Analysis of the Microstructure Formation Process and Its Influence on the Performance of Polymer Electrolyte Fuel-Cell Catalyst Layers
The DOI matches its Crossref record; 47 of the 48 references it cites were found in a registry or an index.
Abstract
To understand the formation process of the microstructure of the catalyst layer of a polymer electrolyte fuel cell (PEFC), we tried to observe the “real” structure of the catalyst ink by cryogenic scanning electron microscopy (cryo‐SEM). Catalyst inks with different water/alcohol compositions were successfully visualized, and they correlated well with the particle‐size distribution obtained by laser diffraction of the ink and the structures of the catalyst layers obtained by typical SEM. On the basis of other electrochemical characterization results, including current–voltage performance, oxygen reduction reaction kinetics, and mass‐transport properties, the microstructures of the catalyst inks and the catalyst layers were proposed. The proposed microstructures can explain the relationship between the catalyst materials and the performance of the cathode catalyst layer of the membrane electrode assembly through its formation and apparent properties. It was also found that the microstructure of the catalyst ink plays an important role in performance.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“For example, hydrophobic carbon tends to form large agglomerates in the polar solvent, e.g., water/alcohol mixed solvent, due to hydrophobic interaction [25]”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [25]
In the citing paper
“It was believed that the colloid ionomer with fine dispersion or specific size adsorbs on catalyst agglomerates, resulting in the formation of the slightly larger agglomerates, which improves the CL microstructure and enhances the porosity and then the gas transport, further the fuel cell performance [23,25,132,138,139].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [25]
In the citing paper
“The morphology, size, and conformation of the ionomer agglomerates dispersed will differ with the water fraction or the type of alcohol, altering the CLs' structure and their performance [25,30,32,49,57,131,137,140].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [25]
In the citing paper
“For example, if using dipropylene glycol (DPG)/1-propyl alcohol (NPA) and water mixtures as the solvent, the ionomer agglomerates with moderate size close to that of Pt/C agglomerates in the catalyst ink not only form a connected ionomer network, but also maintain the adequate porosity in CL [23,25], offering an improved PEM fuel cells performance.”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [25]
Citations
Cites
Highly Crystalline Multimetallic Nanoframes with Three-Dimensional Electrocatalytic Surfaces
Chen, C., Kang, Y., Huo, Z., Zhu, Z., Huang, W., Xin, H. L., Snyder, J. D., Li, D., Herron, J. A., Mavrikakis, M., et al. (2014) · Science · doi:10.1126/science.1249061 · Cited by 2,765
Makharia, R., Mathias, M. F., & Baker, D. R. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1888367 · Cited by 514
Analysis of Oxygen-Transport Diffusion Resistance in Proton-Exchange-Membrane Fuel Cells
Nonoyama, N., Okazaki, S., Weber, A. Z., Ikogi, Y., & Yoshida, T. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3546038 · Cited by 512
Impact of Platinum Loading and Catalyst Layer Structure on PEMFC Performance
Owejan, J. P., Owejan, J. E., & Gu, W. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.072308jes · Cited by 423
Water Management in Cathode Catalyst Layers of PEM Fuel Cells
Eikerling, M. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2160435 · Cited by 295
Liu, Y., Murphy, M. W., Baker, D. R., Gu, W., Ji, C., Jorne, J., & Gasteiger, H. A. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3143965 · Cited by 290
New Preparation Method for Polymer‐Electrolyte Fuel Cells
Uchida, M., Aoyama, Y., Eda, N., & Ohta, A. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2044068 · Cited by 282
Lefebvre, M. C. (1999) · Electrochemical and Solid-State Letters · doi:10.1149/1.1390804 · Cited by 278
Ngo, T. T., Yu, T. L., & Lin, H.-L. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.055 · Cited by 231
Subbaraman, R., Strmcnik, D., Stamenkovic, V., & Markovic, N. M. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp100814x · Cited by 217
Research works printed but not linked: 2
- 10.5796/electrochemistry.81.641 · doi:10.5796/electrochemistry.81.641
- K. L. More Characterization of Fuel Cell Materials Proceeding of 2014 DOE Annual Merit Review June2014 Washington DC.
Cited by
Suter, T. A. M., Smith, K., Hack, J., Rasha, L., Rana, Z., Angel, G. M. A., Shearing, P. R., Miller, T. S., & Brett, D. J. L. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202101025 · Cited by 245
Hou, J., Yang, M., Ke, C., Wei, G., Priest, C., Qiao, Z., Wu, G., & Zhang, J. (2020) · EnergyChem · doi:10.1016/j.enchem.2019.100023 · Cited by 246
Chen, M., Zhao, C., Sun, F., Fan, J., Li, H., & Wang, H. (2020) · eTransportation · doi:10.1016/j.etran.2020.100075 · Cited by 212
The Controllable Design of Catalyst Inks to Enhance PEMFC Performance: A Review
Guo, Y., Pan, F., Chen, W., Ding, Z., Yang, D., Li, B., Ming, P., & Zhang, C. (2021) · Electrochemical Energy Reviews · doi:10.1007/s41918-020-00083-2 · Cited by 175
“[157] reported that increases in the ratio of water to alcohol in NPA/water binary mixtures led to increase in agglomerate size and separation between ionomers and agglomerates (Fig.”
BackgroundJaiser, S., Kumberg, J., Klaver, J., Urai, J. L., Schabel, W., Schmatz, J., & Scharfer, P. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.01.117 · Cited by 167
Rheological Investigation on the Microstructure of Fuel Cell Catalyst Inks
Khandavalli, S., Park, J. H., Kariuki, N. N., Myers, D. J., Stickel, J. J., Hurst, K., Neyerlin, K. C., Ulsh, M., & Mauger, S. A. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b15039 · Cited by 153
Van Cleve, T., Khandavalli, S., Chowdhury, A., Medina, S., Pylypenko, S., Wang, M., More, K. L., Kariuki, N., Myers, D. J., Weber, A. Z., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b17614 · Cited by 148
PEFC catalyst layer: Recent advances in materials, microstructural characterization, and modeling
Karan, K. (2017) · Current Opinion in Electrochemistry · doi:10.1016/j.coelec.2017.08.018 · Cited by 142
Inoue, G., Yokoyama, K., Ooyama, J., Terao, T., Tokunaga, T., Kubo, N., & Kawase, M. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.07.107 · Cited by 127
Yan, X., Xu, Z., Yuan, S., Han, A., Shen, Y., Cheng, X., Liang, Y., Shen, S., & Zhang, J. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.231523 · Cited by 131
Inoue, G., & Kawase, M. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.07.037 · Cited by 140
Cetinbas, F. C., Ahluwalia, R., Kariuki, N. N., Andrade, V. D., Fongalland, D., Smith, L., Sharman, J. D. B., Ferreira, P. J., Rasouli, S., & Myers, D. J. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.01.104 · Cited by 102
Balu, R., Choudhury, N. R., Mata, J. P., de Campo, L., Rehm, C., Hill, A. J., & Dutta, N. K. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b20645 · Cited by 96
Ishikawa, H., Sugawara, Y., Inoue, G., & Kawase, M. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.11.026 · Cited by 102
Understanding inks for porous-electrode formation
Hatzell, K. B., Dixit, M. B., Berlinger, S. A., & Weber, A. Z. (2017) · J. Mater. Chem. A · doi:10.1039/c7ta07255d · Cited by 97
Woo, S., Lee, S., Taning, A. Z., Yang, T., Park, S., & Yim, S. (2020) · Current Opinion in Electrochemistry · doi:10.1016/j.coelec.2020.03.006 · Cited by 97
Impact of Catalyst Ink Dispersing Solvent on PEM Fuel Cell Performance and Durability
Lei, C., Yang, F., Macauley, N., Spinetta, M., Purdy, G., Jankovic, J., Cullen, D. A., More, K. L., Kim, Y. S., & Xu, H. (2021) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/abf2b0 · Cited by 93
Liu, H., Ney, L., Zamel, N., & Li, X. (2022) · Applied Sciences · doi:10.3390/app12083776 · Cited by 85
“, water/alcohol mixed solvent, due to hydrophobic interaction [25]; in contrast, increasing the hydrophilicity of carbon through introducing plenty of functional groups tends to form small agglomerates in polar solvents due to an enhanced repulsion force [51].”
BackgroundMethodInfluentialMolecular Dynamics Study of Ionomer Adsorption at a Carbon Surface in Catalyst Ink
Mashio, T., Ohma, A., & Tokumasu, T. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.04.004 · Cited by 84
Self-citationDispersion-Solvent Control of Ionomer Aggregation in a Polymer Electrolyte Membrane Fuel Cell
Lee, J. H., Doo, G., Kwon, S. H., Choi, S., Kim, H.-T., & Lee, S. G. (2018) · Scientific Reports · doi:10.1038/s41598-018-28779-y · Cited by 74
Sharma, R., & Andersen, S. M. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b14622 · Cited by 73
Suzuki, T., Tanaka, H., Hayase, M., Tsushima, S., & Hirai, S. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.09.078 · Cited by 72
Gong, Q., Li, C., Liu, Y., Ilavsky, J., Guo, F., Cheng, X., & Xie, J. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c06711 · Cited by 72
Takahashi, S., Shimanuki, J., Mashio, T., Ohma, A., Tohma, H., Ishihara, A., Ito, Y., Nishino, Y., & Miyazawa, A. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.12.068 · Cited by 76
Self-citationCreel, E. B., Tjiptowidjojo, K., Alex Lee, J., Livingston, K. M., Randall Schunk, P., Bell, N. S., Serov, A., & Wood III, D. L. (2022) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2021.11.047 · Cited by 67
Van Cleve, T., Wang, G., Mooney, M., Cetinbas, C. F., Kariuki, N., Park, J., Farghaly, A., Myers, D., & Neyerlin, K. C. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228889 · Cited by 66
Preparation of PEMFC Electrodes from Milligram-Amounts of Catalyst Powder
Yarlagadda, V., McKinney, S. E., Keary, C. L., Thompson, L. T., Zulevi, B., & Kongkanand, A. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1461707jes · Cited by 69
Cheng, X., Shen, S., Wei, G., Wang, C., Luo, L., & Zhang, J. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202200228 · Cited by 63
Chung, S., Shin, D., Choun, M., Kim, J., Yang, S., Choi, M., Kim, J. W., & Lee, J. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.07.126 · Cited by 63
Inoue, G., Ohnishi, T., So, M., Park, K., Ono, M., & Tsuge, Y. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.227060 · Cited by 63
Influence of ionomer adsorption on agglomerate structures in high-solid catalyst inks
Kumano, N., Kudo, K., Akimoto, Y., Ishii, M., & Nakamura, H. (2020) · Carbon · doi:10.1016/j.carbon.2020.07.047 · Cited by 61
Chen, R., Zheng, S., Yao, Y., Lin, Z., Ouyang, W., Zhuo, L., & Wang, Z. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2021.06.001 · Cited by 59
So, M., Ohnishi, T., Park, K., Ono, M., Tsuge, Y., & Inoue, G. (2019) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2019.09.012 · Cited by 58
Inoue, G., & Kawase, M. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.08.029 · Cited by 64
Modeling of local gas transport in catalyst layers of PEM fuel cells
Mashio, T., Iden, H., Ohma, A., & Tokumasu, T. (2017) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2017.02.045 · Cited by 61
Self-citationHarada, M., Takata, S.-I., Iwase, H., Kajiya, S., Kadoura, H., & Kanaya, T. (2021) · ACS Omega · doi:10.1021/acsomega.1c01535 · Cited by 57
Murugaiah, D. K., & Shahgaldi, S. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.04.036 · Cited by 60
Hasegawa, N., Kamiya, A., Matsunaga, T., Kitano, N., & Harada, M. (2021) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2021.127153 · Cited by 54
Olbrich, W., Kadyk, T., Sauter, U., & Eikerling, M. H. (2022) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac6e8b · Cited by 56
Braaten, J. P., Kariuki, N. N., Myers, D. J., Blackburn, S., Brown, G., Park, A., & Litster, S. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.230821 · Cited by 53
Yoshimune, W., & Harada, M. (2019) · Chemistry Letters · doi:10.1246/cl.190017 · Cited by 51
Talukdar, K., Ripan, M. A., Jahnke, T., Gazdzicki, P., Morawietz, T., & Friedrich, K. A. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228169 · Cited by 45
Liu, G., McLaughlin, D., Thiele, S., & Pham, C. V. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.141757 · Cited by 46
Impact of Nonadsorbed Ionomer on Viscosity of Catalyst Inks for Polymer Electrolyte Fuel Cells
Yoshimune, W., & Harada, M. (2020) · Bulletin of the Chemical Society of Japan · doi:10.1246/bcsj.20190321 · Cited by 44
Ding, R. F., Yin, W., Cheng, G., Chen, Y., Wang, J., Wang, X., Han, M. S., Zhang, T., Cao, Y., Zhao, H., et al. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c23221 · Cited by 41
Chen, Y., Zhong, Q. D., Li, G., Tian, T., Tan, J., & Pan, M. (2018) · Ionics · doi:10.1007/s11581-018-2533-3 · Cited by 42
On the state and stability of fuel cell catalyst inks
Bapat, S., Giehl, C., Kohsakowski, S., Peinecke, V., Schäffler, M., & Segets, D. (2021) · Advanced Powder Technology · doi:10.1016/j.apt.2021.08.030 · Cited by 38
Sun, F., Di, Q., Chen, M., Liu, H., & Wang, H. (2024) · eTransportation · doi:10.1016/j.etran.2024.100327 · Cited by 40
Mehrazi, S., Sarker, M., Mojica, F., Rolfe, P., & Chuang, P. A. (2021) · Electrochimica Acta · doi:10.1016/j.electacta.2021.138690 · Cited by 35
Wu, D., Kayo, N., Jayawickrama, S. M., Phua, Y. K., Tanaka, N., & Fujigaya, T. (2022) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2022.11.116 · Cited by 35
Wang, H., Lin, R., Cai, X. L., Liu, S., Zhong, D., & Hao, Z. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2021.121615 · Cited by 33
Microstructure and macroscopic rheology of microporous layer nanoinks for PEM fuel cells
Pan, W., Chen, Z., Yao, D., Chen, X., Wang, F., & Dai, G. (2021) · Chemical Engineering Science · doi:10.1016/j.ces.2021.117001 · Cited by 33
Degradation of Platinum-Cobalt Alloy PEMFC Cathode Catalysts in Catalyst-Ionomer Inks
Myers, D. J., Kropf, A. J., Wegener, E. C., Mistry, H., Kariuki, N., & Park, J. (2021) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/abf4ab · Cited by 32
Woo, S. H., Kim, S., Woo, S., Park, S., Kang, Y. S., Jung, N., & Yim, S. (2023) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-023-1474-3 · Cited by 34
Proton-Exchange Membrane Fuel Cells with Low-Pt Content
Kongkanand, A., Gu, W., & Mathias, M. F. (2018) · Springer eBooks · doi:10.1007/978-1-4939-7789-5_1022 · Cited by 35
Sharma, R., Gyergyek, S., Lund, P. B., & Andersen, S. M. (2021) · ACS Applied Energy Materials · doi:10.1021/acsaem.1c00964 · Cited by 32
Du, Y. P., Li, Y., Ren, P., Zhang, L., Wang, D., & Xu, X. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.153021 · Cited by 33
Modeling of wetting phenomena in cathode catalyst layers for PEM fuel cells
Olbrich, W., Kadyk, T., Sauter, U., & Eikerling, M. H. (2022) · Electrochimica Acta · doi:10.1016/j.electacta.2022.140850 · Cited by 30
Investigation on the reaction area of PEMFC at different position in multiple catalyst layer
Li, W., Lin, R., & Yang, Y. (2019) · Electrochimica Acta · doi:10.1016/j.electacta.2019.02.003 · Cited by 30
Yoshino, S., Harada, M., Hasegawa, N., & Jinnouchi, R. (2024) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2024.133847 · Cited by 30
Osmieri, L., Mauger, S. A., Ulsh, M., Neyerlin, K. C., & Bender, G. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.227829 · Cited by 31
Mehrazi, S., Homayouni, T., Kakati, N., Sarker, M., Rolfe, P., & Chuang, P. A. (2024) · Applied Energy · doi:10.1016/j.apenergy.2024.122680 · Cited by 28
Park, K., Ohnishi, T., Goto, M., So, M., Takenaka, S., Tsuge, Y., & Inoue, G. (2019) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2019.11.097 · Cited by 29
A Particle Based Ionomer Attachment Model for a Fuel Cell Catalyst Layer
So, M., Park, K., Tsuge, Y., & Inoue, G. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab68d4 · Cited by 28
Kikkawa, N., & Jinnouchi, R. (2022) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.2c03845 · Cited by 27
Crack evolution during the film drying process of fuel cell microporous layer ink
Chen, Z., Pan, W., Yao, D., Gao, M. X., Gao, Y., Chen, X., Krzywański, J., & Wang, F. (2022) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2022.129283 · Cited by 26
Regulating catalyst and ionomer interactions to promote oxygen transport in fuel cells
Wang, M., Zhang, S., Wang, H., Sun, E., Liu, D., Wu, M., Liu, D., & Li, Z. (2024) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2024.124894 · Cited by 33
Molecular engineering of a π-conjugated polymer film of the azo dye Bismarck Brown Y
Teixeira, M. F. S., Barsan, M. M., & Brett, C. M. A. (2016) · RSC Advances · doi:10.1039/c6ra20335c · Cited by 24
Inoue, G., Park, K., So, M., Kimura, N., & Tsuge, Y. (2022) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2022.02.021 · Cited by 25
Temperature-induced shear-thinning in catalyst inks
Yoshimune, W., & Harada, M. (2021) · Electrochemistry Communications · doi:10.1016/j.elecom.2021.107099 · Cited by 22
Microstructural observation of fuel cell catalyst inks by Cryo-SEM and Cryo-TEM
Shimanuki, J., Takahashi, S., Tohma, H., Ohma, A., Ishihara, A., Ito, Y., Nishino, Y., & Miyazawa, A. (2017) · Journal of Electron Microscopy · doi:10.1093/jmicro/dfx001 · Cited by 23
Self-citationPark, J.-H., Kim, B. S., & Park, J. (2022) · Electrochimica Acta · doi:10.1016/j.electacta.2022.140680 · Cited by 22
Lee, S., Woo, S. H., Pak, B., Kim, S., Kang, Y. S., Woo, S., Park, S., Yang, T.-H., & Yim, S. (2023) · Journal of Power Sources · doi:10.1016/j.jpowsour.2023.233644 · Cited by 21
Su, Y., Cheng, X., Feng, Y., Li, H., Yan, C., He, M., Luo, L., Shen, S., Yan, X., & Zhang, J. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.234453 · Cited by 22
So, M., Park, K., Ohnishi, T., Ono, M., Tsuge, Y., & Inoue, G. (2019) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2019.10.005 · Cited by 22
Porous Carbon Supports for Low-Pt Proton-Exchange Membrane Fuel Cells
You, J., Hu, J., Zheng, Z., Li, H., Luo, L., Cheng, X., Yan, X., Shen, S., & Zhang, J. (2025) · Electrochemical Energy Reviews · doi:10.1007/s41918-025-00259-8 · Cited by 20
Huang, K., Morales‐Collazo, O., Chen, Z., Song, T. M., Wang, L., Lin, H., Brennecke, J. F., & Jia, H. (2021) · Catalysts · doi:10.3390/catal11080989 · Cited by 21
Punyawudho, K., Pugalenthi, M. R., Shu, X., Kaneco, S., Wongwuttanasatian, T., Suksri, A., & Payattikul, L. (2024) · International Journal of Energy Research · doi:10.1155/er/9529659 · Cited by 18
Taning, A. Z., Lee, S., Woo, S., Park, S., Bae, B., & Yim, S. (2021) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac2c13 · Cited by 18
Quarz, P., Zimmerer, N., Scharfer, P., & Schabel, W. (2024) · Fuel Cells · doi:10.1002/fuce.202300252 · Cited by 17
Mima, T., Kinjo, T., Yamakawa, S., & Asahi, R. (2017) · Soft Matter · doi:10.1039/c7sm01196b · Cited by 19
One simple method to mitigate the structure degradation of alloy catalyst layer in PEMFC
Li, W., Lin, R., & Yang, Y. (2019) · Electrochimica Acta · doi:10.1016/j.electacta.2019.134823 · Cited by 17
Hirai, T., Hommura, S., Watakabe, A., Miyajima, T., Nakayama, S., Tamoto, K., & Uchida, M. (2024) · ACS Applied Energy Materials · doi:10.1021/acsaem.4c00177 · Cited by 16
Kang, J., Zheng, W., Chen, S., Yang, D., Li, B., Zhang, C., & Ming, P. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.235269 · Cited by 16
Huang, K., Lin, H., Zhou, L., Wang, L., & Jia, H. (2022) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac63f2 · Cited by 16
Kräenbring, M., Wickert, L., Hansen, M., Sanden, S., Pellumbi, K., Wolf, J., Siegmund, D., Özcan, F., Apfel, U., & Segets, D. (2023) · ChemCatChem · doi:10.1002/cctc.202301273 · Cited by 15
Kusano, T., Kumano, N., Yoshimune, W., Munekata, T., Matsunaga, T., & Harada, M. (2021) · Langmuir · doi:10.1021/acs.langmuir.1c00968 · Cited by 15
Proton-Exchange Membrane Fuel Cells with Low-Pt Content
Kongkanand, A., Gu, W., & Mathias, M. F. (2017) · Springer eBooks · doi:10.1007/978-1-4939-2493-6_1022-1 · Cited by 18
Harada, M., Kadoura, H., Takata, S.-I., Iwase, H., Kajiya, S., Suzuki, T., Hasegawa, N., Shinohara, A., & Kato, S. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c08432 · Cited by 13
Katayama, S., & Sugawara, S. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.229178 · Cited by 13
Nguyen, V. L., Permatasari, A., So, M., Yano, T., & Inoue, G. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.237421 · Cited by 14
Harada, M., Kajiya, S., Mitsuoka, T., Takata, S.-I., Iwase, H., & Aoki, H. (2023) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2023.131183 · Cited by 12
Devivaraprasad, R., & Masuda, T. (2020) · Langmuir · doi:10.1021/acs.langmuir.0c02023 · Cited by 11
Kishi, M., Tanaka, M., & Mori, T. (2019) · Journal of the Ceramic Society of Japan · doi:10.2109/jcersj2.19152 · Cited by 12
Ahmed-Maloum, M., David, T., Guétaz, L., Morin, A., Pauchet, J., Quintard, M., & Prat, M. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.07.097 · Cited by 11
A Review of History, Production and Storage of Hydrogen
Guerrero, J. W. G., Barcelo, J. D. L. H., Rivera-Pacheco, D., Ramos-Barrera, L., & Martínez-Palacio, U. J. (2021) · Journal of Engineering Science and Technology Review · doi:10.25103/jestr.145.14 · Cited by 12
Kariuki, N. N., Haug, A. T., Park, J. W., Lindell, M. J., & Myers, D. J. (2022) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac94a4 · Cited by 11
Turtayeva, Z., Xu, F., Dillet, J., Mozet, K., Peignier, R., Celzard, A., & Maranzana, G. (2023) · Energies · doi:10.3390/en16227519 · Cited by 10
Iden, H., Ohma, A., Tokunaga, T., Yokoyama, K., & Shinohara, K. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp00704j · Cited by 9
Self-citationWang, S., Wang, Q., Deng, X., & Zhu, Y. K. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.04.034 · Cited by 8
Metadata
- Authors
- Takahashi, S., Mashio, T., Horibe, N., Akizuki, K., & Ohma, A.
- Affiliations
- Nissan (Japan) (JP)
- Corresponding author
- Ohma, Atsushi
- ORCID
- Horibe, Norifumi
- Venue
- ChemElectroChem
- Publisher
- Wiley
- Published
- 2015-07-14
- Volume
- 2
- Issue
- 10
- Pages
- 1560-1567
- ISSN
- 2196-0216 (ISSN-L)
- OpenAlex
- W2123109551
- Cited by
- 143
- References
- 48
- Citations by year
- 2026: 10 · 2025: 16 · 2024: 18 · 2023: 9 · 2022: 17 · 2021: 22 · 2020: 13 · 2019: 13 · 2018: 7 · 2017: 10 · 2016: 8
- FWCI
- 4.02
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- ChemElectroChem (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Materials Science › Materials Chemistry › Advancements in Solid Oxide Fuel Cells
- Keywords
- proton exchange membrane fuel cells, catalyst layer microstructure, catalyst ink, cryo-SEM, particle size distribution, oxygen reduction kinetics, mass transfer, cathode catalyst layer, membrane electrode assembly, fuel cell performance
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.