Load‐bearing biodegradable PCL‐PGA‐beta TCP scaffolds for bone tissue regeneration
Open accessThe DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
A biocompatible and biodegradable scaffold with load‐bearing ability is required to enhance the repair of bone defects by facilitating the attachment, and proliferation of cells, and vascularization during new bone formation. However, it is challenging to maintain the porosity and biodegradability, as well as mechanical properties (especially compressive strength), at the same time. Therefore, in the present work, a biodegradable composite structure of poly(caprolactone) (PCL) was designed using compression molding with varying amounts of poly(glycolic acid) (PGA) (25, 50, 75 wt%) and fixed amount (20 wt%) of beta tricalcium phosphate (beta TCP). It was hypothesized that the fabricated composite structure will develop porosity during the degradation of the PGA and that the corresponding decrease in mechanical properties will be compensated by new bone formation and ingrowth, in vivo. Accordingly, we have systematically studied the effects of sample composition on time‐dependent dissolution and mechanical properties of the PGA/beta TCP scaffolds. The compressive strength increased up to ~92 MPa at 50% compression of the designed PCL‐PGA samples. Furthermore, the dissolution rate, as well as weight loss, was observed to increase with an increase in the PGA amount in PCL. Based on the mechanical properties and dissolution data, it is concluded that the PCL‐PGA scaffolds with beta TCP can be suitable candidates for bone tissue engineering applications, specifically for the reconstruction of bone defects, where strength and biodegradation are both important characteristics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The return of a forgotten polymer—Polycaprolactone in the 21st century
Woodruff, M. A., & Hutmacher, D. W. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.04.002 · Cited by 4,033 · cited 1×
“The faster degradation of PGA (2–5 months 35 ) than PCL, which can take up to 1 year, 36 results in the formation of a porous PCL/beta TCP structure.”
Giannoudis, P. V., Dinopoulos, H., & Tsiridis, E. (2005) · Injury · doi:10.1016/j.injury.2005.07.029 · Cited by 2,078
An Overview of Poly(lactic-co-glycolic) Acid (PLGA)-Based Biomaterials for Bone Tissue Engineering
Gentile, P., Chiono, V., Carmagnola, I., & Hatton, P. (2014) · International Journal of Molecular Sciences · doi:10.3390/ijms15033640 · Cited by 1,593
Orthopaedic applications for PLA‐PGA biodegradable polymers
Athanasiou, K., Agrawal, C., Barber, F., & Burkhart, S. (1998) · Arthroscopy · doi:10.1016/s0749-8063(98)70099-4 · Cited by 487
Cited by
Fabrication of Biomedical Scaffolds Using Biodegradable Polymers.
Kirillova, A., Yeazel, T. R., Asheghali, D., Petersen, S. R., Dort, S., Gall, K., & Becker, M. L. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01200 · Cited by 368
Biomaterials / bioinks and extrusion bioprinting
Chen, X. B., Fazel Anvari-Yazdi, A., Duan, X., Zimmerling, A., Gharraei, R., Sharma, N. K., Sweilem, S., & Ning, L. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2023.06.006 · Cited by 244
Biodegradable polycaprolactone (PCL) based polymer and composites
Archer, E., Torretti, M., & Madbouly, S. (2023) · Physical Sciences Reviews · doi:10.1515/psr-2020-0074 · Cited by 119
Application of PLCL as a biodegradable polymer in biomedical engineering
Zhao, Y., & Liu, H. (2026) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-026-07016-3 · Cited by 7
Metadata
- Authors
- Kumar, A., Mir, M., Aldulijan, I., Mahajan, A., Anwar, A., Leon, C. H., Terracciano, A., Zhao, X., Su, T., Kalyon, D. M., Kumbar, S. G., & Yu, X.
- Venue
- Journal of Biomedical Materials Research Part B: Applied Biomaterials
- Publisher
- Wiley
- Published
- 2020-08-04
- Volume
- 109
- Issue
- 2
- Pages
- 193-200
- ISSN
- 1552-4973 (ISSN-L)
- 1552-4981
- OpenAlex
- W3047613935
- Cited by
- 69
- References
- 4
- FWCI
- 3.10
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Load‐bearing biodegradable PCL‐PGA‐beta TCP scaffolds for bone tissue regeneration. https://app.cochat.ai/papers/10.1002/jbm.b.34691
- The paper
- Kumar, A., Mir, M., Aldulijan, I., Mahajan, A., Anwar, A., Leon, C. H., Terracciano, A., Zhao, X., Su, T., Kalyon, D. M., Kumbar, S. G., & Yu, X. (2021). Load‐bearing biodegradable PCL‐PGA‐beta TCP scaffolds for bone tissue regeneration. Journal of Biomedical Materials Research Part B: Applied Biomaterials. https://doi.org/10.1002/jbm.b.34691
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.