Linear and four‐armed poly(l‐lactide)‐block‐poly(d‐lactide) copolymers and their stereocomplexation with poly(lactide)s
The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Abstract
Linear and four‐armed poly(l‐lactide)‐block‐poly(d‐lactide) (PLLA‐b‐PDLA) block copolymers are synthesized by ring‐opening polymerization of d‐lactide on the end hydroxyl of linear and four‐armed PLLA prepolymers. DSC results indicate that the melting temperature and melting enthalpies of poly (lactide) stereocomplex in the copolymers are obviously lower than corresponding linear and four‐armed PLLA/PDLA blends. Compared with the four‐armed PLLA‐b‐PDLA copolymer, the similar linear PLLA‐b‐PDLA shows higher melting temperature (212.3 °C) and larger melting enthalpy (70.6 J g−1). After these copolymers blend with additional neat PLAs, DSC, and WAXD results show that the stereocomplex formation between free PLA molecular chain and enantiomeric PLA block is the major stereocomplex formation. In the linear copolymer/linear PLA blends, the stereocomplex crystallites (sc) as well as homochiral crystallites (hc) form in the copolymer/PLA cast films. However, in the four‐armed copolymer/linear PLA blends, both sc and hc develop in the four‐armed PLLA‐b‐PDLA/PDLA specimen, which means that the stereocomplexation mainly forms between free PDLA molecule and the inside PLLA block, and the outside PDLA block could form some microcrystallites. Although the melting enthalpies of stereocomplexes in the blends are smaller than that of neat copolymers, only two‐thirds of the molecular chains participate in the stereocomplex formation, and the crystallization efficiency strengthens. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014, 52, 1560–1567
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stereocomplex formation between enantiomeric poly(lactides)
Ikada, Y., Jamshidi, K., Tsuji, H., & Hyon, S. H. (1987) · Macromolecules · doi:10.1021/ma00170a034 · Cited by 1,409
Research progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767
From Lactic Acid to Poly(lactic acid) (PLA): Characterization and Analysis of PLA and Its Precursors
Inkinen, S., Hakkarainen, M., Albertsson, A.-C., & Södergård, A. (2011) · Biomacromolecules · doi:10.1021/bm101302t · Cited by 710
Polylactones: 31. Sn(II)octoate-initiated polymerization of L-lactide: a mechanistic study
Kricheldorf, H. R., Kreiser-Saunders, I., & Boettcher, C. (1995) · Polymer · doi:10.1016/0032-3861(95)93928-f · Cited by 411
Tsuji, H., Hyon, S. H., & Ikada, Y. (1991) · Macromolecules · doi:10.1021/ma00020a026 · Cited by 334
Multifunctional initiation of lactide polymerization by stannous octoate/pentaerythritol
Kim, S. H., Han, Y., Kim, Y. H., & Hong, S. I. (1992) · Die Makromolekulare Chemie · doi:10.1002/macp.1992.021930706 · Cited by 196
Synthesis of Poly(lactide)s with Modified Thermal and Mechanical Properties
Becker, J. M., Pounder, R. J., & Dove, A. P. (2010) · Macromolecular Rapid Communications · doi:10.1002/marc.201000088 · Cited by 146
Synthesis of Novel Comb-Type Polylactide and Its Biodegradability
Tasaka, F., Ohya, Y., & Ouchi, T. (2001) · Macromolecules · doi:10.1021/ma010067m · Cited by 74
Cited by
Poly(lactic acid) stereocomplexes: A decade of progress
Tsuji, H. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.017 · Cited by 535
Recent advances in stereocomplexation of enantiomeric PLA-based copolymers and applications
Li, Z., Tan, B. H., Lin, T., & He, C. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.05.003 · Cited by 285
Star-shaped and branched polylactides: Synthesis, characterization, and properties
Michalski, A., Brzezinski, M., Lapienis, G., & Biela, T. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.10.004 · Cited by 158
Remarkable melting behavior of PLA stereocomplex in linear PLLA/PDLA blends
Shao, J., Xiang, S., Bian, X., Sun, J., Li, G., & Chen, X. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/ie504484b · Cited by 113
Self-citationA mini review on the functional biomaterials based on poly (lactic acid) stereocomplex
Jing, Y., Quan, C., Liu, B., Jiang, Q., & Zhang, C. (2016) · Polymer Reviews · doi:10.1080/15583724.2015.1111380 · Cited by 92
Metadata
- Authors
- Shao, J., Tang, Z., Sun, J., Li, G., & Chen, X.
- Venue
- Journal of Polymer Science Part B: Polymer Physics
- Publisher
- Wiley
- Published
- 2014-09-30
- Volume
- 52
- Issue
- 23
- Pages
- 1560-1567
- ISSN
- 0887-6266 (ISSN-L)
- 1099-0488
- OpenAlex
- W2086227296
- Cited by
- 51
- References
- 8
- FWCI
- 3.85
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.