The DOI matches its Crossref record; 69 of the 69 references it cites were found in a registry or an index.
Recent advances in low‐cost carbon fiber manufacture from lignin
Abstract
The confluence of two US energy policy mandates, the 2012 Corporate Average Fuel Economy Standards and Renewable Fuels Standard #2, provide the opportunity to examine the possibility of high‐value materials from lignin with increased depth. In this case, the desire to provide lighter, low‐cost materials for automobiles to reduce fuel consumption, and to improve the economics of biorefineries for fuel production, have led to an increased interest in low‐cost carbon fiber manufacture from lignin. For this review the authors provide the context of subject matter importance, a cost comparison of potential low‐cost carbon fibers, a brief review of historical work, a review of more recent work, and a limited technical discussion followed by recommendations for future directions. As the available material for review is limited, the author includes many references to publicly available government documents and reviewed proceedings that are generally difficult to locate. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 713‐728, 2013
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on polymer nanofibers by electrospinning and their applications in nanocomposites
Huang, Z.-M., Zhang, Y.-Z., Kotaki, M., & Ramakrishna, S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00178-7 · Cited by 7,556
Bozell, J. J., & Petersen, G. R. (2010) · Green Chemistry · doi:10.1039/b922014c · Cited by 4,566
Electrospinning jets and polymer nanofibers
Reneker, D. H., & Yarin, A. L. (2008) · Polymer · doi:10.1016/j.polymer.2008.02.002 · Cited by 2,306
A review on electrospinning design and nanofibre assemblies
Teo, W. E., & Ramakrishna, S. (2006) · Nanotechnology · doi:10.1088/0957-4484/17/14/r01 · Cited by 2,289
Electrospinning of Polymeric Nanofibers for Tissue Engineering Applications: A Review
Pham, Q. P., Sharma, U., & Mikos, A. G. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.1197 · Cited by 2,256
Simple Chemical Transformation of Lignocellulosic Biomass into Furans for Fuels and Chemicals
Binder, J. B., & Raines, R. T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja808537j · Cited by 1,490
Recent Industrial Applications of Lignin: A Sustainable Alternative to Nonrenewable Materials
Lora, J. H., & Glasser, W. G. (2002) · Journal of Polymers and the Environment · doi:10.1023/a:1021070006895 · Cited by 1,176
Lignin – from natural adsorbent to activated carbon: A review
Suhas, Carrott, P. J. M., & Ribeiro Carrott, M. M. L. (2007) · Bioresource Technology · doi:10.1016/j.biortech.2006.08.008 · Cited by 1,062
Fabrication and Properties of Carbon Fibers
Huang, X. (2009) · Materials · doi:10.3390/ma2042369 · Cited by 969
A Review: Electrospinning of Biopolymer Nanofibers and their Applications
Schiffman, J. D., & Schauer, C. L. (2008) · Polymer Reviews · doi:10.1080/15583720802022182 · Cited by 820
Cited by
Lignin Valorization: Improving Lignin Processing in the Biorefinery
Ragauskas, A. J., Beckham, G. T., Biddy, M. J., Chandra, R., Chen, F., Davis, M. F., Davison, B. H., Dixon, R. A., Gilna, P., Keller, M., et al. (2014) · Science · doi:10.1126/science.1246843 · Cited by 4,125
Paving the Way for Lignin Valorisation: Recent Advances in Bioengineering, Biorefining and Catalysis
Rinaldi, R., Jastrzebski, R., Clough, M. T., Ralph, J., Kennema, M., Bruijnincx, P. C. A., & Weckhuysen, B. M. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201510351 · Cited by 2,138
Titirici, M.-M., White, R. J., Brun, N., Budarin, V. L., Su, D. S., del Monte, F., Clark, J. H., & MacLachlan, M. J. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00232f · Cited by 1,277
A concise review of current lignin production, applications, products and their environmental impact
Bajwa, D. S., Pourhashem, G., Ullah, A. H., & Bajwa, S. G. (2019) · Industrial Crops and Products · doi:10.1016/j.indcrop.2019.111526 · Cited by 1,270
Advanced lightweight materials for Automobiles: A review
Zhang, W., & Xu, J. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.110994 · Cited by 1,147
Carbon Fibers: Precursor Systems, Processing, Structure, and Properties
Frank, E., Steudle, L. M., Ingildeev, D., Spörl, J. M., & Buchmeiser, M. R. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201306129 · Cited by 970
Processing, structure, and properties of carbon fibers
Newcomb, B. A. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.10.018 · Cited by 779
A review on lignin-based polymeric, micro- and nano-structured materials
Duval, A., & Lawoko, M. (2014) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2014.09.017 · Cited by 733
A review on lignin structure, pretreatments, fermentation reactions and biorefinery potential
Ponnusamy, V. K., Nguyen, D. D., Dharmaraja, J., Shobana, S., Banu, J. R., Saratale, R. G., Chang, S. W., & Kumar, G. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2018.09.070 · Cited by 590
Thermochemical conversion of lignin to functional materials: a review and future directions
Liu, W.-J., Jiang, H., & Yu, H.-Q. (2015) · Green Chemistry · doi:10.1039/c5gc01054c · Cited by 571
Rani, M., Choudhary, P., Krishnan, V., & Zafar, S. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.108768 · Cited by 521
Lignin: Recent advances and emerging applications
Norgren, M., & Edlund, H. (2014) · Current Opinion in Colloid & Interface Science · doi:10.1016/j.cocis.2014.08.004 · Cited by 518
Wood-lignin: Supply, extraction processes and use as bio-based material
Tribot, A., Amer, G., Abdou Alio, M., de Baynast, H., Delattre, C., Pons, A., Mathias, J.-D., Callois, J.-M., Vial, C., Michaud, P., et al. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.01.007 · Cited by 394
Lignin as a potential source of high-added value compounds: A review
Zevallos Torres, L. A., Lorenci Woiciechowski, A., de Andrade Tanobe, V. O., Karp, S. G., Guimarães Lorenci, L. C., Faulds, C., & Soccol, C. R. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.121499 · Cited by 389
Recycling glass fiber thermoplastic composites from wind turbine blades
Cousins, D. S., Suzuki, Y., Murray, R. E., Samaniuk, J. R., & Stebner, A. P. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.10.286 · Cited by 383
Sustainable materials for electrochemical capacitors
Fic, K., Platek, A., Piwek, J., & Frackowiak, E. (2018) · Materials Today · doi:10.1016/j.mattod.2018.03.005 · Cited by 363
Lignin-derivatives based polymers, blends and composites: A review
Naseem, A., Tabasum, S., Zia, K. M., Zuber, M., Ali, M., & Noreen, A. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.08.030 · Cited by 343
Lignin‐Derived Advanced Carbon Materials
Chatterjee, S., & Saito, T. (2015) · ChemSusChem · doi:10.1002/cssc.201500692 · Cited by 333
Biomass Fractionation and Lignin Fractionation towards Lignin Valorization
Xu, J., Li, C., Dai, L., Xu, C., Zhong, Y., Yu, F., & Si, C. (2020) · ChemSusChem · doi:10.1002/cssc.202001491 · Cited by 317
Lignin‐Based Thermoplastic Materials
Wang, C., Kelley, S. S., & Venditti, R. A. (2016) · ChemSusChem · doi:10.1002/cssc.201501531 · Cited by 309
Kowalik, M., Ashraf, C., Damirchi, B., Akbarian, D., Rajabpour, S., & van Duin, A. C. T. (2019) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.9b04298 · Cited by 305
Fang, W., Yang, S., Wang, X.-L., Yuan, T.-Q., & Sun, R.-C. (2017) · Green Chemistry · doi:10.1039/c6gc03206k · Cited by 301
Transparent and haze wood composites for highly efficient broadband light management in solar cells
Zhu, M., Li, T., Davis, C. S., Yao, Y., Dai, J., Wang, Y., AlQatari, F., Gilman, J. W., & Hu, L. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.05.020 · Cited by 299
Grafting strategies for hydroxy groups of lignin for producing materials
Eraghi Kazzaz, A., Hosseinpour Feizi, Z., & Fatehi, P. (2019) · Green Chemistry · doi:10.1039/c9gc02598g · Cited by 294
Multifunctional lignin-based nanocomposites and nanohybrids
Lizundia, E., Sipponen, M. H., Greca, L. G., Balakshin, M., Tardy, B. L., Rojas, O. J., & Puglia, D. (2021) · Green Chemistry · doi:10.1039/d1gc01684a · Cited by 293
Wang, H.-M., Yuan, T.-Q., Song, G.-Y., & Sun, R.-C. (2021) · Green Chemistry · doi:10.1039/d1gc00790d · Cited by 292
The strength and stiffness of oriented wood and cellulose-fibre materials: A review
Jakob, M., Mahendran, A. R., Gindl-Altmutter, W., Bliem, P., Konnerth, J., Müller, U., & Veigel, S. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100916 · Cited by 292
Fungal Enzymes for Bio-Products from Sustainable and Waste Biomass
Gupta, V. K., Kubicek, C. P., Berrin, J.-G., Wilson, D. W., Couturier, M., Berlin, A., Filho, E. X. F., & Ezeji, T. (2016) · Trends in Biochemical Sciences · doi:10.1016/j.tibs.2016.04.006 · Cited by 287
Lignin-based carbon fibers: Formation, modification and potential applications
Wang, S., Bai, J., Innocent, M. T., Wang, Q., Xiang, H., Tang, J., & Zhu, M. (2022) · Green Energy & Environment · doi:10.1016/j.gee.2021.04.006 · Cited by 280
Enzymatic conversion of lignin into renewable chemicals
Bugg, T. D., & Rahmanpour, R. (2015) · Current Opinion in Chemical Biology · doi:10.1016/j.cbpa.2015.06.009 · Cited by 265
Catalytic Hydrogenolysis of Aryl Ethers: A Key Step in Lignin Valorization to Valuable Chemicals
Zaheer, M., & Kempe, R. (2015) · ACS Catalysis · doi:10.1021/cs501498f · Cited by 265
The current and emerging sources of technical lignins and their applications
Li, T., & Takkellapati, S. (2018) · Biofuels, Bioproducts and Biorefining · doi:10.1002/bbb.1913 · Cited by 264
Recent advances in fibre-hybrid composites: materials selection, opportunities and applications
Swolfs, Y., Verpoest, I., & Gorbatikh, L. (2019) · International Materials Reviews · doi:10.1080/09506608.2018.1467365 · Cited by 259
Structural and morphological changes in kraft lignin during hydrothermal carbonization
Wikberg, H., Ohra-aho, T., Pileidis, F., & Titirici, M.-M. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00925 · Cited by 175
Using green γ-valerolactone/water solvent to decrease lignin heterogeneity by gradient precipitation
Wang, G., Liu, X., Yang, B., Si, C., Parvez, A. M., Jang, J., & Ni, Y. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b01641 · Cited by 111
A Multitechnique Characterization of Lignin Softening and Pyrolysis
Shrestha, B., le Brech, Y., Ghislain, T., Leclerc, S., Carré, V., Aubriet, F., Hoppe, S., Marchal, P., Pontvianne, S., Brosse, N., et al. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b01130 · Cited by 108
Progress in application of the pyrolytic lignin from pyrolysis of biomass
Zhang, L., Zhang, S., Hu, X., & Gholizadeh, M. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.129560 · Cited by 77
Carbon Aerogels From Softwood Kraft Lignin for High Performance Supercapacitor Electrodes
Karaaslan, M. A., Lin, L.-T., Ko, F., & Renneckar, S. (2022) · Frontiers in Materials · doi:10.3389/fmats.2022.894061 · Cited by 51
Additive Manufacturing of Carbon Using Commodity Polypropylene
Smith, P., Obando, A. G., Griffin, A., Robertson, M., Bounds, E., & Qiang, Z. (2023) · Advanced Materials · doi:10.1002/adma.202208029 · Cited by 42
Dai, L., Hu, X., Zhao, C., Zhou, H., Zhang, Z., Wang, Y., Ma, S., Liu, X., Li, X., & Shu, X. (2024) · Waste Management · doi:10.1016/j.wasman.2024.09.002 · Cited by 16
Metadata
- Authors
- Baker, D. A., & Rials, T. G.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2013-04-26
- Volume
- 130
- Issue
- 2
- Pages
- 713-728
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2036401252
- Cited by
- 664
- References
- 69
- FWCI
- 24.27
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.