The DOI matches its Crossref record; 71 of the 71 references it cites were found in a registry or an index.
Plasma Methods for the Generation of Chemically Reactive Surfaces for Biomolecule Immobilization and Cell Colonization ‐ A Review
Abstract
Summary: This review surveys methods for the fabrication, by plasma surface treatments or plasma polymerization, of polymeric surfaces and thin plasma polymer coatings that contain reactive chemical groups useful for the subsequent covalent immobilization, by solution chemical reactions or vapor phase grafting, of molecules or polymers that can exert bio‐specific interfacial responses. Surfaces containing amine, carboxy, hydroxy, and aldehyde groups are the subject of this review. Aminated surfaces have been fabricated using various plasma vapors or mixtures and have found wide use for bio‐interface applications. However, in many cases the amine surfaces have a rather limited shelf life, with post‐plasma oxidation reactions and surface adaptation leading to the disappearance of amine groups from the surface. Aging is a widespread phenomenon that often has not been recognized, particularly in some of the earlier studies on the use of plasma‐fabricated surfaces for bio‐interfacial applications, and can markedly alter the surface chemistry. Plasma‐fabricated surfaces that contain carboxy groups have also been well documented. Fewer reports exist on hydroxy and aldehyde surfaces prepared by plasma methods. Hydroxy surfaces can be prepared by water plasma treatment or the plasma polymerization of alkyl alcohol vapors. Water plasma treatment on many polymer substrates suffers from aging, with surface adaptation leading to the movement of surface modification effects into the polymer. Both hydroxy and aldehyde surfaces have been used for the covalent immobilization of biologically active molecules. Aging effects are less well documented than for amine surfaces. This review also surveys studies using such surfaces for cell colonization assays. Generally, these surface chemistries show good ability to support cell colonization, though the effectiveness seems to depend on the process vapor and the plasma conditions. Carboxylate co‐polymer surfaces have shown excellent ability to support the colonization of some human cell lines of clinical interest. Immobilization of proteins onto plasma‐carboxylated surfaces is also well established. XPS O/C ratios (0 0 emission) as a function of storage time, of plasma‐polymerized methyl methacrylate deposited at power levels of 5 and 40 W. magnified imageXPS O/C ratios (0 0 emission) as a function of storage time, of plasma‐polymerized methyl methacrylate deposited at power levels of 5 and 40 W.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Plasma-surface modification of biomaterials
Chu, P. (2002) · Materials Science and Engineering: R: Reports · doi:10.1016/s0927-796x(02)00004-9 · Cited by 1,578
Plasma deposition, treatment, and etching of polymers
d’Agostino, R. (1990) · Cited by 1,108
Plasma surface modification of polymers for improved adhesion: a critical review
Liston, E. M., Martinu, L., & Wertheimer, M. R. (1993) · Journal of Adhesion Science and Technology · doi:10.1163/156856193x00600 · Cited by 1,091
Surface Analysis – The Principal Techniques
(2009) · Wiley eBooks · doi:10.1002/9780470721582 · Cited by 1,000
Surface modification of polymers for medical applications
Ikada, Y. (1994) · Biomaterials · doi:10.1016/0142-9612(94)90025-6 · Cited by 674
Protein adsorption to poly(ethylene oxide) surfaces
Gombotz, W. R., Guanghui, W., Horbett, T. A., & Hoffman, A. S. (1991) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820251211 · Cited by 634
Kingshott, P., Thissen, H., & Griesser, H. J. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00334-9 · Cited by 537
Self-citationGraft copolymerization of acrylamide onto a polyethylene surface pretreated with glow discharge
Suzuki, M., Kishida, A., Iwata, H., & Ikada, Y. (1986) · Macromolecules · doi:10.1021/ma00161a005 · Cited by 502
Adhesion of cells to polystyrene surfaces.
Curtis, A. S., Forrester, J. V., McInnes, C., & Lawrie, F. (1983) · The Journal of cell biology · doi:10.1083/jcb.97.5.1500 · Cited by 437
New ideas in biomaterials science—a path to engineered biomaterials
Ratner, B. D. (1993) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820270702 · Cited by 421
Cited by
Industrial use of immobilized enzymes
DiCosimo, R., McAuliffe, J., Poulose, A. J., & Bohlmann, G. (2013) · Chemical Society Reviews · doi:10.1039/c3cs35506c · Cited by 1,266
Hydrophilic and superhydrophilic surfaces and materials
Drelich, J., Chibowski, E., Meng, D. D., & Terpilowski, K. (2011) · Soft Matter · doi:10.1039/c1sm05849e · Cited by 911
von Woedtke, T., Reuter, S., Masur, K., & Weltmann, K.-D. (2013) · Physics Reports · doi:10.1016/j.physrep.2013.05.005 · Cited by 848
Desmet, T., Morent, R., De Geyter, N., Leys, C., Schacht, E., & Dubruel, P. (2009) · Biomacromolecules · doi:10.1021/bm900186s · Cited by 689
Nanoporous anodic aluminium oxide: Advances in surface engineering and emerging applications
Md Jani, A. M., Losic, D., & Voelcker, N. H. (2013) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.01.002 · Cited by 553
Titanium nanostructures for biomedical applications
Kulkarni, M., Mazare, A., Gongadze, E., Perutkova, Š., Kralj-Iglič, V, Milošev, I., Schmuki, P., Iglič, A., & Mozetič, M. (2015) · Nanotechnology · doi:10.1088/0957-4484/26/6/062002 · Cited by 506
Plasma Surface Modification of Biodegradable Polymers: A Review
Morent, R., De Geyter, N., Desmet, T., Dubruel, P., & Leys, C. (2011) · Plasma Processes and Polymers · doi:10.1002/ppap.201000153 · Cited by 434
Orientation and characterization of immobilized antibodies for improved immunoassays (Review)
Welch, N. G., Scoble, J. A., Muir, B. W., & Pigram, P. J. (2017) · Biointerphases · doi:10.1116/1.4978435 · Cited by 414
Chemical Vapor Deposition of Conformal, Functional, and Responsive Polymer Films
Alf, M. E., Asatekin, A., Barr, M. C., Baxamusa, S. H., Chelawat, H., Ozaydin‐Ince, G., Petruczok, C. D., Sreenivasan, R., Tenhaeff, W. E., Trujillo, N. J., et al. (2010) · Advanced Materials · doi:10.1002/adma.200902765 · Cited by 399
Hydrophilic and hydrophobic materials and their applications
Ahmad, D., van den Boogaert, I., Miller, J., Presswell, R., & Jouhara, H. (2018) · Energy Sources, Part A: Recovery, Utilization, and Environmental Effects · doi:10.1080/15567036.2018.1511642 · Cited by 354
Biomedical production of implants by additive electro-chemical and physical processes
Bartolo, P., Kruth, J.-P., Silva, J., Levy, G., Malshe, A., Rajurkar, K., Mitsuishi, M., Ciurana, J., & Leu, M. (2012) · CIRP Annals · doi:10.1016/j.cirp.2012.05.005 · Cited by 321
Surface modification of biomaterials and biomedical devices using additive manufacturing
Bose, S., Robertson, S. F., & Bandyopadhyay, A. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.11.003 · Cited by 305
The future for plasma science and technology
Weltmann, K., Kolb, J. F., Holub, M., Uhrlandt, D., Šimek, M., Ostrikov, K. (., Hamaguchi, S., Cvelbar, U., Černák, M., Locke, B., et al. (2019) · Plasma Processes and Polymers · doi:10.1002/ppap.201800118 · Cited by 295
Durán, I. R., & Laroche, G. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.09.001 · Cited by 273
Cold Plasma: an Alternative Technology for the Starch Modification
Thirumdas, R., Kadam, D., & Annapure, U. S. (2017) · Food Biophysics · doi:10.1007/s11483-017-9468-5 · Cited by 262
Plasma Surface Modification of Biomedical Polymers: Influence on Cell-Material Interaction
Jacobs, T., Morent, R., De Geyter, N., Dubruel, P., & Leys, C. (2012) · Plasma Chemistry and Plasma Processing · doi:10.1007/s11090-012-9394-8 · Cited by 255
Surface functionalization of biomaterials by radical polymerization
Zhou, T., Zhu, Y., Li, X., Liu, X., Yeung, K. W. K., Wu, S., Wang, X., Cui, Z., Yang, X., & Chu, P. K. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2016.04.005 · Cited by 145
Witman, M., Gidon, D., Graves, D. B., Smit, B., & Mesbah, A. (2019) · Plasma Sources Science and Technology · doi:10.1088/1361-6595/ab3c15 · Cited by 46
Synthetic biodegradable medical polyesters
Cama, G., Mogosanu, D. E., Houben, A., & Dubruel, P. (2017) · Science and Principles of Biodegradable and Bioresorbable Medical Polymers · doi:10.1016/b978-0-08-100372-5.00003-9 · Cited by 33
Metadata
- Authors
- Siow, K. S., Britcher, L., Kumar, S., & Griesser, H. J.
- Venue
- Plasma Processes and Polymers
- Publisher
- Wiley
- Published
- 2006-08-15
- Volume
- 3
- Issue
- 6-7
- Pages
- 392-418
- ISSN
- 1612-8850 (ISSN-L)
- 1612-8869
- OpenAlex
- W2099514329
- Cited by
- 972
- References
- 71
- FWCI
- 20.09
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.