The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Stabilization of Highly Efficient and Stable Phase‐Pure FAPbI 3 Perovskite Solar Cells by Molecularly Tailored 2D‐Overlayers
Open accessAbstract
As a result of their attractive optoelectronic properties, metal halide APbI 3 perovskites employing formamidinium (FA + ) as the A cation are the focus of research. The superior chemical and thermal stability of FA + cations makes α‐FAPbI 3 more suitable for solar‐cell applications than methylammonium lead iodide (MAPbI 3 ). However, its spontaneous conversion into the yellow non‐perovskite phase ( δ ‐FAPbI 3 ) under ambient conditions poses a serious challenge for practical applications. Herein, we report on the stabilization of the desired α‐FAPbI 3 perovskite phase by protecting it with a two‐dimensional (2D) IBA 2 FAPb 2 I 7 (IBA= iso ‐butylammonium overlayer, formed via stepwise annealing. The α‐FAPbI 3 /IBA 2 FAPb 2 I 7 based perovskite solar cell (PSC) reached a high power conversion efficiency (PCE) of close to 23 %. In addition, it showed excellent operational stability, retaining around 85 % of its initial efficiency under severe combined heat and light stress, that is, simultaneous exposure with maximum power tracking to full simulated sunlight at 80 °C over 500 h.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Self-citationKim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Self-citationCompositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
Self-citationHigh-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Self-citationIodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells
Yang, W. S., Park, B.-W., Jung, E. H., Jeon, N. J., Kim, Y. C., Lee, D. U., Shin, S. S., Seo, J., Kim, E. K., Noh, J. H., et al. (2017) · Science · doi:10.1126/science.aan2301 · Cited by 5,445
Self-citationA hole-conductor–free, fully printable mesoscopic perovskite solar cell with high stability
Mei, A., Li, X., Liu, L., Ku, Z., Liu, T., Rong, Y., Xu, M., Hu, M., Chen, J., Yang, Y., et al. (2014) · Science · doi:10.1126/science.1254763 · Cited by 3,043
Self-citationIntrinsic Thermal Instability of Methylammonium Lead Trihalide Perovskite
Conings, B., Drijkoningen, J., Gauquelin, N., Babayigit, A., D'Haen, J., D'Olieslaeger, L., Ethirajan, A., Verbeeck, J., Manca, J., Mosconi, E., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500477 · Cited by 2,234
Challenges for commercializing perovskite solar cells
Rong, Y., Hu, Y., Mei, A., Tan, H., Saidaminov, M. I., Seok, S. I., McGehee, M. D., Sargent, E. H., & Han, H. (2018) · Science · doi:10.1126/science.aat8235 · Cited by 2,140
Ruddlesden–Popper Hybrid Lead Iodide Perovskite 2D Homologous Semiconductors
Stoumpos, C. C., Cao, D. H., Clark, D. J., Young, J., Rondinelli, J. M., Jang, J. I., Hupp, J. T., & Kanatzidis, M. G. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00847 · Cited by 2,130
One-Year stable perovskite solar cells by 2D/3D interface engineering
Grancini, G., Roldán-Carmona, C., Zimmermann, I., Mosconi, E., Lee, X., Martineau, D., Narbey, S., Oswald, F., De Angelis, F., Graetzel, M., et al. (2017) · Nature Communications · doi:10.1038/ncomms15684 · Cited by 2,068
Bi, D., Yi, C., Luo, J., Décoppet, J.-D., Zhang, F., Zakeeruddin, S. M., Li, X., Hagfeldt, A., & Grätzel, M. (2016) · Nature Energy · doi:10.1038/nenergy.2016.142 · Cited by 2,037
Self-citationKim, M., Kim, G.-H., Lee, T. K., Choi, I. W., Choi, H. W., Jo, Y., Yoon, Y. J., Kim, J. W., Lee, J., Huh, D., et al. (2019) · Joule · doi:10.1016/j.joule.2019.06.014 · Cited by 1,753
Organic–inorganic hybrid lead halide perovskites for optoelectronic and electronic applications
Zhao, Y., & Zhu, K. (2016) · Chemical Society Reviews · doi:10.1039/c4cs00458b · Cited by 1,661
Arora, N., Dar, M. I., Hinderhofer, A., Pellet, N., Schreiber, F., Zakeeruddin, S. M., & Grätzel, M. (2017) · Science · doi:10.1126/science.aam5655 · Cited by 1,546
Self-citationWang, Z., Lin, Q., Chmiel, F. P., Sakai, N., Herz, L. M., & Snaith, H. J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.135 · Cited by 1,409
Stability of Metal Halide Perovskite Solar Cells
Leijtens, T., Eperon, G. E., Noel, N. K., Habisreutinger, S. N., Petrozza, A., & Snaith, H. J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500963 · Cited by 1,308
Mixed‐Organic‐Cation Perovskite Photovoltaics for Enhanced Solar‐Light Harvesting
Pellet, N., Gao, P., Gregori, G., Yang, T., Nazeeruddin, M. K., Maier, J., & Grätzel, M. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201309361 · Cited by 1,306
Self-citationYi, C., Luo, J., Meloni, S., Boziki, A., Ashari-Astani, N., Grätzel, C., Zakeeruddin, S. M., Röthlisberger, U., & Grätzel, M. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03255e · Cited by 1,281
Self-citationMethylammonium-free, high-performance, and stable perovskite solar cells on a planar architecture
Turren-Cruz, S.-H., Hagfeldt, A., & Saliba, M. (2018) · Science · doi:10.1126/science.aat3583 · Cited by 1,055
Self-citationZhao, D., Yu, Y., Wang, C., Liao, W., Shrestha, N., Grice, C. R., Cimaroli, A. J., Guan, L., Ellingson, R. J., Zhu, K., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.18 · Cited by 776
2D perovskite stabilized phase-pure formamidinium perovskite solar cells
Lee, J.-W., Dai, Z., Han, T.-H., Choi, C., Chang, S.-Y., Lee, S.-J., De Marco, N., Zhao, H., Sun, P., Huang, Y., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-05454-4 · Cited by 746
Liu, Y., Akin, S., Pan, L., Uchida, R., Arora, N., Milić, J. V., Hinderhofer, A., Schreiber, F., Uhl, A. R., Zakeeruddin, S. M., et al. (2019) · Science Advances · doi:10.1126/sciadv.aaw2543 · Cited by 710
Self-citationCubic Perovskite Structure of Black Formamidinium Lead Iodide, α-[HC(NH2)2]PbI3, at 298 K
Weller, M. T., Weber, O. J., Frost, J. M., & Walsh, A. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b01432 · Cited by 580
Wu, W.-Q., Yang, Z., Rudd, P. N., Shao, Y., Dai, X., Wei, H., Zhao, J., Fang, Y., Wang, Q., Liu, Y., et al. (2019) · Science Advances · doi:10.1126/sciadv.aav8925 · Cited by 522
Self-citationLiao, W., Zhao, D., Yu, Y., Shrestha, N., Ghimire, K., Grice, C. R., Wang, C., Xiao, Y., Cimaroli, A. J., Ellingson, R. J., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b08337 · Cited by 438
Tailored Amphiphilic Molecular Mitigators for Stable Perovskite Solar Cells with 23.5% Efficiency
Zhu, H., Liu, Y., Eickemeyer, F. T., Pan, L., Ren, D., Ruiz‐Preciado, M. A., Carlsen, B., Yang, B., Dong, X., Wang, Z., et al. (2020) · Advanced Materials · doi:10.1002/adma.201907757 · Cited by 412
Self-citationCho, Y., Soufiani, A. M., Yun, J. S., Kim, J., Lee, D. S., Seidel, J., Deng, X., Green, M. A., Huang, S., & Ho‐Baillie, A. W. Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703392 · Cited by 334
Billing, D. G., & Lemmerer, A. (2007) · Acta Crystallographica Section B Structural Science · doi:10.1107/s0108768107031758 · Cited by 309
Novel p-dopant toward highly efficient and stable perovskite solar cells
Seo, J.-Y., Kim, H.-S., Akin, S., Stojanovic, M., Simon, E., Fleischer, M., Hagfeldt, A., Zakeeruddin, S. M., & Grätzel, M. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01500g · Cited by 277
Self-citationThe Many Faces of Mixed Ion Perovskites: Unraveling and Understanding the Crystallization Process
Gratia, P., Zimmermann, I., Schouwink, P., Yum, J.-H., Audinot, J.-N., Sivula, K., Wirtz, T., & Nazeeruddin, M. K. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00981 · Cited by 258
Pearson, A. J., Eperon, G. E., Hopkinson, P. E., Habisreutinger, S. N., Wang, J. T., Snaith, H. J., & Greenham, N. C. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600014 · Cited by 256
Stabilization of the Metastable Lead Iodide Perovskite Phase via Surface Functionalization
Fu, Y., Wu, T., Wang, J., Zhai, J., Shearer, M. J., Zhao, Y., Hamers, R. J., Kan, E., Deng, K., Zhu, X.-Y., et al. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b01500 · Cited by 247
Additive-Modulated Evolution of HC(NH2)2PbI3 Black Polymorph for Mesoscopic Perovskite Solar Cells
Wang, Z., Zhou, Y., Pang, S., Xiao, Z., Zhang, J., Chai, W., Xu, H., Liu, Z., Padture, N. P., & Cui, G. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b03169 · Cited by 237
Self-citationMixed‐Organic‐Cation Perovskite Photovoltaics for Enhanced Solar‐Light Harvesting
Pellet, N., Gao, P., Gregori, G., Yang, T., Nazeeruddin, M. K., Maier, J., & Grätzel, M. (2014) · Angewandte Chemie · doi:10.1002/ange.201309361 · Cited by 185
Self-citationIndustrial Opportunities and Challenges for Perovskite Photovoltaic Technology
Wojciechowski, K., Forgács, D., & Rivera, T. (2019) · Solar RRL · doi:10.1002/solr.201900144 · Cited by 66
Cited by
Stabilizing black-phase formamidinium perovskite formation at room temperature and high humidity
Hui, W., Chao, L., Lu, H., Xia, F., Wei, Q., Su, Z., Niu, T., Tao, L., Du, B., Li, D., et al. (2021) · Science · doi:10.1126/science.abf7652 · Cited by 806
Self-citationLong-term operating stability in perovskite photovoltaics
Zhu, H., Teale, S., Lintangpradipto, M. N., Mahesh, S., Chen, B., McGehee, M. D., Sargent, E. H., & Bakr, O. M. (2023) · Nature Reviews Materials · doi:10.1038/s41578-023-00582-w · Cited by 739
Self-citationBu, T., Li, J., Li, H., Tian, C., Su, J., Tong, G., Ono, L. K., Wang, C., Lin, Z., Chai, N., et al. (2021) · Science · doi:10.1126/science.abh1035 · Cited by 731
Engineering ligand reactivity enables high-temperature operation of stable perovskite solar cells
Park, S. M., Wei, M., Xu, J., Atapattu, H. R., Eickemeyer, F. T., Darabi, K., Grater, L., Yang, Y., Liu, C., Teale, S., et al. (2023) · Science · doi:10.1126/science.adi4107 · Cited by 492
Self-citationA general approach to high-efficiency perovskite solar cells by any antisolvent
Taylor, A. D., Sun, Q., Goetz, K. P., An, Q., Schramm, T., Hofstetter, Y., Litterst, M., Paulus, F., & Vaynzof, Y. (2021) · Nature Communications · doi:10.1038/s41467-021-22049-8 · Cited by 451
Metadata
- Authors
- Liu, Y., Akin, S., Hinderhofer, A., Eickemeyer, F. T., Zhu, H., Seo, J., Zhang, J., Schreiber, F., Zhang, H., Zakeeruddin, S. M., Hagfeldt, A., Dar, M. I., & Grätzel, M.
- Venue
- Angewandte Chemie International Edition
- Publisher
- Wiley
- Published
- 2020-06-22
- Volume
- 59
- Issue
- 36
- Pages
- 15688-15694
- ISSN
- 1433-7851 (ISSN-L)
- 1521-3773
- OpenAlex
- W3025922687
- Cited by
- 260
- References
- 37
- FWCI
- 15.95
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.