The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Ice‐Templated Assembly Strategy to Construct 3D Boron Nitride Nanosheet Networks in Polymer Composites for Thermal Conductivity Improvement
Abstract
Owing to the growing heat removal issue of modern electronic devices, polymer composites with high thermal conductivity have drawn much attention in the past few years. However, a traditional method to enhance the thermal conductivity of the polymers by addition of inorganic fillers usually creates composite with not only limited thermal conductivity but also other detrimental effects due to large amount of fillers required. Here, novel polymer composites are reported by first constructing 3D boron nitride nanosheets (3D‐BNNS) network using ice‐templated approach and then infiltrating them with epoxy matrix. The obtained polymer composites exhibit a high thermal conductivity (2.85 W m−1 K−1), a low thermal expansion coefficient (24–32 ppm K−1), and an increased glass transition temperature (Tg) at relatively low BNNSs loading (9.29 vol%). These results demonstrate that this approach opens a new avenue for design and preparation of polymer composites with high thermal conductivity. The polymer composites are potentially useful in advanced electronic packaging techniques, namely, thermal interface materials, underfill materials, molding compounds, and organic substrates.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thermal conductivity of carbon nanotubes and their polymer nanocomposites: A review
Han, Z., & Fina, A. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.11.004 · Cited by 2,603
Emerging challenges and materials for thermal management of electronics
Moore, A. L., & Shi, L. (2014) · Materials Today · doi:10.1016/j.mattod.2014.04.003 · Cited by 2,106
Effective thermal conductivity of particulate composites with interfacial thermal resistance
Nan, C.-W., Birringer, R., Clarke, D. R., & Gleiter, H. (1997) · Journal of Applied Physics · doi:10.1063/1.365209 · Cited by 2,009
High-mobility three-atom-thick semiconducting films with wafer-scale homogeneity
Kang, K., Xie, S., Huang, L., Han, Y., Huang, P. Y., Mak, K. F., Kim, C.-J., Muller, D., & Park, J. (2015) · Nature · doi:10.1038/nature14417 · Cited by 1,961
Strong, tough and stiff bioinspired ceramics from brittle constituents
Bouville, F., Maire, E., Meille, S., Van de Moortèle, B., Stevenson, A. J., & Deville, S. (2014) · Nature Materials · doi:10.1038/nmat3915 · Cited by 959
Thermal properties of graphene and multilayer graphene: Applications in thermal interface materials
Shahil, K. M. F., & Balandin, A. A. (2012) · Solid State Communications · doi:10.1016/j.ssc.2012.04.034 · Cited by 829
Aligned two- and three-dimensional structures by directional freezing of polymers and nanoparticles
Zhang, H., Hussain, I., Brust, M., Butler, M. F., Rannard, S. P., & Cooper, A. I. (2005) · Nature Materials · doi:10.1038/nmat1487 · Cited by 813
Foygel, M., Morris, R. D., Anez, D., French, S., & Sobolev, V. L. (2005) · Physical Review B · doi:10.1103/physrevb.71.104201 · Cited by 655
Huang, X., Zhi, C., Jiang, P., Golberg, D., Bando, Y., & Tanaka, T. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201201824 · Cited by 647
Li, Q., Zhang, G., Liu, F., Han, K., Gadinski, M. R., Xiong, C., & Wang, Q. (2014) · Energy & Environmental Science · doi:10.1039/c4ee02962c · Cited by 645
Cited by
Thermal conductivity of polymers and polymer nanocomposites
Huang, C., Qian, X., & Yang, R. (2018) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2018.06.002 · Cited by 909
Shao, G., Hanaor, D. A. H., Shen, X., & Gurlo, A. (2020) · Advanced Materials · doi:10.1002/adma.201907176 · Cited by 871
Chen, J., Huang, X., Sun, B., & Jiang, P. (2019) · ACS Nano · doi:10.1021/acsnano.8b06290 · Cited by 768
Two-Dimensional Materials for Thermal Management Applications
Song, H., Liu, J., Liu, B., Wu, J., Cheng, H.-M., & Kang, F. (2018) · Joule · doi:10.1016/j.joule.2018.01.006 · Cited by 680
Han, J., Du, G., Gao, W., & Bai, H. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900412 · Cited by 620
Zhang, F., Feng, Y., & Feng, W. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100580 · Cited by 566
Zeng, X., Sun, J., Yao, Y., Sun, R., Xu, J.-B., & Wong, C.-P. (2017) · ACS Nano · doi:10.1021/acsnano.7b02359 · Cited by 523
Self-citationHu, J., Huang, Y., Yao, Y., Pan, G., Sun, J., Zeng, X., Sun, R., Xu, J.-B., Song, B., & Wong, C.-P. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b02410 · Cited by 499
Self-citationThermal transport in polymeric materials and across composite interfaces
Mehra, N., Mu, L., Ji, T., Yang, X., Kong, J., Gu, J., & Zhu, J. (2018) · Applied Materials Today · doi:10.1016/j.apmt.2018.04.004 · Cited by 453
Construction of 3D Skeleton for Polymer Composites Achieving a High Thermal Conductivity
Yao, Y., Sun, J., Zeng, X., Sun, R., Xu, J., & Wong, C. (2018) · Small · doi:10.1002/smll.201704044 · Cited by 389
Self-citationLian, G., Tuan, C.-C., Li, L., Jiao, S., Wang, Q., Moon, K.-S., Cui, D., & Wong, C.-P. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b01595 · Cited by 382
Self-citationChen, J., Huang, X., Sun, B., Wang, Y., Zhu, Y., & Jiang, P. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b08061 · Cited by 375
Yang, X., Liang, C., Ma, T., Guo, Y., Kong, J., Gu, J., Chen, M., & Zhu, J. (2018) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-018-0031-8 · Cited by 372
Wu, S., Li, T., Wu, M., Xu, J., Hu, Y., Chao, J., Yan, T., & Wang, R. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta05904h · Cited by 310
Self-citationLi, X.-H., Li, X., Liao, K.-N., Min, P., Liu, T., Dasari, A., & Yu, Z.-Z. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b12295 · Cited by 307
Jiang, Y., Chen, Y., Liu, Y.-J., & Sui, G.-X. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.12.131 · Cited by 302
Graphene related materials for thermal management
Fu, Y., Hansson, J., Liu, Y., Chen, S., Zehri, A., Samani, M. K., Wang, N., Ni, Y., Zhang, Y., Zhang, Z.-B., et al. (2020) · 2D Materials · doi:10.1088/2053-1583/ab48d9 · Cited by 301
Strategies for enhancing thermal conductivity of polymer-based thermal interface materials: a review
Ma, H., Gao, B., Wang, M., Yuan, Z., Shen, J., Zhao, J., & Feng, Y. (2021) · Journal of Materials Science · doi:10.1007/s10853-020-05279-x · Cited by 299
Zhang, X., Zhao, N., & He, C. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100672 · Cited by 293
Recent progress in polymer/two-dimensional nanosheets composites with novel performances
Li, J., Liu, X., Feng, Y., & Yin, J. (2022) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2022.101505 · Cited by 274
Xu, X., Hu, R., Chen, M., Dong, J., Xiao, B., Wang, Q., & Wang, H. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125447 · Cited by 272
Liu, D., Lei, C., Wu, K., & Fu, Q. (2020) · ACS Nano · doi:10.1021/acsnano.0c06680 · Cited by 271
Yang, J., Tang, L.-S., Bai, L., Bao, R.-Y., Liu, Z.-Y., Xie, B.-H., Yang, M.-B., & Yang, W. (2019) · Materials Horizons · doi:10.1039/c8mh01219a · Cited by 269
Shen, X., Zheng, Q., & Kim, J.-K. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100708 · Cited by 264
Hu, J., Huang, Y., Zeng, X., Li, Q., Ren, L., Sun, R., Xu, J.-B., & Wong, C.-P. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.01.045 · Cited by 256
Self-citationYang, J., Tang, L.-S., Bao, R.-Y., Bai, L., Liu, Z.-Y., Yang, W., Xie, B.-H., & Yang, M.-B. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta08454k · Cited by 255
Yang, J., Tang, L.-S., Bai, L., Bao, R.-Y., Liu, Z., Xie, B.-H., Yang, M.-B., & Yang, W. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b00565 · Cited by 105
Metadata
- Authors
- Zeng, X., Yao, Y., Gong, Z., Wang, F., Sun, R., Xu, J., & Wong, C.
- Venue
- Small
- Publisher
- Wiley
- Published
- 2015-10-19
- Volume
- 11
- Issue
- 46
- Pages
- 6205-6213
- ISSN
- 1613-6810 (ISSN-L)
- 1613-6829
- OpenAlex
- W2130177028
- Cited by
- 618
- References
- 37
- FWCI
- 13.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.