Nanocomposites made from cellulose nanocrystals and tailored segmented polyurethanes
The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Abstract
The effect of the addition of microcrystalline cellulose nanofibers into linear segmented polyurethanes (SPU) was investigated. The polymers were synthesized with 4,4‐methylene‐bisphenyldiisocyanate (MDI) and poly(tetramethyleneglycol) (PTMG) with 1,4‐butanediol (BD) as chain extender. The nanocrystals were introduced during the PU polymerization, which resulted in cellulose nanofibrils covalently linked to the polymer. The interactions between the cellulose nanofibrils and the matrix lead to interesting changes in the behavior of the PU, with the hard segment (HS) phase being more affected by these interactions. SPUs with different contents of HS were synthesized to better understand these effects (23 to 45 wt %). Thermal, thermo‐mechanical and mechanical characterization of the nanocomposites were performed. In general, the nanocellulose favored the phase separation between the soft and hard domains generating an upward shift in the melting temperatures of the crystalline phases, an increase in the Young's modulus and a decrease in deformation at break. Comparison of the unfilled polymer responses and that of the nanocomposites showed that by increasing cellulose content, increased dynamic storage and tensile modulus as well as melting temperatures and enthalpy of melting of the soft domains can be achieved. Addition of cellulose during the polymerization essentially erased the potential shape memory behavior originally displayed by some of the SPU. However, a sample prepared by adding the cellulose nanocrystals after the reaction showed that the mechanical properties were still improved, while the shape memory behavior of the polymer was preserved. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Koerner, H., Price, G., Pearce, N. A., Alexander, M., & Vaia, R. A. (2004) · Nature Materials · doi:10.1038/nmat1059 · Cited by 1,034
Recent advances in shape memory polymers and composites: a review
Ratna, D., & Karger-Kocsis, J. (2008) · Journal of Materials Science · doi:10.1007/s10853-007-2176-7 · Cited by 942
Polyurethanes having shape memory effects
Kim, B. K., Lee, S. Y., & Xu, M. (1996) · Polymer · doi:10.1016/s0032-3861(96)00442-9 · Cited by 693
Structure and thermomechanical properties of polyurethane block copolymers with shape memory effect
Lee, B. S., Chun, B. C., Chung, Y.-C., Sul, K. I., & Cho, J. W. (2001) · Macromolecules · doi:10.1021/ma001842l · Cited by 430
Shape memory polymer nanocomposites
Gall, K. (2002) · Acta Materialia · doi:10.1016/s1359-6454(02)00368-3 · Cited by 429
Improvement of starch film performances using cellulose microfibrils
Dufresne, A., & Vignon, M. R. (1998) · Macromolecules · doi:10.1021/ma971532b · Cited by 409
AB-polymer networks based on oligo(ɛ-caprolactone) segments showing shape-memory properties
Lendlein, A., Schmidt, A. M., & Langer, R. (2001) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.98.3.842 · Cited by 303
A high strength nanocomposite based on microcrystalline cellulose and polyurethane
Wu, Q., Henriksson, M., Liu, X., & Berglund, L. A. (2007) · Biomacromolecules · doi:10.1021/bm701061t · Cited by 265
Thermomechanical recovery couplings of shape memory polymers in flexure
Liu, Y., Gall, K., Dunn, M. L., & McCluskey, P. (2003) · Smart Materials and Structures · doi:10.1088/0964-1726/12/6/012 · Cited by 114
Cited by
Hu, J., Zhu, Y., Huang, H., & Lu, J. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.06.001 · Cited by 1,279
Saralegi, A., Gonzalez, M. L., Valea, A., Eceiza, A., & Corcuera, M. A. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2013.12.001 · Cited by 97
“It has to be also taken into account that in the works reported in literature for polyurethane/cellulose nanocomposites [15,16,35,36], where methylene diphenyl 4,40-diisocyanate (MDI) or amorphous soft segments were used, the overall crystallinity of the nanocomposites was lower than the overall crystallinity observed…”
BackgroundMethodAuad, M. L., Richardson, T., Hicks, M., Mosiewicki, M. A., Aranguren, M. I., & Marcovich, N. E. (2012) · Polymer International · doi:10.1002/pi.3193 · Cited by 33
Self-citation
Metadata
- Authors
- Auad, M. L., Mosiewicki, M. A., Richardson, T., Aranguren, M. I., & Marcovich, N. E.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2009-09-15
- Volume
- 115
- Issue
- 2
- Pages
- 1215-1225
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W1971261078
- Cited by
- 74
- References
- 9
- FWCI
- 2.05
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.