The DOI matches its Crossref record; 92 of the 92 references it cites were found in a registry or an index.
Mechanisms, Capabilities, and Applications of High‐Resolution Electrohydrodynamic Jet Printing
Abstract
This review gives an overview of techniques used for high‐resolution jet printing that rely on electrohydrodynamically induced flows. Such methods enable the direct, additive patterning of materials with a resolution that can extend below 100 nm to provide unique opportunities not only in scientific studies but also in a range of applications that includes printed electronics, tissue engineering, and photonic and plasmonic devices. Following a brief historical perspective, this review presents descriptions of the underlying processes involved in the formation of liquid cones and jets to establish critical factors in the printing process. Different printing systems that share similar principles are then described, along with key advances that have been made in the last decade. Capabilities in terms of printable materials and levels of resolution are reviewed, with a strong emphasis on areas of potential application.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrospinning of Nanofibers: Reinventing the Wheel?
Li, D., & Xia, Y. (2004) · Advanced Materials · doi:10.1002/adma.200400719 · Cited by 5,521
Hydrogels for Tissue Engineering
Lee, K. Y., & Mooney, D. J. (2001) · Chemical Reviews · doi:10.1021/cr000108x · Cited by 5,277
Biomaterials & scaffolds for tissue engineering
O'Brien, F. J. (2011) · Materials Today · doi:10.1016/s1369-7021(11)70058-x · Cited by 3,437
High-Resolution Inkjet Printing of All-Polymer Transistor Circuits
Sirringhaus, H., Kawase, T., Friend, R. H., Shimoda, T., Inbasekaran, M., Wu, W., & Woo, E. P. (2000) · Science · doi:10.1126/science.290.5499.2123 · Cited by 3,311
Disintegration of water drops in an electric field
Taylor, G. I. (1964) · Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences · doi:10.1098/rspa.1964.0151 · Cited by 3,305
Inkjet Printing—Process and Its Applications
Singh, M., Haverinen, H. M., Dhagat, P., & Jabbour, G. E. (2010) · Advanced Materials · doi:10.1002/adma.200901141 · Cited by 2,375
Unconventional Methods for Fabricating and Patterning Nanostructures
Xia, Y., Rogers, J. A., Paul, K. E., & Whitesides, G. M. (1999) · Chemical Reviews · doi:10.1021/cr980002q · Cited by 1,538
Self-citationHigh-resolution electrohydrodynamic jet printing
Park, J.-U., Hardy, M., Kang, S. J., Barton, K., Adair, K., Mukhopadhyay, D. K., Lee, C. Y., Strano, M. S., Alleyne, A. G., Georgiadis, J. G., et al. (2007) · Nature Materials · doi:10.1038/nmat1974 · Cited by 1,492
Self-citationKlauk, H. (2010) · Chemical Society Reviews · doi:10.1039/b909902f · Cited by 1,337
Challenges and opportunities for structural DNA nanotechnology
Pinheiro, A. V., Han, D., Shih, W. M., & Yan, H. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.187 · Cited by 1,292
Tobjörk, D., & Österbacka, R. (2011) · Advanced Materials · doi:10.1002/adma.201004692 · Cited by 1,287
DNA Biosensors and Microarrays
Sassolas, A., Leca-Bouvier, B. D., & Blum, L. J. (2008) · Chemical Reviews · doi:10.1021/cr0684467 · Cited by 1,246
Omnidirectional Printing of Flexible, Stretchable, and Spanning Silver Microelectrodes
Ahn, B. Y., Duoss, E. B., Motala, M. J., Guo, X., Park, S.-I., Xiong, Y., Yoon, J., Nuzzo, R. G., Rogers, J. A., & Lewis, J. A. (2009) · Science · doi:10.1126/science.1168375 · Cited by 1,191
Self-citationElectrospraying route to nanotechnology: An overview
Jaworek, A., & Sobczyk, A. T. (2008) · Journal of Electrostatics · doi:10.1016/j.elstat.2007.10.001 · Cited by 963
Patterning surfaces with functional polymers
Nie, Z., & Kumacheva, E. (2008) · Nature Materials · doi:10.1038/nmat2109 · Cited by 935
3D Printing of Free Standing Liquid Metal Microstructures
Ladd, C., So, J., Muth, J., & Dickey, M. D. (2013) · Advanced Materials · doi:10.1002/adma.201301400 · Cited by 926
Conductive Nanomaterials for Printed Electronics
Kamyshny, A., & Magdassi, S. (2014) · Small · doi:10.1002/smll.201303000 · Cited by 911
Inkjet printing as a deposition and patterning tool for polymers and inorganic particles
Tekin, E., Smith, P. J., & Schubert, U. S. (2008) · Soft Matter · doi:10.1039/b711984d · Cited by 807
Stretchable, Large‐area Organic Electronics
Sekitani, T., & Someya, T. (2010) · Advanced Materials · doi:10.1002/adma.200904054 · Cited by 773
Perelaer, J., Smith, P. J., Mager, D., Soltman, D., Volkman, S. K., Subramanian, V., Korvink, J. G., & Schubert, U. S. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00264j · Cited by 736
Bates, C. M., Maher, M. J., Janes, D. W., Ellison, C. J., & Willson, C. G. (2014) · Macromolecules · doi:10.1021/ma401762n · Cited by 634
Downscaling of self-aligned, all-printed polymer thin-film transistors
Noh, Y.-Y., Zhao, N., Caironi, M., & Sirringhaus, H. (2007) · Nature Nanotechnology · doi:10.1038/nnano.2007.365 · Cited by 549
Toward Printed Integrated Circuits based on Unipolar or Ambipolar Polymer Semiconductors
Baeg, K., Caironi, M., & Noh, Y. (2013) · Advanced Materials · doi:10.1002/adma.201205361 · Cited by 522
Controllable Printing Droplets for High‐Resolution Patterns
Kuang, M., Wang, L., & Song, Y. (2014) · Advanced Materials · doi:10.1002/adma.201305416 · Cited by 479
Small‐scale free surface flows with breakup: Drop formation and emerging applications
Basaran, O. A. (2002) · AIChE Journal · doi:10.1002/aic.690480902 · Cited by 478
Reactive Silver Inks for Patterning High-Conductivity Features at Mild Temperatures
Walker, S. B., & Lewis, J. A. (2012) · Journal of the American Chemical Society · doi:10.1021/ja209267c · Cited by 459
Electrohydrodynamic tip streaming and emission of charged drops from liquid cones
Collins, R. T., Jones, J. J., Harris, M. T., & Basaran, O. A. (2008) · Nature Physics · doi:10.1038/nphys807 · Cited by 452
Negative refractive index metamaterials
Padilla, W. J., Basov, D. N., & Smith, D. R. (2006) · Materials Today · doi:10.1016/s1369-7021(06)71573-5 · Cited by 448
Kim, B. H., Onses, M. S., Lim, J. B., Nam, S., Oh, N., Kim, H., Yu, K. J., Lee, J. W., Kim, J.-H., Kang, S.-K., et al. (2015) · Nano Letters · doi:10.1021/nl503779e · Cited by 444
Self-citationNonwetting of impinging droplets on textured surfaces
Deng, T., Varanasi, K. K., Hsu, M., Bhate, N., Keimel, C., Stein, J., & Blohm, M. (2009) · Applied Physics Letters · doi:10.1063/1.3110054 · Cited by 440
Organic transistors manufactured using inkjet technology with subfemtoliter accuracy
Sekitani, T., Noguchi, Y., Zschieschang, U., Klauk, H., & Someya, T. (2008) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0708340105 · Cited by 424
Patterning of controllable surface wettability for printing techniques
Tian, D., Song, Y., & Jiang, L. (2013) · Chemical Society Reviews · doi:10.1039/c3cs35501b · Cited by 372
Jayasinghe, S. N., Qureshi, A., & Eagles, P. A. M. (2005) · Small · doi:10.1002/smll.200500291 · Cited by 286
Large-scale organic nanowire lithography and electronics
Min, S.-Y., Kim, T.-S., Kim, B. J., Cho, H., Noh, Y.-Y., Yang, H., Cho, J. H., & Lee, T.-W. (2013) · Nature Communications · doi:10.1038/ncomms2785 · Cited by 282
Dispensing nano–pico droplets and liquid patterning by pyroelectrodynamic shooting
Ferraro, P., Coppola, S., Grilli, S., Paturzo, M., & Vespini, V. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2010.82 · Cited by 271
Kuang, M., Wang, J., Bao, B., Li, F., Wang, L., Jiang, L., & Song, Y. (2013) · Advanced Optical Materials · doi:10.1002/adom.201300369 · Cited by 261
Electrohydrodynamic direct-writing
Huang, Y., Bu, N., Duan, Y., Pan, Y., Liu, H., Yin, Z., & Xiong, Y. (2013) · Nanoscale · doi:10.1039/c3nr04329k · Cited by 258
A review of non-contact micro- and nano-printing technologies
Ru, C., Luo, J., Xie, S., & Sun, Y. (2014) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/24/5/053001 · Cited by 248
3D Microperiodic Hydrogel Scaffolds for Robust Neuronal Cultures
Hanson Shepherd, J. N., Parker, S. T., Shepherd, R. F., Gillette, M. U., Lewis, J. A., & Nuzzo, R. G. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201001746 · Cited by 228
Micro- and nanofluidic systems for high-throughput biological screening
Hong, J., Edel, J. B., & deMello, A. J. (2009) · Drug Discovery Today · doi:10.1016/j.drudis.2008.10.001 · Cited by 205
Universal scaling laws for the disintegration of electrified drops
Collins, R. T., Sambath, K., Harris, M. T., & Basaran, O. A. (2013) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1213708110 · Cited by 187
Onses, M. S., Song, C., Williamson, L., Sutanto, E., Ferreira, P. M., Alleyne, A. G., Nealey, P. F., Ahn, H., & Rogers, J. A. (2013) · Nature Nanotechnology · doi:10.1038/nnano.2013.160 · Cited by 180
Self-citationPulsation phenomena during electrospray ionization
Juraschek, R., & Röllgen, F. W. (1998) · International Journal of Mass Spectrometry · doi:10.1016/s1387-3806(98)14025-3 · Cited by 174
High‐Throughput Printing via Microvascular Multinozzle Arrays
Hansen, C. J., Saksena, R., Kolesky, D. B., Vericella, J. J., Kranz, S. J., Muldowney, G. P., Christensen, K. T., & Lewis, J. A. (2013) · Advanced Materials · doi:10.1002/adma.201203321 · Cited by 170
van der Bos, A., van der Meulen, M.-J., Driessen, T. S. H., van den Berg, M., Reinten, H., Wijshoff, H. M. A., Versluis, M., & Lohse, D. (2014) · Physical Review Applied · doi:10.1103/physrevapplied.1.014004 · Cited by 162
Jeong, S., Lee, S. H., Jo, Y., Lee, S. S., Seo, Y.-H., Ahn, B. W., Kim, G., Jang, G.-E., Park, J., Ryu, B.-H., et al. (2013) · Journal of Materials Chemistry C · doi:10.1039/c3tc00904a · Cited by 154
Shao, Y., & Fu, J. (2013) · Advanced Materials · doi:10.1002/adma.201304431 · Cited by 153
Recent developments and directions in printed nanomaterials
Choi, H. W., Zhou, T., Singh, M., & Jabbour, G. E. (2014) · Nanoscale · doi:10.1039/c4nr03915g · Cited by 142
An Ag-grid/graphene hybrid structure for large-scale, transparent, flexible heaters
Kang, J., Jang, Y., Kim, Y., Cho, S.-H., Suhr, J., Hong, B. H., Choi, J., & Byun, D. (2015) · Nanoscale · doi:10.1039/c4nr06984f · Cited by 139
Additive nanomanufacturing – A review
Engstrøm, D. S., Porter, B. F., Pacios, M., & Bhaskaran, H. (2014) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2014.159 · Cited by 131
Flexing the Electrified Meniscus: The Birth of a Jet in Electrosprays
Marginean, I., Parvin, L., Heffernan, L., & Vértes, Á. (2004) · Analytical Chemistry · doi:10.1021/ac049817r · Cited by 130
Fabrication of TiO2 thin film memristor device using electrohydrodynamic inkjet printing
Duraisamy, N., Nauman, M. M., Kim, H.-C., Jo, J., & Choi, K. H. (2012) · Thin Solid Films · doi:10.1016/j.tsf.2012.03.003 · Cited by 117
Bae, H., Chu, H., Edalat, F., Cha, J. M., Sant, S., Kashyap, A., Ahari, A. F., Kwon, C. H., Nichol, J. W., Manoucheri, S., et al. (2012) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1494 · Cited by 110
Versatile, kinetically controlled, high precision electrohydrodynamic writing of micro/nanofibers
Huang, Y., Duan, Y., Ding, Y., Bu, N., Pan, Y., Lu, N., & Yin, Z. (2014) · Scientific Reports · doi:10.1038/srep05949 · Cited by 107
High Yield, Single Droplet Electrode Arrays for Nanoscale Printed Electronics
Caironi, M., Gili, E., Sakanoue, T., Cheng, X., & Sirringhaus, H. (2010) · ACS Nano · doi:10.1021/nn9014664 · Cited by 104
An, B. W., Kim, K., Kim, M., Kim, S.-Y., Hur, S. H., & Park, J. (2015) · Small · doi:10.1002/smll.201403131 · Cited by 103
Wang, L., Wang, J., Huang, Y., Liu, M., Kuang, M., Li, Y., Jiang, L., & Song, Y. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm33411a · Cited by 99
Patterned Hydrogel Substrates for Cell Culture with Electrohydrodynamic Jet Printing
Poellmann, M. J., Barton, K. L., Mishra, S., & Johnson, A. J. W. (2011) · Macromolecular Bioscience · doi:10.1002/mabi.201100004 · Cited by 94
No Battery Required: Perpetual RFID-Enabled Wireless Sensors for Cognitive Intelligence Applications
Kim, S., Mariotti, C., Alimenti, F., et al. (2013) · IEEE Microwave Magazine · doi:10.1109/mmm.2013.2259398 · Cited by 87
Ahn, S. H., Lee, H. J., & Kim, G. (2011) · Biomacromolecules · doi:10.1021/bm201126j · Cited by 84
An Electrohydrodynamic Bioprinter for Alginate Hydrogels Containing Living Cells
Gasperini, L., Maniglio, D., Motta, A., & Migliaresi, C. (2014) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2014.0149 · Cited by 82
Near-Field Light Design with Colloidal Quantum Dots for Photonics and Plasmonics
Kress, S. J. P., Richner, P., Jayanti, S. V., Galliker, P., Kim, D. K., Dimos Poulikakos, A., & Norris, D. J. (2014) · Nano Letters · doi:10.1021/nl5026997 · Cited by 81
Electrohydrodynamic Direct Writing of Biomedical Polymers and Composites
Ahmad, Z., Rasekh, M., & Edirisinghe, M. J. (2010) · Macromolecular Materials and Engineering · doi:10.1002/mame.200900396 · Cited by 80
Novel Electrohydrodynamic Printing of Nanocomposite Biopolymer Scaffolds
Gupta, A., Seifalian, A. M., Ahmad, Z., Edirisinghe, M. J., & Winslet, M. C. (2007) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911507078268 · Cited by 73
The minimum flow rate scaling of Taylor cone-jets issued from a nozzle
Scheideler, W. J., & Chen, C.-H. (2014) · Applied Physics Letters · doi:10.1063/1.4862263 · Cited by 73
Electrohydrodynamic jetting of mouse neuronal cells
Eagles, P. A. M., Qureshi, A., & Jayasinghe, S. N. (2006) · Biochemical Journal · doi:10.1042/bj20051838 · Cited by 72
Tran, B. Q., Byun, D., & Lee, S. (2007) · Journal of Aerosol Science · doi:10.1016/j.jaerosci.2007.07.003 · Cited by 72
Yudistira, H. T., Tenggara, A. P., Nguyen, V. D., Kim, T. T., Prasetyo, F. D., Choi, C., Choi, M., & Byun, D. (2013) · Applied Physics Letters · doi:10.1063/1.4832197 · Cited by 67
George, S., Chaudhery, V., Lu, M., Takagi, M., Amro, N. A., Pokhriyal, A., Tan, Y., Ferreira, P. M., & Cunningham, B. T. (2013) · Lab on a Chip · doi:10.1039/c3lc50579k · Cited by 66
Self-citationControlled deposition of nanoparticle clusters by electrohydrodynamic atomization
Jayasinghe, S. N., Edirisinghe, M. J., & Wang, D. Z. (2004) · Nanotechnology · doi:10.1088/0957-4484/15/11/025 · Cited by 63
Collagen grafted 3D polycaprolactone scaffolds for enhanced cartilage regeneration
Cai, Y., Li, J., Poh, C. K., Tan, H. C., Thian, E. S., Fuh, J. Y. H., Sun, J., Tay, B. Y., & Wang, W. (2013) · Journal of Materials Chemistry B · doi:10.1039/c3tb20680g · Cited by 63
Önses, M. S., Ramírez-Hernández, A., Hur, S., Sutanto, E., Williamson, L., Alleyne, A. G., Nealey, P. F., Pablo, J., & Rogers, J. A. (2014) · ACS Nano · doi:10.1021/nn5022605 · Cited by 61
Self-citationIndividually Position‐Addressable Metal‐Nanofiber Electrodes for Large‐Area Electronics
Lee, Y., Kim, T., Min, S., Xu, W., Jeong, S., Seo, H., & Lee, T. (2014) · Advanced Materials · doi:10.1002/adma.201403559 · Cited by 59
ZrO2 flexible printed resistive (memristive) switch through electrohydrodynamic printing process
Awais, M. N., Kim, H. C., Doh, Y. H., et al. (2013) · Thin Solid Films · doi:10.1016/j.tsf.2013.04.003 · Cited by 58
Continuous Equilibrated Growth of Ordered Block Copolymer Thin Films by Electrospray Deposition
Hu, H., Rangou, S., Kim, M., Gopalan, P., Filiz, V., Avgeropoulos, A., & Osuji, C. O. (2013) · ACS Nano · doi:10.1021/nn400279a · Cited by 57
Solution Processed Micro- and Nano-Bioarrays for Multiplexed Biosensing
Arrabito, G., & Pignataro, B. (2012) · Analytical Chemistry · doi:10.1021/ac300621z · Cited by 56
Direct Writing of Polycaprolactone Polymer for Potential Biomedical Engineering Applications
Rasekh, M., Ahmad, Z., Day, R. M., Wickam, A., & Edirisinghe, M. J. (2011) · Advanced Engineering Materials · doi:10.1002/adem.201080126 · Cited by 55
Huang, Y., Wang, X., Duan, Y., Bu, N., & Yin, Z. (2012) · Soft Matter · doi:10.1039/c2sm25535a · Cited by 53
Chen, C.-H. (2011) · Springer eBooks · doi:10.1007/978-3-7091-0900-7_6 · Cited by 48
Electrospray on superhydrophobic nozzles treated with argon and oxygen plasma
Byun, D., Lee, Y., Tran, S. B. Q., Nugyen, V. D., Kim, S., Park, B. H., Lee, S., Inamdar, N. K., & Bau, H. H. (2008) · Applied Physics Letters · doi:10.1063/1.2840725 · Cited by 44
Sekitani, T., & Someya, T. (2012) · Japanese Journal of Applied Physics · doi:10.1143/jjap.51.100001 · Cited by 42
Ankam, S., Teo, B. K. K., Kukumberg, M., & Yim, E. K. F. (2013) · Organogenesis · doi:10.4161/org.25425 · Cited by 38
He, J., Xu, F., Cao, Y. Q., Liu, Y., Li, D., & Jin, Z. (2014) · Applied Physics Letters · doi:10.1063/1.4905151 · Cited by 38
Micromechanical properties of hydrogels measured with MEMS resonant sensors
Corbin, E. A., Millet, L. J., Pikul, J. H., Johnson, C. L., Georgiadis, J. G., King, W. P., & Bashir, R. (2012) · Biomedical Microdevices · doi:10.1007/s10544-012-9730-z · Cited by 33
Patterned polydiacetylene-embedded polystyrene nanofibers based on electrohydrodynamic jet printing
Song, C., Rogers, J. A., Kim, J., & Ahn, H. (2014) · Macromolecular Research · doi:10.1007/s13233-015-3024-2 · Cited by 32
Self-citationCharacterizing and Patterning Polyacrylamide Substrates Functionalized with N-Hydroxysuccinimide
Poellmann, M. J., & Johnson, A. J. W. (2013) · Cellular and Molecular Bioengineering · doi:10.1007/s12195-013-0288-5 · Cited by 26
Localization of Multiple DNA Sequences on Nanopatterns
Önses, M. S., Pathak, P. K., Liu, C., et al. (2011) · ACS Nano · doi:10.1021/nn2021277 · Cited by 20
Targeted electrohydrodynamic printing for micro-reservoir drug delivery systems
Hwang, T. H., Kim, J. B., Yang, D. S., Park, Y. I., & Ryu, W. (2013) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/23/3/035012 · Cited by 18
Spatial and temporal evaluation of cell attachment to printed polycaprolactone microfibres
Rasekh, M., Ahmad, Z., Frangos, C. C., Bozec, L., Edirisinghe, M. J., & Day, R. M. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.09.032 · Cited by 14
Choi, K. H., & Awais, M. N. (2012) · Journal of the Korean Physical Society · doi:10.3938/jkps.61.119 · Cited by 13
Vespini, V., Coppola, S., Grilli, S., Paturzo, M., & Ferraro, P. (2013) · Measurement Science and Technology · doi:10.1088/0957-0233/24/4/045203 · Cited by 11
Awais, M. N., Jo, J., & Choi, K. H. (2013) · Applied Physics A · doi:10.1007/s00339-013-7851-8 · Cited by 4
Cited by
A comprehensive review on droplet-based bioprinting: Past, present and future
Gudapati, H., Dey, M., & Ozbolat, I. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.06.012 · Cited by 859
A Review of 3D Printing Technologies for Soft Polymer Materials
Zhou, L., Fu, J., & He, Y. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000187 · Cited by 713
Additive manufacturing of structural materials
Liu, G., Zhang, X., Chen, X., He, Y., Cheng, L., Huo, M., Yin, J., Hao, F., Chen, S., Wang, P., et al. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100596 · Cited by 707
3D bioprinting of tissues and organs for regenerative medicine
Vijayavenkataraman, S., Yan, W.-C., Lu, W. F., Wang, C.-H., & Fuh, J. Y. H. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.07.004 · Cited by 630
Farahani, R. D., Dubé, M., & Therriault, D. (2016) · Advanced Materials · doi:10.1002/adma.201506215 · Cited by 604
Metadata
- Authors
- Onses, M. S., Sutanto, E., Ferreira, P. M., Alleyne, A. G., & Rogers, J. A.
- Venue
- Small
- Publisher
- Wiley
- Published
- 2015-06-29
- Volume
- 11
- Issue
- 34
- Pages
- 4237-4266
- ISSN
- 1613-6810 (ISSN-L)
- 1613-6829
- OpenAlex
- W2144156830
- Cited by
- 603
- References
- 92
- FWCI
- 17.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.