CoChat

Hole-making processes and their impacts on the microstructure and fatigue response of aircraft alloys

Open access
Sun, Dan, Lemoine, Patrick, Keys, Daniel, Doyle, Patrick, Malinov, Savko, Zhao, Qing, Qin, Xuda, Jin, Yan · 2018 · The International Journal of Advanced Manufacturing Technology

The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.

Abstract

A comparative study on conventional drilling and helical milling has been reported under the context of aircraft alloy hole making. The impacts of these two different machining processes on the microstructures and the fatigue performance of different aircraft alloys have been elaborated. Results show that both alloys undergo more severe surface/subsurface plastic deformation under conventional drilling comparing to helical milling process. Helical milling leads to a longer coupon fatigue life compared to conventional drilling for both alloys. The fatigue life of Al 2024-T3 is significantly longer than that of Ti-6Al-4V under all machining conditions. The use of coolant generally produces less damaged surface and leads to enhanced fatigue performance of the machined alloys. In addition, the machined surface roughness has been studied to further elaborate the effects of different machining processes.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1007/s00170-016-9850-3

Cites

35 of 35 references verified0 citation errors · 0 not checkable

Statistics

Figures

Fig. 1 Schematic of the helical milling process [17]
Fig. 1 Schematic of the helical milling process [17]CC-BY · From the PDF
Image 2
CC-BY · From the PDF
Fig. 3 Average surface roughness measurements of hole surfaces of Al 2024-T3 and Ti-4Al-6V
Fig. 3 Average surface roughness measurements of hole surfaces of Al 2024-T3 and Ti-4Al-6VCC-BY · From the PDF
Fig. 4 SEM images of holes made on Al 2024-T3 alloy by a dry drilling, b lubricated drilling, c dry helical milling, d lubricated helical milling and e a recast layer or white layer on dry-drilled Al 2024-T3 hole surface
Fig. 4 SEM images of holes made on Al 2024-T3 alloy by a dry drilling, b lubricated drilling, c dry helical milling, d lubricated helical milling and e a recast layer or white layer on dry-drilled Al 2024-T3 hole surfaceCC-BY · From the PDF
Fig. 5 Nanoindentation measurements on a dry-drilled Al alloy recast layer. a An optical micrograph of the array of indents performed on a delaminated flake, near the edge of the drilled hole, as seen in Fig. 4e. b
Fig. 5 Nanoindentation measurements on a dry-drilled Al alloy recast layer. a An optical micrograph of the array of indents performed on a delaminated flake, near the edge of the drilled hole, as seen in Fig. 4e. bCC-BY · From the PDF
Fig. 6 SEM images of holes made on Ti-4Al-6Valloy by a dry drilling, b lubricated drilling, c dry helical milling and d lubricated helical milling
Fig. 6 SEM images of holes made on Ti-4Al-6Valloy by a dry drilling, b lubricated drilling, c dry helical milling and d lubricated helical millingCC-BY · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 35 references

Cited by

Metadata

Authors
Sun, D., Lemoine, P., Keys, D., Doyle, P., Malinov, S., Zhao, Q., Qin, X., & Jin, Y.
Affiliations
  • Queen's University Belfast (GB)
  • University of Ulster (GB)
  • Tianjin University (CN)
Corresponding author
Sun, Dan
Venue
The International Journal of Advanced Manufacturing Technology
Published
2016-12-14
Volume
94
Issue
5-8
Pages
1719-1726
ISSN
  • 0268-3768 (ISSN-L)
  • 1433-3015
OpenAlex
W2564393185
Cited by
80
References
35
Citations by year
2026: 5 · 2025: 6 · 2024: 10 · 2023: 10 · 2022: 14 · 2021: 11 · 2020: 13 · 2019: 4 · 2018: 5 · 2017: 2
FWCI
3.26
Type
journal article
Language
en
Open access
Locations
  • The International Journal of Advanced Manufacturing Technology (publishedVersion, cc-by)
  • Research Portal (Queen's University Belfast) (submittedVersion, cc-by)
Funders
  • Engineering and Physical Sciences Research Council (EP/K004964/1)
  • NSF China (No. 51420105007)
  • Horizon 2020 (734272)
Topics
  • Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization
  • Physical Sciences › Engineering › Mechanics of Materials › Fatigue and fracture mechanics
  • Physical Sciences › Engineering › Mechanical Engineering › Surface Treatment and Residual Stress
Keywords
conventional drilling, helical milling, aerospace alloys, fatigue life, microstructure, 2024-T3 aluminum alloy, Ti-6Al-4V, machining coolants, surface roughness

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.