Analysis of the Microstructure Formation Process and Its Influence on the Performance of Polymer Electrolyte Fuel-Cell Catalyst Layers
The DOI matches its Crossref record; 47 of the 48 references it cites were found in a registry or an index.
Abstract
To understand the formation process of the microstructure of the catalyst layer of a polymer electrolyte fuel cell (PEFC), we tried to observe the “real” structure of the catalyst ink by cryogenic scanning electron microscopy (cryo‐SEM). Catalyst inks with different water/alcohol compositions were successfully visualized, and they correlated well with the particle‐size distribution obtained by laser diffraction of the ink and the structures of the catalyst layers obtained by typical SEM. On the basis of other electrochemical characterization results, including current–voltage performance, oxygen reduction reaction kinetics, and mass‐transport properties, the microstructures of the catalyst inks and the catalyst layers were proposed. The proposed microstructures can explain the relationship between the catalyst materials and the performance of the cathode catalyst layer of the membrane electrode assembly through its formation and apparent properties. It was also found that the microstructure of the catalyst ink plays an important role in performance.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“For example, hydrophobic carbon tends to form large agglomerates in the polar solvent, e.g., water/alcohol mixed solvent, due to hydrophobic interaction [25]”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [25]
In the citing paper
“It was believed that the colloid ionomer with fine dispersion or specific size adsorbs on catalyst agglomerates, resulting in the formation of the slightly larger agglomerates, which improves the CL microstructure and enhances the porosity and then the gas transport, further the fuel cell performance [23,25,132,138,139].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [25]
In the citing paper
“The morphology, size, and conformation of the ionomer agglomerates dispersed will differ with the water fraction or the type of alcohol, altering the CLs' structure and their performance [25,30,32,49,57,131,137,140].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [25]
In the citing paper
“For example, if using dipropylene glycol (DPG)/1-propyl alcohol (NPA) and water mixtures as the solvent, the ionomer agglomerates with moderate size close to that of Pt/C agglomerates in the catalyst ink not only form a connected ionomer network, but also maintain the adequate porosity in CL [23,25], offering an improved PEM fuel cells performance.”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [25]
Citations
Cites
Highly Crystalline Multimetallic Nanoframes with Three-Dimensional Electrocatalytic Surfaces
Chen, C., Kang, Y., Huo, Z., Zhu, Z., Huang, W., Xin, H. L., Snyder, J. D., Li, D., Herron, J. A., Mavrikakis, M., et al. (2014) · Science · doi:10.1126/science.1249061 · Cited by 2,765
Makharia, R., Mathias, M. F., & Baker, D. R. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1888367 · Cited by 514
Analysis of Oxygen-Transport Diffusion Resistance in Proton-Exchange-Membrane Fuel Cells
Nonoyama, N., Okazaki, S., Weber, A. Z., Ikogi, Y., & Yoshida, T. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3546038 · Cited by 512
Impact of Platinum Loading and Catalyst Layer Structure on PEMFC Performance
Owejan, J. P., Owejan, J. E., & Gu, W. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.072308jes · Cited by 423
Water Management in Cathode Catalyst Layers of PEM Fuel Cells
Eikerling, M. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2160435 · Cited by 295
Liu, Y., Murphy, M. W., Baker, D. R., Gu, W., Ji, C., Jorne, J., & Gasteiger, H. A. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3143965 · Cited by 290
New Preparation Method for Polymer‐Electrolyte Fuel Cells
Uchida, M., Aoyama, Y., Eda, N., & Ohta, A. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2044068 · Cited by 282
Lefebvre, M. C. (1999) · Electrochemical and Solid-State Letters · doi:10.1149/1.1390804 · Cited by 278
Ngo, T. T., Yu, T. L., & Lin, H.-L. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.055 · Cited by 231
Subbaraman, R., Strmcnik, D., Stamenkovic, V., & Markovic, N. M. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp100814x · Cited by 217
Research works printed but not linked: 2
- 10.5796/electrochemistry.81.641 · doi:10.5796/electrochemistry.81.641
- K. L. More Characterization of Fuel Cell Materials Proceeding of 2014 DOE Annual Merit Review June2014 Washington DC.
Cited by
Items 101–148 of 148
Choi, W.-J., Kang, I., Yu, D. M., Yoon, S. J., So, S., & Oh, K. (2024) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-024-00221-2 · Cited by 10
Hamlyn, R. C. E., Mahl, J., Zhang, X., English, D., McAfee, T. R., & Crumlin, E. J. (2025) · Journal of Materials Chemistry A · doi:10.1039/d4ta07085b · Cited by 8
Yoshimune, W., Harada, M., & Akimoto, Y. (2020) · Composites Part C Open Access · doi:10.1016/j.jcomc.2020.100015 · Cited by 10
Design of Interfaces and Phase Interfaces on Cathode Catalysts for Polymer Electrolyte Fuel Cells
Inoue, G., & Takenaka, S. (2020) · Chemistry Letters · doi:10.1246/cl.200649 · Cited by 9
Li, D., Niu, K., Yang, R., Haeverbeke, M. V., Zhang, Y., Shi, W., Yang, Y., Zhang, J., & Wang, Y. (2025) · Energy & Fuels · doi:10.1021/acs.energyfuels.4c05453 · Cited by 8
Zimmerer, N., Quarz, P., Terhorst, E., Janning, L., Scharfer, P., & Schabel, W. (2025) · Energy Technology · doi:10.1002/ente.202500516 · Cited by 7
Microstructural observation of the swollen catalyst layers of fuel cells by cryo-TEM
Shimanuki, J., Imai, H., Ito, Y., Nishino, Y., & Miyazawa, A. (2022) · Microscopy · doi:10.1093/jmicro/dfac059 · Cited by 8
Dowd, R. P., Li, Y., & Nguyen, T. V. (2020) · Journal of Applied Electrochemistry · doi:10.1007/s10800-020-01453-w · Cited by 7
Stoll, J., Jeong, J., Huynh, P., & Kjeang, E. (2024) · Journal of the Electrochemical Society · doi:10.1149/1945-7111/ad4c11 · Cited by 6
Su, Y., Yuan, S., Li, J., Feng, Y., Shen, S., Yan, X., & Zhang, J. (2026) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2025.116163 · Cited by 6
Guo, Y., Mabuchi, T., Li, G., & Tokumasu, T. (2023) · Surfaces and Interfaces · doi:10.1016/j.surfin.2023.103731 · Cited by 6
Quantity of saturated adsorbed ionomers on Pt surface in proton exchange membrane fuel cells
Wang, Y., Zhou, F., Tao, J., Tan, J., & Pan, M. (2024) · Journal of Catalysis · doi:10.1016/j.jcat.2024.115404 · Cited by 6
Zimmerer, N., Quarz, P., Janning, L., Scharfer, P., & Schabel, W. (2025) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2025.138807 · Cited by 6
Kim, D., Sun, R., & Elabd, Y. A. (2024) · Fuel Cells · doi:10.1002/fuce.202400069 · Cited by 4
Lu, C., Zhuang, H., Huang, X., Zhang, L., & Xu, H. (2026) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2026.103451 · Cited by 4
Quarz, P., Zimmerer, N., Janning, L., Steck, A., Scharfer, P., & Schabel, W. (2025) · Energy Technology · doi:10.1002/ente.202501844 · Cited by 4
Kameya, Y., Iriguchi, N., Yoshida, T., Sasabe, T., & Hirai, S. (2018) · Colloid & Polymer Science · doi:10.1007/s00396-018-4400-1 · Cited by 5
Reaction Products Affecting the PEFC Catalyst Ink Property
Uemura, S., Sasabe, T., Sakai, K., Matsumoto, H., Sugimori, H., Shinohara, K., & Hirai, S. (2021) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac2684 · Cited by 4
Ohma, A., Arihara, K., Mashio, T., Ito, Y., Nishino, Y., & Miyazawa, A. (2024) · International Journal of Electrochemical Science · doi:10.1016/j.ijoes.2024.100539 · Cited by 4
Self-citationA Comparative Study of Alternative Polymer Binders for the Hydrogen Evolution Reaction
le Roux, W. H., Pfukwa, R., Weigand, J. J., & Falch, A. (2025) · Electrocatalysis · doi:10.1007/s12678-025-00976-0 · Cited by 3
Enhancing photoelectrochemical CO2 reduction with CuBi2O4-cellulose nanofiber hybrid photocathodes
Cho, A. Y., Yoon, J. H., Lee, S., Yun, H., Ma, J., Park, J., Kim, S. Y., lee, J., & Choi, T. (2026) · Cellulose · doi:10.1007/s10570-026-06947-y · Cited by 4
“Common polymeric binders such as Nafion can lead to catalyst agglomeration, reduce the number of exposed active sites, and impair overall reaction efficiency (Chen et al. 2018; Jayakumar et al. 2021; Passalacque et al. 2001; Takahashi et al. 2015).”
Yoshino, S., Harada, M., Hasegawa, N., Yomo, S., Koiwai, A., Minami, S., Yamakawa, S., & Jinnouchi, R. (2026) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5c17388 · Cited by 3
Su, Y., Yan, C., Zhao, C., Wang, E., Yin, J., Shen, S., Yan, X., & Zhang, J. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.173503 · Cited by 3
Koga, M., Matsumoto, H., Kunishima, M., Tokita, M., Masunaga, H., Ohta, N., Takeuchi, A., Mizukado, J., Sugimori, H., Shinohara, K., et al. (2021) · Membranes · doi:10.3390/membranes11070466 · Cited by 3
“We investigated the ionomer/catalyst microstructures in the CLs of PEFCs using synchrotron X-ray scattering techniques and TEM.”
MethodInfluentialGong, Z., Feng, Z., Tao, L., Chao, W., Chang, Z., & Zhao, P. (2025) · Fuel Cells · doi:10.1002/fuce.70015 · Cited by 2
“The coverage rate results of the CLs made using Schemes 6, 11, 12, and 13 are displayed in Figure 6f with red line.”
Lan, D., Xu, Q., Wang, X., & Gao, H. (2025) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2025.138262 · Cited by 2
Yomo, S., Yoshino, S., Hasegawa, N., Harada, M., & Yamakawa, S. (2025) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ae2261 · Cited by 2
Liao, K., Watanabe, T., Kumar, M., Thakur, N., Arao, M., Matsumoto, M., Imai, H., & Uchimoto, Y. (2025) · ACS Applied Nano Materials · doi:10.1021/acsanm.5c04281 · Cited by 2
Ripa, M. S., Jörissen, L., Hölzle, M., & Brimaud, S. (2025) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/add9d6 · Cited by 2
Performance Study of Direct Ammonia Fuel Cell Based on PtIr/C Anode Electrocatalyst
Chen, R., Zheng, S., Lin, Z., Liu, Y.-Q., & Wang, Z. (2021) · 化学学报 · doi:10.6023/a21060280 · Cited by 2
Surficial Functionalization of Monolithic Carbon Electrode via Femtosecond Laser Treatment
Ding, Y., Gimpel, T. L., Klyushin, A. Y., Tigges, S., Dang, Y., Poschmann, M., Song, F., Schlögl, R., & Heumann, S. (2025) · ChemElectroChem · doi:10.1002/celc.202500189 · Cited by 1
Takeshita, K., Wijakmatee, T., Matsumoto, H., Yoshikawa, S., & Saito, T. (2026) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2026.139952 · Cited by 1
Itota, B. J., Chowdhury, M. R., Barron, O., & Chamier, J. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2021.12.060 · Cited by 1
Talukdar, K. (2020) · elib (German Aerospace Center) · doi:10.18419/opus-11272 · Cited by 3
Materials and interfaces for electrocatalytic hydrogen production and utilization.
Gupta, A. R. (2022) · ThinkIR: The University of Louisville's Institutional Repository (University of Louisville) · doi:10.18297/etd/3864
The Role of Dispersion Solvent Composition in Pemfc Electrodes: Performance and Durability InsightsPreprint
Luo, S., Li, G., Zang, Z., Li, X., Wang, Q., Wang, Q., Xu, T., Xing, D., & Yi, B. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5081104
Lee, F. C. (2023) · White Rose eTheses Online (University of Leeds, The University of Sheffield, University of York)
Dato, V., Camarillo, R., Martínez, F., Rincón, J., & Jiménez, C. (2026) · Catalysts · doi:10.3390/catal16020133
Coudray, M. (2019) · theses.fr (ABES) · doi:10.70675/c7a6cb06z44a0z4237z89ecz0393194c5439 · Cited by 2
Study on the Regulation of the Three-Phase Microenvironment in Low-Platinum MEA
Li, X., Cai, X., & Lin, R. (2026) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2026-01-0443 · Cited by 1
Maloum, M. E. M. A. (2023) · theses.fr (ABES) · doi:10.70675/eedb5ef0z30ddz4fedzac17z491d540a28eb
Murugaiah, D. K., Islam, M. N., Stewart-Thomas, K., Eastcott, J. I., Dhawan, H., & Shahgaldi, S. (2026) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2026.140463
Hirai, T., Nakayama, S., Kuo, A.-T., Miyajima, T., Hommura, S., Tamoto, K., & Uchida, M. (2026) · Journal of Power Sources · doi:10.1016/j.jpowsour.2026.240767
Quarz, P. (2026) · Repository KITopen (Karlsruhe Institute of Technology) · doi:10.5445/ir/1000195965
Zhou, J., Su, Y., You, J., Ye, S., Liu, J., Wang, C., Zhang, Z., Yan, X., Wei, G., & Zhang, J. (2026) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2026.142090
Probing ionomer distribution in PEMFC catalyst layers: AFM and DEM enabled microstructure analysisPreprint
Vijayaraghavan, S. B., Lill, B., Bhutia, P. T., Renner, T., Grcic, S., Baldofski, M., & Franco, A. A. (2026) · ChemRxiv · doi:10.26434/chemrxiv.15011232/v1
Metadata
- Authors
- Takahashi, S., Mashio, T., Horibe, N., Akizuki, K., & Ohma, A.
- Affiliations
- Nissan (Japan) (JP)
- Corresponding author
- Ohma, Atsushi
- ORCID
- Horibe, Norifumi
- Venue
- ChemElectroChem
- Publisher
- Wiley
- Published
- 2015-07-14
- Volume
- 2
- Issue
- 10
- Pages
- 1560-1567
- ISSN
- 2196-0216 (ISSN-L)
- OpenAlex
- W2123109551
- Cited by
- 143
- References
- 48
- Citations by year
- 2026: 10 · 2025: 16 · 2024: 18 · 2023: 9 · 2022: 17 · 2021: 22 · 2020: 13 · 2019: 13 · 2018: 7 · 2017: 10 · 2016: 8
- FWCI
- 4.02
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- ChemElectroChem (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Materials Science › Materials Chemistry › Advancements in Solid Oxide Fuel Cells
- Keywords
- proton exchange membrane fuel cells, catalyst layer microstructure, catalyst ink, cryo-SEM, particle size distribution, oxygen reduction kinetics, mass transfer, cathode catalyst layer, membrane electrode assembly, fuel cell performance
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.