Hole-making processes and their impacts on the microstructure and fatigue response of aircraft alloys
Open accessThe DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Abstract
A comparative study on conventional drilling and helical milling has been reported under the context of aircraft alloy hole making. The impacts of these two different machining processes on the microstructures and the fatigue performance of different aircraft alloys have been elaborated. Results show that both alloys undergo more severe surface/subsurface plastic deformation under conventional drilling comparing to helical milling process. Helical milling leads to a longer coupon fatigue life compared to conventional drilling for both alloys. The fatigue life of Al 2024-T3 is significantly longer than that of Ti-6Al-4V under all machining conditions. The use of coolant generally produces less damaged surface and leads to enhanced fatigue performance of the machined alloys. In addition, the machined surface roughness has been studied to further elaborate the effects of different machining processes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures
![Fig. 1 Schematic of the helical milling process [17]](https://figures.cochat.ai/paper-figures/6094aab368e6456c9e5f87a5132f4461/hole-making-processes-and-their-impacts-on-the-microstructure-and-fatigue-figure-1.png)





Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Oliver, W. C., & Pharr, G. M. (1992) · Journal of Materials Research · doi:10.1557/jmr.1992.1564 · Cited by 26,961 · cited 1×
“Nanoindentation experiments were carried out with a nanoindenter XP from Keysight equipped with a Berkovitch diamond tip, calibrated on fused silica using the Oliver and Pharr method [18].”
MethodTitanium and Titanium Alloys: Fundamentals and Applications
(2003) · Wiley eBooks · doi:10.1002/3527602119 · Cited by 3,108 · cited 1×
“This is similar to the findings in the published literatures [14, 19, 20].”
ResultHigh performance cutting of advanced aerospace alloys and composite materials
M'Saoubi, R., Axinte, D., Soo, S. L., Nobel, C., Attia, H., Kappmeyer, G., Engin, S., & Sim, W.-M. (2015) · CIRP Annals · doi:10.1016/j.cirp.2015.05.002 · Cited by 567 · cited 1×
“the plastically deformed region found in the drilled coupon subsurface can be a combined result of elevated temperature and the mechanical stresses resulting from the continuous drilling operation [24].”
BackgroundThe effect of machining on surface integrity of titanium alloy Ti–6% Al–4% V
Che-Haron, C. H., & Jawaid, A. (2005) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2004.08.012 · Cited by 491 · cited 2×
“Due to the poor machinability of titanium alloys, the alloy surface is easily damaged during machining and studies have shown significant microstructure alteration and smearing appearing as a white layer in microstructural analysis [14, 15].”
BackgroundResultA comprehensive experimental study on surface integrity by end milling Ti–6Al–4V
Sun, J., & Guo, Y. B. (2009) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2008.09.022 · Cited by 317
Tool life and surface integrity in turning titanium alloy
Che-Haron, C. H. (2001) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(01)00926-8 · Cited by 299 · cited 1×
“Due to the poor machinability of titanium alloys, the alloy surface is easily damaged during machining and studies have shown significant microstructure alteration and smearing appearing as a white layer in microstructural analysis [14, 15].”
BackgroundDrilling Burr Formation in Titanium Alloy, Ti-6AI-4V
Dornfeld, D. A., Kim, J. S., Dechow, H., Hewson, J., & Chen, L. J. (1999) · CIRP Annals · doi:10.1016/s0007-8506(07)63134-5 · Cited by 168
(2016) · CRC Press eBooks · doi:10.1201/b13044 · Cited by 159 · cited 1×
“Metal is extruded by the chisel edge and shear cutting is performed by the lips of the tool [2].”
MethodMECHANICAL DRILLING PROCESSES FOR TITANIUM ALLOYS: A LITERATURE REVIEW
Zhang, P. F., Churi, N. J., Pei, Z. J., & Treadwell, C. (2008) · Machining Science and Technology · doi:10.1080/10910340802519379 · Cited by 134 · cited 1×
“concern, particularly in titanium alloys [6].”
Helical milling: An enabling technology for hard machining precision holes in AISI D2 tool steel
Iyer, R. M., Koshy, P., & Ng, E. (2006) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2006.04.006 · Cited by 127 · cited 2×
“[3] have shown that helical milling is capable of machining H7 (H7 is the standard drilled hole tolerance for aerospace metals and requires that the diameter does not vary bymore than 0.”
Background
Cited by
A review: drilling performance and hole quality of aluminium alloys for aerospace applications
Aamir, M., Giasin, K., Tolouei-Rad, M., & Vafadar, A. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.09.003 · Cited by 286
“These tructures usually undergo constant shock and vibration durng aircraft service which could promote fatigue failure due to yclic loading below the material yield strength [16].”
BackgroundMethodInfluentialA review of helical milling process
Pereira, R. B. D., Brandão, L. C., de Paiva, A. P., Ferreira, J. R., & Davim, J. P. (2017) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2017.05.002 · Cited by 185
Ge, J., Catalanotti, G., Falzon, B. G., McClelland, J., Higgins, C., Jin, Y., & Sun, D. (2022) · Composites Part B Engineering · doi:10.1016/j.compositesb.2022.109752 · Cited by 115
Self-citationMechanism for material removal in ultrasonic vibration helical milling of Ti 6Al 4V alloy
Chen, G., Ren, C., Zou, Y., Qin, X., Lu, L., & Li, S. (2018) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2018.11.001 · Cited by 102
Self-citationAamir, M., Tu, S., Tolouei-Rad, M., Giasin, K., & Vafadar, A. (2020) · Materials · doi:10.3390/ma13030680 · Cited by 86
“Fatigue cracks normally initiate and propagate after the fastened holes create regions of concentrated stress; therefore, the reliability of aircraft structures depends on their fatigue life, which is directly related to hole quality [3].”
Background
Metadata
- Authors
- Sun, D., Lemoine, P., Keys, D., Doyle, P., Malinov, S., Zhao, Q., Qin, X., & Jin, Y.
- Affiliations
- Queen's University Belfast (GB)
- University of Ulster (GB)
- Tianjin University (CN)
- Corresponding author
- Sun, Dan
- Venue
- The International Journal of Advanced Manufacturing Technology
- Published
- 2016-12-14
- Volume
- 94
- Issue
- 5-8
- Pages
- 1719-1726
- ISSN
- 0268-3768 (ISSN-L)
- 1433-3015
- OpenAlex
- W2564393185
- Cited by
- 80
- References
- 35
- Citations by year
- 2026: 5 · 2025: 6 · 2024: 10 · 2023: 10 · 2022: 14 · 2021: 11 · 2020: 13 · 2019: 4 · 2018: 5 · 2017: 2
- FWCI
- 3.26
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Locations
- The International Journal of Advanced Manufacturing Technology (publishedVersion, cc-by)
- Research Portal (Queen's University Belfast) (submittedVersion, cc-by)
- Funders
- Engineering and Physical Sciences Research Council (EP/K004964/1)
- NSF China (No. 51420105007)
- Horizon 2020 (734272)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization
- Physical Sciences › Engineering › Mechanics of Materials › Fatigue and fracture mechanics
- Physical Sciences › Engineering › Mechanical Engineering › Surface Treatment and Residual Stress
- Keywords
- conventional drilling, helical milling, aerospace alloys, fatigue life, microstructure, 2024-T3 aluminum alloy, Ti-6Al-4V, machining coolants, surface roughness
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.