The DOI matches its Crossref record.
Raman spectrum of anatase, TiO 2
Abstract
Raman spectra of anatase have been observed in natural and synthetic crystals. Both crystals show the same spectral features. The Raman band occurring at 516 cm −1 at room temperature is split into two peaks centred at 519 cm −1 and 513 cm −1 at low temperature (73 K). The six Raman active fundamentals predicted by group theory are all observed and assigned. The spectra are analyzed by a simple model considering only short‐range forces and the calculated vibrational frequencies are in good agreement with the observed Raman frequencies.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Raman spectroscopy (Fig. 6) allowed us to identify both anatase [30] and TiO2(B) [31] characteristic vibration modes.”
From Impact of three different TiO2 morphologies on hydrogen evolution by methanol assisted water splitting: Nanoparticles, nanotubes and aerogels (2011) · cites this paper as [30]
Citations
Cites
No references could be resolved yet.
Research works printed but not linked: 18
- Narayanan P. S., 1953, Proc. Indian Acad. Sci., 37, 411, 10.1007/BF03052659 · DOI
- 10.1103/PhysRev.154.522 · DOI
- 10.1103/PhysRev.126.1710 · DOI
- 10.1063/1.1733958 · DOI
- Matossi F., 1951, J. Chem. Phys., 19, 1943
- 10.1016/0375-9601(67)90024-2 · DOI
- 10.1103/PhysRevB.3.3457 · DOI
- 10.1098/rspa.1968.0199 · DOI
- 10.1246/bcsj.49.709 · DOI
- Palance D., 1963, Dana's System of Mineralogy, 583
- Wyckoff R. W. G., 1965, Crystal Structures, 253
- 10.1080/00018736400101051 · DOI
- Shimanouchi T., 1961, J. Chem., 35, 1597
- 10.1016/0022-2852(68)90170-7 · DOI
- 10.1016/S0010-8545(00)80081-8 · DOI
- Turrel G., 1972, Infrared and Raman Spectra of Crystals
- Cromer D. T., 1955, J. Am. Chem. Soc., 7
- Katiyar R. S., 1971, J. Phys., 4, 2421
Cited by
Sorted by citations
Items 601–700 of 1,000
Testoni, G., Chiappim, W., Pessoa, R., Fraga, M. A., Miyakawa, W., Sakane, K., Galvão, N., Vieira, L., & Maciel, H. (2016) · doi:10.1088/0022-3727/49/37/375301 · Cited by 35
Moreno, N., Caballero, Á., Morales, J., & Rodriguez-castellon, E. (2016) · doi:10.1016/j.jpowsour.2016.02.061 · Cited by 35
Benjwal, P., & Kar, K. (2015) · doi:10.1016/j.matchemphys.2015.04.038 · Cited by 35
Nishanthi, S., Iyyapushpam, S., Sundarakannan, B., Subramanian, E., & Padiyan, D. (2014) · doi:10.1016/j.apsusc.2014.06.004 · Cited by 35
Carlucci, C., Xu, H., Scremin, B., Giannini, C., Altamura, D., Carlino, E., Videtta, V., Conciauro, F., Gigli, G., & Ciccarella, G. (2014) · doi:10.1039/c3ce41477a · Cited by 35
Archana, J., Navaneethan, M., & Hayakawa, Y. (2013) · doi:10.1016/j.jpowsour.2013.05.126 · Cited by 35
From Nanorods to Atomically Thin Wires of Anatase TiO2: Nonhydrolytic Synthesis and Characterization
Liu, C., Sun, H., & Yang, S. (2010) · Chemistry - A European Journal · doi:10.1002/chem.200902524 · Cited by 36
Titanium oxide nanostructured films by reactive pulsed laser deposition
Fusi, M., Russo, V., Casari, C., Bassi, A., & Bottani, C. (2009) · doi:10.1016/j.apsusc.2008.06.206 · Cited by 35
Micro‐Raman spectroscopy applied to the study of inclusions within sapphire
Palanza, V., di Martino, D., Paleari, A., Spinolo, G., & Prosperi, L. (2008) · doi:10.1002/jrs.1939 · Cited by 35
A Simple Non‐Aqueous Route to Anatase TiO2
Jiang, D., Xü, Y., Hou, B., Wu, D. Q., & Sun, Y. (2008) · European Journal of Inorganic Chemistry · doi:10.1002/ejic.200700650 · Cited by 41
Rainho, J., Rocha, J., Carlos, L., & Almeida, R. M. (2001) · doi:10.1557/jmr.2001.0325 · Cited by 35
Improving the performances of CsPbBr3 solar cells fabricated in ambient condition
Yuan, B., Li, N., Liu, J., Xu, F., Li, C., Juan, F., Yu, H.-Q., Li, C.-C., & Cao, B.-Q. (2020) · Journal of materials science. Materials in electronics · doi:10.1007/s10854-020-04627-6 · Cited by 34
Bhojanaa, K. B., Ramesh, M., & Pandikumar, A. (2020) · doi:10.1016/j.materresbull.2019.110672 · Cited by 34
Sun, Y., Wang, S., & Zheng, J. (2019) · Journal of Photochemistry and Photobiology. B: Biology · doi:10.1016/j.jphotobiol.2019.02.008 · Cited by 34
Vrakatseli, V., Kalarakis, A., Kalampounias, A., Amanatides, E., & Mataras, D. (2018) · Micromachines · doi:10.3390/mi9080389 · Cited by 34
“The reported active modes of vibrations for the single-crystal anatase TiO2 in the Raman region are 3Eg (144, 198 and 639 cm−1), B1g (399 cm−1), and A1g/B1g (516 cm−1), while the rutile phase exhibits five active modes of vibration: B1g (145 and 243 cm−1), Eg (447 cm−1), A1g (612 cm−1), and B2g (826 cm−1) [21].”
BackgroundSingle-step synthesis of N-doped TiO2 by flame aerosol method and the effect of synthesis parameters
Smirniotis, P., Boningari, T., & Inturi, S. N. R. (2018) · Aerosol Science and Technology · doi:10.1080/02786826.2018.1479059 · Cited by 34
“On the other hand, lower intensity Raman bands near 444 cm 1 of Eg character and near 607 cm 1 corresponding to A1g can be attributed to the rutile phase (Ohsaka et al. 1978; Tian et al. 2008; Lubas et al. 2014).”
BackgroundPham, V., Tran, H. H., Nguyen, S., Thi, C. M., & Hieu, L. V. (2018) · Journal of Materials Science · doi:10.1007/s10853-017-1762-6 · Cited by 34
Yue, J., Suchomski, C., Voepel, P., Ellinghaus, R., Rohnke, M., Leichtweiss, T., Elm, M., & Smarsly, B. (2017) · doi:10.1039/c6ta06840e · Cited by 34
Somsanith, N., Narayanan, T. S. N. S., Kim, Y.-K., Park, I., Bae, T., & Lee, M. (2015) · doi:10.1016/j.apsusc.2015.08.181 · Cited by 34
Photocatalytic activity of needle-like TiO2/WO3−x thin films prepared by chemical vapour deposition
Cabrera, R., Latimer, E. R., Kafizas, A., Blackman, C., Carmalt, C., & Parkin, I. (2012) · doi:10.1016/j.jphotochem.2012.05.002 · Cited by 34
Improvement of performance of dye-sensitized solar cells by doping Er2O3 into TiO2 electrodes
Li, F.-T., & Gu, Y.-Z. (2012) · doi:10.1016/j.mssp.2011.04.008 · Cited by 34
Analysis of multifunctional titanium oxycarbide films as a function of oxygen addition
Chappé, J., Fernandes, A. C., Moura, C., Alves, E., Barradas, N., Martin, N., Espinós, J., & Vaz, F. (2012) · doi:10.1016/j.surfcoat.2011.11.005 · Cited by 34
Warwick, M. E. A., Dunnill, C. W., Goodall, J., Darr, J. A., & Binions, R. (2011) · Thin Solid Films · doi:10.1016/j.tsf.2011.03.028 · Cited by 29
Spectroscopic studies of anatase TiO2 thin films prepared by DC reactive magnetron sputtering
Sério, S., Jorge, M. E. M., Coutinho, M., Hoffmann, S., Limão-Vieira, P., & Nunes, Y. (2011) · doi:10.1016/j.cplett.2011.04.002 · Cited by 34
Surface properties and thermal stability of SiO2-crystalline TiO2 nano-composites
Bonne, M., Pronier, S., Batonneau, Y. X., Can, F., Courtois, X., Royer, S., Marécot, P., & Duprez, D. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm01184c · Cited by 35
A High-Frequency (95 GHz) Electron Paramagnetic Resonance Study of B-doped TiO2 photocatalysts
Fittipaldi, M., Gombac, V., Montini, T., Fornasiero, P., & Graziani, M. (2008) · doi:10.1016/j.ica.2008.03.052 · Cited by 34
Kandasamy, M., Selvaraj, M., Kumarappan, C., & Murugesan, S. (2022) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2022.163743 · Cited by 33
Dalbeth, N., Doyle, A., Billington, K., Gamble, G., Tan, P., Latto, K., Ram, T. P., Narang, R., Murdoch, R., Bursill, D., et al. (2021) · Arthritis & Rheumatology · doi:10.1002/art.42055 · Cited by 33
Han, Q., Zhou, Y.-L., Du, R., Xiao, B., Cheng, J.-B., Zhang, M., Dong, C., Sun, X.-Q., Jiang, F., & Yang, J. (2021) · doi:10.1039/d1ta02753k · Cited by 33
Ma, Z.-L., Jia, Q., Tao, C., & Han, B. (2020) · doi:10.1016/j.seppur.2019.116402 · Cited by 33
Multivalence Charge Transfer in Doped and Codoped Photocatalytic TiO2
Ren, H., Koshy, P., Cao, F., & Sorrell, C. C. (2016) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.6b01200 · Cited by 35
Pd Loaded TiO2 Nanotubes for the Effective Catalytic Reduction of p-Nitrophenol
Kalarivalappil, V., Divya, C., Wunderlich, W., Pillai, S. C., Hinder, S. J., Nageri, M., Kumar, V., & Vijayan, B. K. (2015) · Catalysis Letters · doi:10.1007/s10562-015-1663-8 · Cited by 37
Wang, Y.-J., Zhang, Y.-J., Yu, F.-H., Jin, C., Liu, X., Ma, J.-Y., Wang, Y., Huang, Y.-Y., & Wang, J. (2015) · doi:10.1016/j.cattod.2015.03.022 · Cited by 33
Liu, B., Du, J., Lv, X.-W., Qiu, Y.-L., & Tao, C.-Y. (2015) · doi:10.1039/c4cy01179a · Cited by 33
Influence of gold additives on the stability and phase transformation of titanate nanostructures.
Pusztai, P., Puskas, R., Varga, E., Erdőhelyi, A., Kukovecz, Á., Kónya, Z., & Kiss, J. (2014) · Physical Chemistry, Chemical Physics - PCCP · doi:10.1039/c4cp04084h · Cited by 33
Antony, R. P., Mathews, T., Ajikumar, P. K., Krishna, D. N., Dash, S., & Tyagi, A. (2012) · doi:10.1016/j.materresbull.2012.09.061 · Cited by 33
Nag, M., Ghosh, S., Rana, R., & Manorama, S. (2010) · doi:10.1021/jz101137m · Cited by 33
Characterization of La-Doped TiO2Nanopowders by Raman Spectroscopy
Šćepanović, M., Aškrabić, S., Berec, V., Golubović, A., Dohčević-Mitrović, Z., Kremenović, A., & Popović, Z. (2009) · doi:10.12693/aphyspola.115.771 · Cited by 33
Enhancing the visible-light sensitive photocatalysis of anatase TiO2 through surface-modification
Nimmy, A., Anandakumar, V. M., & Biju, V. (2025) · Discover Materials · doi:10.1007/s43939-025-00180-3 · Cited by 32
Wang, H., Song, L., Yu, L., Xia, X., Bao, Y., Lourenço, M., Homewood, K., & Gao, Y. (2021) · Applications of Surface Science · doi:10.1016/j.apsusc.2021.152202 · Cited by 32
Sboui, M., Lachheb, H., Bouattour, S., Gruttadauria, M., Parola, V. L., Liotta, L., & Boufi, S. (2021) · Environmental Research · doi:10.1016/j.envres.2021.111257 · Cited by 32
Durgam, K., Eppa, R., M.V., R., J, S., & R., S. (2020) · Surface and Interface Analysis · doi:10.1002/sia.6901 · Cited by 32
“denoted that the films are in the anatase phase.(35,36) The Raman modes at 638 (Eg) and 516 cm −1 (A1g, B1g) are the Ti–O stretching vibrations, and modes at 394 (B1g), 196 (Eg) and 144 cm −1 (Eg) are the Ti–O bending vibrations.”
BackgroundKhan, M. I., Sabir, M., Mustafa, G., Fatima, M., Mahmood, A., Abubshait, S., Abubshait, H. A., & Iqbal, M. (2020) · doi:10.1016/j.ceramint.2020.03.256 · Cited by 32
Gu, Z., Chen, L.-Y., Li, X.-Z., Chen, L., Zhang, Y.-Y., & Duan, C.-Y. (2018) · Chemical Science · doi:10.1039/c8sc05450a · Cited by 32
Wu, G., Li, P., Zhu, C.-X., Lei, Y., Zhao, H.-X., Li, T.-T., Yue, H., Dou, B., Gao, Y., & Yang, X.-G. (2017) · doi:10.1016/j.electacta.2017.06.093 · Cited by 32
Lu, D., Fang, P.-F., Ding, J.-Q., Yang, M.-C., Cao, Y.-F., Zhou, Y.-W., Peng, K.-Q., Kondamareddy, K. K., & Liu, M. (2017) · doi:10.1016/j.apsusc.2016.09.022 · Cited by 32
Arango, M. A. T., de Andrade, A. S. V., Cipollone, D. T., Grant, L. O., Korakakis, D., & Sierros, K. A. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b05535 · Cited by 27
Shen, Y., Wang, W.-X., & Xiao, K.-J. (2016) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2016.01.026 · Cited by 32
Wang, C., Liao, J.-Y., Zhao, Y., & Manthiram, A. (2015) · Chemical Communications · doi:10.1039/c4cc07700h · Cited by 34
Phase control of yttrium (Y)-doped TiO2 nanofibers and intensive visible photoluminescence
Kumar, K. S., Song, C.-G., Bak, G., Heo, G., Seong, M., & Yoon, J.-W. (2014) · doi:10.1016/j.jallcom.2014.08.067 · Cited by 32
Carmichael, P., Hazafy, D., Bhachu, D., Mills, A., Darr, J., & Parkin, I. (2013) · Physical Chemistry, Chemical Physics - PCCP · doi:10.1039/c3cp52665h · Cited by 32
Antony, R. P., Mathews, T., Dash, S., & Tyagi, A. (2013) · doi:10.1021/jp400718t · Cited by 32
Kang, M., Ko, Y.-R., Jeon, M.-K., Lee, S.-C., Choung, S., Park, J.-Y., Kim, S., & Choi, S. (2005) · doi:10.1016/j.jphotochem.2004.12.030 · Cited by 32
Mir, A., & Shah, M. A. (2022) · Bulletin of Materials Science · doi:10.1007/s12034-022-02703-7 · Cited by 31
Study of Oxygen Vacancies on Different Facets of Anatase TiO 2
Wu, Y., Fu, Y., Zhang, L., Ren, Y., Chen, X., Yue, B., & He, H. (2019) · Chinese journal of chemistry · doi:10.1002/cjoc.201900188 · Cited by 31
Babu, K. R. V., Renuka, C., Basavaraj, R., Darshan, G. P., & Nagabhushana, H. (2019) · Journal of Rare Earths · doi:10.1016/j.jre.2018.05.019 · Cited by 31
Lupan, O., Postica, V., Ababii, N., Reimer, T., Shree, S., Hoppe, M., Polonskyi, O., Sontea, V., Chemnitz, S., Faupel, F., et al. (2018) · Materials Science in Semiconductor Processing · doi:10.1016/j.mssp.2018.06.031 · Cited by 31
Profili, J., Levasseur, O., Naudé, N., Chanéac, C., Stafford, L., & Gherardi, N. (2016) · doi:10.1063/1.4959994 · Cited by 31
Li, D.-G., Chen, D.-R., Wang, J.-D., & Liang, P. (2016) · doi:10.1016/j.electacta.2016.04.002 · Cited by 31
Tarakeshwar, P., Finkelstein-Shapiro, D., Rajh, T., & Mujica, V. (2011) · doi:10.1002/qua.22889 · Cited by 31
Enhanced photoactivity in bilayer films with buried rutile-anatase heterojunctions.
Romero-Gómez, P., Borrás, A., Barranco, Á., Espinós, J., & González-Elipe, A. (2011) · ChemPhysChem · doi:10.1002/cphc.201000734 · Cited by 31
An X-ray reflectivity study of evaporation-induced self-assembled titania-based films
Henderson, M., Gibaud, A., Bardeau, J., & White, J. (2006) · doi:10.1039/b601677d · Cited by 31
Oh, S. M., Li, J.-G., & Ishigaki, T. (2005) · doi:10.1557/jmr.2005.0070 · Cited by 31
Bornet, A., Moreno‐García, P., Dutta, A., Kong, Y., Liechti, M., Vesztergom, S., Arenz, M., & Broekmann, P. (2024) · ACS Catalysis · doi:10.1021/acscatal.4c05447 · Cited by 33
“57,58 These ex-situ surface characterizations coupled with the ICP-MS findings and the exclusion of bubble accumulation inside the catalyst layer addressed in the previous section demonstrate that the NP-TF-RDE-based galvanostatic stability test fails to determine the true electrocatalyst…”
Highly Stable Self-Cleaning Paints Based on Waste-Valorized PNC-Doped TiO2 Nanoparticles
Maqbool, Q., Favoni, O., Wicht, T., Lasemi, N., Sabbatini, S., Stöger-Pollach, M., Ruello, M., Tittarelli, F., & Rupprechter, G. (2024) · ACS Catalysis · doi:10.1021/acscatal.3c06203 · Cited by 30
Effect of Ag modification on TiO2 and melem/g-C3N4 composite on photocatalytic performances
Michalska, M., Matějka, V., Pavlovský, J., Praus, P., Ritz, M., Serenčíšová, J., Gembalová, L., Kormunda, M., Foniok, K., Reli, M., et al. (2023) · Scientific Reports · doi:10.1038/s41598-023-32094-6 · Cited by 30
Yao, M., Li, L., Yao, T., Wang, D.-Y., Liu, B., & Wang, H.-K. (2022) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2022.166943 · Cited by 30
Kaliyappan, P., Paulus, A., D’Haen, J., Samyn, P., Uytdenhouwen, Y., Hafezkhiabani, N., Bogaerts, A., Meynen, V., Elen, K., Hardy, A. T., et al. (2021) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2021.101468 · Cited by 32
Wang, Z., Wang, X., Wang, H., Chen, X., Dai, W., & Fu, X. (2020) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2020.119169 · Cited by 38
Secundino-Sánchez, O., Díaz-Reyes, J., López, J. A., & Sánchez‐Ramírez, J. F. (2019) · Journal of Molecular Structure · doi:10.1016/j.molstruc.2019.05.092 · Cited by 32
Spin-phonon coupling in uniaxial anisotropic spin-glass based on Fe2TiO5 pseudobrookite
Rodrigues, J. E., Rosa, W. S., Ferrer, M., Cunha, T. R., Zapata, M. J. M., Sambrano, J., Martínez, J., Pizani, P. S., Alonso, J., Hernandes, A., et al. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.05.343 · Cited by 30
Ros, C., Carretero, N. M., David, J., Arbiol, J., Andreu, T., & Morante, J. R. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b05724 · Cited by 40
Wang, F., Shi, R., Lei, Y.-M., Lei, Z., Jiang, R., Wang, D., Liu, Z.-H., & Sun, J. (2019) · CrysteEngComm · doi:10.1039/c8ce01459k · Cited by 30
Chen, J., Ding, T., Cai, J.-M., Wang, Y., Wu, M.-Q., Zhang, H., Zhao, W.-Y., Tian, Y., Wang, X.-T., & Li, X.-G. (2018) · Applications of Surface Science · doi:10.1016/j.apsusc.2018.04.189 · Cited by 30
Padmanabhan, N. T., Jayaraj, M., & John, H. (2018) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2018.08.045 · Cited by 30
Maqbool, Q., & Srivastava, A. (2017) · Chemistry · doi:10.1002/chem.201702343 · Cited by 30
Nevárez-Martínez, M. C., Mazierski, P., Kobylański, M. P., Szczepańska, G., Trykowski, G., Malankowska, A., Kozak, M., Espinoza-Montero, P. J., & Zaleska-Medyńska, A. (2017) · Molecules · doi:10.3390/molecules22040580 · Cited by 30
“which is characteristic of the Raman signature of anatase [76].”
BackgroundHou, H., Gao, F., Shang, M., Wang, L., Zheng, J., Liu, Q., Yang, Z., Xu, J., & Yang, W. (2016) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-016-5990-3 · Cited by 32
Abid, M., Bouattour, S., Conceição, D. S., Ferraria, A. M., Ferreira, L. F. V., do Rego, A. M. B., Vilar, M. R., & Boufi, S. (2016) · RSC Advances · doi:10.1039/c6ra10806g · Cited by 34
Bovine Serum Albumin Adsorption in Mesoporous Titanium Dioxide: Pore Size and Pore Chemistry Effect.
Liu, C., Guo, Y.-H., Hong, Q.-L., Rao, C., Zhang, H.-J., Dong, Y.-H., Huang, L.-L., Lu, X.-H., & Bao, N. (2016) · Langmuir · doi:10.1021/acs.langmuir.5b04496 · Cited by 30
Bukauskas, V., Kaciulis, S., Mezzi, A., Mironas, A., Niaura, G., Rudzikas, M., Šimkienė, I., & Šetkus, A. (2015) · doi:10.1016/j.tsf.2015.04.007 · Cited by 30
Facile one step synthesis of novel TiO2 nanocoral by sol–gel method using Aloe vera plant extract
Venkatesh, K. S., Krishnamoorthi, S. R., Palani, N. S., Thirumal, V., Jose, S. P., Wang, F., & Ilangovan, R. (2014) · Indian Journal of Physics · doi:10.1007/s12648-014-0601-8 · Cited by 31
High energy electron beam irradiated TiO2 photoanodes for improved water splitting
Latthe, S., An, S., Jin, S.-H., & Yoon, S. S. (2013) · doi:10.1039/c3ta13481d · Cited by 30
Kafizas, A., Noor, N., Carmalt, C. J., & Parkin, I. P. (2013) · Journal of Materials Chemistry C · doi:10.1039/c3tc31472c · Cited by 34
Golubović, A., Abramović, B., Šćepanović, M., Grujić-Brojčin, M., Armaković, S. J., Veljković, I., Babic, B., Dohčević-Mitrović, Z., & Popović, Z. (2013) · doi:10.1016/j.materresbull.2012.11.098 · Cited by 30
Visible-Light-Induced Bactericidal Activity of Vanadium-Pentoxide (V2O5)-Loaded TiO2 Nanoparticles
Kim, Y., Song, M.-Y., Park, E., Chin, S.-M., Bae, G., & Jurng, J. (2012) · Applied Biochemistry and Biotechnology · doi:10.1007/s12010-012-9847-9 · Cited by 30
“The peaks centering at 143, 199, 396, 514, and 636 cm were attributed to the anatase phase, while the other peaks, located at 235, 443, 608, and 826 cm, corresponded to the rutile phase [24, 25].”
Tu, Y., Lin, J., Lin, W.-C., Liu, C.-P., Shyue, J., & Su, W.-F. (2012) · doi:10.1039/c2ce25489a · Cited by 30
Zhong, N., Shima, H., & Akinaga, H. (2011) · AIP Advances · doi:10.1063/1.3646525 · Cited by 30
Sun, M.-L., Wu, J., Lu, P., Zhang, Z.-H., Zhang, Y.-F., & Li, D.-J. (2022) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2021.162075 · Cited by 29
Photocatalytic reduction of nitroaromatics into anilines using CeO2-TiO2 nanocomposite
Lu, C., Yin, Z.-F., Sun, C.-J., Chen, C.-D., & Wang, F. (2021) · Molecular Catalysis · doi:10.1016/j.mcat.2021.111775 · Cited by 29
Xiong, H., Zhou, H., Qi, C., Liu, Z., Zhang, L., Zhang, L., & Qiao, Z. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125527 · Cited by 32
Kaur, M., Shinde, S., Ishii, S., Jevasuwan, W., Fukata, N., Yu, M.-W., Li, Y.-X., Ye, J.-H., & Nagao, T. (2020) · ACS Applied Materials and Interfaces · doi:10.1021/acsami.0c03781 · Cited by 29
Xie, X., Hu, Y., Fang, G., Cao, X.-X., Yin, B., Wang, Y., Liang, S., Cao, G., & Pan, A. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta03196k · Cited by 29
Khedr, T. M., El-Sheikh, S., Ismail, A., Kowalska, E., & Bahnemann, D. (2019) · Materials · doi:10.3390/ma12071027 · Cited by 29
“The phonon–ph on i teractions, which may be due to the O-Ti-O bo d vibr tional type, were very obvious in the Eg mode, hence the phonon co finement effects should cause an increase n the shif and asymmetric broadening of Raman peaks [33,34].”
BackgroundInfluentialUV–vis light induced photocatalytic activity of TiO2/graphene oxide nanocomposite coatings
Datcu, A., Mendoza, M., del Pino, Á. P., Logofatu, C., Luculescu, C., & Gyorgy, E. (2019) · Catalysis Today · doi:10.1016/j.cattod.2018.02.026 · Cited by 29
Savva, A., Smith, K. A., Lawson, M., Croft, S., Weltner, A. E., Jones, C., Bull, H., Simmonds, P., Li, L., & Xiong, H. (2018) · Physical Chemistry, Chemical Physics - PCCP · doi:10.1039/c8cp04368j · Cited by 29
Malligavathy, M., Iyyapushpam, S., Nishanthi, S., & Padiyan, D. (2017) · Journal of materials science. Materials in electronics · doi:10.1007/s10854-017-7777-6 · Cited by 29
“Additionally, the peaks observed at around 398, 514 and 638 cm−1 also confirm the anatase phase of TiO2 and are assigned for the modes of B1g, A1g and Eg respectively [17].”
BackgroundWang, Q.-Q., Zhu, S.-L., Liang, Y.-Q., Cui, Z., Yang, X.-J., Liang, C.-Y., & Inoue, A. (2017) · doi:10.1016/j.materresbull.2016.10.026 · Cited by 29
Chen, Q.-Q., Liu, Q.-R., Hubert, J., Huang, W.-D., Baert, K., Wallaert, G., Terryn, H., Delplancke-Ogletree, M., & Reniers, F. (2017) · doi:10.1016/j.surfcoat.2016.12.077 · Cited by 29
Latiff, A., Rusdi, M., Hisyam, M. B., Ahmad, H., & Harun, S. W. (2017) · doi:10.1080/09500340.2016.1220641 · Cited by 29
Metadata
- Authors
- Ohsaka, T., Izumi, F., & Fujiki, Y.
- Venue
- Journal of Raman Spectroscopy
- Publisher
- Wiley
- Published
- 1978-12
- Volume
- 7
- Issue
- 6
- Pages
- 321-324
- ISSN
- 0377-0486 (ISSN-L)
- 1097-4555
- OpenAlex
- W2088149984
- Cited by
- 2,327
- References
- 12
- Citations by year
- 2026: 124 · 2025: 113 · 2024: 113 · 2023: 96 · 2022: 102 · 2021: 121 · 2020: 136 · 2019: 162 · 2018: 152 · 2017: 163 · 2016: 135 · 2015: 123 · 2014: 116 · 2013: 98 · 2012: 101
- FWCI
- 1.90
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Raman Spectroscopy (publishedVersion)
- Topics
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › TiO2 Photocatalysis and Solar Cells
- Life Sciences › Biochemistry, Genetics and Molecular Biology › Biophysics › Spectroscopy Techniques in Biomedical and Chemical Research
- Physical Sciences › Materials Science › Materials Chemistry › Solid-state spectroscopy and crystallography
- Keywords
- anatase, titanium dioxide, Raman spectra, vibrational frequencies
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review