The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Toughening of polylactide by melt blending with linear low‐density polyethylene
Abstract
Melt blending of polylactide and linear low‐density polyethylene (LLDPE) was performed in an effort to toughen polylactide. In addition, two model polylactide‐polyethylene (PLLA‐PE) block copolymers were investigated as compatibilizers. The LLDPE particle size and the impact resistance of binary and ternary blends were measured to determine the extent of compatibilization. For the amorphous polylactide (PLA), toughening was achieved only when a PLLA‐PE block copolymer was used as a compatibilizer. For the semicrystalline polylactide (PLLA), toughening was achieved in the absence of block copolymer. To decrease the variability in the impact resistance of the PLLA/LLDPE binary blend, as little as 0.5 wt % of a PLLA–;PE block copolymer was effective. The differences that were seen between the PLA and PLLA binary blends were investigated with adhesion testing. The semicrystalline PLLA did show significantly better adhesion to the LLDPE. We propose that tacticty effects on the entanglement molecular weight or miscibility of polylactide allow for the improved adhesion between the PLLA and LLDPE. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3757–3768, 2003
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Phase structure and adhesion in polymer blends: A criterion for rubber toughening
Wu, S. (1985) · Polymer · doi:10.1016/0032-3861(85)90015-1 · Cited by 1,426
Theory of the Interface between Immiscible Polymers. II
Helfand, E., & Tagami, Y. (1972) · The Journal of Chemical Physics · doi:10.1063/1.1677735 · Cited by 1,009
Drop Breakup and Coalescence in Polymer Blends: The Effects of Concentration and Compatibilization
Sundararaj, U., & Macosko, C. W. (1995) · Macromolecules · doi:10.1021/ma00112a009 · Cited by 886
Bioresorbability and biocompatibility of aliphatic polyesters
Vert, M., Li, S. M., Spenlehauer, G., & Guerin, P. (1992) · Journal of Materials Science: Materials in Medicine · doi:10.1007/bf00701240 · Cited by 770
A generalized criterion for rubber toughening: The critical matrix ligament thickness
Wu, S. (1988) · Journal of Applied Polymer Science · doi:10.1002/app.1988.070350220 · Cited by 693
Failure mechanisms of polymer interfaces reinforced with block copolymers
Creton, C., Kramer, E. J., Hui, C. Y., & Brown, H. R. (1992) · Macromolecules · doi:10.1021/ma00038a010 · Cited by 470
Favis, B. D., & Chalifoux, J. P. (1987) · Polymer Engineering & Science · doi:10.1002/pen.760272105 · Cited by 357
Eckstein, A., Suhm, J., Friedrich, C., Maier, R.-D., Sassmannshausen, J., Bochmann, M., & Mülhaupt, R. (1998) · Macromolecules · doi:10.1021/ma971270d · Cited by 292
Bartczak, Z., Argon, A. S., Cohen, R. E., & Weinberg, M. (1999) · Polymer · doi:10.1016/s0032-3861(98)00445-5 · Cited by 280
Witzke, D. R., Narayan, R., & Kolstad, J. J. (1997) · Macromolecules · doi:10.1021/ma970631m · Cited by 263
Cited by
Hahladakis, J. N., Velis, C. A., Weber, R., Iacovidou, E., & Purnell, P. (2018) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2017.10.014 · Cited by 3,873
“For example, contamination of polylactide (PLA) by linear LDPE makes it significantly more impact resistant when these two polymers are compatibilized [86].”
BackgroundAn Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
Poly(lactic acid)—Mass production, processing, industrial applications, and end of life
Castro-Aguirre, E., Iñiguez-Franco, F., Samsudin, H., Fang, X., & Auras, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.03.010 · Cited by 1,329
PLA composites: From production to properties
Murariu, M., & Dubois, P. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.003 · Cited by 1,005
Polymers from Renewable Resources: A Perspective for a Special Issue of Polymer Reviews
Williams, C., & Hillmyer, M. (2008) · Polymer Reviews · doi:10.1080/15583720701834133 · Cited by 977
Self-citationAl-Itry, R., Lamnawar, K., & Maazouz, A. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.06.028 · Cited by 906
Poly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Research progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767
Biodegradable Polymers-A Review on Recent Trends and Emerging Perspectives
Luckachan, G. E., & Pillai, C. K. S. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-011-0317-1 · Cited by 767
Recycling of Polymers: A Review
Ignatyev, I. A., Thielemans, W., & Vander Beke, B. (2014) · ChemSusChem · doi:10.1002/cssc.201300898 · Cited by 753
Polylactic acid blends: The future of green, light and tough
Hamad, K., Kaseem, M., Ayyoob, M., Joo, J., & Deri, F. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.07.001 · Cited by 640
Compatibilization in bio-based and biodegradable polymer blends
Imre, B., & Pukánszky, B. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.01.019 · Cited by 613
Super tough poly(lactic acid) blends: a comprehensive review
Zhao, X., Hu, H., Wang, X., Yu, X., Zhou, W., & Peng, S. (2020) · RSC Advances · doi:10.1039/d0ra01801e · Cited by 465
Super-tough poly(lactic acid) materials: Reactive blending with ethylene copolymer
Oyama, H. T. (2009) · Polymer · doi:10.1016/j.polymer.2008.12.025 · Cited by 393
Toughening of Polylactide by Melt Blending with a Biodegradable Poly(ether)urethane Elastomer
Li, Y., & Shimizu, H. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200700027 · Cited by 371
Liu, H., Chen, F., Liu, B., Estep, G., & Zhang, J. (2010) · Macromolecules · doi:10.1021/ma101108g · Cited by 323
Liu, H., Song, W., Chen, F., Guo, L., & Zhang, J. (2011) · Macromolecules · doi:10.1021/ma1026934 · Cited by 317
Anderson, K. S., & Hillmyer, M. A. (2004) · Polymer · doi:10.1016/j.polymer.2004.10.047 · Cited by 300
Self-citationCompatibilization strategies in poly(lactic acid)-based blends
Zeng, J.-B., Li, K.-A., & Du, A.-K. (2015) · RSC Advances · doi:10.1039/c5ra01655j · Cited by 290
Surendren, A., Mohanty, A. K., Liu, Q., & Misra, M. (2022) · Green Chemistry · doi:10.1039/d2gc02169b · Cited by 275
Structure and properties of polylactide/natural rubber blends
Bitinis, N., Verdejo, R., Cassagnau, P., & Lopez-Manchado, M. A. (2011) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2011.05.016 · Cited by 274
Li, Y., & Shimizu, H. (2009) · European Polymer Journal · doi:10.1016/j.eurpolymj.2008.12.010 · Cited by 270
Supertoughened Renewable PLA Reactive Multiphase Blends System: Phase Morphology and Performance
Zhang, K., Nagarajan, V., Misra, M., & Mohanty, A. K. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am502337u · Cited by 267
Bai, H., Xiu, H., Gao, J., Deng, H., Zhang, Q., Yang, M., & Fu, Q. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am201564f · Cited by 260
4D printing of shape memory polylactic acid (PLA)
Mehrpouya, M., Vahabi, H., Janbaz, S., Darafsheh, A., Mazur, T. R., & Ramakrishna, S. (2021) · Polymer · doi:10.1016/j.polymer.2021.124080 · Cited by 258
Progress in Toughening Poly(Lactic Acid) with Renewable Polymers
Wang, M., Wu, Y., Li, Y.-D., & Zeng, J.-B. (2017) · Polymer Reviews · doi:10.1080/15583724.2017.1287726 · Cited by 255
Catalytic Hydroxylation of Polyethylenes
Bunescu, A., Lee, S., Li, Q., & Hartwig, J. F. (2017) · ACS Central Science · doi:10.1021/acscentsci.7b00255 · Cited by 252
Toughening of polylactic acid: an overview of research progress
Krishnan, S., Pandey, P., Mohanty, S., & Nayak, S. K. (2016) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2015.1098698 · Cited by 147
Zolali, A. M., & Favis, B. D. (2018) · Macromolecules · doi:10.1021/acs.macromol.8b00464 · Cited by 100
Odent, J., Leclère, P., Raquez, J.-M., & Dubois, P. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2012.12.006 · Cited by 86
Ugartemendia, J. M., Larrañaga, A., Amestoy, H., Etxeberria, A., & Sarasua, J. R. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.11.040 · Cited by 32
Tetracrystalline Tetrablock Quarterpolymers: Four Different Crystallites under the Same Roof
Ladelta, V., Zapsas, G., Abou‐hamad, E., Gnanou, Y., & Hadjichristidis, N. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201908688 · Cited by 22
Metadata
- Authors
- Anderson, K. S., Lim, S. H., & Hillmyer, M. A.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2003-07-18
- Volume
- 89
- Issue
- 14
- Pages
- 3757-3768
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W1971813459
- Cited by
- 362
- References
- 28
- FWCI
- 4.57
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.