The DOI matches its Crossref record; 53 of the 53 references it cites were found in a registry or an index.
The Chemistry and Kinetics of Polyethylene Pyrolysis: A Process to Produce Fuels and Chemicals
Abstract
The annual global production of plastics reached 335 million metric tons in 2016. Most waste plastics are landfilled or enter the natural environment in an uncontrolled manner. Pyrolysis can convert waste plastics, such as polyethylene (PE), to smaller hydrocarbons that can be used as fuels or chemicals. In this work, pyrolysis of PE was studied by thermogravimetric analysis (TGA) and in a fluidized‐bed reactor. A kinetic model based on two parallel first‐order random‐scission steps was developed on the basis of the TGA results. PE was pyrolyzed in a fluidized‐bed reactor over the temperature range of 500–600 °C and at residence times of 12.4–20.4 s. The yield of gas‐phase products increased from 8.2 to 56.8 wt %, and the yield of liquid‐phase products decreased from 81.2 to 28.5 wt % as the temperature increased from 500 to 600 °C. Detailed analysis of the gas‐ and liquid‐phase products revealed their potential as precursors for production of fuels and chemicals. Gas‐phase products included hydrogen, C 1–C 4 paraffins, C 2–C 4 olefins, and 1,3‐butadiene. The major liquid‐phase products were mono‐olefins and cycloalkanes/alkadienes with smaller amounts of n‐paraffins, isoparaffins, and aromatics. The carbon‐number distribution of the fluidized‐bed pyrolysis products suggested contributions of nonrandom reactions of random‐scission fragments at low conversion.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A new look at the statistical model identification
Akaike, H. (1974) · IEEE Transactions on Automatic Control · doi:10.1109/tac.1974.1100705 · Cited by 51,879
Model selection and multimodel inference: a practical information-theoretic approach.
Guthery, F. S., Burnham, K. P., & Anderson, D. R. (2003) · The Journal of Wildlife Management · doi:10.2307/3802723 · Cited by 41,495
Production, use, and fate of all plastics ever made
Geyer, R., Jambeck, J. R., & Law, K. L. (2017) · Science Advances · doi:10.1126/sciadv.1700782 · Cited by 18,606
Plastic waste inputs from land into the ocean
Jambeck, J. R., Geyer, R., Wilcox, C., Siegler, T. R., Perryman, M., Andrady, A., Narayan, R., & Law, K. L. (2015) · Science · doi:10.1126/science.1260352 · Cited by 13,163
Odian, G. (2004) · doi:10.1002/047147875x · Cited by 7,158
Review of fast pyrolysis of biomass and product upgrading
Bridgwater, A. V. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.01.048 · Cited by 4,856
Posada, D., & Buckley, T. R. (2004) · Systematic Biology · doi:10.1080/10635150490522304 · Cited by 3,927
Overview of Applications of Biomass Fast Pyrolysis Oil
Czernik, S., & Bridgwater, A. V. (2004) · Energy & Fuels · doi:10.1021/ef034067u · Cited by 2,880
Akaike's Information Criterion in Generalized Estimating Equations
Pan, W. (2001) · Biometrics · doi:10.1111/j.0006-341x.2001.00120.x · Cited by 2,493
Applications and societal benefits of plastics
Andrady, A. L., & Neal, M. A. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0304 · Cited by 2,464
A review on pyrolysis of plastic wastes
Anuar Sharuddin, S. D., Abnisa, F., Wan Daud, W. M. A., & Aroua, M. K. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.037 · Cited by 2,126
Model selection for ecologists: the worldviews of AIC and BIC
Aho, K., Derryberry, D., & Peterson, T. (2014) · Ecology · doi:10.1890/13-1452.1 · Cited by 1,165
Renewable Chemical Commodity Feedstocks from Integrated Catalytic Processing of Pyrolysis Oils
Vispute, T. P., Zhang, H., Sanna, A., Xiao, R., & Huber, G. W. (2010) · Science · doi:10.1126/science.1194218 · Cited by 1,088
Self-citationThermal Degradation of Organic Polymers
Madorsky, S. L. (1964) · Medical Entomology and Zoology · Cited by 869
Techno-economic analysis of biomass fast pyrolysis to transportation fuels
Wright, M. M., Daugaard, D. E., Satrio, J. A., & Brown, R. C. (2010) · Fuel · doi:10.1016/j.fuel.2010.07.029 · Cited by 814
Peterson, J. D., Vyazovkin, S., & Wight, C. A. (2001) · Macromolecular Chemistry and Physics · doi:10.1002/1521-3935(20010301)202:6<775::aid-macp775>3.0.co;2-g · Cited by 774
Akaike's Information Criterion and Recent Developments in Information Complexity
Bozdogan, H. (2000) · Journal of Mathematical Psychology · doi:10.1006/jmps.1999.1277 · Cited by 674
Pyrolysis of municipal plastic wastes for recovery of gasoline-range hydrocarbons
Demirbas, A. (2004) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2004.03.001 · Cited by 579
Polymer degradation and stabilisation
McNeill, I. C. (1986) · Endeavour · doi:10.1016/0160-9327(86)90072-4 · Cited by 547
(2006) · Wiley eBooks · doi:10.1002/0470021543 · Cited by 482
Polymer degradation : principles and practical applications
Schnabel, W. (1981) · Medical Entomology and Zoology · Cited by 458
Mazerolle, M. (2006) · Amphibia-Reptilia · doi:10.1163/156853806777239922 · Cited by 429
Fluidised bed pyrolysis of low density polyethylene to produce petrochemical feedstock
Williams, P. T., & Williams, E. A. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00011-x · Cited by 424
Elements of polymer degradation
Reich, L., & Stivala, S. S. (1971) · Medical Entomology and Zoology · Cited by 400
Fast pyrolysis of biomass and waste plastic in a fluidized bed reactor
Xue, Y., Zhou, S., Brown, R. C., Kelkar, A., & Bai, X. (2015) · Fuel · doi:10.1016/j.fuel.2015.04.033 · Cited by 348
Buekens, A. G., & Huang, H. (1998) · Resources, Conservation and Recycling · doi:10.1016/s0921-3449(98)00025-1 · Cited by 307
Fast pyrolysis of plastic wastes
Scott, D. S., Czernik, S. R., Piskorz, J., & Radlein, D. S. A. G. (1990) · Energy & Fuels · doi:10.1021/ef00022a013 · Cited by 301
Pyrolysis of synthetic polymers and plastic wastes. Kinetic study
Encinar, J. M., & González, J. F. (2008) · Fuel Processing Technology · doi:10.1016/j.fuproc.2007.12.011 · Cited by 274
Butler, E., Devlin, G., & McDonnell, K. (2011) · Waste and Biomass Valorization · doi:10.1007/s12649-011-9067-5 · Cited by 270
Polymer degradation and stabilisation
Camino, G. (1986) · Polymer Degradation and Stability · doi:10.1016/0141-3910(86)90025-x · Cited by 255
Predicting Pyrolysis Products of PE, PP, and PET Using NRTL Activity Coefficient Model
FakhrHoseini, S. M., & Dastanian, M. (2013) · Journal of Chemistry · doi:10.1155/2013/487676 · Cited by 239
Vacuum pyrolysis of PVC I. Kinetic study
Miranda, R., Yang, J., Roy, C., & Vasile, C. (1999) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(98)00186-4 · Cited by 222
(1999) · Fuel and Energy Abstracts · doi:10.1016/s0140-6701(99)96253-7 · Cited by 209
Pyrolysis of Polyethylene in a Fluidized Bed Reactor
Conesa, J. A., Font, R., Marcilla, A., & Garcia, A. N. (1994) · Energy & Fuels · doi:10.1021/ef00048a012 · Cited by 194
Aromatic hydrocarbons formation during coal pyrolysis
Cypres, R. (1987) · Fuel Processing Technology · doi:10.1016/0378-3820(87)90030-0 · Cited by 177
The Role of Sample Dimension and Temperature in Cellulose Pyrolysis
Paulsen, A. D., Mettler, M. S., & Dauenhauer, P. J. (2013) · Energy & Fuels · doi:10.1021/ef302117j · Cited by 160
Kinetic modeling of polyethylene and polypropylene thermal degradation
Ranzi, E., Dente, M., Faravelli, T., Bozzano, G., Fabini, S., Nava, R., Cozzani, V., & Tognotti, L. (1997) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(97)00032-6 · Cited by 143
Truong, T. N. (2000) · The Journal of Chemical Physics · doi:10.1063/1.1287839 · Cited by 108
Kaminsky, W. (1985) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/0165-2370(85)80042-5 · Cited by 104
Hydrodeoxygenation of Pyrolysis Oils
Routray, K., Barnett, K. J., & Huber, G. W. (2016) · Energy Technology · doi:10.1002/ente.201600084 · Cited by 98
Self-citationThe effects of contact time and coking on the catalytic fast pyrolysis of cellulose
Yang, H., Coolman, R., Karanjkar, P. U., Wang, H., Dornath, P., Chen, H., Fan, W., Conner, W. C., Mountziaris, T. J., & Huber, G. W. (2016) · Green Chemistry · doi:10.1039/c6gc02239a · Cited by 84
Self-citationAn improved model for the kinetic description of the thermal degradation of cellulose
Sánchez-Jiménez, P. E., Pérez-Maqueda, L. A., Perejón, A., Pascual‐Cosp, J., Benítez‐Guerrero, M., & Criado, J. M. (2011) · Cellulose · doi:10.1007/s10570-011-9602-3 · Cited by 83
Pure n-hexadecane thermal steam cracking
Depeyre, D., Flicoteaux, C., & Chardaire, C. (1985) · Industrial & Engineering Chemistry Process Design and Development · doi:10.1021/i200031a059 · Cited by 78
Hernández, M. D. R., García, A. N. J., & Marcilla, A. F. (2005) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2005.03.001 · Cited by 77
Robards, M. D., Gould, P. J., & Piatt, J. F. (1997) · Springer series on environmental management · doi:10.1007/978-1-4613-8486-1_8 · Cited by 55
Thermal decomposition and volatilization of poly(α‐olefins)
Seeger, M., & Gritter, R. J. (1977) · Journal of Polymer Science Polymer Chemistry Edition · doi:10.1002/pol.1977.170150610 · Cited by 51
McCaffrey, W. C., Cooper, D. G., & Kamal, M. R. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(98)00036-6 · Cited by 48
Thermal degradation of high density polyethylene in a reactive extruder
Wallis, M. D., & Bhatia, S. K. (2007) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2007.06.002 · Cited by 48
Optimal Production of Light Olefins from Natural Gas via the Methanol Intermediate
Onel, O., Niziolek, A. M., & Floudas, C. A. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b04571 · Cited by 42
Greve, H. (2000) · Ullmann's Encyclopedia of Industrial Chemistry · doi:10.1002/14356007.a23_225 · Cited by 37
Seeger, M., & Cantow, H. ‐. (1975) · Die Makromolekulare Chemie · doi:10.1002/macp.1975.021760515 · Cited by 33
Experimental investigation of corn cob pyrolysis
Ćeranić, M. B., Kosanić, T. R., Djuranović, D., Kaludjerovic, Z., Djuric, S., Gojković, P., & Božičković, R. (2016) · Journal of Renewable and Sustainable Energy · doi:10.1063/1.4966695 · Cited by 30
Kodera, Y., & McCoy, B. J. (2001) · Energy & Fuels · doi:10.1021/ef0100855 · Cited by 26
Cited by
Bioplastics for a circular economy
Rosenboom, J.-G., Langer, R., & Traverso, G. (2022) · Nature Reviews Materials · doi:10.1038/s41578-021-00407-8 · Cited by 2,116
Critical advances and future opportunities in upcycling commodity polymers
Jehanno, C., Alty, J. W., Roosen, M., De Meester, S., Dove, A. P., Chen, E. Y.-X., Leibfarth, F. A., & Sardon, H. (2022) · Nature · doi:10.1038/s41586-021-04350-0 · Cited by 1,325
Expanding plastics recycling technologies: chemical aspects, technology status and challenges
Li, H., Aguirre-Villegas, H. A., Allen, R. D., Bai, X., Benson, C. H., Beckham, G. T., Bradshaw, S. L., Brown, J. L., Brown, R. C., Cecon, V. S., et al. (2022) · Green Chemistry · doi:10.1039/d2gc02588d · Cited by 616
Self-citationPlastic waste to fuels by hydrocracking at mild conditions
Liu, S., Kots, P. A., Vance, B. C., Danielson, A., & Vlachos, D. G. (2021) · Science Advances · doi:10.1126/sciadv.abf8283 · Cited by 583
Pyrolysis technology for plastic waste recycling: A state-of-the-art review
Dai, L., Zhou, N., Lv, Y., Cheng, Y., Wang, Y., Liu, Y., Cobb, K., Chen, P., Lei, H., & Ruan, R. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2022.101021 · Cited by 485
Metadata
- Authors
- Zhao, D., Wang, X., Miller, J. B., & Huber, G. W.
- Venue
- ChemSusChem
- Publisher
- Wiley
- Published
- 2020-02-27
- Volume
- 13
- Issue
- 7
- Pages
- 1764-1774
- ISSN
- 1864-5631 (ISSN-L)
- 1864-564X
- OpenAlex
- W2999371971
- Cited by
- 259
- References
- 53
- FWCI
- 9.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.