Hole-making processes and their impacts on the microstructure and fatigue response of aircraft alloys
Open accessThe DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Abstract
A comparative study on conventional drilling and helical milling has been reported under the context of aircraft alloy hole making. The impacts of these two different machining processes on the microstructures and the fatigue performance of different aircraft alloys have been elaborated. Results show that both alloys undergo more severe surface/subsurface plastic deformation under conventional drilling comparing to helical milling process. Helical milling leads to a longer coupon fatigue life compared to conventional drilling for both alloys. The fatigue life of Al 2024-T3 is significantly longer than that of Ti-6Al-4V under all machining conditions. The use of coolant generally produces less damaged surface and leads to enhanced fatigue performance of the machined alloys. In addition, the machined surface roughness has been studied to further elaborate the effects of different machining processes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures
![Fig. 1 Schematic of the helical milling process [17]](https://figures.cochat.ai/paper-figures/6094aab368e6456c9e5f87a5132f4461/hole-making-processes-and-their-impacts-on-the-microstructure-and-fatigue-figure-1.png)





Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Oliver, W. C., & Pharr, G. M. (1992) · Journal of Materials Research · doi:10.1557/jmr.1992.1564 · Cited by 26,961
Titanium and Titanium Alloys: Fundamentals and Applications
(2003) · Wiley eBooks · doi:10.1002/3527602119 · Cited by 3,108
High performance cutting of advanced aerospace alloys and composite materials
M'Saoubi, R., Axinte, D., Soo, S. L., Nobel, C., Attia, H., Kappmeyer, G., Engin, S., & Sim, W.-M. (2015) · CIRP Annals · doi:10.1016/j.cirp.2015.05.002 · Cited by 567
The effect of machining on surface integrity of titanium alloy Ti–6% Al–4% V
Che-Haron, C. H., & Jawaid, A. (2005) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2004.08.012 · Cited by 491
A comprehensive experimental study on surface integrity by end milling Ti–6Al–4V
Sun, J., & Guo, Y. B. (2009) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2008.09.022 · Cited by 317
Tool life and surface integrity in turning titanium alloy
Che-Haron, C. H. (2001) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(01)00926-8 · Cited by 299
Drilling Burr Formation in Titanium Alloy, Ti-6AI-4V
Dornfeld, D. A., Kim, J. S., Dechow, H., Hewson, J., & Chen, L. J. (1999) · CIRP Annals · doi:10.1016/s0007-8506(07)63134-5 · Cited by 168
(2016) · CRC Press eBooks · doi:10.1201/b13044 · Cited by 159
MECHANICAL DRILLING PROCESSES FOR TITANIUM ALLOYS: A LITERATURE REVIEW
Zhang, P. F., Churi, N. J., Pei, Z. J., & Treadwell, C. (2008) · Machining Science and Technology · doi:10.1080/10910340802519379 · Cited by 134
Helical milling: An enabling technology for hard machining precision holes in AISI D2 tool steel
Iyer, R. M., Koshy, P., & Ng, E. (2006) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2006.04.006 · Cited by 127
Prediction of machining-induced phase transformation and grain growth of Ti-6Al-4 V alloy
Pan, Z., Liang, S. Y., Garmestani, H., & Shih, D. S. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-8497-4 · Cited by 93
Effect of Current in the EDM Machining of Aluminum 6061 T6 and its Effect on the Surface Morphology
Arooj, S., Shah, M., Sadiq, S. M., Jaffery, S. H. I., & Khushnood, S. (2014) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-014-1020-z · Cited by 89
Tool wear and hole quality investigation in dry helical milling of Ti-6Al-4V alloy
Li, H., He, G., Qin, X., Wang, G., Lu, C., & Gui, L. (2014) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-013-5570-0 · Cited by 84
Self-citationMachining and Machinability of Aluminum Alloys
Songmene, V. M., Khettabi, R., Zaghbani, I., Kouam, J., & Djebar, A. (2011) · InTech eBooks · doi:10.5772/14888 · Cited by 84
Nouari, M., & Makich, H. (2014) · Metals · doi:10.3390/met4030335 · Cited by 78
HOLE MAKING USING BALL HELICAL MILLING ON TITANIUM ALLOYS
Olvera, D., de Lacalle, L. N. L., Urbikaín, G., Lamíkiz, A., Rodal, P., & Zamakona, I. (2012) · Machining Science and Technology · doi:10.1080/10910344.2012.673958 · Cited by 77
Modelling of cutting forces in orbital drilling of titanium alloy Ti–6Al–4V
Rey, P.-A., Dref, J. L., Senatore, J., & Landon, Y. (2016) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2016.04.006 · Cited by 72
A dynamic feature information model for integrated manufacturing planning and optimization
Li, Y., Liu, X., Gao, J. X., & Maropoulos, P. (2012) · CIRP Annals · doi:10.1016/j.cirp.2012.03.085 · Cited by 64
3D FEM simulation of helical milling hole process for titanium alloy Ti-6Al-4V
Ji, C., Li, Y., Qin, X., Zhao, Q. Z., Sun, D., & Jin, Y. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7323-8 · Cited by 62
Self-citationSurface Integrity and Fatigue Behavior for High-Speed Milling Ti–10V–2Fe–3Al Titanium Alloy
Yao, C., Tan, L., Ren, J., Lin, Q., & Liang, Y. S. (2013) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-013-9772-4 · Cited by 55
The effect of tool edge preparation on tool life and workpiece surface integrity
Hughes, J. I., Sharman, A. R. C., & Ridgway, K. (2004) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1243/0954405041897086 · Cited by 53
Tool life and hole surface integrity studies for hole-making of Ti6Al4V alloy
Zhao, Q. Z., Qin, X., Ji, C., Li, Y., Sun, D., & Jin, Y. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-6890-z · Cited by 51
Self-citationHelical Feed Milling with MQL for Boring of Aluminum Alloy
SASAHARA, H., Kawasaki, M., & Tsutsumi, M. (2008) · Journal of Advanced Mechanical Design Systems and Manufacturing · doi:10.1299/jamdsm.2.1030 · Cited by 43
Effect of detail design on fatigue performance of fastener hole
Li, X., Xu, H., Zhai, H., & Yue, Z. F. (2009) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2009.08.016 · Cited by 43
Reißig, L., Völkl, R., Mills, M. J., & Glatzel, U. (2003) · Scripta Materialia · doi:10.1016/j.scriptamat.2003.09.023 · Cited by 41
Liu, C., Li, Y., & Shen, W. (2014) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-6246-0 · Cited by 40
Li, Y., Lee, C.-H., & Gao, J. X. (2015) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1177/0954405414560622 · Cited by 35
Liu, C., Li, Y., & Hao, X. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-9647-4 · Cited by 27
A multi-perspective dynamic feature concept in adaptive NC machining of complex freeform surfaces
Liu, X., Li, Y., & Gao, J. X. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7456-9 · Cited by 21
Effect of drilling process on fatigue life of open holes
Gu, W., Xu, H., Liu, J., & Yue, Z. (2009) · Tsinghua Science & Technology · doi:10.1016/s1007-0214(10)70031-6 · Cited by 16
Comparative Study on Helical Milling and Drilling of Ti-6Al-4V
Qin, X., Sun, X. T., Wang, Q., Chen, S. M., & Li, H. (2012) · Key engineering materials · doi:10.4028/www.scientific.net/kem.499.200 · Cited by 14
Self-citationInterim feature-based cutting parameter optimization for aircraft structural parts
Liu, C., Li, Y., Zhou, X., & Shen, W. (2014) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-6487-y · Cited by 11
Latger, F., Harris, T., & Björklund, S. (2002) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2002-01-2632 · Cited by 10
Effect of Drilling Processes on Surface Integrity of 7075-Aluminum Alloy Holes
Xu-ming, P., Chen, W., Bing-yi, R., & Yu, H. (2002) · Cited by 5
Xu, J., Xia, K., Xu, Z., Zhang, L., Yu, Z., & Yu, H. (2015) · IEEE International Conference on Mechatronics and Automation (ICMA) · doi:10.1109/icma.2015.7237886 · Cited by 2
Cited by
A review: drilling performance and hole quality of aluminium alloys for aerospace applications
Aamir, M., Giasin, K., Tolouei-Rad, M., & Vafadar, A. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.09.003 · Cited by 286
A review of helical milling process
Pereira, R. B. D., Brandão, L. C., de Paiva, A. P., Ferreira, J. R., & Davim, J. P. (2017) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2017.05.002 · Cited by 185
Ge, J., Catalanotti, G., Falzon, B. G., McClelland, J., Higgins, C., Jin, Y., & Sun, D. (2022) · Composites Part B Engineering · doi:10.1016/j.compositesb.2022.109752 · Cited by 115
Self-citationMechanism for material removal in ultrasonic vibration helical milling of Ti 6Al 4V alloy
Chen, G., Ren, C., Zou, Y., Qin, X., Lu, L., & Li, S. (2018) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2018.11.001 · Cited by 102
Self-citationAamir, M., Tu, S., Tolouei-Rad, M., Giasin, K., & Vafadar, A. (2020) · Materials · doi:10.3390/ma13030680 · Cited by 86
“Fatigue cracks normally initiate and propagate after the fastened holes create regions of concentrated stress; therefore, the reliability of aircraft structures depends on their fatigue life, which is directly related to hole quality [3].”
Background
Metadata
- Authors
- Sun, D., Lemoine, P., Keys, D., Doyle, P., Malinov, S., Zhao, Q., Qin, X., & Jin, Y.
- Affiliations
- Queen's University Belfast (GB)
- University of Ulster (GB)
- Tianjin University (CN)
- Corresponding author
- Sun, Dan
- Venue
- The International Journal of Advanced Manufacturing Technology
- Published
- 2016-12-14
- Volume
- 94
- Issue
- 5-8
- Pages
- 1719-1726
- ISSN
- 0268-3768 (ISSN-L)
- 1433-3015
- OpenAlex
- W2564393185
- Cited by
- 80
- References
- 35
- Citations by year
- 2026: 5 · 2025: 6 · 2024: 10 · 2023: 10 · 2022: 14 · 2021: 11 · 2020: 13 · 2019: 4 · 2018: 5 · 2017: 2
- FWCI
- 3.26
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Locations
- The International Journal of Advanced Manufacturing Technology (publishedVersion, cc-by)
- Research Portal (Queen's University Belfast) (submittedVersion, cc-by)
- Funders
- Engineering and Physical Sciences Research Council (EP/K004964/1)
- NSF China (No. 51420105007)
- Horizon 2020 (734272)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization
- Physical Sciences › Engineering › Mechanics of Materials › Fatigue and fracture mechanics
- Physical Sciences › Engineering › Mechanical Engineering › Surface Treatment and Residual Stress
- Keywords
- conventional drilling, helical milling, aerospace alloys, fatigue life, microstructure, 2024-T3 aluminum alloy, Ti-6Al-4V, machining coolants, surface roughness
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.