Morphological study of biodegradable PEO/PLA block copolymers
The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Abstract
A series of PEO/PLA copolymers, covering a wide range of compositions and segmental lengths, was synthesized, and their morphology was investigated by means of DSC and IR studies. For matrices comprising PEO chains with molecular weights below 3400, no soft‐segment crystallinity was detected. When long hard segments were present, essentially monophasic, semicrystalline polymers were obtained, with PLA blocks melting around 130°C. Polymers containing longer soft segments (PEO 6000) exhibited a two‐phase matrix, with both components being able to crystallize. The relative degree of crystallinity of PEO and PLA blocks was also determined. The thermal history of the sample strongly affected the morphology of the matrix, especially when both blocks were long enough to crystallize. To further explore these polymers, solvent cast films were prepared and their morphology assessed. Casting from acetone, which is an excellent solvent for PLA, resulted in hard blocks exhibiting lower degrees of crystallinity, while methanol had a similar effect on PEO soft segments.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Mandelkern, L. (2004) · Cambridge University Press eBooks · doi:10.1017/cbo9780511535413 · Cited by 1,353
Mandelkern, L., & Keith, H. D. (1964) · Physics Today · doi:10.1063/1.3051751 · Cited by 535
Block copolymers, overview and critical survey
Ceresa, R. J. (1977) · Polymer · doi:10.1016/0032-3861(77)90125-2 · Cited by 438
Hashimoto, T., Shibayama, M., & Kawai, H. (1980) · Macromolecules · doi:10.1021/ma60077a040 · Cited by 418
Experimental methods in polymer chemistry
C.P. (1981) · Journal of Molecular Structure · doi:10.1016/0022-2860(81)80025-7 · Cited by 406
Block Copolymer Theory. III. Statistical Mechanics of the Microdomain Structure
Helfand, E. (1975) · Macromolecules · doi:10.1021/ma60046a032 · Cited by 390
Krause, S. (1972) · Journal of Macromolecular Science, Part C: Polymer Reviews · doi:10.1080/15321797208068166 · Cited by 389
Structure‐property relationships in polycaprolactone‐polyurethanes
Van Bogart, J. W. C., Gibson, P. E., & Cooper, S. L. (1983) · Journal of Polymer Science: Polymer Physics Edition · doi:10.1002/pol.1983.180210106 · Cited by 268
Hollinger, J. O. (1983) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820170107 · Cited by 247
Biodegradable PEO/PLA block copolymers
Cohn, D., & Younes, H. (1988) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820221104 · Cited by 241
Self-citation
Research works printed but not linked: 1
- T. H.Barrows “The design and synthesis of bioabsorbable poly(esteramides) ” 2nd International Conference on Polymers in Medicine Capri Italy June 1985.
Cited by
The controlled intravenous delivery of drugs using PEG-coated sterically stabilized nanospheres
Gref, R., Domb, A., Quellec, P., Blunk, T., Müller, R. H., Verbavatz, J. M., & Langer, R. (1995) · Advanced Drug Delivery Reviews · doi:10.1016/0169-409x(95)00026-4 · Cited by 820
Biodegradable Polymers-A Review on Recent Trends and Emerging Perspectives
Luckachan, G. E., & Pillai, C. K. S. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-011-0317-1 · Cited by 767
Rashkov, I., Manolova, N., Li, S. M., Espartero, J. L., & Vert, M. (1996) · Macromolecules · doi:10.1021/ma950530t · Cited by 371
Designing biodegradable multiblock PCL/PLA thermoplastic elastomers
Cohn, D., & Hotovely Salomon, A. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.07.052 · Cited by 355
Self-citationKissel, T., Li, Y., & Unger, F. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00244-7 · Cited by 332
Castillo, R. V., & Müller, A. J. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.03.002 · Cited by 253
Phase separation in poly(ethylene glycol)/poly(lactic acid) blends
Younes, H., & Cohn, D. (1988) · European Polymer Journal · doi:10.1016/0014-3057(88)90013-4 · Cited by 212
Self-citationChoi, Y. K., Bae, Y. H., & Kim, S. W. (1998) · Macromolecules · doi:10.1021/ma981069i · Cited by 200
Lucke, A., Teßmar, J., Schnell, E., Schmeer, G., & Göpferich, A. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00103-4 · Cited by 177
Fabrication of pliable biodegradable polymer foams to engineer soft tissues
Wake, M. (1996) · Cell Transplantation · doi:10.1016/0963-6897(96)00025-5 · Cited by 158
Tsuji, H. (2013) · Bio‐Based Plastics · doi:10.1002/9781118676646.ch8 · Cited by 142
Biodegradable multiblock PEO/PLA thermoplastic elastomers: molecular design and properties
Cohn, D., & Hotovely, A. (2005) · Polymer · doi:10.1016/j.polymer.2005.01.012 · Cited by 128
Self-citationBiodegradable polyester blends for biomedical application
Zhang, L., Xiong, C., & Deng, X. (1995) · Journal of Applied Polymer Science · doi:10.1002/app.1995.070560114 · Cited by 127
Wan, Y., Chen, W., Yang, J. H., Bei, J., & Wang, S. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00107-8 · Cited by 136
“To date, there have been many reports focused on the synthesis and characterization of block copolymer of l-lactide and poly(ethylene glycol) [9–12] and on their biomedical applications [13,14].”
BackgroundRheological studies of PLLA–PEO–PLLA triblock copolymer hydrogels
Aamer, K. A., Sardinha, H., Bhatia, S. R., & Tew, G. N. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00632-x · Cited by 138
The persistent radical effect in controlled radical polymerizations
Fischer, H. (1999) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/(sici)1099-0518(19990701)37:13<1885::aid-pola1>3.0.co;2-1 · Cited by 352
Hydrogel delivery systems based on polymer blends, block co-polymers or interpenetrating networks
Bae, Y. H., & Kim, S. W. (1993) · Advanced Drug Delivery Reviews · doi:10.1016/0169-409x(93)90029-4 · Cited by 125
Polymerization of lactones, 17. Synthesis of ethylene glycol‐L‐lactide block copolymers
Jedliński, Z., Kurcok, P., Walach, W., Janeczek, H., & Radecka, I. (1993) · Die Makromolekulare Chemie · doi:10.1002/macp.1993.021940616 · Cited by 93
Poly-d,l-lactide–co-poly(ethylene glycol) microspheres as potential vaccine delivery systems
Zhou, S., Liao, X., Li, X., Deng, X., & Li, H. (2003) · Journal of Controlled Release · doi:10.1016/s0168-3659(02)00423-6 · Cited by 92
Wang, L., Peng, Y., Xu, Y., Zhang, J., Zhang, T., Yan, M., & Sun, H. (2022) · Environmental Science & Technology · doi:10.1021/acs.est.2c02221 · Cited by 81
Lins, L. C., Wianny, F., Livi, S., Hidalgo, I. A., Dehay, C., Duchet-Rumeau, J., & Gérard, J.-F. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.6b00820 · Cited by 75
Kutikov, A. B., & Song, J. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.06.013 · Cited by 72
Study on biodegradable aromatic/aliphatic copolyesters
Chen, Y., Tan, L., Chen, L., Yang, Y., & Wang, X. (2008) · Brazilian Journal of Chemical Engineering · doi:10.1590/s0104-66322008000200011 · Cited by 75
“There are numerous studies to understand the relationships between the structure, morphology, mechanical properties, degradability, and processability to meet various requirements in other aspects of reconstructive surgery (Younes and Cohn, 1987; Li et al., 1990).”
BackgroundTanodekaew, S., Pannu, R. K., Heatley, F., Attwood, D., & Booth, C. (1997) · Macromolecular Chemistry and Physics · doi:10.1002/macp.1997.021980402 · Cited by 66
Hydrolytic degradation of PCL/PEO copolymers in alkaline media
Li, S., Chen, X. H., Gross, R. A., & McCarthy, S. P. (2000) · Journal of Materials Science Materials in Medicine · doi:10.1023/a:1008920326988 · Cited by 66
Decontaminating particles exposed to bacterial endotoxin (LPS)
Hitchins, V. M., & Merritt, K. (1999) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(19990905)46:3<434::aid-jbm17>3.0.co;2-l · Cited by 57
Structural analysis and degradation behavior in polyethylene glycol/poly(L‐lactide) copolymers
Hu, D. S., & Liu, H. (1994) · Journal of Applied Polymer Science · doi:10.1002/app.1994.070510310 · Cited by 60
Poly(ethyleneglycol)-Coated Nanospheres: Potential Carriers for Intravenous Drug Administration
Gref, R., Minamitake, Y., Peracchia, M. T., Domb, A. J., Trubetskoy, V. S., Torchilin, V. P., & Langer, R. (2005) · Kluwer Academic Publishers eBooks · doi:10.1007/0-306-46803-4_6 · Cited by 66
“• Polycaprolactone (PCL) (Perret and Skoulios, 1972; Wang and Qiu, 1993;Nair, 1993) • Poly(L-lactic acid) ( Younes and Cohn, 1987; Jedlinski et al., 1993; Liu and Hu, 1993; Pitt et al., 1993; Kricheldorf and Meier-Haack, 1993; Li and Kissel, 1993; Cerrai and Tricoli, 1994) • Poly( DL -lactic acid) (Churchill and Hutch…”
Hajatdoost, S., & Yarwood, J. (1996) · Applied Spectroscopy · doi:10.1366/0003702963905961 · Cited by 58
Vibrational spectroscopy of polymeric biomaterials
Taddei, P., Tinti, A., & Fini, G. (2001) · Journal of Raman Spectroscopy · doi:10.1002/jrs.723 · Cited by 61
New properties from PLA–PEO–PLA hydrogels
Tew, G. N., Sanabria-DeLong, N., Agrawal, S. K., & Bhatia, S. R. (2005) · Soft Matter · doi:10.1039/b509800a · Cited by 51
Fawal, G. F. E. (2014) · Journal of Food Science and Technology · doi:10.1007/s13197-013-1255-9 · Cited by 60
“For this purpose, biodegradable natural polymers such as polysaccharides and protein have been widely used (Younes and Cohn 1987; Jeong et al. 1997; Wijesinghe and You-Jin 2012; Archana et al. 2013; El-Aassar et al. 2013; Moustafa et al. 2013).”
BackgroundPreparation, stability and cytocompatibility of magnetic/PLA-PEG hybrids
Bakandritsos, A., Mattheolabakis, G., Zbořil, R., Bouropoulos, N., Tuček, J., Fatouros, D. G., & Avgoustakis, K. (2010) · Nanoscale · doi:10.1039/b9nr00253g · Cited by 48
Synthetic Biodegradable Polymers for Medical Applications
Suggs, L. J., Moore, S. A., & Mikos, A. G. (2007) · Springer eBooks · doi:10.1007/978-0-387-69002-5_55 · Cited by 56
Conn, D., & Younes, H. (1989) · Biomaterials · doi:10.1016/0142-9612(89)90088-4 · Cited by 45
Self-citationRosa, C. D., Girolamo, R. D., Malafronte, A., Scoti, M., Talarico, G., Auriemma, F., & de Ballesteros, O. R. (2020) · Polymer · doi:10.1016/j.polymer.2020.122423 · Cited by 42
Rosa, C. D., Girolamo, R. D., Auriemma, F., D’Avino, M., Talarico, G., Cioce, C., Scoti, M., Coates, G. W., & Lotz, B. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b00705 · Cited by 38
Thieme, M., Agarwal, S., Wendorff, J. H., & Greiner, A. (2009) · Polymers for Advanced Technologies · doi:10.1002/pat.1617 · Cited by 36
Geschwind, J., Rathi, S., Tonhauser, C., Schömer, M., Hsu, S. L., Coughlin, E. B., & Frey, H. (2013) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201300074 · Cited by 35
PLA Block Polymers: Versatile Materials for a Sustainable Future
Krajovic, D. M., Kumler, M. S., & Hillmyer, M. A. (2025) · Biomacromolecules · doi:10.1021/acs.biomac.5c00161 · Cited by 35
Mishra, M. M., Yadav, M., Sand, A., Tripathy, J., & Behari, K. (2009) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2009.11.009 · Cited by 30
Srivastava, A., & Kumar, R. (2013) · International Journal of Carbohydrate Chemistry · doi:10.1155/2013/892615 · Cited by 25
“For this purpose, biodegradable natural polymers, such as polysaccharides and protein, have been widely used [1, 2].”
BackgroundUretzky, G., Appelbaum, Y. J., Younes, H., Udassin, R., Nataf, P., Baccioglu, E., Pizof, G., Borman, J. B., & Cohn, D. (1990) · Journal of Thoracic and Cardiovascular Surgery · doi:10.1016/s0022-5223(19)35476-5 · Cited by 28
Self-citationPonsart, S., Coudane, J., McGrath, J., & Vert, M. (2002) · Journal of Bioactive and Compatible Polymers · doi:10.1177/088391102030911 · Cited by 24
Design and Synthesis of Different Types of Poly(Lactic Acid)
Albertsson, A., Varma, I. K., Lochab, B., Finne‐Wistrand, A., & Kumar, K. (2010) · Wiley eBooks · doi:10.1002/9780470649848.ch4 · Cited by 33
Drug‐releasing kinetics of MPEG/PLLA block copolymer micelles with different PLLA block lengths
Kim, S. Y., Kim, J. H., Kim, D., An, J. H., Lee, D. S., & Kim, S. C. (2001) · Journal of Applied Polymer Science · doi:10.1002/app.2111 · Cited by 25
Kyu, S., Dukjoon, C., & Kim (2001) · Journal of Applied Polymer Science · doi:10.1002/app.10072 · Cited by 24
Cohn, D., Elchai, Z., Gershon, B., Karck, M., Lazarovici, G., Sela, J., Chandra, M., Marom, G., & Uretzky, G. (1992) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820260909 · Cited by 23
Self-citationBiodegradable PEGylated Microspheres and Nanospheres
Sinha, V. R., Aggarwal, A., & Trehan, A. (2004) · American Journal of Drug Delivery · doi:10.2165/00137696-200402030-00002 · Cited by 25
Verma, S. K., Pandey, V. S., Yadav, M., & Behari, K. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.12.004 · Cited by 21
Tsuji, H. (2002) · Wiley eBooks · doi:10.1002/3527600035.bpol4005 · Cited by 24
Synthesis, characterization and applications of graft copolymer (κ-carrageenan-g-vinylsulfonic acid)
Yadav, M., Sand, A., Mishra, M. M., Tripathy, J., Pandey, V. S., & Behari, K. (2011) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2011.11.018 · Cited by 20
Lam, H. N., Gong, X., & Wu, C. (2007) · The Journal of Physical Chemistry B · doi:10.1021/jp066514n · Cited by 20
Piesowicz, E., Paszkiewicz, S., & Szymczyk, A. (2016) · Polymers · doi:10.3390/polym8070237 · Cited by 22
Steam-exploded residual softwood-filled polypropylene composites
Neus Angl�s, M., Salvad�, J., & Dufresne, A. (1999) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19991121)74:8<1962::aid-app10>3.0.co;2-x · Cited by 101
Srivastava, A., & Behari, K. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.24760 · Cited by 17
Loiola, L. M. D., Más, B. A., Duek, E. A. D. R., & Felisberti, M. I. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.03.034 · Cited by 15
Khoee, S., & Rahimi, H. B. (2010) · Bioorganic & Medicinal Chemistry · doi:10.1016/j.bmc.2010.08.009 · Cited by 13
Zhong, Q., Ren, J., & Wang, Q. (2011) · Polymer Engineering and Science · doi:10.1002/pen.21911 · Cited by 13
New arterial prostheses by filament winding
Gershon, B., Marom, G., & Cohn, D. (1990) · Clinical Materials · doi:10.1016/0267-6605(90)90068-7 · Cited by 12
Self-citationSrivastava, A., & Behari, K. (2007) · Journal of Macromolecular Science Part A · doi:10.1080/10601320601188448 · Cited by 10
Messman, J. M., & Storey, R. F. (2006) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.21764 · Cited by 10
Loiola, L. M. D., Fasce, L. A., da Silva, L. C. E., Gonçalves, M. D. C., Frontini, P. M., & Felisberti, M. I. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.44187 · Cited by 9
DRUG RELEASING CHARACTERISTICS OF PDLLA-MPEG DI- AND MPEG-PDLLA-MPEG TRIBLOCK COPOLYMER MICELLES
HA, T., & KIM, D. (1999) · Journal of Macromolecular Science Part A · doi:10.1081/ma-100101581 · Cited by 10
Shin, H., & Seo, J. (2025) · Sustainable Chemistry and Pharmacy · doi:10.1016/j.scp.2025.102023 · Cited by 13
Mandlule, A., Liu, Y., Schwanz, S., Pieper, Y., Scharf, H., Iskhakova, K., Conceição, A. L. C., Wieland, D. C. F., Zeller-Plumhoff, B., Toma, F. M., et al. (2026) · Materials Advances · doi:10.1039/d5ma00886g · Cited by 6
Thermo-Responsive Biodegradable Hydrogels from Stereocomplexed Poly(lactide)s
Fujiwara, T., Yamaoka, T., & Kimura, Y. (2010) · Springer eBooks · doi:10.1007/978-1-4419-5919-5_9 · Cited by 6
“The ABA triblock copolymer, PLA–PEG–PLA, was prepared in the late 1980s [17–24] and the properties were studied [ 25 , 26], such as degradability [27–31] and drug release [32, 33].”
MethodWaveguide Raman spectroscopy of polymers and polymer laminates
Tait, J. K. F., Dixon, N. M., Everall, N. J., Davies, G. H., McIntyre, R. B., & Yarwood, J. (1993) · Journal of Raman Spectroscopy · doi:10.1002/jrs.1250240807 · Cited by 5
Srivastava, A., Banerjee, J., Srivastava, A., & Behari, K. (2005) · Designed Monomers & Polymers · doi:10.1163/1568555054460079 · Cited by 3
In Vitro Validation of Poly(Ester-Ether-Ester) Block Copolymers as Biomaterials
Guerra, R. S.-D., Cascone, M. G., Tricoli, M., & Cerrai, P. (1993) · Alternatives to Laboratory Animals · doi:10.1177/026119299302100115 · Cited by 3
“A relatively new class of partially resorbable materials, the poly( esterether-ester) block copolymers, appear to be very promising for biomedical applications (1, 2).”
Fujiwara, T. (2012) · ACS symposium series · doi:10.1021/bk-2012-1114.ch017 · Cited by 2
Modification of commercial poly-lactide for extrusion coated food packaging applications
Khajeheian, M. (2015) · Doria (University of Helsinki) · Cited by 1
Rheology and Biocompatibility of Poly(lactide)-poly(ethylene oxide)-poly(lactide) Hydrogels
Agrawal, S. K., Chin, K. S., Sanabria-DeLong, N., Aamer, K. A., Sardinha, H., Tew, G. N., Roberts, S. C., & Bhatia, S. R. (2004) · MRS Proceedings · doi:10.1557/proc-844-y9.8 · Cited by 1
Badami, A. S. (2004) · VTechWorks (Virginia Tech) · Cited by 2
Nakada, Y., & Takahashi, Y. (2000) · Drug Delivery System · doi:10.2745/dds.15.449 · Cited by 1
DESIGN AND SYNTHESIS OF DIFFERENT TYPES OF POLY(LACTIC ACID)/POLYLACTIDE COPOLYMERS
Albertsson, A., Varma, I. K., Lochab, B., Finne‐Wistrand, A., Sahu, S., & Kumar, K. (2022) · Wiley eBooks · doi:10.1002/9781119767480.ch4 · Cited by 2
Babatope, B., Marom, G. A., Cohn, D., & Peleg, H. (2012)
Self-citationSynthesis and application of PLA/PEG block copolymers as anti-cancer drug carriers
Pan, J. (2006) · DR-NTU (Nanyang Technological University) · doi:10.32657/10356/5115
Synthesis and characterization of novel biodegradable thermoplastic elastomers
Widjaja, L. K. (2011) · DR-NTU (Nanyang Technological University) · doi:10.32657/10356/46298
Pereira, F. M. (2020) · Digital Library of Theses and Dissertations (Universidade de São Paulo) · doi:10.11606/t.18.2020.tde-02022021-141212 · Cited by 1
Study and development of electrospun fibers for biotechnology application
Lins, L. C. (2016) · theses.fr (ABES) · doi:10.70675/f22e7a2dze525z4581zb351z012849984f14 · Cited by 1
Metadata
- Authors
- Younes, H., & Cohn, D.
- Affiliations
- Hebrew University of Jerusalem (IL)
- ORCID
- Cohn, Daniel
- Venue
- Journal of Biomedical Materials Research
- Publisher
- Wiley
- Published
- 1987-11
- Volume
- 21
- Issue
- 11
- Pages
- 1301-1316
- ISSN
- 0021-9304 (ISSN-L)
- 1097-4636
- OpenAlex
- W1966492504
- Cited by
- 82
- References
- 30
- Citations by year
- 2025: 3 · 2022: 2 · 2020: 2 · 2016: 5 · 2015: 2 · 2014: 1 · 2013: 5 · 2012: 3
- FWCI
- 1.57
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Biomedical Materials Research (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
- Keywords
- poly(ethylene oxide), polylactic acid, block copolymer morphology, soft segment crystallinity, two-phase morphology, semicrystalline polymers, thermal history effects, solvent casting, biodegradable polymers
- MeSH terms
- Biocompatible Materials, Biodegradation, Environmental, Calorimetry, Differential Scanning, Chemistry, Physical, Lactates, Polyesters, Polyethylene Glycols, Polymers, Spectrophotometry, Infrared, Thermodynamics, Lactic Acid, Chemical Phenomena
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.