The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
3D Printing of Flexible Electronic Devices
Open accessAbstract
Compared to traditional , simple, planar or tubular flexible devices fabricated by spin‐coating, casting, or extrusion, 3D‐printed flexible electronic devices possess complicated geometries with precisely prescribed microarchitectures and excellent mechanical properties for satisfying all kinds of individual requirements. However, the full utilization of 3D‐printing technology to realize 3D‐printed flexible electronic devices remains limited by the flexibility and conductivity of 3D‐printing materials. To achieve 3D‐printed flexible electronic devices, the flexibility of 3D‐printed flexible devices and functionalization of conductive materials or hard silicon‐based electronic devices are combined. These 3D‐printed flexible electronic devices can be applied widely in the fields of personal wearable devices, prosthetic organs for the disabled, and human–computer interfaces. To further promote the rapid advent of 3D‐printed flexible electronic devices, the recent strategies and future developmental directions of fabricating these complex electronic devices are discussed here.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kim, D.-H., Lu, N., Ma, R., Kim, Y.-S., Kim, R.-H., Wang, S., Wu, J., Won, S. M., Tao, H., Islam, A., et al. (2011) · Science · doi:10.1126/science.1206157 · Cited by 4,836
Soft Microfluidic Assemblies of Sensors, Circuits, and Radios for the Skin
Xu, S., Zhang, Y., Jia, L., Mathewson, K. E., Jang, K.-I., Kim, J., Fu, H., Huang, X., Chava, P., Wang, R., et al. (2014) · Science · doi:10.1126/science.1250169 · Cited by 1,199
A skin-inspired organic digital mechanoreceptor
Tee, B. C.-K., Chortos, A., Berndt, A., Nguyen, A. K., Tom, A., McGuire, A., Lin, Z. C., Tien, K., Bae, W.-G., Wang, H., et al. (2015) · Science · doi:10.1126/science.aaa9306 · Cited by 882
Instrumented cardiac microphysiological devices via multimaterial three-dimensional printing
Lind, J. U., Busbee, T. A., Valentine, A. D., Pasqualini, F. S., Yuan, H., Yadid, M., Park, S.-J., Kotikian, A., Nesmith, A. P., Campbell, P. H., et al. (2017) · Nature Materials · doi:10.1038/nmat4782 · Cited by 863
Flexible and Stretchable Electronics for Biointegrated Devices
Kim, D.-H., Ghaffari, R., Lu, N., & Rogers, J. A. (2012) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-071811-150018 · Cited by 749
3D Printed Photoresponsive Devices Based on Shape Memory Composites
Yang, H., Leow, W. R., Wang, T., Wang, J., Yu, J., He, K., Qi, D., Wan, C., & Chen, X. (2017) · Advanced Materials · doi:10.1002/adma.201701627 · Cited by 483
Self-citationA wearable multiplexed silicon nonvolatile memory array using nanocrystal charge confinement
Kim, J., Son, D., Lee, M., Song, C., Song, J.-K., Koo, J. H., Lee, D. J., Shim, H. J., Kim, J. H., Lee, M., et al. (2016) · Science Advances · doi:10.1126/sciadv.1501101 · Cited by 164
Cited by
Organic crystalline materials in flexible electronics
Wang, Y., Sun, L., Wang, C., Yang, F., Ren, X., Zhang, X., Dong, H., & Hu, W. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00406d · Cited by 434
Polymer 3D Printing Review: Materials, Process, and Design Strategies for Medical Applications
Arefin, A. M. E., Khatri, N. R., Kulkarni, N., & Egan, P. F. (2021) · Polymers · doi:10.3390/polym13091499 · Cited by 361
Soliman, A., AlAmoodi, N., Karanikolos, G. N., Doumanidis, C. C., & Polychronopoulou, K. (2020) · Nanomaterials · doi:10.3390/nano10112198 · Cited by 53
Metadata
- Authors
- Yang, H., Leow, W. R., & Chen, X.
- Venue
- Small Methods
- Publisher
- Wiley
- Published
- 2017-11-20
- Volume
- 2
- Issue
- 1
- ISSN
- 2366-9608 (ISSN-L)
- OpenAlex
- W2768749805
- Cited by
- 185
- References
- 7
- FWCI
- 5.15
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 3D Printing of Flexible Electronic Devices. https://app.cochat.ai/papers/10.1002/smtd.201700259
- The paper
- Yang, H., Leow, W. R., & Chen, X. (2018). 3D Printing of Flexible Electronic Devices. Small Methods. https://doi.org/10.1002/smtd.201700259
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
