Optimization of material extrusion additive manufacturing process parameters for polyether ketone ketone (PEKK)
Integrity signals
Registry
Cites
Statistics
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
Differences in porosity, rather than crystallinity, were responsible for the variations in mechanical properties among different PEKK sample groups.
“Additionally, the studies found that differences in porosity, rather than crystallinity, were responsible for the variations in mechanical properties among the different sample groups”
From A comprehensive review of lunar-based manufacturing and construction (2024) · cites this paper as [220]
Build orientation had the most significant influence on tensile properties of PEKK samples, followed by the number of contours, resulting in variations in Young's modulus and elongation at break.
“Their research revealed that build orientation had the most significant influence on tensile properties (similar to the results obtained in [175] for PEEK), followed by the number of contours, resulting in variations in Young's modulus and elongation at break.”
From A comprehensive review of lunar-based manufacturing and construction (2024) · cites this paper as [220]
Increased contours in PEKK samples were associated with reduced porosity and improved mechanical and dynamic mechanical properties.
“Specifically, increased contours were associated with reduced porosity and improved mechanical and dynamic mechanical properties [219,220].”
From A comprehensive review of lunar-based manufacturing and construction (2024) · cites this paper as [220]
Cites
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299 · see citing works
Anisotropic material properties of fused deposition modeling ABS
Ahn, S., Montero, M., Odell, D., Roundy, S., & Wright, P. K. (2002) · Rapid Prototyping Journal · doi:10.1108/13552540210441166 · Cited by 2,396 · see citing works
Chacón, J. M., Caminero, M. Á., Plaza, E. G., et al. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.03.065 · Cited by 1,619 · see citing works
Parametric appraisal of mechanical property of fused deposition modelling processed parts
Sood, A. K., Ohdar, R., & Mahapatra, S. S. (2009) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2009.06.016 · Cited by 1,332 · see citing works
Effect of processing conditions on the bonding quality of FDM polymer filaments
Sun, Q., Rizvi, G. M., Bellehumeur, C. T., & Gu, P. (2008) · Rapid Prototyping Journal · doi:10.1108/13552540810862028 · Cited by 1,285 · see citing works
Tymrak, B., Kreiger, M. A., & Pearce, J. M. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.02.038 · Cited by 1,259 · see citing works
Wu, W., Geng, P., Li, G., Zhao, D., Zhang, H., & Zhao, J. X. (2015) · Materials · doi:10.3390/ma8095271 · Cited by 882 · see citing works
Fused deposition modeling with polypropylene
Carneiro, O. S., da Silva, A. F., & Gomes, R. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.06.053 · Cited by 856 · see citing works
Menczel, J. D., & Prime, R. B. (2008) · Wiley eBooks · doi:10.1002/9780470423837 · Cited by 668 · see citing works
Lanzotti, A., Grasso, M., Staiano, G., et al. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-09-2014-0135 · Cited by 653 · see citing works
Durgun, İ., & Ertan, R. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-10-2012-0091 · Cited by 532 · see citing works
Fused deposition modelling with ABS–graphene nanocomposites
Dul, S., Fambri, L., & Pegoretti, A. (2016) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.03.013 · Cited by 497 · see citing works
The importance of carbon fiber to polymer additive manufacturing
Love, L. J., Kunc, V., Rios, O. R., Duty, C., Elliott, A. M., Post, B., Smith, R. J., & Blue, C. A. (2014) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2014.212 · Cited by 495 · see citing works
Wang, P., Zou, B., Xiao, H., Ding, S., & Huang, C. (2019) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2019.03.016 · Cited by 462 · see citing works
Caminero, M. Á., Chacón, J. M., García-Moreno, I., & Reverte, J. M. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2018.04.038 · Cited by 422 · see citing works
Ding, S., Zou, B., Wang, P., & Ding, H. (2019) · Polymer Testing · doi:10.1016/j.polymertesting.2019.105948 · Cited by 351 · see citing works
Caminero, M. Á., Chacón, J. M., Plaza, E. G., López, P. J. N., Reverte, J. M., & Bécar, J. P. (2019) · Polymers · doi:10.3390/polym11050799 · Cited by 319 · see citing works
3D printed continuous CF/PA6 composites: Effect of microscopic voids on mechanical performance
He, Q., Wang, H., Fu, K., et al. (2020) · Composites Science and Technology · doi:10.1016/j.compscitech.2020.108077 · Cited by 311 · see citing works
Wang, X., Zhao, L., Fuh, J. Y. H., et al. (2019) · Polymers · doi:10.3390/polym11071154 · Cited by 310 · see citing works
Additive layer manufacturing of poly (ether ether ketone) via FDM
Rinaldi, M., Ghidini, T., Cecchini, F., Brandao, A., & Nanni, F. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.03.029 · Cited by 301 · see citing works
Thermal Structures for Aerospace Applications
Thornton, E. A. (1996) · American Institute of Aeronautics and Astronautics eBooks · doi:10.2514/4.862540 · Cited by 299 · see citing works
Zaldivar, R. J., Witkin, D. B., McLouth, T. D., Patel, D., Schmitt, K., & Nokes, J. P. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.11.007 · Cited by 278 · see citing works
Enhancement of Mechanical Properties of FDM‐PLA Parts via Thermal Annealing
Wach, R. A., Wolszczak, P., & Adamus-Włodarczyk, A. (2018) · Macromolecular Materials and Engineering · doi:10.1002/mame.201800169 · Cited by 257 · see citing works
Onwubolu, G. C., & Rayegani, F. (2014) · International Journal of Manufacturing Engineering · doi:10.1155/2014/598531 · Cited by 252 · see citing works
Arif, M. F., Alhashmi, H., Varadarajan, K. M., Koo, J. H., Hart, A. J., & Kumar, S. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107625 · Cited by 245 · see citing works
FRIEDRICH, K. (2004) · Composites Science and Technology · doi:10.1016/j.compscitech.2004.06.008 · Cited by 238 · see citing works
Semi-crystalline feedstock for filament-based 3D printing of polymers
Vaes, D., & Puyvelde, P. V. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2021.101411 · Cited by 235 · see citing works
Controlling toughness and strength of FDM 3D-printed PLA components through the raster layup
Kiendl, J., & Gao, C. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107562 · Cited by 206 · see citing works
Kantaros, A., & Karalekas, D. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.02.067 · Cited by 201 · see citing works
Investigation of infill-patterns on mechanical response of 3D printed poly-lactic-acid
Aloyaydi, B. A., Sivasankaran, S., & Mustafa, A. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106557 · Cited by 194 · see citing works
On Surface Finish and Dimensional Accuracy of FDM Parts after Cold Vapor Treatment
Garg, A., Bhattacharya, A., & Batish, A. (2015) · Materials and Manufacturing Processes · doi:10.1080/10426914.2015.1070425 · Cited by 192 · see citing works
Gebisa, A. W., & Lemu, H. G. (2018) · Materials · doi:10.3390/ma11040500 · Cited by 188 · see citing works
Low earth orbit space environment simulation and its effects on graphite/epoxy composites
Han, J., & Kim, C. (2004) · Composite Structures · doi:10.1016/j.compstruct.2004.11.007 · Cited by 161 · see citing works
Li, Q., Zhao, W. G., Li, Y., Yang, W., & Wang, G. (2019) · Polymers · doi:10.3390/polym11040656 · Cited by 156 · see citing works
Raster angle mechanics in fused deposition modelling
Huang, B., & Singamneni, S. (2014) · Journal of Composite Materials · doi:10.1177/0021998313519153 · Cited by 154 · see citing works
Mohamed, O. A., Masood, S. H., Bhowmik, J., et al. (2016) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-016-2157-6 · Cited by 144 · see citing works
Studies on Parametric Optimization for Fused Deposition Modelling Process
Nidagundi, V. B., Keshavamurthy, R., & Prakash, C. (2015) · Materials Today Proceedings · doi:10.1016/j.matpr.2015.07.097 · Cited by 129 · see citing works
Effects of material properties on warpage in fused deposition modeling parts
Fitzharris, E. R., Watanabe, N., Rosen, D. W., et al. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-1340-8 · Cited by 128 · see citing works
Quero, R. F., da Silveira, G. D., da Silva, J. A. F., et al. (2021) · Lab on a Chip · doi:10.1039/d1lc00518a · Cited by 126 · see citing works
Influence of fused deposition modeling parameters on the mechanical properties of ABS parts
Vicente, C. M. S., Martins, T. S., Leite, M., Ribeiro, A., & Reis, L. G. (2019) · Polymers for Advanced Technologies · doi:10.1002/pat.4787 · Cited by 125 · see citing works
Vyavahare, S. S., Kumar, S., & Panghal, D. (2020) · Rapid Prototyping Journal · doi:10.1108/rpj-12-2019-0315 · Cited by 118 · see citing works
Test Method for Compressive Properties of Rigid Plastics
D20 Committee (2015) · doi:10.1520/d0695-15 · Cited by 111 · see citing works
Altan, M., Eryıldız, M., Gümüş, B. E., et al. (2018) · Materials Testing · doi:10.3139/120.111178 · Cited by 110 · see citing works
Niutta, C. B., Ciardiello, R., & Tridello, A. (2022) · Polymers · doi:10.3390/polym14061116 · Cited by 83 · see citing works
Study on surface texture of Fused Deposition Modeling
Reddy, V. V., Flys, O., Chaparala, A., et al. (2018) · Procedia Manufacturing · doi:10.1016/j.promfg.2018.06.108 · Cited by 69 · see citing works
Optimization of FDM process parameters for dual extruder 3d printer using Artificial Neural network
Giri, J. P., Shahane, P., Jachak, S. R., Chadge, R., & Giri, P. J. (2021) · Materials Today Proceedings · doi:10.1016/j.matpr.2021.01.899 · Cited by 69 · see citing works
Strength to cost ratio analysis of FDM Nylon 12 3D Printed Parts
Mostafa, K. G., Montemagno, C. D., & Qureshi, A. J. (2018) · Procedia Manufacturing · doi:10.1016/j.promfg.2018.07.086 · Cited by 66 · see citing works
Mishra, A. K., Chavan, H., & Kumar, A. (2021) · Materials Today Proceedings · doi:10.1016/j.matpr.2021.02.276 · Cited by 62 · see citing works
Topological optimization of 3D printed bone analog with PEKK for surgical mandibular reconstruction
Cheng, K., Liu, Y., Wang, R., Zhang, J., Jiang, X., Dong, X., & Xu, X. (2020) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2020.103758 · Cited by 60 · see citing works
Chen, L., Zhang, X., Wang, Y., et al. (2019) · Polymer Composites · doi:10.1002/pc.25459 · Cited by 59 · see citing works
Chen, L., Zhang, X., & Gan, S. (2019) · Journal of Applied Polymer Science · doi:10.1002/app.48288 · Cited by 58 · see citing works
Effects of dispersed microvoids on thermal expansion behavior of composite materials
Hatta, H., Takei, T., & Taya, M. (2000) · Materials Science and Engineering A · doi:10.1016/s0921-5093(00)00721-8 · Cited by 55 · see citing works
Xu, C., Cheng, K., Liu, Y., Wang, R., Jiang, X., Dong, X., & Xu, X. (2020) · Polymer Engineering and Science · doi:10.1002/pen.25590 · Cited by 52 · see citing works
Dynamic Mechanical Properties of Fused Deposition Modelling Processed Polyphenylsulfone Material
Huang, B., Masood, S. H., Nikzad, M., Venugopal, P. R., & Arivazhagan, A. (2016) · American Journal of Engineering and Applied Sciences · doi:10.3844/ajeassp.2016.1.11 · Cited by 45 · see citing works
Rashed, K., Kafi, A. A., Simons, R., & Bateman, S. A. (2022) · Rapid Prototyping Journal · doi:10.1108/rpj-06-2021-0139 · Cited by 42 · see citing works
Self-citationVoxel-based support structures for additive manufacture of topologically optimal geometries
Leary, M., Mazur, M., Watson, M., et al. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-03964-z · Cited by 40 · see citing works
Lommen, J., Schorn, L., Sproll, C. K., et al. (2022) · Journal of Oral and Maxillofacial Surgery · doi:10.1016/j.joms.2022.03.004 · Cited by 39 · see citing works
Rashed, K., Kafi, A., Simons, R., & Bateman, S. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-10134-1 · Cited by 39 · see citing works
Self-citationOptical sensor-based measurements of thermal expansion coefficient in additive manufacturing
Economidou, S. N., & Karalekas, D. (2016) · Polymer Testing · doi:10.1016/j.polymertesting.2016.03.001 · Cited by 38 · see citing works
Kumar, N., Jain, P. K., Tandon, P., et al. (2018) · Materials Today Proceedings · doi:10.1016/j.matpr.2017.11.672 · Cited by 32 · see citing works
Parametric study on tensile and flexural properties of ULTEM 1010 specimens fabricated via FDM
Pandelidi, C., Maconachie, T., Bateman, S. A., Kelbassa, I., Piegert, S., Leary, M., & Brandt, M. (2021) · Rapid Prototyping Journal · doi:10.1108/rpj-10-2019-0274 · Cited by 31 · see citing works
Self-citationComparitive analysis of mechanical properties of FDM printed parts based on raster angles
Mohan, R. G., Santhosh, K., Iyer, R. V., John, L. K., & Ramu, M. (2021) · Materials Today Proceedings · doi:10.1016/j.matpr.2021.05.649 · Cited by 29 · see citing works
Roughness and compressive strength of FDM 3D printed specimens affected by acetone vapour treatment
Beniak, J., Križan, P., Šooš, Ľ., et al. (2018) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/297/1/012018 · Cited by 28 · see citing works
Lepoivre, A., Lévy, A., Boyard, N., et al. (2021) · Polymer Testing · doi:10.1016/j.polymertesting.2021.107096 · Cited by 27 · see citing works
Sun, Q., Shan, Z., Zhan, L., et al. (2021) · Materials Research Express · doi:10.1088/2053-1591/abeec8 · Cited by 27 · see citing works
Additive manufacturing of fire‐retardant ethylene‐vinyl acetate
Geoffroy, L., Samyn, F., Jimenez, M., et al. (2019) · Polymers for Advanced Technologies · doi:10.1002/pat.4620 · Cited by 26 · see citing works
Avaliações térmica e reológica da matriz termoplástica PEKK utilizada em compósitos aeronáuticos
Mazur, R. L., Botelho, E. C., Costa, M. L., et al. (2008) · Polímeros · doi:10.1590/s0104-14282008000300009 · Cited by 21 · see citing works
Mohamed, O. A., Masood, S. H., & Bhowmik, J. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.10.013 · Cited by 21 · see citing works
Selection of Optimal Factor Level From Process Parameters in Palm Oil Industry
Ginting, E., & Tambunan, M. (2018) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/288/1/012056 · Cited by 19 · see citing works
Effect of slicing parameters on surface roughness of fused deposition modeling prints
Sandhu, G. S., Boparai, K. S., & Sandhu, K. S. (2021) · Materials Today Proceedings · doi:10.1016/j.matpr.2021.09.047 · Cited by 18 · see citing works
Polyetherketoneketone (PEKK), a Versatile Ultra-polymer for Additive Manufacturing
Reber, R., Koo, B. T., & Liu, D. (2019) · doi:10.33599/nasampe/s.19.1596 · Cited by 17 · see citing works
Viscoelastic properties of fused filament fabrication parts
Quintana, J. L. C., Redmann, A. J., Capote, G. A. M., et al. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.06.003 · Cited by 17 · see citing works
He, Y., Sang, Y. F., Zhang, L., et al. (2014) · Plastics Rubber and Composites Macromolecular Engineering · doi:10.1179/1743289814y.0000000074 · Cited by 16 · see citing works
Surface roughness of PLA parts by FDM with chemical treatment
Li, B., Yang, J., Gu, H. C., et al. (2021) · Journal of Physics Conference Series · doi:10.1088/1742-6596/1948/1/012199 · Cited by 15 · see citing works
D20 Committee (2003) · doi:10.1520/d0790-03 · Cited by 14 · see citing works
Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
E37 Committee (2019) · doi:10.1520/e0831-19 · Cited by 13 · see citing works
Effect of Process Parameters on Compressive Properties of ULTEM 9085 Produced by FDM Process
Gebisa, A. W., & Lemu, H. G. (2018) · doi:10.1115/imece2018-87523 · Cited by 6 · see citing works
Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures
D20 Committee (2020) · doi:10.1520/d4065-20 · Cited by 6 · see citing works
Heathman, N., Yap, T., & Tehrani, M. (2020) · American Society for Composites Technical Conference (ASC) · doi:10.12783/asc35/34845 · Cited by 4 · see citing works
Time and Temperature Scans Part I Transitions in Polymers
Menard, K. P. (2008) · CRC Press eBooks · doi:10.1201/9781420053135-12 · Cited by 1 · see citing works
Flagged first, then by citations
Cited by
Sorted by citations
A comprehensive review of lunar-based manufacturing and construction
Azami, M., Kazemi, Z., Moazen, S., Dubé, M., Potvin, M.-J., & Skonieczny, K. (2024) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2024.101045 · Cited by 57 · see citing works
- Authors
- Rashed, K., Kafi, A., Simons, R., & Bateman, S.
- Affiliations
- CSIRO Manufacturing (AU)
- RMIT University (AU)
- Corresponding author
- Rashed, Kaifur
- Venue
- The International Journal of Advanced Manufacturing Technology
- Published
- 2023-03-07
- Volume
- 126
- Issue
- 3-4
- Pages
- 1067-1091
- ISSN
- 0268-3768 (ISSN-L)
- 1433-3015
- OpenAlex
- W4323363646
- Cited by
- 38
- References
- 80
- Citations by year
- 2026: 13 · 2025: 12 · 2024: 6 · 2023: 7
- FWCI
- 2.76
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- The International Journal of Advanced Manufacturing Technology (publishedVersion)
- Figshare (submittedVersion)
- Funders
- Commonwealth Scientific and Industrial Research Organisation
- Australian Research Council
- Topics
- Physical Sciences › Engineering › Automotive Engineering › Additive Manufacturing and 3D Printing Technologies
- Physical Sciences › Engineering › Mechanical Engineering › Additive Manufacturing Materials and Processes
- Physical Sciences › Engineering › Mechanical Engineering › Injection Molding Process and Properties
- Keywords
- fused deposition modeling, process parameter optimization, build orientation, porosity, tensile properties, flexural properties, compressive properties, dynamic mechanical properties, thermal expansion, surface roughness, high-performance thermoplastics, additive manufacturing
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
