The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
The effects of plasticizers on the dynamic mechanical and thermal properties of poly(lactic acid)
Abstract
Poly(lactic acid) (PLA) was blended with five plasticizers in a batchwise mixer and pressed into films. The films were analyzed by means of dynamic mechanical analysis and differential scanning calorimetry to investigate the properties of the blends. Triacetine and tributyl citrate proved to be effective as plasticizers when blended with PLA. The glass transition temperature of PLA decreased linearly as the plasticizer content was increased. Both plasticizers were miscible with PLA to an extent of ∼ 25 wt %. At this point, the PLA seemed to be saturated with plasticizer and the blends tended to phase separate when more plasticizer was added. There were also signs of phase separation occurring in samples heated at 35, 50, and 80°C, most likely because of the material undergoing crystallization. The presence of the plasticizers induced an increased crystallinity by enhancing the molecular mobility. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1227–1234, 2002
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562
Nijenhuis, A. J., Colstee, E., Grijpma, D. W., & Pennings, A. J. (1996) · Polymer · doi:10.1016/s0032-3861(96)00455-7 · Cited by 479
Citrate esters as plasticizers for poly(lactic acid)
Labrecque, L. V., Kumar, R. A., Dav�, V., Gross, R. A., & McCarthy, S. P. (1997) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19971121)66:8<1507::aid-app11>3.0.co;2-0 · Cited by 466
Miscibility, crystallization and melting of poly(3-hydroxybutyrate)/ poly(l-lactide) blends
Blümm, E., & Owen, A. J. (1995) · Polymer · doi:10.1016/0032-3861(95)90987-d · Cited by 289
Modification of poly(L‐lactides) by blending: mechanical and hydrolytic behavior
Hiljanen‐Vainio, M., Varpomaa, P., Seppälä, J., & Törmälä, P. (1996) · Macromolecular Chemistry and Physics · doi:10.1002/macp.1996.021970427 · Cited by 249
Yang, J.-M., Chen, H.-L., You, J.-W., & Hwang, J. C. (1997) · Polymer Journal · doi:10.1295/polymj.29.657 · Cited by 163
Iannace, S., Ambrosio, L., Huang, S. J., & Nicolais, L. (1994) · Journal of Applied Polymer Science · doi:10.1002/app.1994.070541017 · Cited by 117
Polylactides ‐ degradable polymers for fibres and films
Meinander, K., Niemi, M., Hakola, J. S., & Selin, J. (1997) · Macromolecular Symposia · doi:10.1002/masy.19971230115 · Cited by 63
Lostocco, M. R., Borzacchiello, A., & Huang, S. J. (1998) · Macromolecular Symposia · doi:10.1002/masy.19981300114 · Cited by 21
Cited by
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Microfibrillated cellulose and new nanocomposite materials: a review
Siró, I., & Plackett, D. (2010) · Cellulose · doi:10.1007/s10570-010-9405-y · Cited by 2,883
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
Poly‐Lactic Acid: Production, Applications, Nanocomposites, and Release Studies
Jamshidian, M., Tehrany, E. A., Imran, M., Jacquot, M., & Desobry, S. (2010) · Comprehensive Reviews in Food Science and Food Safety · doi:10.1111/j.1541-4337.2010.00126.x · Cited by 1,557
Progress in bio-based plastics and plasticizing modifications
Mekonnen, T., Mussone, P., Khalil, H., & Bressler, D. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta12555f · Cited by 831
Research progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767
Crystallization, structure and properties of plasticized poly(l-lactide)
Kulinski, Z., & Piorkowska, E. (2005) · Polymer · doi:10.1016/j.polymer.2005.07.101 · Cited by 540
Polylactides—Chemistry, Properties and Green Packaging Technology: A Review
Ahmed, J., & Varshney, S. K. (2011) · International Journal of Food Properties · doi:10.1080/10942910903125284 · Cited by 454
Combination of Poly(lactic) Acid and Starch for Biodegradable Food Packaging
Muller, J., González-Martínez, C., & Chiralt, A. (2017) · Materials · doi:10.3390/ma10080952 · Cited by 447
Pillin, I., Montrelay, N., & Grohens, Y. (2006) · Polymer · doi:10.1016/j.polymer.2006.04.013 · Cited by 366
Preparation and Properties of Plasticized Poly(lactic acid) Films
Ljungberg, N., & Wesslén, B. (2005) · Biomacromolecules · doi:10.1021/bm050098f · Cited by 331
Self-citationPlasticization of Poly(l-lactide) with Poly(propylene glycol)
Kulinski, Z., Piorkowska, E., Gadzinowska, K., & Stasiak, M. (2006) · Biomacromolecules · doi:10.1021/bm060089m · Cited by 320
A Review of Poly(Lactic Acid)‐Based Materials for Antimicrobial Packaging
Tawakkal, I. S. M. A., Cran, M. J., Miltz, J., & Bigger, S. W. (2014) · Journal of Food Science · doi:10.1111/1750-3841.12534 · Cited by 309
Plasticization of semicrystalline poly(l-lactide) with poly(propylene glycol)
Piorkowska, E., Kulinski, Z., Galeski, A., & Masirek, R. (2006) · Polymer · doi:10.1016/j.polymer.2006.03.115 · Cited by 301
Song, Z., Xiao, H., & Zhao, Y. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.04.049 · Cited by 298
Ljungberg, N., & Wesslén, B. (2003) · Polymer · doi:10.1016/j.polymer.2003.09.055 · Cited by 278
Self-citationPoly(Lactic Acid)-Based Biomaterials: Synthesis, Modification and Applications
Xiao, L., Wang, B., Yang, G., & Gauthier, M. (2012) · Biomedical Science, Engineering and Technology · doi:10.5772/23927 · Cited by 277
Aging of poly(lactide)/poly(ethylene glycol) blends. Part 1. Poly(lactide) with low stereoregularity
Hu, Y., Rogunova, M., Topolkaraev, V., Hiltner, A., & Baer, E. (2003) · Polymer · doi:10.1016/s0032-3861(03)00614-1 · Cited by 261
Hu, Y., Hu, Y. S., Topolkaraev, V., Hiltner, A., & Baer, E. (2003) · Polymer · doi:10.1016/s0032-3861(03)00615-3 · Cited by 258
Polylactic Acid: Synthesis, Properties and Applications
Avérous, L. (2008) · Monomers, Polymers and Composites from Renewable Resources · doi:10.1016/b978-0-08-045316-3.00021-1 · Cited by 258
Pluta, M. (2004) · Polymer · doi:10.1016/j.polymer.2004.09.057 · Cited by 247
Hu, Y., Hu, Y. S., Topolkaraev, V., Hiltner, A., & Baer, E. (2003) · Polymer · doi:10.1016/s0032-3861(03)00609-8 · Cited by 238
Pluta, M., Paul, M., Alexandre, M., & Dubois, P. (2006) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.20694 · Cited by 127
Miscibility, mechanical and thermal properties of poly(lactic acid)/polyester-diol blends
Okamoto, K., Ichikawa, T., Yokohara, T., & Yamaguchi, M. (2009) · European Polymer Journal · doi:10.1016/j.eurpolymj.2009.05.011 · Cited by 85
Ljungberg, N., Colombini, D., & Wesslén, B. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.21163 · Cited by 73
Self-citationCai, S., Sun, Y.-C., Ren, J., & Naguib, H. E. (2017) · Journal of Materials Chemistry B · doi:10.1039/c7tb02068f · Cited by 54
Liu, X., Mo, Z., Cui, L., Yu, C., Zou, Z., Liu, Y., Zheng, W., & Tan, J. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.126976 · Cited by 44
Molinari, G., Aliotta, L., Gigante, V., Gemmi, M., & Lazzeri, A. (2026) · Polymer International · doi:10.1002/pi.70187
Metadata
- Authors
- Ljungberg, N., & Wesslén, B.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2002-08-21
- Volume
- 86
- Issue
- 5
- Pages
- 1227-1234
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2055818561
- Cited by
- 423
- References
- 11
- FWCI
- 4.25
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.