, K., Dong, Z., Cho, M., Neimark, A. V., Ku Kang, J., Yaghi, O. M., & Terasaki, O. (2015) · Nature · doi:10.1038/nature15734 · Cited by 259
Self-citationMetal-organic frameworks for lithium ion batteries and supercapacitors
Ke, F.-S., Wu, Y.-S., & Deng, H. (2015) · Journal of Solid State Chemistry · doi:10.1016/j.jssc.2014.07.008 · Cited by 225
Self-citationWang, Z., Wang, B., Yang, Y., Cui, Y., Wang, Z., Chen, B., & Qian, G. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b07024 · Cited by 218
Highly selective and sensitive room temperature NO2 gas sensor based on polypyrrole thin films
Navale, S. T., Mane, A. T., Chougule, M. A., Sakhare, R. D., Nalage, S. R., & Patil, V. B. (2014) · Synthetic Metals · doi:10.1016/j.synthmet.2014.01.002 · Cited by 201
Song, J., Gordin, M. L., Xu, T., Chen, S., Yu, Z., Sohn, H., Lu, J., Ren, Y., Duan, Y., & Wang, D. (2015) · Angewandte Chemie · doi:10.1002/ange.201411109 · Cited by 201
Liu, Y., Li, G., Fu, J., Chen, Z., & Peng, X. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201700686 · Cited by 180
Hao, G., Tang, C., Zhang, E., Zhai, P., Yin, J., Zhu, W., Zhang, Q., & Kaskel, S. (2017) · Advanced Materials · doi:10.1002/adma.201702829 · Cited by 169
Immobilization of Sodium Ions on the Pore Surface of a Porous Coordination Polymer
Horike, S., Matsuda, R., Tanaka, D., Mizuno, M., Endo, K., & Kitagawa, S. (2006) · Journal of the American Chemical Society · doi:10.1021/ja0606879 · Cited by 139
Porous carbon nanotubes etched by water steam for high-rate large-capacity lithium–sulfur batteries
Xiao, Z., Yang, Z., Nie, H., Lu, Y., Yang, K., & Huang, S. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta00630e · Cited by 136
Zhou, Y., Zhou, C., Li, Q., et al. (2015) · Advanced Materials · doi:10.1002/adma.201501082 · Cited by 101
Sun, Q., Fang, X., Weng, W., Deng, J., Chen, P., Ren, J., Guan, G., Wang, M., & Peng, H. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201504514 · Cited by 95
Cited by
Electrically Conductive Metal–Organic Frameworks
Xie, L. S., Skorupskii, G., & Dincă, M. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00766 · Cited by 1,999
Baumann, A. E., Burns, D. A., Liu, B., & Thoi, V. S. (2019) · Communications Chemistry · doi:10.1038/s42004-019-0184-6 · Cited by 1,088
Synthesis of micro/nanoscaled metal–organic frameworks and their direct electrochemical applications
Xiao, X., Zou, L., Pang, H., & Xu, Q. (2020) · Chemical Society Reviews · doi:10.1039/c7cs00614d · Cited by 882
Metal–organic frameworks as a platform for clean energy applications
Li, X., Yang, X., Xue, H., Pang, H., & Xu, Q. (2020) · EnergyChem · doi:10.1016/j.enchem.2020.100027 · Cited by 706
Metal-Organic Frameworks for Batteries
Zhao, R., Liang, Z., Zou, R., & Xu, Q. (2018) · Joule · doi:10.1016/j.joule.2018.09.019 · Cited by 670
Metadata
- Authors
- Jiang, H., Liu, X., Wu, Y., Shu, Y., Gong, X., Ke, F., & Deng, H.
- Venue
- Angewandte Chemie International Edition
- Publisher
- Wiley
- Published
- 2018-02-27
- Volume
- 57
- Issue
- 15
- Pages
- 3916-3921
- ISSN
- 1433-7851 (ISSN-L)
- 1521-3773
- OpenAlex
- W2791364043
- Cited by
- 399
- References
- 46
- FWCI
- 20.32
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.