The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Preparation and assessment of revised simulated body fluids
Abstract
A simulated body fluid (SBF) with ion concentrations approximately equal to those of human blood plasma has been used widely for in vitro assessment of the bioactivity of artificial materials and for the formation of bone‐like apatite on various substrates. The ion concentrations of a conventional SBF (c‐SBF) are, however, not exactly equal to those of blood plasma. In the present study, a revision of c‐SBF was made to prepare new SBFs (r‐SBF, i‐SBF, and m‐SBF) with ion concentrations equal to or closer to those of blood plasma. The ion concentrations of the r‐SBF and i‐SBF were designed to be equal to those of blood plasma in total and dissociated amounts, respectively. The m‐SBF was designed to have a total ion concentration equal to that of blood plasma, except for the concentration of HCO, which was set to the saturated level with respect to calcite. The ion concentrations and pH of the as‐prepared new SBFs were found to be equal to those of the nominal values. Upon sealed storage, the r‐SBF and i‐SBF showed no change in ion concentrations for up to 4 weeks at 5°C, and up to 2 weeks at 36.5°C, but thereafter they showed a decrease in HCO concentration and an increase in pH. Under the same storage conditions, the c‐SBF and m‐SBF showed no change in ion concentrations and pH values over a period of up to 8 weeks. These results indicate that the r‐SBF and i‐SBF are less stable than the c‐SBF and m‐SBF in terms of changes in ion concentrations relative to storage period. The m‐SBF is optimal for in vitro bioactivity assessment of artificial materials and for biomimetic production of bone‐like apatite. © 2003 Wiley Periodicals, Inc. J Biomed Mater Res 65A: 188–195, 2003
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Solutions able to reproduce in vivo surface‐structure changes in bioactive glass‐ceramic A‐W3
Kokubo, T., Kushitani, H., Sakka, S., Kitsugi, T., & Yamamuro, T. (1990) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820240607 · Cited by 3,836
Self-citationHench, L. L. (1998) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1998.tb02540.x · Cited by 2,652
Plummer, L. N., & Busenberg, E. (1982) · Geochimica et Cosmochimica Acta · doi:10.1016/0016-7037(82)90056-4 · Cited by 1,886
Principles of Bone Biology: By Bilezikian, Raisz and Rodan. Academic Press, London, U.K., 1996
Compston, J. E. (1997) · Clinical Endocrinology · doi:10.1046/j.1365-2265.1997.2431019.x · Cited by 1,370
Bioactive glass ceramics: properties and applications
Kokubo, T. (1991) · Biomaterials · doi:10.1016/0142-9612(91)90194-f · Cited by 1,202
Self-citationTHE CHEMICAL DYNAMICS OF BONE MINERAL
NEUMAN, W. F., & NEUMAN, M. W. (1959) · The American Journal Of The Medical Sciences · doi:10.1097/00000441-195912000-00030 · Cited by 1,032
Ca, P‐rich layer formed on high‐strength bioactive glass‐ceramic A‐W
Kokubo, T., Ito, S., Huang, Z. T., Hayashi, T., Sakka, S., Kitsugi, T., & Yamamuro, T. (1990) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820240306 · Cited by 859
Self-citationChemical anatomy, physiology and pathology of extracellular fluid
Gamble, J. L. (1954) · University Microfilms International eBooks · Cited by 579
Apatite coating on ceramics, metals and polymers utilizing a biological process
Abe, Y., Kokubo, T., & Yamamuro, T. (1990) · Journal of Materials Science Materials in Medicine · doi:10.1007/bf00701082 · Cited by 394
Self-citationSolubility of Ca5{P04)3OH in the System Ca{OH)2-H3P04-H20 at 5, 15, 25, and 37 °C
McDowell, H., Gregory, T. M., & Brown, W. E. (1977) · Journal of Research of the National Bureau of Standards Section A: Physics and Chemistry · doi:10.6028/jres.081a.017 · Cited by 382
Cited by
How useful is SBF in predicting in vivo bone bioactivity?
Kokubo, T., & Takadama, H. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.017 · Cited by 9,576
Self-citationBiomimetic Systems for Hydroxyapatite Mineralization Inspired By Bone and Enamel
Palmer, L. C., Newcomb, C. J., Kaltz, S. R., Spoerke, E. D., & Stupp, S. I. (2008) · Chemical Reviews · doi:10.1021/cr8004422 · Cited by 1,090
Eliaz, N., & Metoki, N. (2017) · Materials · doi:10.3390/ma10040334 · Cited by 1,088
Can bioactivity be tested in vitro with SBF solution?
Bohner, M., & Lemaitre, J. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.01.008 · Cited by 923
Calcium Orthophosphates in Nature, Biology and Medicine
Dorozhkin, S. V. (2009) · Materials · doi:10.3390/ma2020399 · Cited by 823
The role of prenucleation clusters in surface-induced calcium phosphate crystallization
Dey, A., Bomans, P. H. H., Müller, F. A., Will, J., Frederik, P. M., de With, G., & Sommerdijk, N. A. J. M. (2010) · Nature Materials · doi:10.1038/nmat2900 · Cited by 783
Engineering biocompatible implant surfaces
Bauer, S., Schmuki, P., von der Mark, K., & Park, J. (2013) · Progress in Materials Science · doi:10.1016/j.pmatsci.2012.09.001 · Cited by 780
Dorozhkin, S. V. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-1467-8 · Cited by 573
Theoretical analysis of calcium phosphate precipitation in simulated body fluid
Lu, X., & Leng, Y. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.05.034 · Cited by 547
Kannan, M. B., & Raman, R. K. S. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.02.003 · Cited by 545
Mg and Mg alloys: How comparable are in vitro and in vivo corrosion rates? A review
Sanchez, A. H. M., Luthringer, B. J. C., Feyerabend, F., & Willumeit, R. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.11.048 · Cited by 503
Altınoǧlu, E. I., Russin, T. J., Kaiser, J. M., Barth, B. M., Eklund, P. C., Kester, M., & Adair, J. H. (2008) · ACS Nano · doi:10.1021/nn800448r · Cited by 430
Biodegradable Mg and Mg alloys: Corrosion and biocompatibility
Virtanen, S. (2011) · Materials Science and Engineering: B · doi:10.1016/j.mseb.2011.05.028 · Cited by 423
Additively manufactured biodegradable porous magnesium
Li, Y., Zhou, J., Pavanram, P., Leeflang, M. A., Fockaert, L. I., Pouran, B., Tümer, N., Schröder, K.-U., Mol, J. M. C., Weinans, H., et al. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.12.008 · Cited by 396
Electrodeposition of Ca–P coatings on biodegradable Mg alloy: In vitro biomineralization behavior☆
Song, Y., Zhang, S., Li, J., Zhao, C., & Zhang, X. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.12.020 · Cited by 385
Dorozhkin, S. V. (2011) · Biomatter · doi:10.4161/biom.18790 · Cited by 370
Potential biodegradable Zn-Cu binary alloys developed for cardiovascular implant applications
Tang, Z., Niu, J., Huang, H., Zhang, H., Pei, J., Ou, J., & Yuan, G. (2017) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2017.05.013 · Cited by 361
Drouet, C. (2013) · BioMed Research International · doi:10.1155/2013/490946 · Cited by 304
Additively manufactured biodegradable porous iron
Li, Y., Jahr, H., Lietaert, K., Pavanram, P., Yilmaz, A., Fockaert, L. I., Leeflang, M. A., Pouran, B., Gonzalez-Garcia, Y., Weinans, H., et al. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.07.011 · Cited by 299
Mei, D., Lamaka, S. V., Lu, X., & Zheludkevich, M. L. (2020) · Corrosion Science · doi:10.1016/j.corsci.2020.108722 · Cited by 284
Injectable bone cements for use in vertebroplasty and kyphoplasty: State‐of‐the‐art review
Lewis, G. (2006) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.30398 · Cited by 280
Baino, F., & Yamaguchi, S. (2020) · Biomimetics · doi:10.3390/biomimetics5040057 · Cited by 264
Magnesium degradation under physiological conditions – Best practice
Gonzalez, J., Hou, R. Q., Nidadavolu, E. P. S., Willumeit-Römer, R., & Feyerabend, F. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2018.01.003 · Cited by 262
Biodegradable magnesium‐based biomaterials: An overview of challenges and opportunities
Amukarimi, S., & Mozafari, M. (2021) · MedComm · doi:10.1002/mco2.59 · Cited by 258
Effect of age on biomaterial-mediated in situ bone tissue regeneration
Liu, M., Nakasaki, M., Shih, Y.-R. V., & Varghese, S. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.06.035 · Cited by 52
Zhang, Y., Yang, S., Hao, J., Zhang, Y., Chen, Y., & Jia, Z. (2025) · ACS Applied Nano Materials · doi:10.1021/acsanm.5c03079 · Cited by 7
Metadata
- Authors
- Oyane, A., Kim, H., Furuya, T., Kokubo, T., Miyazaki, T., & Nakamura, T.
- Venue
- Journal of Biomedical Materials Research Part A
- Publisher
- Wiley
- Published
- 2003-03-07
- Volume
- 65A
- Issue
- 2
- Pages
- 188-195
- ISSN
- 1549-3296 (ISSN-L)
- 1552-4965
- OpenAlex
- W2014637539
- Cited by
- 1,117
- References
- 23
- FWCI
- 10.25
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.