The DOI matches its Crossref record; 89 of the 89 references it cites were found in a registry or an index.
Tuning of ZIF‐Derived Carbon with High Activity, Nitrogen Functionality, and Yield – A Case for Superior CO2 Capture
Open accessAbstract
A highly effective and facile synthesis route is developed to create and tailor metal‐decorated and nitrogen‐functionalized active microporous carbon materials from ZIF‐8. Clear metal‐ and pyrrolic‐N‐induced enhancements of the cyclic CO 2 uptake capacities and binding energies are achieved, particularly at a much lower carbonization temperature of 700 °C than those often reported (1000 °C). The high‐temperature carbonization can enhance the porosity but only at the expense of considerable losses of sample yield and metal and N functional sites. The findings are comparatively discussed with carbons derived from metal–organic frameworks (MOFs) reported previously. Furthermore, the porosity of the MOF‐derived carbon is critically dependent on the structure of the precursor MOF and the crystal growth. The current strategy offers a new and effective route for the creation and tuning of highly active and functionalized carbon structures in high yields and with low energy consumption.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Capturing carbon dioxide as a polymer from natural gas
Hwang, C.-C., Tour, J. J., Kittrell, C., Espinal, L., Alemany, L. B., & Tour, J. M. (2014) · Nature Communications · doi:10.1038/ncomms4961 · Cited by 53
RetractedUltrahigh Porosity in Metal-Organic Frameworks
Furukawa, H., Ko, N., Go, Y. B., Aratani, N., Choi, S. B., Choi, E., Yazaydin, A. Ö., Snurr, R. Q., O’Keeffe, M., Kim, J., et al. (2010) · Science · doi:10.1126/science.1192160 · Cited by 3,904
Metal-Organic Framework as a Template for Porous Carbon Synthesis
Liu, B., Shioyama, H., Akita, T., & Xu, Q. (2008) · Journal of the American Chemical Society · doi:10.1021/ja7106146 · Cited by 1,829
Rapid synthesis of zeolitic imidazolate framework-8 (ZIF-8) nanocrystals in an aqueous system
Pan, Y., Liu, Y., Zeng, G., Zhao, L., & Lai, Z. (2011) · Chemical Communications · doi:10.1039/c0cc05002d · Cited by 1,735
Kaye, S. S., Dailly, A., Yaghi, O. M., & Long, J. R. (2007) · Journal of the American Chemical Society · doi:10.1021/ja076877g · Cited by 1,660
Density functional theory methods for characterization of porous materials
Landers, J., Gor, G. Y., & Neimark, A. V. (2013) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2013.01.007 · Cited by 1,239
Jiang, H.-L., Liu, B., Lan, Y.-Q., Kuratani, K., Akita, T., Shioyama, H., Zong, F., & Xu, Q. (2011) · Journal of the American Chemical Society · doi:10.1021/ja203184k · Cited by 1,197
Postsynthetic modification of metal–organic frameworks—a progress report
Tanabe, K. K., & Cohen, S. M. (2011) · Chem. Soc. Rev. · doi:10.1039/c0cs00031k · Cited by 1,173
N‐Doped Polypyrrole‐Based Porous Carbons for CO2 Capture
Sevilla, M., Valle‐Vigón, P., & Fuertes, A. B. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100291 · Cited by 936
Cravillon, J., Nayuk, R., Springer, S., Feldhoff, A., Huber, K., & Wiebcke, M. (2011) · Chemistry of Materials · doi:10.1021/cm103571y · Cited by 916
Xu, X., Cao, R., Jeong, S., & Cho, J. (2012) · Nano Letters · doi:10.1021/nl302618s · Cited by 914
Chaikittisilp, W., Ariga, K., & Yamauchi, Y. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00278g · Cited by 828
Synthesis of Nitrogen‐Doped Graphene Using Embedded Carbon and Nitrogen Sources
Zhang, C., Fu, L., Liu, N., Liu, M., Wang, Y., & Liu, Z. (2011) · Advanced Materials · doi:10.1002/adma.201004110 · Cited by 824
Lü, Y., Zhan, W., He, Y., Wang, Y., Kong, X., Kuang, Q., Xie, Z., & Zheng, L. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am405858v · Cited by 813
Zhang, P., Sun, F., Xiang, Z., Shen, Z., Yun, J., & Cao, D. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42799d · Cited by 781
MOF-Derived Hierarchically Porous Carbon with Exceptional Porosity and Hydrogen Storage Capacity
Yang, S. J., Kim, T., Im, J. H., Kim, Y. S., Lee, K., Jung, H., & Park, C. R. (2012) · Chemistry of Materials · doi:10.1021/cm202554j · Cited by 749
Ding, W., Wei, Z., Chen, S., Qi, X., Yang, T., Hu, J., Wang, D., Wan, L., Alvi, S. F., & Li, L. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201303924 · Cited by 736
Graphene-based materials: Synthesis and gas sorption, storage and separation
Gadipelli, S., & Guo, Z. X. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.10.004 · Cited by 734
Self-citationFunctional materials derived from open framework templates/precursors: synthesis and applications
Sun, J.-K., & Xu, Q. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00517a · Cited by 687
Chaikittisilp, W., Hu, M., Wang, H., Huang, H.-S., Fujita, T., Wu, K. C.-W., Chen, L.-C., Yamauchi, Y., & Ariga, K. (2012) · Chemical Communications · doi:10.1039/c2cc33433j · Cited by 683
Torad, N. L., Hu, M., Ishihara, S., Sukegawa, H., Belik, A. A., Imura, M., Ariga, K., Sakka, Y., & Yamauchi, Y. (2014) · Small · doi:10.1002/smll.201302910 · Cited by 673
Direct Carbonization of Al-Based Porous Coordination Polymer for Synthesis of Nanoporous Carbon
Hu, M., Reboul, J., Furukawa, S., Torad, N. L., Ji, Q., Srinivasu, P., Ariga, K., Kitagawa, S., & Yamauchi, Y. (2012) · Journal of the American Chemical Society · doi:10.1021/ja208940u · Cited by 632
Post-synthetic metalation of metal–organic frameworks
Evans, J. D., Sumby, C. J., & Doonan, C. J. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00076e · Cited by 618
Introduction to Organic Spectroscopy
Lambert, J. B. (1987) · Medical Entomology and Zoology · Cited by 583
Formation of high crystalline ZIF-8 in an aqueous solution
Kida, K., Okita, M., Fujita, K., Tanaka, S., & Miyake, Y. (2013) · CrystEngComm · doi:10.1039/c2ce26847g · Cited by 583
Dementjev, A. P., de Graaf, A., van de Sanden, M. C. M., Maslakov, K. I., Naumkin, A. V., & Serov, A. A. (2000) · Diamond and Related Materials · doi:10.1016/s0925-9635(00)00345-9 · Cited by 572
Nguyen, J. G., & Cohen, S. M. (2010) · Journal of the American Chemical Society · doi:10.1021/ja100900c · Cited by 571
Aijaz, A., Fujiwara, N., & Xu, Q. (2014) · Journal of the American Chemical Society · doi:10.1021/ja5003907 · Cited by 569
Yang, S. J., Nam, S., Kim, T., Im, J. H., Jung, H., Kang, J. H., Wi, S., Park, B., & Park, C. R. (2013) · Journal of the American Chemical Society · doi:10.1021/ja311550t · Cited by 518
Torad, N. L., Hu, M., Kamachi, Y., Takai, K., Imura, M., Naito, M., & Yamauchi, Y. (2013) · Chemical Communications · doi:10.1039/c3cc38955c · Cited by 518
Electric Double‐Layer Capacitors Based on Highly Graphitized Nanoporous Carbons Derived from ZIF‐67
Torad, N. L., Salunkhe, R. R., Li, Y., Hamoudi, H., Imura, M., Sakka, Y., Hu, C., & Yamauchi, Y. (2014) · Chemistry – A European Journal · doi:10.1002/chem.201400089 · Cited by 481
Synthesis of graphene-like nanosheets and their hydrogen adsorption capacity
Gadipelli, S., Zhu, Y., Piner, R. D., Skipper, N. T., Ellerby, M., & Ruoff, R. S. (2009) · Carbon · doi:10.1016/j.carbon.2009.10.003 · Cited by 471
Self-citationMetal‐Organic Framework Templated Synthesis of Fe2O3/TiO2 Nanocomposite for Hydrogen Production
deKrafft, K. E., Wang, C., & Lin, W. (2012) · Advanced Materials · doi:10.1002/adma.201200330 · Cited by 445
Cobalt Imidazolate Framework as Precursor for Oxygen Reduction Reaction Electrocatalysts
Ma, S., Goenaga, G. A., Call, A. V., & Liu, D. (2011) · Chemistry – A European Journal · doi:10.1002/chem.201003080 · Cited by 431
Artyushkova, K., Kiefer, B., Halevi, B., Knop-Gericke, A., Schlogl, R., & Atanassov, P. (2013) · Chemical Communications · doi:10.1039/c3cc40324f · Cited by 430
Srinivas, G., Krungleviciute, V., Guo, Z.-X., & Yildirim, T. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42918k · Cited by 428
Self-citationLi, Q., Xu, P., Gao, W., Ma, S., Zhang, G., Cao, R., Cho, J., Wang, H., & Wu, G. (2014) · Advanced Materials · doi:10.1002/adma.201304218 · Cited by 426
Graphene Oxide Framework Materials: Theoretical Predictions and Experimental Results
Burress, J. W., Gadipelli, S., Ford, J., Simmons, J. M., Zhou, W., & Yildirim, T. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201003328 · Cited by 421
Self-citationCarbon capture in metal–organic frameworks—a comparative study
Simmons, J. M., Wu, H., Zhou, W., & Yildirim, T. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00700e · Cited by 402
Functional Hybrid Porous Coordination Polymers
Foo, M. L., Matsuda, R., & Kitagawa, S. (2014) · Chemistry of Materials · doi:10.1021/cm402136z · Cited by 402
Embedding Sulfur in MOF‐Derived Microporous Carbon Polyhedrons for Lithium–Sulfur Batteries
Wu, H. B., Wei, S., Zhang, L., Xu, R., Hng, H. H., & Lou, X. W. (. (2013) · Chemistry – A European Journal · doi:10.1002/chem.201301689 · Cited by 386
Xi, K., Cao, S., Peng, X., Ducati, C., Vasant Kumar, R., & Cheetham, A. K. (2013) · Chemical Communications · doi:10.1039/c3cc38009b · Cited by 376
Guo, Z., Wu, H., Srinivas, G., Zhou, Y., Xiang, S., Chen, Z., Yang, Y., Zhou, W., O'Keeffe, M., & Chen, B. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201007583 · Cited by 370
Self-citationAmali, A. J., Sun, J.-K., & Xu, Q. (2014) · Chem. Commun. · doi:10.1039/c3cc48112c · Cited by 350
Cao, X., Zheng, B., Rui, X., Shi, W., Yan, Q., & Zhang, H. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201308013 · Cited by 335
Lee, W. R., Hwang, S. Y., Ryu, D. W., Lim, K. S., Han, S. S., Moon, D., Choi, J., & Hong, C. S. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42328j · Cited by 329
Jeon, J.-W., Sharma, R., Meduri, P., Arey, B. W., Schaef, H. T., Lutkenhaus, J. L., Lemmon, J. P., Thallapally, P. K., Nandasiri, M. I., McGrail, B. P., et al. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am500339x · Cited by 325
Banerjee, A., Gokhale, R., Bhatnagar, S., Jog, J., Bhardwaj, M., Lefez, B., Hannoyer, B., & Ogale, S. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm33798c · Cited by 324
Zhao, D., Shui, J., Grabstanowicz, L. R., Chen, C., Commet, S. M., Xu, T., Lu, J., & Liu, D. (2014) · Advanced Materials · doi:10.1002/adma.201304238 · Cited by 313
Su, P., Xiao, H., Zhao, J., Yao, Y., Shao, Z., Li, C., & Yang, Q. (2013) · Chemical Science · doi:10.1039/c3sc51052b · Cited by 304
Wu, H., Simmons, J. M., Srinivas, G., Zhou, W., & Yildirim, T. (2010) · The Journal of Physical Chemistry Letters · doi:10.1021/jz100558r · Cited by 304
A thermally derived and optimized structure from ZIF-8 with giant enhancement in CO2 uptake
Gadipelli, S., Travis, W., Zhou, W., & Guo, Z. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01009d · Cited by 304
Self-citationChaikittisilp, W., Torad, N. L., Li, C., Imura, M., Suzuki, N., Ishihara, S., Ariga, K., & Yamauchi, Y. (2014) · Chemistry – A European Journal · doi:10.1002/chem.201304404 · Cited by 272
Kim, T. K., Lee, K. J., Cheon, J. Y., Lee, J. H., Joo, S. H., & Moon, H. R. (2013) · Journal of the American Chemical Society · doi:10.1021/ja401869h · Cited by 271
Critical role of small micropores in high CO2 uptake
Zhang, Z., Zhou, J., Xing, W., Xue, Q., Yan, Z., Zhuo, S., & Qiao, S. Z. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp44436d · Cited by 263
Petit, C., & Bandosz, T. J. (2012) · Dalton Transactions · doi:10.1039/c2dt12017h · Cited by 251
Porous graphene oxide frameworks: Synthesis and gas sorption properties
Srinivas, G., Burress, J. W., Ford, J., & Yildirim, T. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm11699a · Cited by 243
Reactive adsorption of acidic gases on MOF/graphite oxide composites
Petit, C., Levasseur, B., Mendoza, B., & Bandosz, T. J. (2012) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2011.09.012 · Cited by 227
Ding, W., Wei, Z., Chen, S., Qi, X., Yang, T., Hu, J., Wang, D., Wan, L., Alvi, S. F., & Li, L. (2013) · Angewandte Chemie · doi:10.1002/ange.201303924 · Cited by 221
Stability Effects on CO2 Adsorption for the DOBDC Series of Metal–Organic Frameworks
Liu, J., Benin, A. I., Furtado, A. M. B., Jakubczak, P., Willis, R. R., & LeVan, M. D. (2011) · Langmuir · doi:10.1021/la201774x · Cited by 204
Porous carbon materials with a controllable surface area synthesized from metal–organic frameworks
Lim, S., Suh, K., Kim, Y., Yoon, M., Park, H., Dybtsev, D. N., & Kim, K. (2012) · Chemical Communications · doi:10.1039/c2cc33439a · Cited by 204
Sorption studies of CO2, CH4, N2, CO, O2 and Ar on nanoporous aluminum terephthalate [MIL-53(Al)]
Rallapalli, P., Prasanth, K. P., Patil, D., Somani, R. S., Jasra, R. V., & Bajaj, H. C. (2011) · Journal of Porous Materials · doi:10.1007/s10934-010-9371-7 · Cited by 201
Highly porous nitrogen-doped polyimine-based carbons with adjustable microstructures for CO2 capture
Wang, J., Senkovska, I., Oschatz, M., Lohe, M. R., Borchardt, L., Heerwig, A., Liu, Q., & Kaskel, S. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta11995e · Cited by 201
Bloch, W. M., Babarao, R., Hill, M. R., Doonan, C. J., & Sumby, C. J. (2013) · Journal of the American Chemical Society · doi:10.1021/ja4032049 · Cited by 195
Preparation of Highly Moisture‐Resistant Black‐Colored Metal Organic Frameworks
Yang, S. J., & Park, C. R. (2012) · Advanced Materials · doi:10.1002/adma.201200790 · Cited by 190
Gadipelli, S., & Guo, Z. (2014) · Chemistry of Materials · doi:10.1021/cm502399q · Cited by 180
Self-citationAlmasoudi, A., & Mokaya, R. (2012) · J. Mater. Chem. · doi:10.1039/c1jm13314d · Cited by 180
Synthesis of metal–organic frameworks by continuous flow
Bayliss, P. A., Ibarra, I. A., Pérez, E., Yang, S., Tang, C. C., Poliakoff, M., & Schröder, M. (2014) · Green Chem. · doi:10.1039/c4gc00313f · Cited by 180
Graphene oxide derived carbons (GODCs): synthesis and gas adsorption properties
Srinivas, G., Burress, J., & Yildirim, T. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21100a · Cited by 179
Huang, Z.-H., Liu, G., & Kang, F. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am3013104 · Cited by 171
Han, Y., Qi, P., Li, S., Feng, X., Zhou, J., Li, H., Su, S., Li, X., & Wang, B. (2014) · Chemical Communications · doi:10.1039/c4cc02691h · Cited by 166
Ultrahigh Surface Area in Porous Solids
Holst, J. R., & Cooper, A. I. (2010) · Advanced Materials · doi:10.1002/adma.201002440 · Cited by 164
Wang, J., Senkovska, I., Oschatz, M., Lohe, M. R., Borchardt, L., Heerwig, A., Liu, Q., & Kaskel, S. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am400059t · Cited by 163
Palaniselvam, T., Biswal, B. P., Banerjee, R., & Kurungot, S. (2013) · Chemistry - A European Journal · doi:10.1002/chem.201300145 · Cited by 160
A novel activating strategy to achieve highly porous carbon monoliths for CO 2 capture
Ma, X., Li, Y., Cao, M., & Hu, C. (2014) · Journal of Materials Chemistry A · doi:10.1039/c3ta14684g · Cited by 148
Aiyappa, H. B., Pachfule, P., Banerjee, R., & Kurungot, S. (2013) · Crystal Growth & Design · doi:10.1021/cg401122u · Cited by 143
Pachfule, P., Biswal, B. P., & Banerjee, R. (2012) · Chemistry - A European Journal · doi:10.1002/chem.201200957 · Cited by 135
Li, R., Ren, X., Feng, X., Li, X., Hu, C., & Wang, B. (2014) · Chemical Communications · doi:10.1039/c4cc01087f · Cited by 115
Carbon dioxide adsorption performance of N-doped zeolite Y templated carbons
Zhou, J. P., Li, W., Zhang, Z., Xing, W., & Zhuo, S. (2011) · RSC Advances · doi:10.1039/c1ra00247c · Cited by 110
Advanced Physical Adsorption Characterization of Nanoporous Carbons
Thommes, M., Cychosz, K. A., & Neimark, A. V. (2012) · Elsevier eBooks · doi:10.1016/b978-0-08-097744-7.00004-1 · Cited by 97
Pachfule, P., Dhavale, V. M., Kandambeth, S., Kurungot, S., & Banerjee, R. (2012) · Chemistry - A European Journal · doi:10.1002/chem.201202940 · Cited by 94
Cao, X., Zheng, B., Rui, X., et al. (2013) · Angewandte Chemie · doi:10.1002/ange.201308013 · Cited by 87
Scardamaglia, M., Alemán, B., Amati, M., Ewels, C. P., Pochet, P., Reckinger, N., Colomer, J., Skaltsas, T., Tagmatarchis, N., Snyders, R., et al. (2014) · Carbon · doi:10.1016/j.carbon.2014.02.078 · Cited by 83
Wang, J., & Liu, Q. (2014) · Nanoscale · doi:10.1039/c3nr05825e · Cited by 82
Lastoskie, C. M. (2010) · Science · doi:10.1126/science.1198066 · Cited by 81
The effect of pyridine modification of Ni–DOBDC on CO 2 capture under humid conditions
Bae, Y., Liu, J., Wilmer, C. E., Sun, H., Dickey, A. N., Kim, M. B., Benin, A. I., Willis, R. R., Barpaga, D., LeVan, M. D., et al. (2014) · Chemical Communications · doi:10.1039/c3cc44954h · Cited by 58
Almasoudi, A., & Mokaya, R. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta00530a · Cited by 43
Petit, C., Wrabetz, S., & Bandosz, T. J. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm34973f · Cited by 33
Deng, H., Jin, S., Zhan, L., Wang, Y., Bao-hua, L. U., Qiao, W., & Ling, L. (2012) · New Carbon Materials · doi:10.1016/s1872-5805(12)60013-4 · Cited by 14
Cited by
Nanoarchitectured Design of Porous Materials and Nanocomposites from Metal‐Organic Frameworks
Kaneti, Y. V., Tang, J., Salunkhe, R. R., Jiang, X., Yu, A., Wu, K. C. ‐., & Yamauchi, Y. (2017) · Advanced Materials · doi:10.1002/adma.201604898 · Cited by 888
Emerging trends in porous materials for CO2capture and conversion
Singh, G., Lee, J., Karakoti, A., Bahadur, R., Yi, J., Zhao, D., AlBahily, K., & Vinu, A. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00075b · Cited by 843
A search for selectivity to enable CO2 capture with porous adsorbents
Oschatz, M., & Antonietti, M. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02110k · Cited by 612
Characterization of the adsorption site energies and heterogeneous surfaces of porous materials
Kumar, K. V., Gadipelli, S., Wood, B., Ramisetty, K. A., Stewart, A. A., Howard, C. A., Brett, D. J. L., & Rodriguez-Reinoso, F. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta00287a · Cited by 384
Self-citationMOF-derived nanoporous carbons with diverse tunable nanoarchitectures
Kim, M., Xin, R., Earnshaw, J., Tang, J., Hill, J. P., Ashok, A., Nanjundan, A. K., Kim, J., Young, C., Sugahara, Y., et al. (2022) · Nature Protocols · doi:10.1038/s41596-022-00718-2 · Cited by 322
Metadata
- Authors
- Gadipelli, S., & Guo, Z. X.
- Venue
- ChemSusChem
- Publisher
- Wiley
- Published
- 2015-04-27
- Volume
- 8
- Issue
- 12
- Pages
- 2123-2132
- ISSN
- 1864-5631 (ISSN-L)
- 1864-564X
- OpenAlex
- W2102966084
- Cited by
- 260
- References
- 89
- FWCI
- 19.94
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.