The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Stabilization of Highly Efficient and Stable Phase‐Pure FAPbI 3 Perovskite Solar Cells by Molecularly Tailored 2D‐Overlayers
Open accessAbstract
As a result of their attractive optoelectronic properties, metal halide APbI 3 perovskites employing formamidinium (FA + ) as the A cation are the focus of research. The superior chemical and thermal stability of FA + cations makes α‐FAPbI 3 more suitable for solar‐cell applications than methylammonium lead iodide (MAPbI 3 ). However, its spontaneous conversion into the yellow non‐perovskite phase ( δ ‐FAPbI 3 ) under ambient conditions poses a serious challenge for practical applications. Herein, we report on the stabilization of the desired α‐FAPbI 3 perovskite phase by protecting it with a two‐dimensional (2D) IBA 2 FAPb 2 I 7 (IBA= iso ‐butylammonium overlayer, formed via stepwise annealing. The α‐FAPbI 3 /IBA 2 FAPb 2 I 7 based perovskite solar cell (PSC) reached a high power conversion efficiency (PCE) of close to 23 %. In addition, it showed excellent operational stability, retaining around 85 % of its initial efficiency under severe combined heat and light stress, that is, simultaneous exposure with maximum power tracking to full simulated sunlight at 80 °C over 500 h.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Self-citationKim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Self-citationCompositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
Self-citationHigh-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Self-citationIodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells
Yang, W. S., Park, B.-W., Jung, E. H., Jeon, N. J., Kim, Y. C., Lee, D. U., Shin, S. S., Seo, J., Kim, E. K., Noh, J. H., et al. (2017) · Science · doi:10.1126/science.aan2301 · Cited by 5,445
Self-citationA hole-conductor–free, fully printable mesoscopic perovskite solar cell with high stability
Mei, A., Li, X., Liu, L., Ku, Z., Liu, T., Rong, Y., Xu, M., Hu, M., Chen, J., Yang, Y., et al. (2014) · Science · doi:10.1126/science.1254763 · Cited by 3,043
Self-citationIntrinsic Thermal Instability of Methylammonium Lead Trihalide Perovskite
Conings, B., Drijkoningen, J., Gauquelin, N., Babayigit, A., D'Haen, J., D'Olieslaeger, L., Ethirajan, A., Verbeeck, J., Manca, J., Mosconi, E., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500477 · Cited by 2,234
Challenges for commercializing perovskite solar cells
Rong, Y., Hu, Y., Mei, A., Tan, H., Saidaminov, M. I., Seok, S. I., McGehee, M. D., Sargent, E. H., & Han, H. (2018) · Science · doi:10.1126/science.aat8235 · Cited by 2,140
Cited by
Long-term operating stability in perovskite photovoltaics
Zhu, H., Teale, S., Lintangpradipto, M. N., Mahesh, S., Chen, B., McGehee, M. D., Sargent, E. H., & Bakr, O. M. (2023) · Nature Reviews Materials · doi:10.1038/s41578-023-00582-w · Cited by 739
Self-citationBu, T., Li, J., Li, H., Tian, C., Su, J., Tong, G., Ono, L. K., Wang, C., Lin, Z., Chai, N., et al. (2021) · Science · doi:10.1126/science.abh1035 · Cited by 731
Engineering ligand reactivity enables high-temperature operation of stable perovskite solar cells
Park, S. M., Wei, M., Xu, J., Atapattu, H. R., Eickemeyer, F. T., Darabi, K., Grater, L., Yang, Y., Liu, C., Teale, S., et al. (2023) · Science · doi:10.1126/science.adi4107 · Cited by 492
Self-citationA general approach to high-efficiency perovskite solar cells by any antisolvent
Taylor, A. D., Sun, Q., Goetz, K. P., An, Q., Schramm, T., Hofstetter, Y., Litterst, M., Paulus, F., & Vaynzof, Y. (2021) · Nature Communications · doi:10.1038/s41467-021-22049-8 · Cited by 451
Tailoring passivators for highly efficient and stable perovskite solar cells
Zhang, H., Pfeifer, L., Zakeeruddin, S. M., Chu, J., & Grätzel, M. (2023) · Nature Reviews Chemistry · doi:10.1038/s41570-023-00510-0 · Cited by 386
Self-citation
Metadata
- Authors
- Liu, Y., Akin, S., Hinderhofer, A., Eickemeyer, F. T., Zhu, H., Seo, J., Zhang, J., Schreiber, F., Zhang, H., Zakeeruddin, S. M., Hagfeldt, A., Dar, M. I., & Grätzel, M.
- Venue
- Angewandte Chemie International Edition
- Publisher
- Wiley
- Published
- 2020-06-22
- Volume
- 59
- Issue
- 36
- Pages
- 15688-15694
- ISSN
- 1433-7851 (ISSN-L)
- 1521-3773
- OpenAlex
- W3025922687
- Cited by
- 260
- References
- 37
- FWCI
- 15.95
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Stabilization of Highly Efficient and Stable Phase‐Pure FAPbI 3 Perovskite Solar Cells by Molecularly Tailored 2D‐Overlayers. https://app.cochat.ai/papers/10.1002/anie.202005211
- The paper
- Liu, Y., Akin, S., Hinderhofer, A., Eickemeyer, F. T., Zhu, H., Seo, J., Zhang, J., Schreiber, F., Zhang, H., Zakeeruddin, S. M., Hagfeldt, A., Dar, M. I., & Grätzel, M. (2020). Stabilization of Highly Efficient and Stable Phase‐Pure FAPbI 3 Perovskite Solar Cells by Molecularly Tailored 2D‐Overlayers. Angewandte Chemie International Edition. https://doi.org/10.1002/anie.202005211
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.