The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
The Indium−Lithium Electrode in Solid‐State Lithium‐Ion Batteries: Phase Formation, Redox Potentials, and Interface Stability
Abstract
Lithium solid‐state batteries (Li‐SSBs) require electrodes that provide a sufficiently stable interface with the solid electrolyte. Due to the often limited stability window of solid electrolytes, researchers frequently favor an In−Li alloy instead of lithium metal as counter electrode for two‐electrode measurements. Maintaining a stable potential at the counter electrode is especially important because three‐electrode measurements are hard to realize in solid‐state cells. Although a constant potential of about 0.6 V vs. Li+/Li is commonly accepted for the In−Li electrode, only little is known about the behavior of this electrode. Moreover, the In−Li phase diagram is complex containing several intermetallic phases/compounds such as the InLi phase, or line compounds such as In 4 Li 5 or In 2 Li 3. This means that the redox potential of the In−Li electrode depends on the alloy composition, i. e. the In/Li ratio. Here, we study the behavior of In−Li electrodes in cells with liquid electrolyte to determine their phase evolution and several equilibrium potentials vs. Li+/Li. The room temperature equilibrium redox potential of the In−Li electrode with the favored composition (or more precisely the Li+/(In−InLi) electrode) is 0.62 V vs. Li+/Li. We then discuss the use of In−Li electrodes in solid state cells using Li 3 PS 4 as solid electrolyte and give examples on the importance of the right In/Li ratio of the electrode. While the right In/Li ratio enables stable lithium insertion/deinsertion in symmetrical cells for at least 100 cycles, too much lithium in the electrode leads to a drop in redox potential combined with a rapid build‐up of interface resistance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
The Li-Ion Rechargeable Battery: A Perspective
Goodenough, J. B., & Park, K.-S. (2013) · Journal of the American Chemical Society · doi:10.1021/ja3091438 · Cited by 9,962
A lithium superionic conductor
Kamaya, N., Homma, K., Yamakawa, Y., Hirayama, M., Kanno, R., Yonemura, M., Kamiyama, T., Kato, Y., Hama, S., Kawamoto, K., et al. (2011) · Nature Materials · doi:10.1038/nmat3066 · Cited by 4,978
Zhu, Y., He, X., & Mo, Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b07517 · Cited by 1,936
Interface Stability in Solid-State Batteries
Richards, W. D., Miara, L. J., Wang, Y., Kim, J. C., & Ceder, G. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04082 · Cited by 1,652
Functional Materials for Rechargeable Batteries
Cheng, F., Liang, J., Tao, Z., & Chen, J. (2011) · Advanced Materials · doi:10.1002/adma.201003587 · Cited by 1,609
Design principles for solid-state lithium superionic conductors
Wang, Y., Richards, W. D., Ong, S. P., Miara, L. J., Kim, J. C., Mo, Y., & Ceder, G. (2015) · Nature Materials · doi:10.1038/nmat4369 · Cited by 1,485
New horizons for inorganic solid state ion conductors
Zhang, Z., Shao, Y., Lotsch, B., Hu, Y.-S., Li, H., Janek, J., Nazar, L. F., Nan, C.-W., Maier, J., Armand, M., et al. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01053f · Cited by 1,321
Seino, Y., Ota, T., Takada, K., Hayashi, A., & Tatsumisago, M. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee41655k · Cited by 1,302
Electrochemical Stability of Li10GeP2S12 and Li7La3Zr2O12 Solid Electrolytes
Han, F., Zhu, Y., He, X., Mo, Y., & Wang, C. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501590 · Cited by 1,095
On the use of vinylene carbonate (VC) as an additive to electrolyte solutions for Li-ion batteries
Aurbach, D., Gamolsky, K., Markovsky, B., Gofer, Y., Schmidt, M., & Heider, U. (2002) · Electrochimica Acta · doi:10.1016/s0013-4686(01)00858-1 · Cited by 992
Anomalous High Ionic Conductivity of Nanoporous β-Li3PS4
Liu, Z., Fu, W., Payzant, E. A., Yu, X., Wu, Z., Dudney, N. J., Kiggans, J., Hong, K., Rondinone, A. J., & Liang, C. (2013) · Journal of the American Chemical Society · doi:10.1021/ja3110895 · Cited by 879
Wenzel, S., Randau, S., Leichtweiß, T., Weber, D. A., Sann, J., Zeier, W. G., & Janek, J. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00610 · Cited by 854
Sulfide Solid Electrolytes for Lithium Battery Applications
Lau, J., DeBlock, R. H., Butts, D. M., Ashby, D. S., Choi, C. S., & Dunn, B. S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800933 · Cited by 678
High lithium ionic conductivity in the garnet-type oxide Li7−X La3(Zr2−X, NbX)O12 (X=0–2)
Ohta, S., Kobayashi, T., & Asaoka, T. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.11.089 · Cited by 665
Sakuda, A., Hayashi, A., & Tatsumisago, M. (2010) · Chemistry of Materials · doi:10.1021/cm901819c · Cited by 651
Zhang, W., Weber, D. A., Weigand, H., Arlt, T., Manke, I., Schröder, D., Koerver, R., Leichtweiss, T., Hartmann, P., Zeier, W. G., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b01137 · Cited by 538
Hartmann, P., Leichtweiss, T., Busche, M. R., Schneider, M., Reich, M., Sann, J., Adelhelm, P., & Janek, J. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp4051275 · Cited by 523
Self-citationWenzel, S., Weber, D. A., Leichtweiß, T., Busche, M. R., Sann, J., & Janek, J. (2015) · Solid State Ionics · doi:10.1016/j.ssi.2015.11.034 · Cited by 505
Interfacial Stability of Li Metal–Solid Electrolyte Elucidated via in Situ Electron Microscopy
Ma, C., Cheng, Y., Yin, K., Luo, J., Sharafi, A., Sakamoto, J., Li, J., More, K. L., Dudney, N. J., & Chi, M. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b03223 · Cited by 392
Dietrich, C., Weber, D. A., Sedlmaier, S. J., Indris, S., Culver, S. P., Walter, D., Janek, J., & Zeier, W. G. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta06067j · Cited by 338
Redox-active cathode interphases in solid-state batteries
Koerver, R., Walther, F., Aygün, I., Sann, J., Dietrich, C., Zeier, W. G., & Janek, J. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta07641j · Cited by 287
Tetragonal Li10GeP2S12 and Li7GePS8 – exploring the Li ion dynamics in LGPS Li electrolytes
Kuhn, A., Duppel, V., & Lotsch, B. V. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41728j · Cited by 284
Wenzel, S., Leichtweiss, T., Weber, D. A., Sann, J., Zeier, W. G., & Janek, J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b10119 · Cited by 275
Interface reactions between LiPON and lithium studied by in-situ X-ray photoemission
Schwöbel, A., Hausbrand, R., & Jaegermann, W. (2015) · Solid State Ionics · doi:10.1016/j.ssi.2014.10.017 · Cited by 267
Shin, D. O., Oh, K., Kim, K. M., Park, K., Lee, B., Lee, Y.-G., & Kang, K. (2015) · Scientific Reports · doi:10.1038/srep18053 · Cited by 205
Wang, C., Appleby, A. J., & Little, F. E. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00576-0 · Cited by 128
Webb, S. A., Baggetto, L., Bridges, C. A., & Veith, G. M. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.10.033 · Cited by 116
All-solid-state lithium-ion batteries with TiS 2 nanosheets and sulphide solid electrolytes
Oh, D. Y., Choi, Y. E., Kim, D. H., Lee, Y.-G., Kim, B., Park, J., Sohn, H., & Jung, Y. S. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta01628f · Cited by 112
The mechanism of electrointercalation
Bruce, P. G., & Saidi, M. Y. (1992) · Journal of Electroanalytical Chemistry · doi:10.1016/0022-0728(92)80069-g · Cited by 109
Cited by
Physicochemical Concepts of the Lithium Metal Anode in Solid-State Batteries
Krauskopf, T., Richter, F. H., Zeier, W. G., & Janek, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00431 · Cited by 892
Lu, Y., Zhao, C., Yuan, H., Cheng, X., Huang, J., & Zhang, Q. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202009925 · Cited by 562
Vadhva, P., Hu, J., Johnson, M. J., Stocker, R., Braglia, M., Brett, D. J. L., & Rettie, A. J. E. (2021) · ChemElectroChem · doi:10.1002/celc.202100108 · Cited by 531
The carrier transition from Li atoms to Li vacancies in solid-state lithium alloy anodes
Lu, Y., Zhao, C.-Z., Zhang, R., Yuan, H., Hou, L.-P., Fu, Z.-H., Chen, X., Huang, J.-Q., & Zhang, Q. (2021) · Science Advances · doi:10.1126/sciadv.abi5520 · Cited by 374
Riegger, L. M., Schlem, R., Sann, J., Zeier, W. G., & Janek, J. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202015238 · Cited by 344
Metadata
- Authors
- Santhosha, A. L., Medenbach, L., Buchheim, J. R., & Adelhelm, P.
- Venue
- Batteries & Supercaps
- Publisher
- Wiley
- Published
- 2019-03-26
- Volume
- 2
- Issue
- 6
- Pages
- 524-529
- ISSN
- 2566-6223 (ISSN-L)
- OpenAlex
- W2917158192
- Cited by
- 346
- References
- 30
- FWCI
- 11.46
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.