The DOI matches its Crossref record.
Raman spectrum of anatase, TiO 2
Abstract
Raman spectra of anatase have been observed in natural and synthetic crystals. Both crystals show the same spectral features. The Raman band occurring at 516 cm −1 at room temperature is split into two peaks centred at 519 cm −1 and 513 cm −1 at low temperature (73 K). The six Raman active fundamentals predicted by group theory are all observed and assigned. The spectra are analyzed by a simple model considering only short‐range forces and the calculated vibrational frequencies are in good agreement with the observed Raman frequencies.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Raman spectroscopy (Fig. 6) allowed us to identify both anatase [30] and TiO2(B) [31] characteristic vibration modes.”
From Impact of three different TiO2 morphologies on hydrogen evolution by methanol assisted water splitting: Nanoparticles, nanotubes and aerogels (2011) · cites this paper as [30]
Citations
Cites
No references could be resolved yet.
Research works printed but not linked: 18
- Narayanan P. S., 1953, Proc. Indian Acad. Sci., 37, 411, 10.1007/BF03052659 · DOI
- 10.1103/PhysRev.154.522 · DOI
- 10.1103/PhysRev.126.1710 · DOI
- 10.1063/1.1733958 · DOI
- Matossi F., 1951, J. Chem. Phys., 19, 1943
- 10.1016/0375-9601(67)90024-2 · DOI
- 10.1103/PhysRevB.3.3457 · DOI
- 10.1098/rspa.1968.0199 · DOI
- 10.1246/bcsj.49.709 · DOI
- Palance D., 1963, Dana's System of Mineralogy, 583
- Wyckoff R. W. G., 1965, Crystal Structures, 253
- 10.1080/00018736400101051 · DOI
- Shimanouchi T., 1961, J. Chem., 35, 1597
- 10.1016/0022-2852(68)90170-7 · DOI
- 10.1016/S0010-8545(00)80081-8 · DOI
- Turrel G., 1972, Infrared and Raman Spectra of Crystals
- Cromer D. T., 1955, J. Am. Chem. Soc., 7
- Katiyar R. S., 1971, J. Phys., 4, 2421
Cited by
Sorted by citations
Items 801–900 of 1,000
Chang, S., Wang, Q.-B., Liu, B., Sang, Y.-H., & Liu, H. (2017) · Catalysis Science & Technology · doi:10.1039/c6cy02150f · Cited by 25
Kim, K., Kyeong, M.-C., Kim, D. W., Kim, S. J., Choi, J., Bae, S.-J., Park, S., & Jung, H.-T. (2016) · ACS Applied Materials and Interfaces · doi:10.1021/acsami.5b11458 · Cited by 25
Yue, J., Suchomski, C., Brezesinski, T., & Smarsly, B. M. (2015) · ChemNanoMat · doi:10.1002/cnma.201500078 · Cited by 26
Effect of holmium doping on the structure and photocatalytic behavior of TiO2-based nanosheets
Liu, X., Fang, P.-F., Liu, Y., Liu, Z., Lu, D., Gao, Y., Chen, F.-T., Wang, D.-H., & Dai, Y. (2014) · Journal of Materials Science · doi:10.1007/s10853-014-8514-7 · Cited by 25
“The main Eg mode at 141 cm -1 is arising from the external vibration of the anatase structure [30].”
BackgroundZhang, L., Han, M., Tan, O. K., Tse, M. S., Wang, Y. X., & Sze, C. C. (2012) · Journal of Materials Chemistry B · doi:10.1039/c2tb00113f · Cited by 30
Schattauer, S., Reinhold, B., Albrecht, S., Fahrenson, C., Schubert, M., Janietz, S., & Neher, D. (2012) · Colloid & Polymer Science · doi:10.1007/s00396-012-2708-9 · Cited by 18
Synthesis and characterization of CdS doped TiO2 nanocrystalline powder: A spectroscopic study
Thakur, P., Chadha, R., Biswas, N., Sarkar, S., Mukherjee, T., Joshi, S., & Kapoor, S. (2012) · doi:10.1016/j.materresbull.2012.03.032 · Cited by 25
Panjawi, N., Naik, A., Warwick, M. E. A., Hyett, G., & Binions, R. (2012) · doi:10.1002/cvde.201106973 · Cited by 25
On the mechanism of enhanced photocatalytic activity of composite TiO2/carbon nanofilms
Sellappan, R., Galeckas, A., Venkatachalapathy, V., Kuznetsov, A., & Chakarov, D. (2011) · doi:10.1016/j.apcatb.2011.05.036 · Cited by 25
Sellappan, R., Zhu, J.-F., Fredriksson, H., Martins, R. D. S., Zäch, M., & Chakarov, D. (2011) · doi:10.1016/j.molcata.2010.11.025 · Cited by 25
Study of the occurrence of titanium in kaolinites by micro-Raman spectroscopy
Shoval, S., Panczer, G., & Boudeulle, M. (2008) · doi:10.1016/j.optmat.2007.11.012 · Cited by 25
Resistance Switching in Anodic Oxidized Amorphous TiO2Films
Liang, C., Terabe, K., Hasegawa, T., & Aono, M. (2008) · Applied Physics Express · doi:10.1143/apex.1.064002 · Cited by 24
Improved photoactivity of TiO2 photoanode of dye-sensitized solar cells by sulfur doping
Salim, L., Muzakkar, M. Z., Zaeni, A., Maulidiyah, M., Nurdin, M., Sadikin, S. N., Ridwan, J., & Umar, A. (2023) · Journal of Physics and Chemistry of Solids · doi:10.1016/j.jpcs.2023.111224 · Cited by 24
Joshi, P., Tiwari, S., Punia, K., & Kumar, S. (2022) · Optical materials (Amsterdam) · doi:10.1016/j.optmat.2022.112778 · Cited by 24
Komaraiah, D., Radha, E., Sivakumar, J., Reddy, M. V. R., & Sayanna, R. (2021) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2021.159109 · Cited by 27
In Situ TiO2-rGO Nanocomposite for Low Concentration NO Gas Sensor
Kuchi, C., Naresh, B., & Reddy, P. (2021) · doi:10.1149/2162-8777/abeff0 · Cited by 24
Lashkov, A. V., Fedorov, F., Vasilkov, M., Kochetkov, A. V., Belyaev, I. V., Plugin, I. A., Varezhnikov, A., Filipenko, A. N., Romanov, S., Nasibulin, A., et al. (2020) · doi:10.1016/j.snb.2019.127615 · Cited by 24
Zeng, Q.-Y., Gao, Y.-W., Lyu, L., Chang, S., & Hu, C. (2018) · Nanoscale · doi:10.1039/c8nr03122c · Cited by 24
Surface characterization of titanium implant healing abutments before and after placement
Wheelis, S., Wilson, T., Valderrama, P., & Rodrigues, D. (2018) · Clinical Implant Dentistry and Related Research · doi:10.1111/cid.12566 · Cited by 24
Ag@Nb2O5 plasmonic blocking layer for higher efficiency dye-sensitized solar cells.
Suresh, S., Unni, G. E., Satyanarayana, M., Nair, A. S., & Pillai, V. P. M. (2018) · Dalton Transactions · doi:10.1039/c7dt04825d · Cited by 24
Urea Decomposition in Selective Catalytic Reduction on V2O5/WO3/TiO2 Catalyst in Diesel Exhaust
Goldbach, M., Roppertz, A., Langenfeld, P., Wackerhagen, M., Füger, S., & Kureti, S. (2017) · doi:10.1002/ceat.201700261 · Cited by 24
Lionello, D., Steinberg, P. Y., Zalduendo, M. M., Soler-Illia, G. J. A. A., Angelomé, P., & Fuertes, M. (2017) · doi:10.1021/acs.jpcc.7b09054 · Cited by 24
Effect of etching on the composition and structure of anodic spark deposition films on titanium
Marin, E., Diamanti, M. V., Boffelli, M., Sendoh, M., Pedeferri, M., Mazinani, A., Moscatelli, M., Curto, B. D., Zhu, W., Pezzotti, G., et al. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.06.088 · Cited by 29
Wu, M., Chang, I.-C., Hsiao, K., & Huang, W.-K. (2016) · doi:10.1016/j.jtice.2016.02.026 · Cited by 24
Gautam, S., Das, A., Ojha, S., Shukla, D., Phase, D. M., & Singh, F. (2016) · Physical Chemistry, Chemical Physics - PCCP · doi:10.1039/c5cp07287e · Cited by 24
Competition and Coexistence of Raman and Random Lasing in Silica‐/Titania‐Based Solid Foams
Gaikwad, P., Bachelard, N., Sebbah, P., Backov, R., & Vallée, R. (2015) · doi:10.1002/adom.201500247 · Cited by 24
Ultrathin Au nanowires supported on rGO/TiO 2 as an efficient photoelectrocatalyst
Annamalai, L., Madras, G., & Ravishankar, N. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03988f · Cited by 32
Kadam, R., Rajeswari, B., Sengupta, A., Achary, S. N., Kshirsagar, R. J., & Natarajan, V. (2015) · Spectrochimica Acta Part A - Molecular and Biomolecular Spectroscopy · doi:10.1016/j.saa.2014.08.082 · Cited by 24
Pan, F., Wu, K., Li, H.-X., Xu, G.-Q., & Chen, W. (2014) · Chemistry · doi:10.1002/chem.201403866 · Cited by 24
Nithiyanantham, U., Ramadoss, A., & Kundu, S. (2014) · doi:10.1039/c4ra06226d · Cited by 24
Rousaki, A., Bellelli, C., Calatayud, M. C., Aldazábal, V., Custo, G., Moens, L., Vandenabeele, P., & Vázquez, C. (2014) · doi:10.1002/jrs.4723 · Cited by 24
Anatase TiO2 hollow nanosheets: dual roles of F−, formation mechanism, and thermal stability
Shi, Q.-Q., Li, Y., Zhan, E.-S., Ta, N., & Shen, W.-J. (2014) · doi:10.1039/c3ce42580k · Cited by 24
Microstructural and tribological study of Nd:YAG laser treated titanium plates
de Lucas, M. D., Lavisse, L., & Pillon, G. (2008) · doi:10.1016/j.triboint.2008.03.007 · Cited by 24
“The bands at 142, 195, 400, 529 and 639cm can be assigned to the anatase TiO2 phase [20,21], while those placed at 235, 450 and 610cm correspond to the rutile TiO2 phase [20].”
BackgroundZhang, H.-R., Xie, C., Zhang, Y.-F., Liu, G.-F., Li, Z., Liu, C., Ma, X.-P., & Zhang, W.-F. (2008) · doi:10.1063/1.2924341 · Cited by 24
Li, J.-G., Ikeda, M., Tang, C.-C., Moriyoshi, Y., Hamanaka, H., & Ishigaki, T. (2007) · doi:10.1021/jp077320q · Cited by 24
Beyzawi, M. A., & Boroujerdnia, M. (2024) · Ceramics International · doi:10.1016/j.ceramint.2024.09.376 · Cited by 23
Diego-Rucabado, A., Merino-Garcia, I., Espeso, J., González, J., Arce, B., Valiente, R., Beobide, G., Cano, I., Martín-Rodríguez, R., de Pedro, I., et al. (2023) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.3c01925 · Cited by 23
Suriya, P., Prabhu, M., & Jagannathan, K. (2022) · Materials Today: Proceedings · doi:10.1016/j.matpr.2022.05.138 · Cited by 23
Zhan, J., Chen, H.-Y., Zhou, H.-J., Hao, L., Xu, H., & Zhou, X.-H. (2021) · Applied Clay Science · doi:10.1016/j.clay.2021.106296 · Cited by 23
Chodun, R., Dypa, M., Wicher, B., Nowakowska-Langier, K., Okrasa, S., Minikayev, R., & Zdunek, K. (2021) · Applications of Surface Science · doi:10.1016/j.apsusc.2021.151597 · Cited by 23
Kubeš, M., Leichmann, J., Wertich, V., Mozola, J., Holá, M., Kanický, V., & Škoda, R. (2021) · Chemical Geology · doi:10.1016/j.chemgeo.2021.120593 · Cited by 23
Lee, W.-J., Wu, Y.-T., Liao, Y.-W., & Liu, Y.-T. (2020) · Nanomaterials · doi:10.3390/nano10091710 · Cited by 23
Hybrid 1D/2D Carbon Nanostructure-Incorporated Titania Photoanodes for Perovskite Solar Cells
Amini, A., Abdizadeh, H., & Golobostanfard, M. R. (2020) · doi:10.1021/acsaem.0c00200 · Cited by 23
Vrakatseli, V., Farsari, E., & Mataras, D. (2020) · Micromachines · doi:10.3390/mi11060616 · Cited by 23
“Rutile or anatase structure is identified by the Raman active phonon modes in the visible range at 447 cm−1 (Eg) and 610 cm−1 (A1g) and 399 cm−1 (B1g), 519 cm−1 (A1g/B1g) and 639 cm−1 (Eg) respectively [28,29].”
BackgroundCrO assembled at the oxygen vacancies on black-TiO2 for NO oxidation
Meng, F., Zhang, S.-L., Li, X.-H., Zeng, Y.-Q., & Zhong, Q. (2019) · Molecular Catalysis · doi:10.1016/j.mcat.2019.110393 · Cited by 23
Ghosh, S., & Nambissan, P. M. G. (2019) · Journal of Solid State Chemistry · doi:10.1016/j.jssc.2019.04.010 · Cited by 23
Prajapati, B., Roy, S., Sharma, S., Joshi, A. G., Chatterjee, S., & Ghosh, A. (2019) · physica status solidi (b) · doi:10.1002/pssb.201800262 · Cited by 23
Hong, X., Kang, Y., Zhen, C., Kang, X., Yin, L., Irvine, J. T. S., Wang, L., Liu, G., & Cheng, H. (2018) · Science China Materials · doi:10.1007/s40843-018-9234-y · Cited by 25
“Anatase TiO2 has six Raman active modes, 3Eg + 2B1g + A1g,[30] where one of the two B1g modes is hard to distinguish from the A1g mode at around 515 cm -1 (Fig.”
BackgroundChen, L., Qu, Y., Yang, X., Liao, B., Xue, W., & Cheng, W. (2017) · doi:10.1016/j.matchemphys.2017.08.013 · Cited by 23
Jithin, M., Saravanakumar, K., Ganesan, V., Reddy, V., Razad, P. M., Patidar, M., Jeyadheepan, K., Marimuthu, G., Sreelakshmi, V., & Mahalakshmi, K. (2017) · doi:10.1016/j.spmi.2017.04.046 · Cited by 23
Gautam, S., Das, A., Singh, R. G., Kumar, V., & Singh, F. (2016) · doi:10.1063/1.4971250 · Cited by 23
Evolution of anatase surface active sites probed by in situ sum-frequency phonon spectroscopy
Cao, Y., Chen, S.-Y., Li, Y., Gao, Y., Yang, D., Shen, Y., & Liu, W.-T. (2016) · Science Advances · doi:10.1126/sciadv.1601162 · Cited by 23
Reddy, Y. A. K., Kang, I.-K., Shin, Y. B., Lee, H. C., & Reddy, P. S. (2015) · Materials Science in Semiconductor Processing · doi:10.1016/j.mssp.2014.12.080 · Cited by 30
Meng, X.-H., & Deng, D. (2015) · ACS Applied Materials and Interfaces · doi:10.1021/acsami.5b00492 · Cited by 23
Giannouri, M., Kalampaliki, T., Todorova, N., Giannakopoulou, T., Boukos, N., Petrakis, D., Vaimakis, T., & Trapalis, C. (2013) · doi:10.1155/2013/729460 · Cited by 23
“Thus, the Raman lines of the anatase phase [53] at 144 cm (E g mode), 197 cm (E g mode), 399 cm (B 1g mode),”
BackgroundControlled synthesis of anatase TiO2 octahedra with enhanced photocatalytic activity
Gai, L., Mei, Q.-H., Qin, X., Li, W.-P., Jiang, H., & Duan, X.-Q. (2013) · doi:10.1016/j.materresbull.2013.07.057 · Cited by 23
Madarász, D., Pótári, G., Sápi, A., László, B., Csudai, C., Oszkó, A., Kukovecz, Á., Erdőhelyi, A., Kónya, Z., & Kiss, J. (2013) · Physical Chemistry, Chemical Physics - PCCP · doi:10.1039/c3cp51502h · Cited by 23
Photocatalytic degradation of the herbicide iodosulfuron by neodymium or nitrogen doped TiO2
Kralchevska, R., Milanova, M., Tišler, T., Pintar, A., Tyuliev, G., & Todorovsky, D. (2012) · doi:10.1016/j.matchemphys.2012.02.025 · Cited by 23
TiO2- and CeO2-Based Biphasic Core–Shell Nanoparticles with Tunable Core Sizes and Shell Thicknesses
Correa, D. N., Silva, J. M. D. S. E., Santos, E. D. B., Sigoli, F., Souza, A. G., & Mazali, I. (2011) · doi:10.1021/jp200540g · Cited by 23
Phase transformation at the surface of TiO2 single crystal irradiated by femtosecond laser pulse
Yang, J., Ma, H.-L., Ma, G.-H., Lu, B., & Ma, H.-L. (2007) · doi:10.1007/s00339-007-4089-3 · Cited by 23
Structural transformations in nanocrystalline anatase TiO2 films upon annealing in air
Orendorz, A., Brodyanski, A., Lösch, J., Bai, L., Chen, Z.-H., Le, Y., Ziegler, C., & Gnaser, H. (2006) · doi:10.1016/j.susc.2005.12.083 · Cited by 23
Brevet, A., Fabreguette, F., Imhoff, L., de Lucas, M. C. M., Heintz, O., Saviot, L., Sacilotti, M., & Bourgeois, S. (2002) · doi:10.1016/s0257-8972(01)01586-9 · Cited by 23
Carbon-Coated TiO2 Nanoparticles for Noble-Metal-Free Photocatalytic H2 Production from H2O
Deligiannakis, Y., Bletsa, E., Mouzourakis, E., Solakidou, M., & Adamska, K. (2024) · ACS Applied Nano Materials · doi:10.1021/acsanm.4c01150 · Cited by 22
Lupan, O., Magariu, N., Santos-Carballal, D., Ababii, N., Offermann, J., Pooker, P., Hansen, S., Siebert, L., de Leeuw, N. D., & Adelung, R. (2023) · ACS Applied Materials and Interfaces · doi:10.1021/acsami.3c03564 · Cited by 22
Investigation of the annealing treatment on the performance of TiO2 photoanode
Zhang, S.-Q., Zhang, X., Sun, Y., Zhou, W., Cao, W.-M., & Cheng, D. (2023) · International journal of hydrogen energy · doi:10.1016/j.ijhydene.2023.04.196 · Cited by 22
Maldonado-Larios, L., Mayen-Mondragon, R., Martínez-Orozco, R. D., Páramo-García, U., Gallardo-Rivas, N. V., & García-Alamilla, R. (2020) · Synthetic metals · doi:10.1016/j.synthmet.2020.116464 · Cited by 22
Graphene hybridized high energy faceted titanium dioxide for transparent self-cleaning coatings
Padmanabhan, N. T., Jayaraj, M., & John, H. (2020) · doi:10.1016/j.cattod.2019.09.029 · Cited by 22
Effect of proton irradiation on anatase TiO2 nanotube anodes for lithium-ion batteries
Smith, K. A., Savva, A., Mao, K.-Y. S., Wang, Y.-Q., Tenne, D., Chen, D., Liu, Y.-Z., Barnes, P., Deng, C., Butt, D., et al. (2019) · Journal of Materials Science · doi:10.1007/s10853-019-03825-w · Cited by 22
Ababii, N., Hoppe, M., Shree, S., Vahl, A., Ulfa, M., Pauporté, T., Viana, B., Crețu, V., Magariu, N., Postica, V., et al. (2019) · Sensors and Actuators A-Physical · doi:10.1016/j.sna.2019.04.017 · Cited by 22
Yang, M.-C., Lu, D., Wang, H.-M., Wu, P., & Fang, P.-F. (2019) · Applications of Surface Science · doi:10.1016/j.apsusc.2018.10.153 · Cited by 22
Riad, K. B., Wood-Adams, P., & Wegner, K. (2018) · Materials research bulletin · doi:10.1016/j.materresbull.2018.06.017 · Cited by 22
Ran, P., Jiang, L., Li, X., Zuo, P., Li, B., Li, X., Cheng, X., Zhang, J., & Lu, Y. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta04198a · Cited by 31
Suresh, S., Unni, G. E., Satyanarayana, M., Nair, A. S., & Pillai, V. P. M. (2018) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2018.03.086 · Cited by 22
Jamal, H., Kang, B.-S., Lee, H., Yu, J.-S., & Lee, C.-S. (2018) · Journal of Industrial & Engineering Chemistry · doi:10.1016/j.jiec.2018.03.012 · Cited by 22
Diagnostics of Plasma Behavior and TiO2 Properties Based on DBD/TiO2 Hybrid System
Lu, N., Hui, Y., Shang, K.-F., Jiang, N., Li, J., & Wu, Y. (2018) · Plasma chemistry and plasma processing · doi:10.1007/s11090-018-9919-x · Cited by 22
Schipporeit, S., & Mergel, D. (2018) · Journal of Raman Spectroscopy · doi:10.1002/jrs.5369 · Cited by 22
Optical anisotropy in vertically oriented TiO2 nanotube arrays
Zhang, Y., Farsinezhad, S., Wiltshire, B. D., Kisslinger, R., Kar, P., & Shankar, K. (2017) · Nanotechnology · doi:10.1088/1361-6528/aa7d9d · Cited by 22
Yang, X.-Y., Zhang, M.-J., Min, Y., Xu, M., Mei, Z., Liang, J., Hu, J.-T., Yuan, S., Xiao, S., Duan, Y.-D., et al. (2017) · ACS Applied Materials and Interfaces · doi:10.1021/acsami.7b06792 · Cited by 22
Smith, J. P., Smith, F., Ottaway, J., Krull-Davatzes, A. E., Simonson, B., Glass, B., & Booksh, K. (2017) · Applied Spectroscopy · doi:10.1177/0003702816687573 · Cited by 22
“On the basis of factor group analysis, 15 optical modes are expected for anatase, with a distribution of 1⁄4 1A1gþ 1A2uþ 2B1gþ 1B2uþ 3Egþ 2Eu.(65,66) The Raman active modes of anatase are A1g, B1g, and Eg, 67 and they are observed at the following wavenumbers: 145 cm 1 (Eg), 396 cm 1 (B1g), 513 cm 1 (A1g), and 637 cm…”
BackgroundA hybridization approach to efficient TiO2 photodegradation of aqueous benzalkonium chloride
Sasikala, S. P., Carleer, R., Ananthakumar, S., & Yperman, J. (2015) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2015.03.011 · Cited by 22
Hamdi, A., Ferraria, A., Rego, A., Ferreira, D., Conceição, D., Ferreira, L. V. V., & Bouattour, S. (2013) · doi:10.1016/j.molcata.2013.09.005 · Cited by 22
Ricci, P. C., Carbonaro, C. M., Lehmann, A. G., Congiu, F., Puxeddu, B., Cappelletti, G., & Spadavecchia, F. (2013) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.01.164 · Cited by 23
Mattsson, A., Lejon, C., Bakardjieva, S., Štengl, V., & Österlund, L. (2013) · doi:10.1016/j.jssc.2012.12.018 · Cited by 22
Tavares, C., Castro, M. F. F. V., Marins, E., Samantilleke, A., Ferdov, S., Rebouta, L., Benelmekki, M., Cerqueira, M., Alpuim, P., Xuriguera, E., et al. (2012) · doi:10.1016/j.tsf.2011.10.031 · Cited by 22
Luminescence properties of sol–gel-derived TiO2:Sm powder
Kiisk, V., Reedo, V., Sild, O., & Sildos, I. (2009) · doi:10.1016/j.optmat.2008.10.016 · Cited by 22
Preparation and Raman Spectrum of Rutile Single Crystals Using Floating Zone Method
Guo, X.-Y., Xu, D.-P., Ding, Z., & Su, W. (2006) · doi:10.1088/0256-307x/23/6/080 · Cited by 22
Portela, C. I., Vieira, N. C., Brazil, T. R., Soares, A. G., Gabriel, J., & Gonçalves, M. (2024) · Environmental Research · doi:10.1016/j.envres.2024.120311 · Cited by 21
Morante, N., Tammaro, O., Albarano, L., Guglielmo, L. D., Oliva, N., Sacco, O., Mancuso, A., Castellino, M., Sannino, D., Femia, N., et al. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.149175 · Cited by 23
Nimmy, A. V., Mahesh, A., Anandakumar, V. M., & Biju, V. (2023) · Journal of Physics and Chemistry of Solids · doi:10.1016/j.jpcs.2023.111774 · Cited by 21
Sadeghi, S., Vaezi, M., Kazemzadeh, A., & Jamjah, R. (2021) · doi:10.1016/j.mseb.2021.115254 · Cited by 21
Solid-phase impregnation promotes Ce doping in TiO2 for boosted denitration of CeO2/TiO2 catalysts
Song, W., Ji, J.-W., Guo, K., Wang, X., Wei, X., Cai, Y.-D., Tan, W., Li, L., Sun, J.-F., Tang, C.-J., et al. (2021) · Chinese Chemical Letters · doi:10.1016/j.cclet.2021.07.022 · Cited by 21
Khaldi, O., Majouri, A., & Larbi, T. (2021) · Applied Physics A · doi:10.1007/s00339-021-04721-4 · Cited by 21
Grao, M., Ratova, M., & Kelly, P. J. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.126641 · Cited by 28
Doyle, P. J., Ang, C., Snead, L., Katoh, Y., Terrani, K., & Raiman, S. (2021) · doi:10.1016/j.jnucmat.2020.152695 · Cited by 21
Synthesis of N-Doped TiO2 with good photocatalytic property
Li, G., Zou, B., Feng, S., Shi, H.-L., Liao, K.-T., Wang, Y., Wang, W.-Z., & Zhang, G.-L. (2020) · doi:10.1016/j.physb.2020.412184 · Cited by 21
Saito, K., Yi, E., Laine, R. M., & Sugahara, Y. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.09.094 · Cited by 23
Carbon-based artificial SEI layers for aqueous lithium-ion battery anodes
Subramanya, U., Chua, C., Leong, V. G. H., Robinson, R., Cabiltes, G. A. C., Singh, P., Yip, B., Bokare, A., Erogbogbo, F., & Oh, D. (2020) · RSC Advances · doi:10.1039/c9ra08268a · Cited by 21
Photocatalytic activity of exfoliated graphite-TiO2 nanoparticle composites.
Guidetti, G., Pogna, E. A. A., Lombardi, L., Tomarchio, F., Polishchuk, I., Joosten, R. R. M., Ianiro, A., Soavi, G., Sommerdijk, N., Friedrich, H., et al. (2019) · Nanoscale · doi:10.1039/c9nr06760d · Cited by 21
Recent progress in characterization of the core–shell structure of black titania
Tian, M., Liu, C.-Z., Ge, J.-X., Geohegan, D., Duscher, G., & Eres, G. (2019) · Journal of Materials Research · doi:10.1557/jmr.2019.46 · Cited by 21
Metadata
- Authors
- Ohsaka, T., Izumi, F., & Fujiki, Y.
- Venue
- Journal of Raman Spectroscopy
- Publisher
- Wiley
- Published
- 1978-12
- Volume
- 7
- Issue
- 6
- Pages
- 321-324
- ISSN
- 0377-0486 (ISSN-L)
- 1097-4555
- OpenAlex
- W2088149984
- Cited by
- 2,327
- References
- 12
- Citations by year
- 2026: 124 · 2025: 113 · 2024: 113 · 2023: 96 · 2022: 102 · 2021: 121 · 2020: 136 · 2019: 162 · 2018: 152 · 2017: 163 · 2016: 135 · 2015: 123 · 2014: 116 · 2013: 98 · 2012: 101
- FWCI
- 1.90
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Raman Spectroscopy (publishedVersion)
- Topics
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › TiO2 Photocatalysis and Solar Cells
- Life Sciences › Biochemistry, Genetics and Molecular Biology › Biophysics › Spectroscopy Techniques in Biomedical and Chemical Research
- Physical Sciences › Materials Science › Materials Chemistry › Solid-state spectroscopy and crystallography
- Keywords
- anatase, titanium dioxide, Raman spectra, vibrational frequencies
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review