Analysis of the Microstructure Formation Process and Its Influence on the Performance of Polymer Electrolyte Fuel-Cell Catalyst Layers
The DOI matches its Crossref record; 47 of the 48 references it cites were found in a registry or an index.
Abstract
To understand the formation process of the microstructure of the catalyst layer of a polymer electrolyte fuel cell (PEFC), we tried to observe the “real” structure of the catalyst ink by cryogenic scanning electron microscopy (cryo‐SEM). Catalyst inks with different water/alcohol compositions were successfully visualized, and they correlated well with the particle‐size distribution obtained by laser diffraction of the ink and the structures of the catalyst layers obtained by typical SEM. On the basis of other electrochemical characterization results, including current–voltage performance, oxygen reduction reaction kinetics, and mass‐transport properties, the microstructures of the catalyst inks and the catalyst layers were proposed. The proposed microstructures can explain the relationship between the catalyst materials and the performance of the cathode catalyst layer of the membrane electrode assembly through its formation and apparent properties. It was also found that the microstructure of the catalyst ink plays an important role in performance.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“For example, hydrophobic carbon tends to form large agglomerates in the polar solvent, e.g., water/alcohol mixed solvent, due to hydrophobic interaction [25]”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [25]
In the citing paper
“It was believed that the colloid ionomer with fine dispersion or specific size adsorbs on catalyst agglomerates, resulting in the formation of the slightly larger agglomerates, which improves the CL microstructure and enhances the porosity and then the gas transport, further the fuel cell performance [23,25,132,138,139].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [25]
In the citing paper
“The morphology, size, and conformation of the ionomer agglomerates dispersed will differ with the water fraction or the type of alcohol, altering the CLs' structure and their performance [25,30,32,49,57,131,137,140].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [25]
In the citing paper
“For example, if using dipropylene glycol (DPG)/1-propyl alcohol (NPA) and water mixtures as the solvent, the ionomer agglomerates with moderate size close to that of Pt/C agglomerates in the catalyst ink not only form a connected ionomer network, but also maintain the adequate porosity in CL [23,25], offering an improved PEM fuel cells performance.”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [25]
Citations
Cites
Highly Crystalline Multimetallic Nanoframes with Three-Dimensional Electrocatalytic Surfaces
Chen, C., Kang, Y., Huo, Z., Zhu, Z., Huang, W., Xin, H. L., Snyder, J. D., Li, D., Herron, J. A., Mavrikakis, M., et al. (2014) · Science · doi:10.1126/science.1249061 · Cited by 2,765
Makharia, R., Mathias, M. F., & Baker, D. R. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1888367 · Cited by 514
Analysis of Oxygen-Transport Diffusion Resistance in Proton-Exchange-Membrane Fuel Cells
Nonoyama, N., Okazaki, S., Weber, A. Z., Ikogi, Y., & Yoshida, T. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3546038 · Cited by 512
Impact of Platinum Loading and Catalyst Layer Structure on PEMFC Performance
Owejan, J. P., Owejan, J. E., & Gu, W. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.072308jes · Cited by 423
Water Management in Cathode Catalyst Layers of PEM Fuel Cells
Eikerling, M. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2160435 · Cited by 295
Liu, Y., Murphy, M. W., Baker, D. R., Gu, W., Ji, C., Jorne, J., & Gasteiger, H. A. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3143965 · Cited by 290
New Preparation Method for Polymer‐Electrolyte Fuel Cells
Uchida, M., Aoyama, Y., Eda, N., & Ohta, A. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2044068 · Cited by 282
Lefebvre, M. C. (1999) · Electrochemical and Solid-State Letters · doi:10.1149/1.1390804 · Cited by 278
Ngo, T. T., Yu, T. L., & Lin, H.-L. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.055 · Cited by 231
Subbaraman, R., Strmcnik, D., Stamenkovic, V., & Markovic, N. M. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp100814x · Cited by 217
Ohma, A., Mashio, T., Sato, K., Iden, H., Ono, Y., Sakai, K., Akizuki, K., Takaichi, S., & Shinohara, K. (2011) · Electrochimica Acta · doi:10.1016/j.electacta.2011.04.058 · Cited by 209
Self-citationShin, S.-J., Lee, J.-K., Ha, H.-Y., Hong, S.-A., Chun, H.-S., & Oh, I.-H. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(01)01045-x · Cited by 205
Self-Organization in Catalyst Layers of Polymer Electrolyte Fuel Cells
Malek, K., Eikerling, M., Wang, Q., Navessin, T., & Liu, Z. (2007) · The Journal of Physical Chemistry C · doi:10.1021/jp072692k · Cited by 200
Uchida, M., Fukuoka, Y., Sugawara, Y., Ohara, H., & Ohta, A. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838863 · Cited by 191
Wang, Q., Eikerling, M. H., Song, D., & Liu, Z. (2004) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2004.06.022 · Cited by 157
Catalyst Poisoning Property of Sulfonimide Acid Ionomer on Pt (111) Surface
Kodama, K., Shinohara, A., Hasegawa, N., Shinozaki, K., Jinnouchi, R., Suzuki, T., Hatanaka, T., & Morimoto, Y. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.051405jes · Cited by 141
Park, Y.-C., Kakinuma, K., Uchida, H., Watanabe, M., & Uchida, M. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.10.149 · Cited by 123
19F NMR studies of Nafion™ ionomer adsorption on PEMFC catalysts and supporting carbons
MA, S., CHEN, Q., JOGENSEN, F., Stein, P. C., & Skou, E. M. (2007) · Solid State Ionics · doi:10.1016/j.ssi.2007.10.007 · Cited by 120
Fernández, R., Ferreira-Aparicio, P., & Daza, L. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.02.048 · Cited by 120
Ohma, A., Fushinobu, K., & Okazaki, K. (2010) · Electrochimica Acta · doi:10.1016/j.electacta.2010.08.005 · Cited by 110
Self-citationAnalysis of Reactant Gas Transport in Catalyst Layers; Effect of Pt-loadings
Sakai, K., Sato, K., Mashio, T., Ohma, A., Yamaguchi, K., & Shinohara, K. (2009) · ECS Transactions · doi:10.1149/1.3210674 · Cited by 109
Self-citationAn in situ technique for analyzing ionomer coverage in catalyst layers
Iden, H., & Ohma, A. (2013) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2013.01.026 · Cited by 107
Self-citationPlatinum Coated Copper Nanowires and Platinum Nanotubes as Oxygen Reduction Electrocatalysts
Alia, S. M., Jensen, K., Contreras, C., Garzon, F., Pivovar, B., & Yan, Y. (2013) · ACS Catalysis · doi:10.1021/cs300664g · Cited by 102
Analysis of Reactant Gas Transport in a Catalyst Layer
Mashio, T., Ohma, A., Yamamoto, S., & Shinohara, K. (2007) · ECS Transactions · doi:10.1149/1.2780966 · Cited by 100
Self-citationPlatinum Monolayer Electrocatalysts: Tunable Activity, Stability, and Self-Healing Properties
Adžić, R. R. (2012) · Electrocatalysis · doi:10.1007/s12678-012-0112-3 · Cited by 94
Effect of dispersion solvent in catalyst ink on proton exchange membrane fuel cell performance
Huang, D.-C., Yu, P.-J., Liu, F.-J., Huang, S.-L., Hsueh, K.-L., Chen, Y.-C., Wu, C.-H., Chang, W.-C., & Tsau, F.-H. (2011) · International Journal of Electrochemical Science · doi:10.1016/s1452-3981(23)18202-2 · Cited by 93
Fuel cell cathode catalyst layers from “green” catalyst inks
Xie, Z., Zhao, X., Adachi, M., Shi, Z., Mashio, T., Ohma, A., Shinohara, K., Holdcroft, S., & Navessin, T. (2008) · Energy & Environmental Science · doi:10.1039/b808613n · Cited by 86
Self-citationMolecular Dynamics Study of Ionomer Adsorption at a Carbon Surface in Catalyst Ink
Mashio, T., Ohma, A., & Tokumasu, T. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.04.004 · Cited by 84
Self-citationXu, F., Zhang, H., Ilavsky, J., Stanciu, L., Ho, D., Justice, M. J., Petrache, H. I., & Xie, J. (2010) · Langmuir · doi:10.1021/la1028228 · Cited by 82
Effect of soluble polymer binder on particle distribution in a drying particulate coating
Buss, F., Roberts, C. C., Crawford, K. S., Peters, K., & Francis, L. F. (2011) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2011.03.054 · Cited by 78
Relationship among Microstructure, Ionomer Property and Proton Transport in Pseudo Catalyst Layers
Iden, H., Sato, K., Ohma, A., & Shinohara, K. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3598141 · Cited by 76
Self-citationITO, T., MATSUWAKI, U., OTSUKA, Y., HATTA, M., HAYAKAWA, K., MATSUTANI, K., TADA, T., & JINNAI, H. (2011) · Electrochemistry · doi:10.5796/electrochemistry.79.374 · Cited by 71
SANS studies on catalyst ink of fuel cell
Shibayama, M., Matsunaga, T., Kusano, T., Amemiya, K., Kobayashi, N., & Yoshida, T. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39842 · Cited by 66
Analysis of Proton Transport in Pseudo Catalyst Layers
Iden, H., Ohma, A., & Shinohara, K. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3169514 · Cited by 66
Self-citationMasuda, T., Sonsudin, F., Singh, P. R., Naohara, H., & Uosaki, K. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp404376t · Cited by 65
Ishihara, A., Tamura, M., Ohgi, Y., Matsumoto, M., Matsuzawa, K., Mitsushima, S., Imai, H., & Ota, K. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp405247m · Cited by 65
Arumugam, B., Kakade, B. A., Tamaki, T., Arao, M., Imai, H., & Yamaguchi, T. (2014) · RSC Advances · doi:10.1039/c4ra04744c · Cited by 59
Omura, J., Yano, H., Watanabe, M., & Uchida, H. (2011) · Langmuir · doi:10.1021/la200694a · Cited by 58
Cryo-SEM studies of latex/ceramic nanoparticle coating microstructure development
Luo, H., Scriven, L. E., & Francis, L. F. (2007) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2007.07.047 · Cited by 50
Gas transport inside and outside carbon supports of catalyst layers for PEM fuel cells
Iden, H., Mashio, T., & Ohma, A. (2013) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2013.09.011 · Cited by 49
Self-citationStrong, A., Britton, B., Edwards, D., Peckham, T. J., Lee, H.-F., Huang, W. Y., & Holdcroft, S. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0251506jes · Cited by 40
Prakash, S. S., Francis, L. F., & Scriven, L. E. (2008) · Journal of Membrane Science · doi:10.1016/j.memsci.2008.01.006 · Cited by 35
Yano, H., Akiyama, T., Watanabe, M., & Uchida, H. (2012) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2012.09.028 · Cited by 34
Microstructure evolution in dry cast cellulose acetate membranes by cryo-SEM
Prakash, S. S., Francis, L. F., & Scriven, L. E. (2006) · Journal of Membrane Science · doi:10.1016/j.memsci.2006.07.001 · Cited by 27
Oxygen Reduction Activity of Vapor-Grown Platinum Nanotubes
Papandrew, A. B., Atkinson, R. W., Goenaga, G. A., Kocha, S. S., Zack, J. W., Pivovar, B. S., & Zawodzinski, T. A. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.090308jes · Cited by 27
Impact of Solvent on Ionomer Structure and Fuel Cell Durability
Johnston, C. M., Lee, K.-S., Rockward, T., Labouriau, A., Mack, N., & Kim, Y. S. (2009) · ECS Transactions · doi:10.1149/1.3210717 · Cited by 27
Effect of Ionomer Coverage on Pt-based Catalyst on ORR Activity
Furuya, Y., Iden, H., Mashio, T., Ohma, A., & Shinohara, K. (2012) · ECS Meeting Abstracts · doi:10.1149/ma2012-01/40/1522 · Cited by 8
Self-citation
Research works printed but not linked: 2
- 10.5796/electrochemistry.81.641 · doi:10.5796/electrochemistry.81.641
- K. L. More Characterization of Fuel Cell Materials Proceeding of 2014 DOE Annual Merit Review June2014 Washington DC.
Cited by
Suter, T. A. M., Smith, K., Hack, J., Rasha, L., Rana, Z., Angel, G. M. A., Shearing, P. R., Miller, T. S., & Brett, D. J. L. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202101025 · Cited by 245
Hou, J., Yang, M., Ke, C., Wei, G., Priest, C., Qiao, Z., Wu, G., & Zhang, J. (2020) · EnergyChem · doi:10.1016/j.enchem.2019.100023 · Cited by 246
Chen, M., Zhao, C., Sun, F., Fan, J., Li, H., & Wang, H. (2020) · eTransportation · doi:10.1016/j.etran.2020.100075 · Cited by 212
The Controllable Design of Catalyst Inks to Enhance PEMFC Performance: A Review
Guo, Y., Pan, F., Chen, W., Ding, Z., Yang, D., Li, B., Ming, P., & Zhang, C. (2021) · Electrochemical Energy Reviews · doi:10.1007/s41918-020-00083-2 · Cited by 175
“[157] reported that increases in the ratio of water to alcohol in NPA/water binary mixtures led to increase in agglomerate size and separation between ionomers and agglomerates (Fig.”
BackgroundJaiser, S., Kumberg, J., Klaver, J., Urai, J. L., Schabel, W., Schmatz, J., & Scharfer, P. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.01.117 · Cited by 167
Metadata
- Authors
- Takahashi, S., Mashio, T., Horibe, N., Akizuki, K., & Ohma, A.
- Affiliations
- Nissan (Japan) (JP)
- Corresponding author
- Ohma, Atsushi
- ORCID
- Horibe, Norifumi
- Venue
- ChemElectroChem
- Publisher
- Wiley
- Published
- 2015-07-14
- Volume
- 2
- Issue
- 10
- Pages
- 1560-1567
- ISSN
- 2196-0216 (ISSN-L)
- OpenAlex
- W2123109551
- Cited by
- 143
- References
- 48
- Citations by year
- 2026: 10 · 2025: 16 · 2024: 18 · 2023: 9 · 2022: 17 · 2021: 22 · 2020: 13 · 2019: 13 · 2018: 7 · 2017: 10 · 2016: 8
- FWCI
- 4.02
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- ChemElectroChem (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Materials Science › Materials Chemistry › Advancements in Solid Oxide Fuel Cells
- Keywords
- proton exchange membrane fuel cells, catalyst layer microstructure, catalyst ink, cryo-SEM, particle size distribution, oxygen reduction kinetics, mass transfer, cathode catalyst layer, membrane electrode assembly, fuel cell performance
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.