CoChat

Environmental impact assessment of energy crops cultivation in Europe

Fernando, Ana L, Duarte, Maria P, Almeida, Joana, Boléo, Sara, Mendes, Benilde · 2010 · Biofuels, Bioproducts and Biorefining
Cited by 116

The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.

Abstract

The production of energy crops must be studied and evaluated in terms of environmental impact, in order to integrate them into a sustainable agricultural development. As bioenergy carriers they offer ecological advantages over fossil fuels by contributing to the reduction of greenhouse gases and acidifying emissions. However, there could be ecological shortcomings related to the intensity of agricultural production. There is a risk of polluting water and air, losing soil quality, enhancing erosion, and reducing biodiversity. In the scope of the project Future Crops for Food, Feed, Fiber and Fuel (4F Crops), supported by the European Union, an environmental impact assessment study was developed and applied to the production of potential energy crops in Europe. The following variables were selected as categories: use of water and mineral resources, soil quality and erosion, emission of minerals and pesticides to soil and water, waste generation and utilization, landscape, and biodiversity. In addition, a normalization and weighting procedure was applied, which attempts to aggregate environmental impacts. Results suggest that growing energy crops does not inflict higher impact on the environment compared to potato and wheat farming (regarding the studied categories). Although the different indicators did not yield a common pattern, overall results suggest that woody and lignocellulosic crops have an advantage over annual crop systems, namely regarding erodibility and biodiversity. Some crop management options, such as pesticides and fertilizers inputs, can influence the outcomes. However, site‐specific factors should be accurately assessed to evaluate the adequacy between crop and location. Environmental hotspots in the systems are detected and options for improvement are presented. © 2010 Society of Chemical Industry and John Wiley & Sons, Ltd

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1002/bbb.249

Cites

9 of 9 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 9 references

Cited by

Metadata

Authors
Fernando, A. L., Duarte, M. P., Almeida, J., Boléo, S., & Mendes, B.
Venue
Biofuels, Bioproducts and Biorefining
Publisher
Wiley
Published
2010-11
Volume
4
Issue
6
Pages
594-604
ISSN
  • 1932-1031 (ISSN-L)
  • 1932-104X
OpenAlex
W2161765957
Cited by
116
References
9
FWCI
14.95
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.