Cited by 430Polymer composites and self-healingBlock Copolymer Self-AssemblyAdvanced Materials and Mechanics

Structure and thermomechanical properties of polyurethane block copolymers with shape memory effect

Lee, Bo Sun, Chun, Byoung Chul, Chung, Yong-Chan, Sul, Kyung Il, Cho, Jae Whan·2001·Macromolecules

Abstract

Shape memory polyurethane (PU) block copolymers composed of 4,4‘-methylenebis(phenylisocyanate), poly(tetramethylene glycol), and 1,4-butanediol as a chain extender were synthesized by a two-step process. FT-IR spectra showed that carbonyl peak appearing at 1700 cm -1 increased with higher hard segment content, whereas another carbonyl peak at 1730 cm -1 decreased. It suggests that hard segments get more aggregated to form domains in the PU block copolymer as hard segment content increases. Such domain formation has a significant influence on the mechanical and thermomechanical properties of PU, such as maximum stress, tensile modulus, and elongation at break. Especially, maximum stress, tensile modulus, and elongation at break increased significantly at 30 wt % of hard segment content, and the highest loss tangent was observed at the same composition. Heat of crystallization as measured by differential scanning calorimetry is also dependent on the hard segment content. Finally, 80−95% of shape recovery was obtained at 30−45 wt % of hard segment content, and the control of hard segment content in PU block copolymers is very important in determining their physical properties.

Integrity signals

Registry

Crossref · 10.1021/ma001842l

Cites

10 of 10 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

  • The synthesis route (e.g., ratio of hard to soft segments) and polymerization procedure directly impact shape memory properties and polymer crystallinity with respect to domain size distribution, ordering, grain size and symmetry.

    “The synthesis route (e.g., the ratio of hard to soft segments) and the polymerization procedure directly impact SM properties and the polymer's crystallinity with respect to domain size distribution, ordering, grain size and symmetry [73,74,153].”

Cites

Flagged first, then by citations

Cited by

Sorted by citations

Authors
Lee, B. S., Chun, B. C., Chung, Y.-C., Sul, K. I., & Cho, J. W.
Affiliations
University of Suwon (KR)
Venue
Macromolecules
Published
2001-07-31
Volume
34
Issue
18
Pages
6431-6437
ISSN
  • 0024-9297 (ISSN-L)
  • 1520-5835
OpenAlex
W2053327745
Cited by
430
References
10
Citations by year
2026: 5 · 2025: 6 · 2024: 13 · 2023: 7 · 2022: 13 · 2021: 15 · 2020: 18 · 2019: 26 · 2018: 13 · 2017: 23 · 2016: 24 · 2015: 13 · 2014: 16 · 2013: 25 · 2012: 36
FWCI
5.61
Type
journal article
Language
en
Open access
closed
Locations
Macromolecules (publishedVersion)
Topics
  • Physical Sciences › Materials Science › Polymers and Plastics › Polymer composites and self-healing
  • Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
  • Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
Keywords
shape memory polyurethane, block copolymers, hard segment content, polytetramethylene glycol, 1,4-butanediol, thermomechanical properties, tensile properties, loss tangent, heat of crystallization, shape recovery

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review