The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
Rational Integration of Polypropylene/Graphene Oxide/Nafion as Ternary‐Layered Separator to Retard the Shuttle of Polysulfides for Lithium–Sulfur Batteries
Abstract
The reversible electrochemical transformation from lithium (Li) and sulfur (S) into Li 2 S through multielectron reactions can be utilized in secondary Li–S batteries with very high energy density. However, both the low Coulombic efficiency and severe capacity degradation limits the full utilization of active sulfur, which hinders the practical applications of Li–S battery system. The present study reports a ternary‐layered separator with a macroporous polypropylene (PP) matrix layer, graphene oxide (GO) barrier layer, and Nafion retarding layer as the separator for Li–S batteries with high Coulombic efficiency and superior cyclic stability. In the ternary‐layered separator, ultrathin layer of GO (0.0032 mg cm−2, estimated to be around 40 layers) blocks the macropores of PP matrix, and a dense ion selective Nafion layer with a very low loading amount of 0.05 mg cm−2 is attached as a retarding layer to suppress the crossover of sulfur‐containing species. The ternary‐layered separators are effective in improving the initial capacity and the Coulombic efficiency of Li–S cells from 969 to 1057 mAh g−1, and from 80% to over 95% with an LiNO 3‐free electrolyte, respectively. The capacity degradation is reduced from 0.34% to 0.18% per cycle within 200 cycles when the PP separator is replaced by the ternary‐layered separators. This work provides the rational design strategy for multifunctional separators at cell scale to effective utilizing of active sulfur and retarding of polysulfides, which offers the possibility of high energy density Li–S cells with long cycling life.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
Lithium–Sulfur Batteries: Progress and Prospects
Manthiram, A., Chung, S., & Zu, C. (2015) · Advanced Materials · doi:10.1002/adma.201405115 · Cited by 1,620
Lithium–sulphur batteries with a microporous carbon paper as a bifunctional interlayer
Su, Y.-S., & Manthiram, A. (2012) · Nature Communications · doi:10.1038/ncomms2163 · Cited by 1,458
On the Surface Chemical Aspects of Very High Energy Density, Rechargeable Li–Sulfur Batteries
Aurbach, D., Pollak, E., Elazari, R., Salitra, G., Kelley, C. S., & Affinito, J. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3148721 · Cited by 1,443
Pang, Q., Kundu, D., Cuisinier, M., & Nazar, L. F. (2014) · Nature Communications · doi:10.1038/ncomms5759 · Cited by 1,318
Sulfur Cathodes Based on Conductive MXene Nanosheets for High‐Performance Lithium–Sulfur Batteries
Liang, X., Garsuch, A., & Nazar, L. F. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410174 · Cited by 1,201
A Graphene–Pure‐Sulfur Sandwich Structure for Ultrafast, Long‐Life Lithium–Sulfur Batteries
Zhou, G., Pei, S., Li, L., Wang, D., Wang, S., Huang, K., Yin, L., Li, F., & Cheng, H. (2014) · Advanced Materials · doi:10.1002/adma.201302877 · Cited by 997
Song, J., Xu, T., Gordin, M. L., Zhu, P., Lv, D., Jiang, Y., Chen, Y., Duan, Y., & Wang, D. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201302631 · Cited by 978
Carbon–sulfur composites for Li–S batteries: status and prospects
Wang, D.-W., Zeng, Q., Zhou, G., Yin, L., Li, F., Cheng, H.-M., Gentle, I. R., & Lu, G. Q. M. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta11045a · Cited by 816
Huang, J.-Q., Zhuang, T.-Z., Zhang, Q., Peng, H.-J., Chen, C.-M., & Wei, F. (2015) · ACS Nano · doi:10.1021/nn507178a · Cited by 809
Self-citation
Cited by
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Self-citationReview on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Self-citationNanostructured Metal Oxides and Sulfides for Lithium–Sulfur Batteries
Liu, X., Huang, J., Zhang, Q., & Mai, L. (2017) · Advanced Materials · doi:10.1002/adma.201601759 · Cited by 1,616
Self-citationZhou, T., Lv, W., Li, J., Zhou, G., Zhao, Y., Fan, S., Liu, B., Li, B., Kang, F., & Yang, Q.-H. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01430a · Cited by 1,056
A review of flexible lithium–sulfur and analogous alkali metal–chalcogen rechargeable batteries
Peng, H.-J., Huang, J.-Q., & Zhang, Q. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00139h · Cited by 680
Self-citationBeyond lithium ion batteries: Higher energy density battery systems based on lithium metal anodes
Shen, X., Liu, H., Cheng, X.-B., Yan, C., & Huang, J.-Q. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.12.002 · Cited by 653
Self-citationAdvanced Micro/Nanostructures for Lithium Metal Anodes
Zhang, R., Li, N., Cheng, X., Yin, Y., Zhang, Q., & Guo, Y. (2017) · Advanced Science · doi:10.1002/advs.201600445 · Cited by 549
Self-citationGraphene-based composites for electrochemical energy storage
Wang, B., Ruan, T., Chen, Y., Jin, F., Peng, L., Zhou, Y., Wang, D., & Dou, S. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.08.004 · Cited by 530
Nanostructured energy materials for electrochemical energy conversion and storage: A review
Zhang, X., Cheng, X., & Zhang, Q. (2016) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2016.11.003 · Cited by 516
Self-citationPorous membranes in secondary battery technologies
Lu, W., Yuan, Z., Zhao, Y., Zhang, H., Zhang, H., & Li, X. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00823b · Cited by 479
Recent Advances in Heterostructure Engineering for Lithium–Sulfur Batteries
Huang, S., Wang, Z., Von Lim, Y., Wang, Y., Li, Y., Zhang, D., & Yang, H. Y. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003689 · Cited by 438
Structural Design of Lithium–Sulfur Batteries: From Fundamental Research to Practical Application
Yang, X., Li, X., Adair, K., Zhang, H., & Sun, X. (2018) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0010-3 · Cited by 411
Advanced Separators for Lithium‐Ion and Lithium–Sulfur Batteries: A Review of Recent Progress
Xiang, Y., Li, J., Lei, J., Liu, D., Xie, Z., Qu, D., Li, K., Deng, T., & Tang, H. (2016) · ChemSusChem · doi:10.1002/cssc.201600943 · Cited by 404
Rational design of two-dimensional nanomaterials for lithium–sulfur batteries
Jana, M., Xu, R., Cheng, X.-B., Yeon, J. S., Park, J. M., Huang, J.-Q., Zhang, Q., & Park, H. S. (2020) · Energy & Environmental Science · doi:10.1039/c9ee02049g · Cited by 393
Self-citationInterface Engineering for Lithium Metal Anodes in Liquid Electrolyte
Zhai, P., Liu, L., Gu, X., Wang, T., & Gong, Y. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202001257 · Cited by 380
Li, S., Zhang, W., Zheng, J., Lv, M., Song, H., & Du, L. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000779 · Cited by 373
Phosphorene as a Polysulfide Immobilizer and Catalyst in High‐Performance Lithium–Sulfur Batteries
Li, L., Chen, L., Mukherjee, S., Gao, J., Sun, H., Liu, Z., Ma, X., Gupta, T., Singh, C. V., Ren, W., et al. (2017) · Advanced Materials · doi:10.1002/adma.201602734 · Cited by 364
Advanced nanostructured carbon-based materials for rechargeable lithium-sulfur batteries
Zhang, L., Wang, Y., Niu, Z., & Chen, J. (2019) · Carbon · doi:10.1016/j.carbon.2018.09.067 · Cited by 343
Recent progress of separators in lithium-sulfur batteries
Li, C., Liu, R., Xiao, Y., Cao, F., & Zhang, H. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2021.05.034 · Cited by 343
Understanding and suppression strategies toward stable Li metal anode for safe lithium batteries
Yasin, G., Arif, M., Mehtab, T., Lu, X., Yu, D., Muhammad, N., Nazir, M. T., & Song, H. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.09.020 · Cited by 317
Hao, H., Hutter, T., Boyce, B. L., Watt, J., Liu, P., & Mitlin, D. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00838 · Cited by 314
Mechanistic understanding of the role separators playing in advanced lithium‐sulfur batteries
Wei, Z., Ren, Y., Sokolowski, J., Zhu, X., & Wu, G. (2020) · InfoMat · doi:10.1002/inf2.12097 · Cited by 302
Engineering Oxygen Vacancies in a Polysulfide‐Blocking Layer with Enhanced Catalytic Ability
Li, Z., Zhou, C., Hua, J., Hong, X., Sun, C., Li, H., Xu, X., & Mai, L. (2020) · Advanced Materials · doi:10.1002/adma.201907444 · Cited by 292
Hou, L.-P., Zhang, X.-Q., Li, B.-Q., & Zhang, Q. (2021) · Materials Today · doi:10.1016/j.mattod.2020.10.021 · Cited by 283
Self-citation12 years roadmap of the sulfur cathode for lithium sulfur batteries (2009–2020)
Liu, T., Hu, H., Ding, X., Yuan, H., Jin, C., Nai, J., Liu, Y., Wang, Y., Wan, Y., & Tao, X. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.05.023 · Cited by 278
Review—Li Metal Anode in Working Lithium-Sulfur Batteries
Cheng, X.-B., Huang, J.-Q., & Zhang, Q. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0111801jes · Cited by 277
Self-citationA review on separators for lithium sulfur battery: Progress and prospects
Deng, N., Kang, W., Liu, Y., Ju, J., Wu, D., Li, L., Hassan, B. S., & Cheng, B. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.09.044 · Cited by 267
A Toolbox for Lithium–Sulfur Battery Research: Methods and Protocols
Zhang, G., Zhang, Z., Peng, H., Huang, J., & Zhang, Q. (2017) · Small Methods · doi:10.1002/smtd.201700134 · Cited by 260
Self-citationZhu, J., Chen, C., Lu, Y., Zang, J., Jiang, M., Kim, D., & Zhang, X. (2016) · Carbon · doi:10.1016/j.carbon.2016.02.007 · Cited by 256
Self-citationGraphene oxide: An emerging electromaterial for energy storage and conversion
Tian, Y., Yu, Z., Cao, L., Zhang, X. L., Sun, C., & Wang, D.-W. (2021) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2020.07.006 · Cited by 240
Metadata
- Authors
- Zhuang, T., Huang, J., Peng, H., He, L., Cheng, X., Chen, C., & Zhang, Q.
- Venue
- Small
- Publisher
- Wiley
- Published
- 2015-12-07
- Volume
- 12
- Issue
- 3
- Pages
- 381-389
- ISSN
- 1613-6810 (ISSN-L)
- 1613-6829
- OpenAlex
- W2192720991
- Cited by
- 346
- References
- 46
- FWCI
- 19.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.