Effects of fused filament fabrication process parameters on tensile properties of polyether ketone ketone (PEKK)
Integrity signals
Registry
Cites
Statistics
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
Build orientation had the most significant influence on tensile properties of PEKK samples, followed by the number of contours, resulting in variations in Young's modulus and elongation at break.
“Their research revealed that build orientation had the most significant influence on tensile properties (similar to the results obtained in [175] for PEEK), followed by the number of contours, resulting in variations in Young's modulus and elongation at break.”
From A comprehensive review of lunar-based manufacturing and construction (2024) · cites this paper as [219]
Differences in porosity, rather than crystallinity, were responsible for the variations in mechanical properties among different PEKK sample groups.
“Additionally, the studies found that differences in porosity, rather than crystallinity, were responsible for the variations in mechanical properties among the different sample groups”
From A comprehensive review of lunar-based manufacturing and construction (2024) · cites this paper as [219]
Increased contours in PEKK samples were associated with reduced porosity and improved mechanical and dynamic mechanical properties.
“Specifically, increased contours were associated with reduced porosity and improved mechanical and dynamic mechanical properties [219,220].”
From A comprehensive review of lunar-based manufacturing and construction (2024) · cites this paper as [219]
Cites
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299 · see citing works
Anisotropic material properties of fused deposition modeling ABS
Ahn, S., Montero, M., Odell, D., Roundy, S., & Wright, P. K. (2002) · Rapid Prototyping Journal · doi:10.1108/13552540210441166 · Cited by 2,396 · see citing works
Mohamed, O. A., Masood, S. H., & Bhowmik, J. (2015) · Advances in Manufacturing · doi:10.1007/s40436-014-0097-7 · Cited by 1,497 · see citing works
Parametric appraisal of mechanical property of fused deposition modelling processed parts
Sood, A. K., Ohdar, R., & Mahapatra, S. S. (2009) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2009.06.016 · Cited by 1,332 · see citing works
Effect of processing conditions on the bonding quality of FDM polymer filaments
Sun, Q., Rizvi, G. M., Bellehumeur, C. T., & Gu, P. (2008) · Rapid Prototyping Journal · doi:10.1108/13552540810862028 · Cited by 1,285 · see citing works
Wu, W., Geng, P., Li, G., Zhao, D., Zhang, H., & Zhao, J. X. (2015) · Materials · doi:10.3390/ma8095271 · Cited by 882 · see citing works
Yang, C., Tian, X., Li, D., Cao, Y., Zhao, F., & Shi, C. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.04.027 · Cited by 662 · see citing works
Optimization of rapid prototyping parameters for production of flexible ABS object
Lee, B. H., Abdullah, J. M., & Khan, Z. A. (2005) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2005.02.259 · Cited by 559 · see citing works
Durgun, İ., & Ertan, R. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-10-2012-0091 · Cited by 532 · see citing works
Croccolo, D., Agostinis, M. D., & Olmi, G. (2013) · Computational Materials Science · doi:10.1016/j.commatsci.2013.06.041 · Cited by 368 · see citing works
Ding, S., Zou, B., Wang, P., & Ding, H. (2019) · Polymer Testing · doi:10.1016/j.polymertesting.2019.105948 · Cited by 351 · see citing works
Zhang, Y., & Chou, K. (2008) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1243/09544054jem990 · Cited by 323 · see citing works
Caminero, M. Á., Chacón, J. M., Plaza, E. G., López, P. J. N., Reverte, J. M., & Bécar, J. P. (2019) · Polymers · doi:10.3390/polym11050799 · Cited by 319 · see citing works
Additive layer manufacturing of poly (ether ether ketone) via FDM
Rinaldi, M., Ghidini, T., Cecchini, F., Brandao, A., & Nanni, F. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.03.029 · Cited by 301 · see citing works
Tensile Properties of Crystalline Polymers: Linear Polyethylene
Kennedy, M. A., Peacock, A. J., & Mandelkern, L. (1994) · Macromolecules · doi:10.1021/ma00097a009 · Cited by 293 · see citing works
Zaldivar, R. J., Witkin, D. B., McLouth, T. D., Patel, D., Schmitt, K., & Nokes, J. P. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.11.007 · Cited by 278 · see citing works
Part strength evolution with bonding between filaments in fused deposition modelling
Gurrala, P. K., & Regalla, S. P. (2014) · Virtual and Physical Prototyping · doi:10.1080/17452759.2014.913400 · Cited by 262 · see citing works
Enhancement of Mechanical Properties of FDM‐PLA Parts via Thermal Annealing
Wach, R. A., Wolszczak, P., & Adamus-Włodarczyk, A. (2018) · Macromolecular Materials and Engineering · doi:10.1002/mame.201800169 · Cited by 257 · see citing works
Onwubolu, G. C., & Rayegani, F. (2014) · International Journal of Manufacturing Engineering · doi:10.1155/2014/598531 · Cited by 252 · see citing works
Fused filament fabrication of peek: A review of process-structure-property relationships
Zanjanijam, A. R., Major, I., Lyons, J. G., Lafont, U., & Devine, D. M. (2020) · Polymers · doi:10.3390/polym12081665 · Cited by 240 · see citing works
Effect of infill patterns on the mechanical performance of lightweight 3D-printed cellular PLA parts
Lubombo, C., & Huneault, M. A. (2018) · Materials Today Communications · doi:10.1016/j.mtcomm.2018.09.017 · Cited by 213 · see citing works
Controlling toughness and strength of FDM 3D-printed PLA components through the raster layup
Kiendl, J., & Gao, C. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107562 · Cited by 206 · see citing works
Influence of meso-structure and chemical composition on FDM 3D-printed parts
Alaimo, G., Marconi, S., Costato, L., & Auricchio, F. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.01.019 · Cited by 199 · see citing works
Investigation of infill-patterns on mechanical response of 3D printed poly-lactic-acid
Aloyaydi, B. A., Sivasankaran, S., & Mustafa, A. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106557 · Cited by 194 · see citing works
Liu, X., Zhang, M., Li, S., Si, L., Peng, J., & Yuan, H. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-9263-3 · Cited by 176 · see citing works
Influence of 3D Printing FDM Process Parameters on Tensile Property of ULTEM 9085
Gebisa, A. W., & Lemu, H. G. (2019) · Procedia Manufacturing · doi:10.1016/j.promfg.2019.02.047 · Cited by 173 · see citing works
Raster angle mechanics in fused deposition modelling
Huang, B., & Singamneni, S. (2014) · Journal of Composite Materials · doi:10.1177/0021998313519153 · Cited by 154 · see citing works
Panda, S. K., Padhee, S., Sood, A. K., & Mahapatra, S. S. (2009) · Intelligent Information Management · doi:10.4236/iim.2009.12014 · Cited by 150 · see citing works
Residual stress measurement in Fused Deposition Modelling parts
Casavola, C., Cazzato, A., Moramarco, V., & Pappalettera, G. (2017) · Polymer Testing · doi:10.1016/j.polymertesting.2017.01.003 · Cited by 146 · see citing works
Cortés, L. Q., Caussé, N., Eric Dantras, A., Lonjon, A., & Colette Lacabanne, A. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.43396 · Cited by 126 · see citing works
Influence of fused deposition modeling parameters on the mechanical properties of ABS parts
Vicente, C. M. S., Martins, T. S., Leite, M., Ribeiro, A., & Reis, L. G. (2019) · Polymers for Advanced Technologies · doi:10.1002/pat.4787 · Cited by 125 · see citing works
Tensile Mechanical Behaviour of Multi-Polymer Sandwich Structures via Fused Deposition Modelling
Lopez, D. M. B., & Ahmad, R. (2020) · Polymers · doi:10.3390/polym12030651 · Cited by 116 · see citing works
Lee, C., & Liu, C.-Y. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.11.012 · Cited by 113 · see citing works
Zhang, X., Chen, L., Mulholland, T., & Osswald, T. A. (2019) · Polymers for Advanced Technologies · doi:10.1002/pat.4645 · Cited by 110 · see citing works
Comparison of Ultem 9085 Used in Fused Deposition Modelling (FDM) with Polytherimide Blends
Cicala, G., Ognibene, G., Portuesi, S., Blanco, I., Rapisarda, M., Pergolizzi, E., & Recca, G. (2018) · Materials · doi:10.3390/ma11020285 · Cited by 98 · see citing works
Isothermal crystallization kinetic modeling of poly(etherketoneketone) (PEKK) copolymer
Choupin, T., Bruno Fayolle, C., Régnier, G., Paris, C., Cinquin, J., & Brulé, B. (2017) · Polymer · doi:10.1016/j.polymer.2017.01.033 · Cited by 96 · see citing works
Parameters Influencing the Outcome of Additive Manufacturing of Tiny Medical Devices Based on PEEK
Wang, Y., Müller, W., Rumjahn, A., & Schwitalla, A. D. (2020) · Materials · doi:10.3390/ma13020466 · Cited by 92 · see citing works
Li, Y., & Lou, Y. (2020) · Polymers · doi:10.3390/polym12112497 · Cited by 86 · see citing works
Impact of fused deposition process parameter (infill pattern) on the strength of PETG part
Srinivasan, R., Kumar, K. N., Ibrahim, A., Anandu, K. V., & Gurudhevan, R. (2020) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.03.777 · Cited by 70 · see citing works
Optimization of FDM process parameters for dual extruder 3d printer using Artificial Neural network
Giri, J. P., Shahane, P., Jachak, S. R., Chadge, R., & Giri, P. J. (2021) · Materials Today Proceedings · doi:10.1016/j.matpr.2021.01.899 · Cited by 69 · see citing works
A study of creep in polycarbonate fused deposition modelling parts
Salazar-Martín, A. G., Pérez, M. A., García‐Granada, A., Reyes, G., & Puigoriol-Forcada, J. M. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.01.008 · Cited by 68 · see citing works
Strength to cost ratio analysis of FDM Nylon 12 3D Printed Parts
Mostafa, K. G., Montemagno, C. D., & Qureshi, A. J. (2018) · Procedia Manufacturing · doi:10.1016/j.promfg.2018.07.086 · Cited by 66 · see citing works
Choupin, T., Bruno Fayolle, C., Régnier, G., Paris, C., Cinquin, J., & Brulé, B. (2018) · Polymer · doi:10.1016/j.polymer.2018.08.060 · Cited by 63 · see citing works
Topological optimization of 3D printed bone analog with PEKK for surgical mandibular reconstruction
Cheng, K., Liu, Y., Wang, R., Zhang, J., Jiang, X., Dong, X., & Xu, X. (2020) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2020.103758 · Cited by 60 · see citing works
On the thermal processing and mechanical properties of 3D-printed polyether ether ketone
Wang, R., Cheng, K., Advíncula, R. C., & Chen, Q. (2019) · MRS Communications · doi:10.1557/mrc.2019.86 · Cited by 57 · see citing works
Vaes, D., Coppens, M., Goderis, B., Zoetelief, W., & Puyvelde, P. V. (2021) · Polymers · doi:10.3390/polym13162677 · Cited by 49 · see citing works
Effect of protective coatings on the water absorption and mechanical properties of 3D printed PLA
Vicente, C. M. S., Fernandes, J. C. S., de Deus, A. M., Vaz, M. F., Leite, M., & Reis, L. G. (2019) · Frattura ed Integrità Strutturale · doi:10.3221/igf-esis.48.68 · Cited by 42 · see citing works
Rashed, K., Kafi, A. A., Simons, R., & Bateman, S. A. (2022) · Rapid Prototyping Journal · doi:10.1108/rpj-06-2021-0139 · Cited by 42 · see citing works
Self-citationThermo-rheological effects on successful 3D printing of biodegradable polyesters
Candal, M. V., Calafel, I., Aranburu, N., Fernández, M., Guerrica‐Echevarría, G., Santamaría, A., & Müller, A. J. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101408 · Cited by 39 · see citing works
Bessaguet, C., Eric Dantras, A., Michon, G., Chevalier, M., Laffont, L., & Colette Lacabanne, A. (2019) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2019.02.017 · Cited by 37 · see citing works
Fracture toughness of additively manufactured ULTEM 1010
Taylor, G., Anandan, S., Murphy, D., Leu, M. C., & T, C. K. (2018) · Virtual and Physical Prototyping · doi:10.1080/17452759.2018.1558494 · Cited by 33 · see citing works
Flexural behavior of additively manufactured Ultem 1010: experiment and simulation
Taylor, G., Wang, X., Mason, L., Leu, M. C., T, C. K., Schniepp, T. J., & Jones, R. (2018) · Rapid Prototyping Journal · doi:10.1108/rpj-02-2018-0037 · Cited by 32 · see citing works
Parametric study on tensile and flexural properties of ULTEM 1010 specimens fabricated via FDM
Pandelidi, C., Maconachie, T., Bateman, S. A., Kelbassa, I., Piegert, S., Leary, M., & Brandt, M. (2021) · Rapid Prototyping Journal · doi:10.1108/rpj-10-2019-0274 · Cited by 31 · see citing works
Self-citationCharlon, S., & Soulestin, J. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.49038 · Cited by 30 · see citing works
Temperature and Time Dependence of the Solvent-Induced Crystallization of Poly(l-lactide)
Udayakumar, M., Kollár, M., Kristály, F., Leskó, M. Z., Szabó, T. J., Marossy, K., Tasnádi, I., & Németh, Z. (2020) · Polymers · doi:10.3390/polym12051065 · Cited by 29 · see citing works
Comparitive analysis of mechanical properties of FDM printed parts based on raster angles
Mohan, R. G., Santhosh, K., Iyer, R. V., John, L. K., & Ramu, M. (2021) · Materials Today Proceedings · doi:10.1016/j.matpr.2021.05.649 · Cited by 29 · see citing works
Enhancing Impact Strength of Fused Deposition Modeling Built Parts using Polycarbonate Material
Santhakumar, J., Maggirwar, R., Gollapudi, S., Karthekeyan, S., & Kalra, N. (2016) · Indian Journal of Science and Technology · doi:10.17485/ijst/2016/v9i34/100983 · Cited by 20 · see citing works
Polyetherketoneketone (PEKK), a Versatile Ultra-polymer for Additive Manufacturing
Reber, R., Koo, B. T., & Liu, D. (2019) · doi:10.33599/nasampe/s.19.1596 · Cited by 17 · see citing works
3D-printed polyether ether ketone samples mechanical properties estimation
Sviridov, A. S., Лопатина, Ю. А., & Курганова, Ю. А. (2019) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/589/1/012021 · Cited by 15 · see citing works
Gunasekaran, H. B., Ponnan, S., Thirunavukkarasu, N., Wu, K., Wu, L., & Wang, J. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.09.046 · Cited by 12 · see citing works
Mohamed, O. A., Masood, S. H., & Bhowmik, J. (2016) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/149/1/012122 · Cited by 11 · see citing works
Flagged first, then by citations
Cited by
Sorted by citations
Sapkota, A., Ghimire, S. K., & Adanur, S. (2024) · Journal of Industrial Textiles · doi:10.1177/15280837241282110 · Cited by 72 · see citing works
Simunec, D. P., Jacob, J., Kandjani, A. E., Trinchi, A., & Sola, A. (2023) · European Polymer Journal · doi:10.1016/j.eurpolymj.2023.112553 · Cited by 70 · see citing works
A comprehensive review of lunar-based manufacturing and construction
Azami, M., Kazemi, Z., Moazen, S., Dubé, M., Potvin, M.-J., & Skonieczny, K. (2024) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2024.101045 · Cited by 57 · see citing works
Magri, A. E., Vaudreuil, S., ayad, A. B., Hakimi, A. E., Otmani, R. E., & Amegouz, D. (2023) · Journal of Applied Polymer Science · doi:10.1002/app.54078 · Cited by 44 · see citing works
Tientcheu, S. W. T., Djouda, J. M., Bouaziz, M., & Longatte, É. (2023) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-023-12823-x · Cited by 43 · see citing works
Rashed, K., Kafi, A., Simons, R., & Bateman, S. (2023) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-023-11167-w · Cited by 38 · see citing works
Self-citationVidakis, N., Petousis, M., Spyridaki, M., Mountakis, N., Dimitriou, E., & Michailidis, N. (2025) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2025.101086 · Cited by 38 · see citing works
Alzyod, H., & Ficzere, P. (2024) · Scientific Reports · doi:10.1038/s41598-024-52827-5 · Cited by 36 · see citing works
de Seijas, M. O. V., Piskacev, M., Celotti, L., Nadalini, R., Daurskikh, A., Baptista, A., Berg, M., Caltavituro, F., Major, I., Devine, D. M., et al. (2024) · Acta Astronautica · doi:10.1016/j.actaastro.2024.03.015 · Cited by 33 · see citing works
Mandal, S., Bhowmik, S., & Ramu, M. (2024) · Polymer Composites · doi:10.1002/pc.28244 · Cited by 22 · see citing works
Maloney, A., Manaf, E., Gately, N., Major, I., & Devine, D. M. (2025) · Materials & Design · doi:10.1016/j.matdes.2025.113938 · Cited by 18 · see citing works
Effects of 3D printing parameters on the flexural properties of semi-crystalline PEKK
Maloney, A., Major, I., Gately, N., & Devine, D. M. (2024) · Materials Today Communications · doi:10.1016/j.mtcomm.2024.111152 · Cited by 16 · see citing works
Ananthalakshmi, S., Balachandran, M., & Bhowmik, S. (2025) · Polymer Engineering and Science · doi:10.1002/pen.70016 · Cited by 13 · see citing works
Clegg, B. A., Shrestha, D. R., & Emami, N. (2023) · Biotribology · doi:10.1016/j.biotri.2023.100263 · Cited by 13 · see citing works
Exploring Process‐Structure–Property Relationships of PEKK and PEEK in Fused Filament Fabrication
Maloney, A., Major, I., Gately, N., & Devine, D. M. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.57347 · Cited by 13 · see citing works
Spicer, R., Miranda, F., Cote, T., Itchkawich, T., & Black, J. T. (2023) · Journal of Spacecraft and Rockets · doi:10.2514/1.a35709 · Cited by 12 · see citing works
Karthik, N., Bekinal, S. I., Powar, S., & Doddamani, M. R. (2025) · Polymer Composites · doi:10.1002/pc.70307 · Cited by 10 · see citing works
Multiscale Mechanical Characterization of Polyether-2-ketone (PEKK) for Biomedical Application
Serino, G., Distefano, F., Zanetti, E. M., Pascoletti, G., & Epasto, G. (2024) · Bioengineering · doi:10.3390/bioengineering11030244 · Cited by 9 · see citing works
Characterization of the Polyetheretherketone Weldment Fabricated via Rotary Friction Welding
Kuo, C.-C., Liang, H.-X., & Huang, S.-H. (2023) · Polymers · doi:10.3390/polym15234552 · Cited by 8 · see citing works
Tetteh, A. E., Smith, J. A. M., Spece, H., Porter, D. A., Prima, M. A. D., & Kurtz, S. M. (2025) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2025.107203 · Cited by 6 · see citing works
Malekpour, F., & Hojjati, M. (2025) · Progress in Additive Manufacturing · doi:10.1007/s40964-025-01305-z · Cited by 6 · see citing works
Rodzeń, K., O’Donnell, E., Hasson, F., & Boyd, A. (2025) · Materials Today Communications · doi:10.1016/j.mtcomm.2025.114253 · Cited by 4 · see citing works
On the resistance of PEKK to degradation during multiple recycling cycles for additive manufacturing
Malekpour, F., & Hojjati, M. (2026) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2026.111951 · Cited by 3 · see citing works
Alamin, A. B., Wu, Y., Zhu, J. H., Wang, K., & Zheng, H. (2024) · Materials Today Communications · doi:10.1016/j.mtcomm.2024.111272 · Cited by 3 · see citing works
Tetteh, A. E., Smith, J. A., Porter, D. A., Prima, M. A. D., & Kurtz, S. M. (2026) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.70053 · Cited by 2 · see citing works
Magri, A. E., Bouchkara, Z., Vaudreuil, S., & Vanaei, H. R. (2026) · Progress in Additive Manufacturing · doi:10.1007/s40964-026-01718-4 · Cited by 2 · see citing works
Johann, K. S., Schmitt, L., & Bonten, C. (2025) · Macromolecular Materials and Engineering · doi:10.1002/mame.202400441 · Cited by 1 · see citing works
Impact of different annealing methods on MEX-printed polyetherketoneketone parts
Butt, J., & Mohaghegh, V. (2025) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-025-15482-2 · Cited by 1 · see citing works
Sharma, A., Smith, J. A. M., Kurtz, M. A., Derr, T., DeSantis, P. M., Bock, R. M., & Kurtz, S. M. (2025) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2025.107141 · Cited by 1 · see citing works
Derr, T., Başgül, C., DeSantis, P. M., Bock, R. M., & Kurtz, S. M. (2025) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbmb.70009 · Cited by 1 · see citing works
Lv, B., Zheng, Z., Li, G., Huang, J., Li, T., Wang, Y., Wang, S., Zhang, X., & Dong, W. (2026) · ACS Macro Letters · doi:10.1021/acsmacrolett.6c00088 · Cited by 1 · see citing works
Malekpour, F., & Hojjati, M. (2026) · Composites Part B Engineering · doi:10.1016/j.compositesb.2026.114013 · Cited by 1 · see citing works
Suresh, K. A., Joshi, J., Mandal, S., & Bhowmik, S. (2025) · Journal of Reinforced Plastics and Composites · doi:10.1177/07316844251358026
Malekpour, F., & Hojjati, M. (2025) · Journal of Science Advanced Materials and Devices · doi:10.1016/j.jsamd.2025.101077
Malekpour, F., & Hojjati, M. (2026) · Springer eBooks · doi:10.1007/978-3-032-05224-7_14
Experimental Investigation of the tensile and fatigue behaviour of 3D-Printed recycled PLA parts
Igwe, A. C., Mahamood, R. M., Igwe, N. C., Birkett, M., Mwema, F. M., & Akinlabi, E. T. (2026) · Advances in Materials and Processing Technologies · doi:10.1080/2374068x.2026.2665300
Rashed, K., Olaiya, N. G., Kafi, A. A., Simons, R., Peracchi, S., Ameli, A., & Bateman, S. A. (2026) · Progress in Additive Manufacturing · doi:10.1007/s40964-026-01984-2
Self-citationBouchkara, Z., Magri, A. E., Hammouti, B., & Hakimi, A. E. (2026) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-026-19384-9
Wang, Z., Zhang, X., & Zhang, Z. (2026) · Rapid Prototyping Journal · doi:10.1108/rpj-04-2026-0257
- Authors
- Rashed, K., Kafi, A., Simons, R., & Bateman, S.
- Affiliations
- RMIT University (AU)
- Corresponding author
- Rashed, Kaifur
- Venue
- The International Journal of Advanced Manufacturing Technology
- Published
- 2022-09-15
- Volume
- 122
- Issue
- 9-10
- Pages
- 3607-3621
- ISSN
- 0268-3768 (ISSN-L)
- 1433-3015
- OpenAlex
- W4295792108
- Cited by
- 39
- References
- 61
- Citations by year
- 2026: 9 · 2025: 14 · 2024: 8 · 2023: 8
- FWCI
- 2.04
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- The International Journal of Advanced Manufacturing Technology (publishedVersion)
- Figshare (submittedVersion)
- Funders
- Australian Government Research Training Program Scholarship
- Commonwealth Scientific and Industrial Research Organisation
- Topics
- Physical Sciences › Engineering › Automotive Engineering › Additive Manufacturing and 3D Printing Technologies
- Physical Sciences › Engineering › Mechanical Engineering › Additive Manufacturing Materials and Processes
- Physical Sciences › Engineering › Mechanical Engineering › Injection Molding Process and Properties
- Keywords
- fused deposition modeling, process parameters, tensile properties, build orientation, infill pattern, raster angle, Young's modulus, elongation at break, fractography, failure modes, crystallinity, porosity
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
