The DOI matches its Crossref record.
Production and Characterization of Chitosan Fibers and 3‐D Fiber Mesh Scaffolds for Tissue Engineering Applications
Open accessAbstract
Summary: This study reports on the production of chitosan fibers and 3‐D fiber meshes for the use as tissue engineering scaffolds. Both structures were produced by means of a wet spinning technique. Maximum strain at break and tensile strength of the developed fibers were found to be 8.5% and 204.9 MPa, respectively. After 14 d of immersion in simulated body fluid (SBF), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and inductively coupled plasma emission (ICP) spectroscopy analyses showed that a bioactive Ca‐P layer was formed on the surface of the fibers, meaning that they exhibit a bioactive behavior. The samples showed around 120% max. swelling in physiological conditions. The pore sizes of 3‐D chitosan fiber mesh scaffolds were observed to be in the range of 100–500 μm by SEM. The equilibrium‐swelling ratio of the developed scaffolds was found to be around 170% (w/w) in NaCl solution at 37 °C. Besides that, the limit swelling strain was less than 30%, as obtained by mechanical spectroscopy measurements in the same conditions. The viscoelastic properties of the scaffolds were also evaluated by both creep and dynamic mechanical tests. By means of using short‐term MEM extraction test, both types of structures (fibers and scaffolds) were found to be non‐cytotoxic to fibroblasts. Furthermore, osteoblasts directly cultured over chitosan fiber mesh scaffolds presented good morphology and no inhibition of cell proliferation could be observed. Osteoblast‐like cells proliferating over chitosan based fibers after 7 d of culture. magnified imageOsteoblast‐like cells proliferating over chitosan based fibers after 7 d of culture.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Chitin and chitosan polymers: Chemistry, solubility and fiber formation
Pillai, C. K. S., Paul, W., & Sharma, C. P. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.04.001 · Cited by 2,745
Bone Tissue Engineering: State of the Art and Future Trends
Salgado, A. J., Coutinho, O. P., & Reis, R. L. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400026 · Cited by 1,681
Self-citationChitosan: A versatile biopolymer for orthopaedic tissue-engineering
Di Martino, A., Sittinger, M., & Risbud, M. V. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.03.016 · Cited by 1,634
25th Anniversary Article: Rational Design and Applications of Hydrogels in Regenerative Medicine
Annabi, N., Tamayol, A., Uquillas, J. A., Akbari, M., Bertassoni, L. E., Cha, C., Camci‐Unal, G., Dokmeci, M. R., Peppas, N. A., & Khademhosseini, A. (2014) · Advanced Materials · doi:10.1002/adma.201303233 · Cited by 1,409
Mano, J. F., Silva, G. A., Azevedo, H. S., Malafaya, P. B., Sousa, R. A., Silva, S. S., Boesel, L. F., Oliveira, J. M., Santos, T. C., Marques, A. P., et al. (2007) · Journal of The Royal Society Interface · doi:10.1098/rsif.2007.0220 · Cited by 1,140
Self-citationBiomimetic Systems for Hydroxyapatite Mineralization Inspired By Bone and Enamel
Palmer, L. C., Newcomb, C. J., Kaltz, S. R., Spoerke, E. D., & Stupp, S. I. (2008) · Chemical Reviews · doi:10.1021/cr8004422 · Cited by 1,090
Chitosan as an environment friendly biomaterial – a review on recent modifications and applications
Bakshi, P. S., Selvakumar, D., Kadirvelu, K., & Kumar, N. S. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.10.113 · Cited by 1,016
Polymeric materials for bone and cartilage repair
Puppi, D., Chiellini, F., Piras, A. M., & Chiellini, E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.01.006 · Cited by 913
A Review: Electrospinning of Biopolymer Nanofibers and their Applications
Schiffman, J. D., & Schauer, C. L. (2008) · Polymer Reviews · doi:10.1080/15583720802022182 · Cited by 820
Alves, N. M., & Mano, J. F. (2008) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2008.09.007 · Cited by 804
Self-citationCationic polymers and their therapeutic potential
Samal, S. K., Dash, M., Van Vlierberghe, S., Kaplan, D. L., Chiellini, E., van Blitterswijk, C., Moroni, L., & Dubruel, P. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35094g · Cited by 714
Graft copolymerized chitosan—present status and applications
Jayakumar, R., Prabaharan, M., Reis, R. L., & Mano, J. F. (2005) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2005.07.017 · Cited by 638
Self-citationGelain, F., Bottai, D., Vescovi, A., & Zhang, S. (2006) · PLoS ONE · doi:10.1371/journal.pone.0000119 · Cited by 613
Marine Polysaccharides in Pharmaceutical Applications: An Overview
Laurienzo, P. (2010) · Marine Drugs · doi:10.3390/md8092435 · Cited by 573
Bessa, P. C., Casal, M., & Reis, R. L. (2008) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.74 · Cited by 549
Self-citationFiber-based tissue engineering: progress, challenges, and opportunities
Tamayol, A., Akbari, M., Annabi, N., Paul, A., Khademhosseini, A., & Juncker, D. (2013) · Biotechnology Advances · doi:10.1016/j.biotechadv.2012.11.007 · Cited by 458
Jagur‐Grodzinski, J. (2006) · Polymers for Advanced Technologies · doi:10.1002/pat.729 · Cited by 394
Polymeric gels and hydrogels for biomedical and pharmaceutical applications
Jagur‐Grodzinski, J. (2010) · Polymers for Advanced Technologies · doi:10.1002/pat.1504 · Cited by 383
Gellan gum: A new biomaterial for cartilage tissue engineering applications
Oliveira, J. T., Martins, L., Picciochi, R., Malafaya, P. B., Sousa, R. A., Neves, N. M., Mano, J. F., & Reis, R. L. (2010) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32574 · Cited by 370
Self-citationRecent trends on gellan gum blends with natural and synthetic polymers: A review
Zia, K. M., Tabasum, S., Khan, M. F., Akram, N., Akhter, N., Noreen, A., & Zuber, M. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.11.099 · Cited by 370
Scaffolds based bone tissue engineering: the role of chitosan
Costa-Pinto, A. R., Reis, R. L., & Neves, N. M. (2011) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2010.0704 · Cited by 355
Self-citationYilgor, P., Tuzlakoglu, K., Reis, R. L., Hasirci, N., & Hasirci, V. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.03.024 · Cited by 323
Self-citationHydrogels for Musculoskeletal Tissue Engineering
Varghese, S., & Elisseeff, J. H. (2006) · Advances in Polymer Science · doi:10.1007/12_072 · Cited by 173
Polysaccharide matrices used in 3D in vitro cell culture systems
Diekjürgen, D., & Grainger, D. W. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.06.020 · Cited by 125
Stimuli-Responsive Cationic Hydrogels in Drug Delivery Applications
Deen, G., & Loh, X. (2018) · Gels · doi:10.3390/gels4010013 · Cited by 94
“Fiber mesh scaffolds and microspheres based on chitosan have also been studied for bone generation, cell adhesion, and viability [72].”
Background
Metadata
- Authors
- Tuzlakoglu, K., Alves, C. M., Mano, J. F., & Reis, R. L.
- Venue
- Macromolecular Bioscience
- Publisher
- Wiley
- Published
- 2004-08-09
- Volume
- 4
- Issue
- 8
- Pages
- 811-819
- ISSN
- 1616-5187 (ISSN-L)
- 1616-5195
- OpenAlex
- W2110649772
- Cited by
- 241
- References
- 0
- FWCI
- 7.32
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.