Role of Dissolved and Molecular Oxygen on Cu and PtCu Alloy Particle Structure during Laser Ablation Synthesis in Liquids
The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Abstract
The role of molecular oxygen dissolved in the solvent is often discussed as being an influential factor on particle oxidation during pulsed laser ablation in liquids. However, the formation of the particles during laser synthesis takes place under extreme conditions that enable the decomposition of the liquid medium. Reactive species of the solvent may then affect particle formation due to a chemical reaction in the reactive plasma. Experimental results show a difference between the role of dissolved molecular oxygen and the contribution from the oxygen in water molecules. Using a metallic Cu target in air‐saturated water, laser ablation led to 20.5 wt % Cu, 11.5 wt % Cu 2 O, and 68 wt % CuO nanoparticles, according to X‐ray diffraction results. In contrast to particles obtained in air‐saturated water, no CuO was observed in the colloid synthesized in a Schlenk ablation chamber in completely oxygen‐free water. Under these conditions, less‐oxidized nanoparticles (25 wt % Cu and 75 wt % Cu 2 O) were synthesized. The results show that nanoparticle oxidation during laser synthesis is mainly caused by reactive oxygen species from the decomposition of water molecules. However, the addition of molecular oxygen promotes particle oxidation. Storage of the Cu colloid in the presence of dissolved oxygen leads, due to aging, to nanostructures with a higher oxidation state than the freshly prepared colloid. The XRD pattern of the sample prepared in air‐saturated acetone showed no crystalline phases, which is possibly due to small crystallites or low particle concentration. Concentration of the particles by centrifugation showed that in the large fraction (>20 nm), even less oxidized nanoparticles (46 wt % Cu and 54 wt % Cu 2 O) were present, although the solubility of molecular oxygen is higher in acetone than in water. The nanoparticles in acetone were stable due to a Cu‐catalyzed graphite layer formed on their surfaces. The influence of the solvent on alloy synthesis is also crucial. Laser ablation of PtCu 3 in air‐saturated water led to separated large CuO and Pt‐rich spherical nanoparticles, whereas homogeneous PtCu 3 alloy nanoparticles were formed in acetone.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Amendola, V., & Meneghetti, M. (2013) · Phys. Chem. Chem. Phys. · doi:10.1039/c2cp42895d · Cited by 758
Vogel, A., Lauterborn, W., & Timm, R. (1989) · Journal of Fluid Mechanics · doi:10.1017/s0022112089002314 · Cited by 687
Streubel, R., Barcikowski, S., & Gökce, B. (2016) · Optics Letters · doi:10.1364/ol.41.001486 · Cited by 283
Self-citationPulsed laser ablation based synthesis of colloidal metal nanoparticles for catalytic applications
Zhang, J., Chaker, M., & Ma, D. (2017) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2016.07.050 · Cited by 264
Wagener, P., Ibrahimkutty, S., Menzel, A., Plech, A., & Barcikowski, S. (2013) · Phys. Chem. Chem. Phys. · doi:10.1039/c2cp42592k · Cited by 191
Self-citationDynamical study of bubble expansion following laser ablation in liquids
Lam, J., Lombard, J., Dujardin, C., Ledoux, G., Merabia, S., & Amans, D. (2016) · Applied Physics Letters · doi:10.1063/1.4942389 · Cited by 174
Amendola, V., & Meneghetti, M. (2007) · Journal of Materials Chemistry · doi:10.1039/b709621f · Cited by 150
Wagener, P., Jakobi, J., Rehbock, C., Chakravadhanula, V. S. K., Thede, C., Wiedwald, U., Bartsch, M., Kienle, L., & Barcikowski, S. (2016) · Scientific Reports · doi:10.1038/srep23352 · Cited by 150
Self-citationNeumeister, A., Jakobi, J., Rehbock, C., Moysig, J., & Barcikowski, S. (2014) · Phys. Chem. Chem. Phys. · doi:10.1039/c4cp03316g · Cited by 125
Self-citationBärsch, N., Jakobi, J., Weiler, S., & Barcikowski, S. (2009) · Nanotechnology · doi:10.1088/0957-4484/20/44/445603 · Cited by 122
Self-citation
Cited by
Amendola, V., Amans, D., Ishikawa, Y., Koshizaki, N., Scirè, S., Compagnini, G., Reichenberger, S., & Barcikowski, S. (2020) · Chemistry – A European Journal · doi:10.1002/chem.202000686 · Cited by 354
Self-citationPulsed Laser in Liquids Made Nanomaterials for Catalysis
Forsythe, R. C., Cox, C. P., Wilsey, M. K., & Müller, A. M. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01069 · Cited by 259
Kanitz, A., Kalus, M.-R., Gurevich, E. L., Ostendorf, A., Barcikowski, S., & Amans, D. (2019) · Plasma Sources Science and Technology · doi:10.1088/1361-6595/ab3dbe · Cited by 195
Self-citationDetermining the role of redox-active materials during laser-induced water decomposition
Kalus, M.-R., Lanyumba, R., Lorenzo-Parodi, N., Jochmann, M. A., Kerpen, K., Hagemann, U., Schmidt, T. C., Barcikowski, S., & Gökce, B. (2019) · Physical Chemistry Chemical Physics · doi:10.1039/c9cp02663k · Cited by 62
Self-citation
Metadata
- Authors
- Marzun, G., Bönnemann, H., Lehmann, C., Spliethoff, B., Weidenthaler, C., & Barcikowski, S.
- Venue
- ChemPhysChem
- Publisher
- Wiley
- Published
- 2017-03-20
- Volume
- 18
- Issue
- 9
- Pages
- 1175-1184
- ISSN
- 1439-4235 (ISSN-L)
- 1439-7641
- OpenAlex
- W2600604068
- Cited by
- 90
- References
- 13
- FWCI
- 4.07
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Role of Dissolved and Molecular Oxygen on Cu and PtCu Alloy Particle Structure during Laser Ablation Synthesis in Liquids. https://app.cochat.ai/papers/10.1002/cphc.201601315
- The paper
- Marzun, G., Bönnemann, H., Lehmann, C., Spliethoff, B., Weidenthaler, C., & Barcikowski, S. (2017). Role of Dissolved and Molecular Oxygen on Cu and PtCu Alloy Particle Structure during Laser Ablation Synthesis in Liquids. ChemPhysChem. https://doi.org/10.1002/cphc.201601315
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.