CoChat

A buyer’s guide to the Hubble constant

Open access
Shah, Paul, Lemos, Pablo, Lahav, Ofer · 2021 · The Astronomy and Astrophysics Review

The DOI matches its Crossref record; 180 of the 180 references it cites were found in a registry or an index.

Abstract

Since the expansion of the universe was first established by Edwin Hubble and Georges Lemaître about a century ago, the Hubble constant $$H_0$$ H 0 which measures its rate has been of great interest to astronomers. Besides being interesting in its own right, few properties of the universe can be deduced without it. In the last decade, a significant gap has emerged between different methods of measuring it, some anchored in the nearby universe, others at cosmological distances. The SH0ES team has found $$H_0 = 73.2 \pm 1.3 \; \;\,\hbox {kms}^{-1} \,\hbox {Mpc}^{-1}$$ H 0 = 73.2 ± 1.3 kms - 1 Mpc - 1 locally, whereas the value found for the early universe by the Planck Collaboration is $$H_0 = 67.4 \pm 0.5 \; \;\,\hbox {kms}^{-1} \,\hbox {Mpc}^{-1}$$ H 0 = 67.4 ± 0.5 kms - 1 Mpc - 1 from measurements of the cosmic microwave background. Is this gap a sign that the well-established $${\varLambda} {\text{CDM}}$$ Λ CDM cosmological model is somehow incomplete? Or are there unknown systematics? And more practically, how should humble astronomers pick between competing claims if they need to assume a value for a certain purpose? In this article, we review results and what changes to the cosmological model could be needed to accommodate them all. For astronomers in a hurry, we provide a buyer’s guide to the results, and make recommendations.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1007/s00159-021-00137-4

Cites

180 of 180 references verified0 citation errors · 0 not checkable

Statistics

Figures

Velocity-Distance Relation among Extra-Galactic Nebulae.
Velocity-Distance Relation among Extra-Galactic Nebulae.CC-BY · From the PDF
Fig. 2 Summary of recent H 0 measurements. We have intentionally selected a limited number of results to show those that are as independent from each other as possible, in the sense that they use different photometric data, distance calibrators and so on. More comprehensive versions of this plot can be found for example in Di Valentino et al. (2021). Comments: (1) CCHP and Yuan et al. share a common distance to LMC as a calibrator. (2) TDCOSMO is a re-analysis of almost the same data as H0LiCOW, but with changes to the galactic potentials. (3) BOSS and DES share a prior constraint on baryon densities from BBN. (4) The results of Blakeslee et al. use new SBF observations, whereas Khetan et al. use archival SBF distances to calibrate SN Ia. The code use to generate this figure is publicly available at https://github.com/ Pablo-Lemos/plot1d
Fig. 2 Summary of recent H 0 measurements. We have intentionally selected a limited number of results to show those that are as independent from each other as possible, in the sense that they use different photometric data, distance calibrators and so on. More comprehensive versions of this plot can be found for example in Di Valentino et al. (2021). Comments: (1) CCHP and Yuan et al. share a common distance to LMC as a calibrator. (2) TDCOSMO is a re-analysis of almost the same data as H0LiCOW, but with changes to the galactic potentials. (3) BOSS and DES share a prior constraint on baryon densities from BBN. (4) The results of Blakeslee et al. use new SBF observations, whereas Khetan et al. use archival SBF distances to calibrate SN Ia. The code use to generate this figure is publicly available at https://github.com/ Pablo-Lemos/plot1dCC-BY · From the PDF
Fig. 3 Our schematic illustration of the construction of distance ladders. Green circles represent the calibration of the distance ladder (either the base or overlap of each rung), and the bars are the rungs of the distance ladder. The size of dots or thickness of bars are in proportion to their contribution to the error budget of H 0; in the case of the CMB and BBN we have opted for a thin line to show the dependence on K CDM
Fig. 3 Our schematic illustration of the construction of distance ladders. Green circles represent the calibration of the distance ladder (either the base or overlap of each rung), and the bars are the rungs of the distance ladder. The size of dots or thickness of bars are in proportion to their contribution to the error budget of H 0; in the case of the CMB and BBN we have opted for a thin line to show the dependence on K CDMCC-BY · From the PDF
Fig. 4 An illustration of BACCUS applied to Planck, H0LiCOW and SH0ES data, whose posteriors are shown as thin grey lines. Conventional (orange) is the standard Bayesian combination assuming equal weighting, w/Rescaling (blue) is equivalent to hyper-parameters, w/Shifts (brown) adds an unknown systemic error offset to each dataset, and w/Shifts ? Rescaling (green) combines hyper-parameters and systemic offsets. Image reproduced with permission from Bernal and Peacock (2018), copyright by IOP/ SISSA
Fig. 4 An illustration of BACCUS applied to Planck, H0LiCOW and SH0ES data, whose posteriors are shown as thin grey lines. Conventional (orange) is the standard Bayesian combination assuming equal weighting, w/Rescaling (blue) is equivalent to hyper-parameters, w/Shifts (brown) adds an unknown systemic error offset to each dataset, and w/Shifts ? Rescaling (green) combines hyper-parameters and systemic offsets. Image reproduced with permission from Bernal and Peacock (2018), copyright by IOP/ SISSACC-BY · From the PDF
Fig. 5 An illustration of Lutz-Kelker-Hanson population bias. Assume each parallax measurement can be in error by up to  d. In the figure on the left, there is a constant spatial density of stars. Then, the region ð -; - dÞ has a greater number of stars that can scatter to the observed parallax -than the region ð -; -þ dÞ and parallaxes are biased too low. Conversely in the figure on the right, the stellar density drops sharply beyond -due to either the edge of the population or magnitude limitations. More stars are available to scatter out than in, and parallaxes are biased too high
Fig. 5 An illustration of Lutz-Kelker-Hanson population bias. Assume each parallax measurement can be in error by up to  d. In the figure on the left, there is a constant spatial density of stars. Then, the region ð -; - dÞ has a greater number of stars that can scatter to the observed parallax -than the region ð -; -þ dÞ and parallaxes are biased too low. Conversely in the figure on the right, the stellar density drops sharply beyond -due to either the edge of the population or magnitude limitations. More stars are available to scatter out than in, and parallaxes are biased too highCC-BY · From the PDF
(a) Maser positions, velocities and acceleration
(a) Maser positions, velocities and accelerationCC-BY · From the PDF
(b) The accretion disk of UGC 3789 (maser spot positions are schematic, not actual).
(b) The accretion disk of UGC 3789 (maser spot positions are schematic, not actual).CC-BY · From the PDF
Fig. 6 The UGC 3789 maser system, showing the warped disk, velocities and acceleration of maser spots. The top left and top right figures show the LOS velocities in kms  1 relative to the central blackhole, offset by position in milliarcseconds; the GM / r curve shape is apparent. The top centre panel shows the LOS acceleration in kms  1 per year, calculated from the velocity drifts over 3 years of observations. In the bottom panel, we schematically show the warped disk and projected spots. UGC 3789 is at a distance of 46 Mpc so 1 mas ' 0 : 24 pc. The disk and maser spot data is available in Reid et al. (2013)
Fig. 6 The UGC 3789 maser system, showing the warped disk, velocities and acceleration of maser spots. The top left and top right figures show the LOS velocities in kms 1 relative to the central blackhole, offset by position in milliarcseconds; the GM / r curve shape is apparent. The top centre panel shows the LOS acceleration in kms 1 per year, calculated from the velocity drifts over 3 years of observations. In the bottom panel, we schematically show the warped disk and projected spots. UGC 3789 is at a distance of 46 Mpc so 1 mas ' 0 : 24 pc. The disk and maser spot data is available in Reid et al. (2013)CC-BY · From the PDF
Fig. 7 Illustration the Leavitt law in four galaxies used for the local distance ladder. The LMC and N4258 are the two main calibrators of Cepheid distances. For the two example SN Ia hosts N4536 and N1015, it is harder to observe the fainter, shorterperiod Cepheids. The slope is fixed at  3 : 26, corresponding to the best estimate global fit in Riess et al. (2016), and magnitudes are m W H . We have inverted the normal decreasing magnitude axis used in the literature for presentation purposes
Fig. 7 Illustration the Leavitt law in four galaxies used for the local distance ladder. The LMC and N4258 are the two main calibrators of Cepheid distances. For the two example SN Ia hosts N4536 and N1015, it is harder to observe the fainter, shorterperiod Cepheids. The slope is fixed at 3 : 26, corresponding to the best estimate global fit in Riess et al. (2016), and magnitudes are m W H . We have inverted the normal decreasing magnitude axis used in the literature for presentation purposesCC-BY · From the PDF
Image 10
CC-BY · From the PDF
Fig. 8 Illustration of Cepheid photometry from SN Ia host galaxies from Riess et al (Riess et al. 2016). U9391 is the most distant with a distance modulus of 32 : 92  0 : 06. The association of Cepheids with spiral arms is clearly visible, and in the bottom left is an example crowding correction for point sources and background flux. The scatter around the Leavitt law is  0 : 7 mag, thought to be due to residual crowding effects
Fig. 8 Illustration of Cepheid photometry from SN Ia host galaxies from Riess et al (Riess et al. 2016). U9391 is the most distant with a distance modulus of 32 : 92  0 : 06. The association of Cepheids with spiral arms is clearly visible, and in the bottom left is an example crowding correction for point sources and background flux. The scatter around the Leavitt law is  0 : 7 mag, thought to be due to residual crowding effectsCC-BY · From the PDF
Fig. 9 A PL calibration for Miras in the LMC. While non-linearity can straightforwardly be fitted, contamination must be kept under control. As seen in the bottom three panels, Wesenheit magnitudes have more scatter compared to standard magnitudes (the opposite of applying them to Cepheids), and they also hinder separating O-rich from C-rich stars. Image reproduced with permission from Yuan et al. (2017), copyright by AAS
Fig. 9 A PL calibration for Miras in the LMC. While non-linearity can straightforwardly be fitted, contamination must be kept under control. As seen in the bottom three panels, Wesenheit magnitudes have more scatter compared to standard magnitudes (the opposite of applying them to Cepheids), and they also hinder separating O-rich from C-rich stars. Image reproduced with permission from Yuan et al. (2017), copyright by AASCC-BY · From the PDF
Fig. 10 Fitting the TRGB edge from the colour-magnitude diagram of Freedman et al. (2019). The middle panel shows the horizontally-summed (between the blue lines) and smoothed number count, from which the edge is determined by the maximum (vertical) gradient, which is the peak in the right-hand panel. The background AGB population is visible in the stars above the tip
Fig. 10 Fitting the TRGB edge from the colour-magnitude diagram of Freedman et al. (2019). The middle panel shows the horizontally-summed (between the blue lines) and smoothed number count, from which the edge is determined by the maximum (vertical) gradient, which is the peak in the right-hand panel. The background AGB population is visible in the stars above the tipCC-BY · From the PDF
Fig. 11 Comparison of TRGB and Cepheid distance moduli, from which it can be seen TRGB distances are consistently larger across a range of galaxies. The red dots are SN Ia host galaxies, the grey dots other galaxies, and the blue star is the LMC TRGB calibrator. Image reproduced with permission from Freedman et al. (2019), copyright by AAS
Fig. 11 Comparison of TRGB and Cepheid distance moduli, from which it can be seen TRGB distances are consistently larger across a range of galaxies. The red dots are SN Ia host galaxies, the grey dots other galaxies, and the blue star is the LMC TRGB calibrator. Image reproduced with permission from Freedman et al. (2019), copyright by AASCC-BY · From the PDF
Fig. 12 Pantheon SN Ia distance moduli and residuals versus a best fit K CDM cosmology. Image reproduced with permission from Scolnic et al. (2018), copyright by AAS
Fig. 12 Pantheon SN Ia distance moduli and residuals versus a best fit K CDM cosmology. Image reproduced with permission from Scolnic et al. (2018), copyright by AASCC-BY · From the PDF
Fig. 13 H 0 posterior distribution for the events GW190814 and GW170814, which was localised to a region in the DES survey footprint containing  1800 possible host galaxies. The light and dark blue lines represent the dark approach for each siren, which can be compared to the gray dashed line for GW170814 which was localised to one galaxy by its electromagnetic counterpart. The estimate for this bright standard siren can be improved by the addition of the dark sirens, as shown in dark red line. The posteriors of Planck (Planck Collaboration 2020) and SH0ES (Riess et al. 2019) are shown in purple boxes as a guide. Image reproduced with permission from Palmese et al. (2020), copyright by AAS
Fig. 13 H 0 posterior distribution for the events GW190814 and GW170814, which was localised to a region in the DES survey footprint containing  1800 possible host galaxies. The light and dark blue lines represent the dark approach for each siren, which can be compared to the gray dashed line for GW170814 which was localised to one galaxy by its electromagnetic counterpart. The estimate for this bright standard siren can be improved by the addition of the dark sirens, as shown in dark red line. The posteriors of Planck (Planck Collaboration 2020) and SH0ES (Riess et al. 2019) are shown in purple boxes as a guide. Image reproduced with permission from Palmese et al. (2020), copyright by AASCC-BY · From the PDF
Fig. 14 A beautiful illustration of the BAO peak in the redshift bin 0 : 4 \ z \ 0 : 6 of BOSS DR12. The lefthand panel shows the power spectrum along and transverse to the line of sight, and the right-hand panel is the two-point correlation function. The anisotropy visible in the graphs breaks the d 2 AH  1 degeneracy. Image reproduced with permission from Alam et al. (2017), copyright by the authors
Fig. 14 A beautiful illustration of the BAO peak in the redshift bin 0 : 4 \ z \ 0 : 6 of BOSS DR12. The lefthand panel shows the power spectrum along and transverse to the line of sight, and the right-hand panel is the two-point correlation function. The anisotropy visible in the graphs breaks the d 2 AH 1 degeneracy. Image reproduced with permission from Alam et al. (2017), copyright by the authorsCC-BY · From the PDF
Image 18
CC-BY · From the PDF
Fig. 15 A schematic of how the sound horizon determines H 0. We observe the angular peak spacing h s , and calculate rs from the pre-combination universe given a model for the sound speed and expansion history there. The comoving distance v s is then used to solve for H 0 given how v s evolves in the postrecombination universe. The box gives the flat K CDM formula for this. This figure is our version of Antony Lewis' original at https://cosmologist.info
Fig. 15 A schematic of how the sound horizon determines H 0. We observe the angular peak spacing h s , and calculate rs from the pre-combination universe given a model for the sound speed and expansion history there. The comoving distance v s is then used to solve for H 0 given how v s evolves in the postrecombination universe. The box gives the flat K CDM formula for this. This figure is our version of Antony Lewis' original at https://cosmologist.infoCC-BY · From the PDF
Fig. 16 The binned Planck power spectrum for TT and residuals to the best fit K CDM model. The vertical line delineates the different methodology used to resolve the power spectrum at l \ 30. Note that the figure shows the power spectrum of the temperature T, not of the anisotropies H . Image reproduced with permission from Planck Collaboration (2020), copyright by ESO
Fig. 16 The binned Planck power spectrum for TT and residuals to the best fit K CDM model. The vertical line delineates the different methodology used to resolve the power spectrum at l \ 30. Note that the figure shows the power spectrum of the temperature T, not of the anisotropies H . Image reproduced with permission from Planck Collaboration (2020), copyright by ESOCC-BY · From the PDF
Fig. 17 K CDM tensions in the rd  H 0 plane. x m is the physical matter density X mh 2 and r drag s  rd is the sound horizon from the end of the baryon drag epoch. There is no combination of values in standard, flat K CDM that can explain observations. Image reproduced with permission from Knox and Millea (2020), copyright by APS
Fig. 17 K CDM tensions in the rd H 0 plane. x m is the physical matter density X mh 2 and r drag s  rd is the sound horizon from the end of the baryon drag epoch. There is no combination of values in standard, flat K CDM that can explain observations. Image reproduced with permission from Knox and Millea (2020), copyright by APSCC-BY · From the PDF
Image 22
CC-BY · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Research works printed but not linked: 5

  1. Cox JP (1960) Theory of stellar pulsation, Princeton series in astrophysics, vol 31, Princeton legacy library edition edn. Princeton University Press
  2. Efstathiou G (2020) A Lockdown Perspective on the Hubble Tension. arXiv:2007.10716 · arXiv
  3. Efstathiou GP, Gratton S (2019) A detailed description of the CamSpec likelihood pipeline and a reanalysis of the Planck high frequency maps. arXiv:1910.00483 · arXiv
  4. Hogg DW (1999) Distance measures in cosmology. arXiv:astro-ph/9905116 [astro-ph] · arXiv
  5. Tully RB, Fisher J (1977) A new method of determining distances to galaxies. A&A 54:661–673

Cited by

See all 196

Metadata

Authors
Shah, P., Lemos, P., & Lahav, O.
Affiliations
  • University College London (GB)
  • University of Sussex (GB)
Corresponding author
Lahav, Ofer
Venue
The Astronomy and Astrophysics Review
Published
2021-12
Volume
29
Issue
1
ISSN
  • 0935-4956 (ISSN-L)
  • 1432-0754
OpenAlex
W3196381787
Cited by
196
References
177
Citations by year
2026: 27 · 2025: 45 · 2024: 38 · 2023: 38 · 2022: 43 · 2021: 5
FWCI
16.66
Type
journal article
Language
en
Open access
Licence
Locations
  • The Astronomy and Astrophysics Review (publishedVersion, cc-by)
  • arXiv (Cornell University) (submittedVersion)
  • UCL Discovery (University College London) (submittedVersion)
  • arXiv (Cornell University) (cc-by)
Funders
Science and Technology Facilities Council (Consolidated Grant ST/R000476/1, Consolidated Grant ST/T000473/1)
Topics
  • Physical Sciences › Physics and Astronomy › Astronomy and Astrophysics › Cosmology and Gravitation Theories
  • Physical Sciences › Physics and Astronomy › Astronomy and Astrophysics › Galaxies: Formation, Evolution, Phenomena
  • Physical Sciences › Physics and Astronomy › Astronomy and Astrophysics › Stellar, planetary, and galactic studies
Keywords
Hubble constant, Hubble parameter, SH0ES, Planck CMB constraints, LambdaCDM model, cosmic distance scale

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.