Effects of nozzle temperature and building orientation on mechanical properties and microstructure of PEEK and PEI printed by 3D-FDM

Anisotropic material properties of fused deposition modeling ABS

Ahn, S., Montero, M., Odell, D., Roundy, S., & Wright, P. K. (2002) · Rapid Prototyping Journal · doi:10.1108/13552540210441166 · Cited by 2,396 · see citing works

A review of melt extrusion additive manufacturing processes: I. Process design and modeling

Turner, B. N., Strong, R. J., & Gold, S. A. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-01-2013-0012 · Cited by 1,465 · see citing works

A comparison of rapid prototyping technologies

Pham, D. T., & Gault, R. (1998) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(97)00137-5 · Cited by 919 · see citing works

Influence of Layer Thickness and Raster Angle on the Mechanical Properties of 3D-Printed PEEK and a Comparative Mechanical Study between PEEK and ABS

Wu, W., Geng, P., Li, G., Zhao, D., Zhang, H., & Zhao, J. X. (2015) · Materials · doi:10.3390/ma8095271 · Cited by 882 · see citing works

Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK material

Yang, C., Tian, X., Li, D., Cao, Y., Zhao, F., & Shi, C. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.04.027 · Cited by 662 · see citing works

Effects of printing parameters of fused deposition modeling on mechanical properties, surface quality, and microstructure of PEEK

Wang, P., Zou, B., Xiao, H., Ding, S., & Huang, C. (2019) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2019.03.016 · Cited by 462 · see citing works

Study on microstructure, mechanical properties and machinability of efficiently additive manufactured AISI 316L stainless steel by high-power direct laser deposition

Guo, P., Zou, B., Huang, C., & Gao, H. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2016.09.005 · Cited by 413 · see citing works

Influence of processing and orientation print effects on the mechanical and thermal behavior of 3D-Printed ULTEM® 9085 Material

Zaldivar, R. J., Witkin, D. B., McLouth, T. D., Patel, D., Schmitt, K., & Nokes, J. P. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.11.007 · Cited by 278 · see citing works

Mechanical impact behavior of polyether–ether–ketone (PEEK)

Garcia‐Gonzalez, D., Rusinek, A., Jankowiak, T., & Árias, A. (2015) · Composite Structures · doi:10.1016/j.compstruct.2014.12.061 · Cited by 245 · see citing works

Investigating Effects of Fused-Deposition Modeling (FDM) Processing Parameters on Flexural Properties of ULTEM 9085 using Designed Experiment

Gebisa, A. W., & Lemu, H. G. (2018) · Materials · doi:10.3390/ma11040500 · Cited by 188 · see citing works

Solid freeform fabrication of metal components using fused deposition of metals

Wu, G., Langrana, N. A., Sadanji, R., & Danforth, S. C. (2002) · Materials & Design (1980-2015) · doi:10.1016/s0261-3069(01)00079-6 · Cited by 144 · see citing works

Some fundamental aspects of composites fractography

Purslow, D. (1981) · Composites · doi:10.1016/0010-4361(81)90012-4 · Cited by 139 · see citing works

Molecular analysis of the melting behaviour of poly(aryl-ether-ether-ketone)

Nguyen, H. X., & Ishida, H. (1986) · Polymer · doi:10.1016/0032-3861(86)90041-8 · Cited by 125 · see citing works

OPTIMIZATION OF PROCESS PARAMETERS IN FUSED DEPOSITION MODELING USING WEIGHTED PRINCIPAL COMPONENT ANALYSIS

Sood, A. K., Chaturvedi, V., Datta, S., & Mahapatra, S. S. (2011) · Journal of Advanced Manufacturing Systems · doi:10.1142/s0219686711002181 · Cited by 95 · see citing works

Experimental Analysis of High Temperature PEEK Materials on 3D Printing Test

Sun, X., Liangcheng, C., Ma, H., Peng, G., Bai, Z., & Li, C. (2017) · International Conference on Measuring Technology and Mechatronics Automation (ICMTMA) · doi:10.1109/icmtma.2017.0012 · Cited by 92 · see citing works

Processing poly(ether etherketone) an a 3D printer for thermoplastic modelling

Valentan, B., Kadivnik, Ž., Brajlih, T., Anderson, A., & Drstvenšek, I. (2013) · University of Maribor digital library (University of Maribor) · Cited by 60 · see citing works

The thermal stability of polyetherimide

Huang, F., Wang, X., & Li, S. (1987) · Polymer Degradation and Stability · doi:10.1016/0141-3910(87)90005-x · Cited by 48 · see citing works

Crystallisation in miscible blends of PEEK and PEI

Jenkins, M. J. (2001) · Polymer · doi:10.1016/s0032-3861(00)00438-9 · Cited by 45 · see citing works

Polyetherimide as biomaterial: preliminary in vitro and in vivo biocompatibility testing

Peluso, G., Petillo, O., Ambrosio, L., & Nicolais, L. (1994) · Journal of Materials Science Materials in Medicine · doi:10.1007/bf00120367 · Cited by 40 · see citing works

Prediction and analysis of sliding wear performance of fused deposition modelling-processed ABS plastic parts

Equbal, A., Sood, A. K., Toppo, V., Ohdar, R., & Mahapatra, S. S. (2010) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1243/13506501jet835 · Cited by 36 · see citing works

2018 10th International Conference on Measuring Technology and Mechatronics Automation (ICMTMA)

(2018) · doi:10.1109/icmtma44283.2018 · Cited by 35 · see citing works

Rubber (SEBS-g-MA) Toughened Flame-Retardant Polyamide 6: Microstructure, Combustion, Extension, and Izod Impact Behavior

Wu, H., Krifa, M., & Koo, J. H. (2017) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2017.1344856 · Cited by 22 · see citing works

Research on precise control of 3D print nozzle temperature in PEEK material

Liu, Z., Wang, G., Huo, Y., & Zhao, W. G. (2017) · AIP conference proceedings · doi:10.1063/1.5005278 · Cited by 16 · see citing works

Fibre pull-out phenomena in reinforced polyamides

Bailey, R. S., & Bader, M. G. (1985) · Journal of Materials Science Letters · doi:10.1007/bf00720518 · Cited by 9 · see citing works

FDM-Based 3D Printing of Polymer and Associated Composite: A Review on Mechanical Properties, Defects and Treatments

Wickramasinghe, S., Do, T., & Tran, P. (2020) · Polymers · doi:10.3390/polym12071529 · Cited by 1,095 · see citing works

Recent Progress on Polymer Materials for Additive Manufacturing

Tan, L. J., Zhu, W., & Zhou, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003062 · Cited by 745 · see citing works

3D/4D Printing of Polymers: Fused Deposition Modelling (FDM), Selective Laser Sintering (SLS), and Stereolithography (SLA)

Kafle, A., Luis, E., Silwal, R., Pan, H. M., Shrestha, P. L., & Bastola, A. K. (2021) · Polymers · doi:10.3390/polym13183101 · Cited by 587 · see citing works

Fused deposition modelling: Current status, methodology, applications and future prospects

Cano-Vicent, A., Tambuwala, M. M., Hassan, S. S., Barh, D., Aljabali, A. A. A., Birkett, M., Arjunan, A., & Serrano‐Aroca, Á. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.102378 · Cited by 512 · see citing works

Fused deposition modeling: process, materials, parameters, properties, and applications

Kumaresan, R., Samykano, M., Kadirgama, K., Harun, W. S. W., & Rahman, M. M. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-08860-7 · Cited by 431 · see citing works

Effects of FDM-3D printing parameters on mechanical properties and microstructure of CF/PEEK and GF/PEEK

Wang, P., Zou, B., Ding, S., Li, L., & Huang, C. (2020) · Chinese Journal of Aeronautics · doi:10.1016/j.cja.2020.05.040 · Cited by 376 · see citing works

Polymer 3D Printing Review: Materials, Process, and Design Strategies for Medical Applications

Arefin, A. M. E., Khatri, N. R., Kulkarni, N. N., & Egan, P. (2021) · Polymers · doi:10.3390/polym13091499 · Cited by 372 · see citing works

Preparation of short CF/GF reinforced PEEK composite filaments and their comprehensive properties evaluation for FDM-3D printing

Wang, P., Zou, B., Ding, S., Huang, C., Shi, Z., Ma, Y., & Yao, P. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.108175 · Cited by 360 · see citing works

Importance of Polymer Rheology on Material Extrusion Additive Manufacturing: Correlating Process Physics to Print Properties

Das, A., Gilmer, E. L., Biria, S., & Bortner, M. J. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.0c01228 · Cited by 312 · see citing works

The mechanical testing and performance analysis of polymer-fibre composites prepared through the additive manufacturing

Shanmugam, V., Rajendran, D. J. J., Babu, K., Rajendran, S., Arumugaprabu, V., Uthayakumar, M., Singh, S., Das, O., Neisiany, R. E., Hedenqvist, M. S., et al. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106925 · Cited by 271 · see citing works

Printing parameters and materials affecting mechanical properties of FDM-3D printed Parts: Perspective and prospects

Doshi, M., Mahale, A., Singh, S. K., & Deshmukh, S. (2021) · Materials Today Proceedings · doi:10.1016/j.matpr.2021.10.003 · Cited by 262 · see citing works

Fused filament fabrication of peek: A review of process-structure-property relationships

Zanjanijam, A. R., Major, I., Lyons, J. G., Lafont, U., & Devine, D. M. (2020) · Polymers · doi:10.3390/polym12081665 · Cited by 240 · see citing works

Current understanding and challenges in high temperature additive manufacturing of engineering thermoplastic polymers

Das, A., Chatham, C. A., Fallon, J. J., Zawaski, C. E., Gilmer, E. L., Williams, C. B., & Bortner, M. J. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101218 · Cited by 242 · see citing works

The preparation of ZrO2-Al2O3 composite ceramic by SLA-3D printing and sintering processing

Liu, X., Zou, B., Xing, H., & Huang, C. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.09.054 · Cited by 201 · see citing works

Optimization of Printing Parameters to Maximize the Mechanical Properties of 3D-Printed PETG-Based Parts

Valvez, S., Silva, A. P., & Reis, P. N. B. (2022) · Polymers · doi:10.3390/polym14132564 · Cited by 220 · see citing works

Effect of 3D printing process parameters on surface and mechanical properties of FFF-printed PEEK

Pulipaka, A., Gide, K. M., Beheshti, A., & Bagheri, Z. S. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.11.057 · Cited by 184 · see citing works

3D Printing of Strong and Tough Double Network Granular Hydrogels

Hirsch, M., Charlet, A., & Amstad, E. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202005929 · Cited by 169 · see citing works

The thermal properties of FDM printed polymeric materials: A review

Shanmugam, V., Babu, K., Kannan, G., Mensah, R. A., Samantaray, S. K., & Das, O. (2024) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2024.110902 · Cited by 180 · see citing works

Conductive 3D printed PLA composites: On the interplay of mechanical, electrical and thermal behaviours

Tirado-Garcia, I., Garcia‐Gonzalez, D., Garzon-Hernandez, S., Rusinek, A., Robles, G., Martínez-Tarifa, J. M., & Árias, A. (2021) · Composite Structures · doi:10.1016/j.compstruct.2021.113744 · Cited by 163 · see citing works

Effects of crystallinity control on mechanical properties of 3D-printed short-carbon-fiber-reinforced polyether ether ketone composites

Yang, D., Cao, Y., Zhang, Z., Yin, Y., & Li, D. (2021) · Polymer Testing · doi:10.1016/j.polymertesting.2021.107149 · Cited by 155 · see citing works

Morphology and Mechanical Properties of 3D Printed Wood Fiber/Polylactic Acid Composite Parts Using Fused Deposition Modeling (FDM): The Effects of Printing Speed

Yang, T.-C., & Yeh, C.-H. (2020) · Polymers · doi:10.3390/polym12061334 · Cited by 149 · see citing works

PEEK for Oral Applications: Recent Advances in Mechanical and Adhesive Properties

Luo, C., Liu, Y., Peng, B., Chen, M., Liu, Z., Li, Z., Kuang, H., Gong, B., Li, Z., & Sun, H. (2023) · Polymers · doi:10.3390/polym15020386 · Cited by 145 · see citing works

A comprehensive review on effect of printing parameters on mechanical properties of FDM printed parts

Khan, S., Joshi, K., & Deshmukh, S. (2021) · Materials Today Proceedings · doi:10.1016/j.matpr.2021.09.433 · Cited by 132 · see citing works

3D printing of PEEK–cHAp scaffold for medical bone implant

Oladapo, B. I., Zahedi, S. A., Ismail, S. O., Omigbodun, F. T., Bowoto, O. K., Olawumi, M. A., & Muhammad, M. A. (2020) · Bio-Design and Manufacturing · doi:10.1007/s42242-020-00098-0 · Cited by 109 · see citing works

An overview on the influence of process parameters through the characteristic of 3D-printed PEEK and PEI parts

Magri, A. E., Vanaei, S., & Vaudreuil, S. (2021) · High Performance Polymers · doi:10.1177/09540083211009961 · Cited by 106 · see citing works

A comprehensive review on 3D printing advancements in polymer composites: technologies, materials, and applications

Jagadeesh, P., Puttegowda, M., Rangappa, S. M., Alexey, K., Gorbatyuk, S. M., Khan, A., Doddamani, M. R., & Siengchin, S. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-09406-7 · Cited by 105 · see citing works

Recent developments in improving the fracture toughness of 3D-printed fiber-reinforced polymer composites

Khan, T., Ali, M., Riaz, Z., Butt, H., Al‐Rub, R. K. A., Dong, Y., & Umer, R. (2024) · Composites Part B Engineering · doi:10.1016/j.compositesb.2024.111622 · Cited by 102 · see citing works

A continuum constitutive model for FDM 3D printed thermoplastics

Garzon-Hernandez, S., Árias, A., & Garcia‐Gonzalez, D. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.108373 · Cited by 100 · see citing works

Recent Advances on High‐Performance Polyaryletherketone Materials for Additive Manufacturing

Chen, P., Wang, H., Su, J. D., Tian, Y., Wen, S., Su, B., Cao, Y., Chen, B., Zhou, K., Yan, C., et al. (2022) · Advanced Materials · doi:10.1002/adma.202200750 · Cited by 98 · see citing works

Additive manufacturing of polyetheretherketone and its composites: A review

Francis, J. N., Banerjee, I., Chugh, A., & Singh, J. (2022) · Polymer Composites · doi:10.1002/pc.26961 · Cited by 99 · see citing works

Effect of infill density, build direction and heat treatment on the tensile mechanical properties of 3D-printed carbon-fiber nylon composites

Ali, Z., Yan, Y., Mei, H., Cheng, L., & Zhang, L. (2022) · Composite Structures · doi:10.1016/j.compstruct.2022.116370 · Cited by 93 · see citing works

Influence of Fused Deposition Modelling Nozzle Temperature on the Rheology and Mechanical Properties of 3D Printed β-Tricalcium Phosphate (TCP)/Polylactic Acid (PLA) Composite

Elhattab, K., Bhaduri, S. B., & Sikder, P. (2022) · Polymers · doi:10.3390/polym14061222 · Cited by 93 · see citing works

Mechanical properties of thermoplastic parts produced by fused deposition modeling:a review

Bakır, A. A., Atik, R., & Özerinç, S. (2021) · Rapid Prototyping Journal · doi:10.1108/rpj-03-2020-0061 · Cited by 88 · see citing works

Effect of extrusion and fused filament fabrication processing parameters of recycled poly(ethylene terephthalate) on the crystallinity and mechanical properties

de Voorde, B. V., Katalagarianakis, A., Huysman, S., Toncheva, A., Raquez, J., Ðuretek, I., Holzer, C., Cardon, L., Bernaerts, K. V., Hemelrijck, D. V., et al. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.102518 · Cited by 88 · see citing works

A review on the potential of polylactic acid based thermoplastic elastomer as filament material for fused deposition modelling

Musa, L., Nitiyah, K. K., Rahim, S. Z. A., Rasidi, M. S. M., Rennie, A., Rahman, R., Kanani, A. Y., & Azmi, A. A. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.08.057 · Cited by 84 · see citing works

Improvement of Heat Treatment Process on Mechanical Properties of FDM 3D-Printed Short- and Continuous-Fiber-Reinforced PEEK Composites

Wang, P., & Zou, B. (2022) · Coatings · doi:10.3390/coatings12060827 · Cited by 82 · see citing works

Thermal‐Stable Separators: Design Principles and Strategies Towards Safe Lithium‐Ion Battery Operations

Lin, W., Wang, F. Y., Wang, H., Li, H., Fan, Y. P., Chan, D., Chen, S., Tang, Y., & Zhang, Y. (2022) · ChemSusChem · doi:10.1002/cssc.202201464 · Cited by 78 · see citing works

3D printing processes in precise drug delivery for personalized medicine

Peng, H., Han, B., Tong, T., Jin, X., Peng, Y., Guo, M., Li, B., Ding, J., Kong, Q., & Wang, Q. (2024) · Biofabrication · doi:10.1088/1758-5090/ad3a14 · Cited by 78 · see citing works

Hybrid layout and additive manufacturing of continuous carbon/glass fibers reinforced composites, and its effect on mechanical properties

Ding, S., Zou, B., Zhuang, Y., Wang, X., Li, L., & Liu, J. (2023) · Composite Structures · doi:10.1016/j.compstruct.2023.117133 · Cited by 77 · see citing works

Material-Dependent Effect of Common Printing Parameters on Residual Stress and Warpage Deformation in 3D Printing: A Comprehensive Finite Element Analysis Study

Alzyod, H., & Ficzere, P. (2023) · Polymers · doi:10.3390/polym15132893 · Cited by 77 · see citing works

High-temperature 3D printing of polyetheretherketone products: Perspective on industrial manufacturing applications of super engineering plastics

Park, S. J., Lee, J. E., Park, J., Lee, N.-K., Son, Y., & Park, S.-H. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.110163 · Cited by 75 · see citing works

Effects of Nozzle Temperature on Mechanical Properties of Polylactic Acid Specimens Fabricated by Fused Deposition Modeling

Rivera‐López, F., Pavón, M. M. L., Correa, E. C., & Molina, M. H. (2024) · Polymers · doi:10.3390/polym16131867 · Cited by 75 · see citing works

3D printing of polyphenylene sulfide for functional lightweight automotive component manufacturing through enhancing interlayer bonding

Garmabi, M. M., Shahi, P., Tjong, J., & Sain, M. M. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.102780 · Cited by 73 · see citing works

A review on spacers and membranes: Conventional or hybrid additive manufacturing?

Koo, J. W., Ho, J. S., An, J., Zhang, Y., Chua, C. K., & Chong, T. H. (2020) · Water Research · doi:10.1016/j.watres.2020.116497 · Cited by 74 · see citing works

Nanomaterials Reinforced Polymer Filament for Fused Deposition Modeling: A State-of-the-Art Review

Luo, X., Cheng, H., & Wu, X. (2023) · Polymers · doi:10.3390/polym15142980 · Cited by 70 · see citing works

Mechanical Properties of 3D-Printed Components Using Fused Deposition Modeling: Optimization Using the Desirability Approach and Machine Learning Regressor

Jatti, V. S., Sapre, M. S., Jatti, A. V., Khedkar, N. K., & Jatti, V. S. (2022) · Applied System Innovation · doi:10.3390/asi5060112 · Cited by 69 · see citing works

Design and characterization of carbon fiber-reinforced PEEK/PEI blends for Fused Filament Fabrication additive manufacturing

Diouf‐Lewis, A., Farahani, R. D., Iervolino, F., Pierre, J., Abderrafai, Y., Lévesque, M., Piccirelli, N., & Therriault, D. (2022) · Materials Today Communications · doi:10.1016/j.mtcomm.2022.103445 · Cited by 68 · see citing works

Effect of 3D Printing Process Parameters and Heat Treatment Conditions on the Mechanical Properties and Microstructure of PEEK Parts

Zhen, H., Zhao, B., Quan, L., & Fu, J. (2023) · Polymers · doi:10.3390/polym15092209 · Cited by 68 · see citing works

Effect of temperature history during additive manufacturing on crystalline morphology of PEEK

Lee, A., Wynn, M., Quigley, L., Salviato, M., & Zobeiry, N. (2022) · Advances in Industrial and Manufacturing Engineering · doi:10.1016/j.aime.2022.100085 · Cited by 67 · see citing works

Experimental investigation of mechanical properties of PLA, ABS, and PETG 3-d printing materials using fused deposition modeling technique

Kopar, M., & Yıldız, A. R. (2023) · Materials Testing · doi:10.1515/mt-2023-0202 · Cited by 64 · see citing works

High-temperature fracture behavior of carbon fiber reinforced PEEK composites fabricated via fused filament fabrication

Yavaş, D. (2023) · Composites Part B Engineering · doi:10.1016/j.compositesb.2023.110987 · Cited by 62 · see citing works

A review on fused deposition modeling (FDM)-based additive manufacturing (AM) methods, materials and applications for flexible fabric structures

Sapkota, A., Ghimire, S. K., & Adanur, S. (2024) · Journal of Industrial Textiles · doi:10.1177/15280837241282110 · Cited by 72 · see citing works

Evaluation of the surface roughness and dimensional accuracy of low-cost 3D-printed parts made of PLA–aluminum

Sukindar, N. A., Yasir, A. S. H. M., Azhar, M. D., Azhar, M. A. M., Halim, N. F. H. A., Sulaiman, M. H., Sabli, A. S. H. A., & Ariffin, M. K. A. M. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e25508 · Cited by 60 · see citing works

Tribological behaviour of acrylonitrile-butadiene rubber under thermal oxidation ageing

Li, B., Li, S.-X., Shen, M., Xiao, Y., Zhang, J., Xiong, G., & Zhang, Z. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106954 · Cited by 59 · see citing works

In-Process Monitoring of Temperature Evolution during Fused Filament Fabrication: A Journey from Numerical to Experimental Approaches

Vanaei, H. R., Shirinbayan, M., Deligant, M., Khelladi, S., & Tcharkhtchi, A. (2021) · Thermo · doi:10.3390/thermo1030021 · Cited by 59 · see citing works

Interlaminar bonding assessment in vertical-oriented filament material extrusion bending specimens

Kechagias, J. D., Fountas, N. A., Papantoniou, I. G., & Vaxevanidis, N. M. (2025) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-025-15124-7 · Cited by 58 · see citing works

A comprehensive review of lunar-based manufacturing and construction

Azami, M., Kazemi, Z., Moazen, S., Dubé, M., Potvin, M.-J., & Skonieczny, K. (2024) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2024.101045 · Cited by 57 · see citing works

Improving mechanical performances at room and elevated temperatures of 3D printed polyether-ether-ketone composites by combining optimal short carbon fiber content and annealing treatment

Li, J., Fu, Y., Pi, W., Li, Y., & Fu, S. (2023) · Composites Part B Engineering · doi:10.1016/j.compositesb.2023.111067 · Cited by 56 · see citing works

Influence of Three-Dimensional Printing Parameters on Compressive Properties and Surface Smoothness of Polylactic Acid Specimens

Bakhtiari, H., Nikzad, M., & Tolouei‐Rad, M. (2023) · Polymers · doi:10.3390/polym15183827 · Cited by 56 · see citing works

Preparation and characterization of poly (ether ether ketone)/poly (ether imide)[PEEK/PEI] blends for fused filament fabrication

El Magri, A., El Mabrouk, K., & Vaudreuil, S. (2021) · Journal of Materials Science · doi:10.1007/s10853-021-06172-x · Cited by 55 · see citing works

Fused filament fabrication of polypropylene: Influence of the bead temperature on adhesion and porosity

Charlon, S., Boterff, J. L., & Soulestin, J. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.101838 · Cited by 54 · see citing works

Additive manufacturing: a review on mechanical properties of polyjet and FDM printed parts

Chandramohan, P., Raghu, R., & Dhanraj, P. K. (2021) · Polymer Bulletin · doi:10.1007/s00289-021-03899-0 · Cited by 57 · see citing works

Orthotropic mechanical properties of PLA materials fabricated by fused deposition modeling

Li, M., Xu, Y., & Fang, J. (2024) · Thin-Walled Structures · doi:10.1016/j.tws.2024.111800 · Cited by 54 · see citing works

FDM-3D printing parameter optimization using taguchi approach on surface roughness of thermoplastic polyurethane parts

Hasdiansah, H., Yaqin, R. I., Pristiansyah, P., Umar, M. L., & Priyambodo, B. H. (2023) · International Journal on Interactive Design and Manufacturing (IJIDeM) · doi:10.1007/s12008-023-01304-w · Cited by 53 · see citing works

A state-of-the-art review on energy consumption and quality characteristics in metal additive manufacturing processes

Majeed, A., Ahmed, A., Lv, J., Peng, T., & Muzamil, M. (2020) · Journal of the Brazilian Society of Mechanical Sciences and Engineering · doi:10.1007/s40430-020-02323-4 · Cited by 53 · see citing works

Effect of processing parameters on flexural properties of 3D ‐printed polyetherketoneketone using fused deposition modeling

Xu, C., Cheng, K., Liu, Y., Wang, R., Jiang, X., Dong, X., & Xu, X. (2020) · Polymer Engineering and Science · doi:10.1002/pen.25590 · Cited by 52 · see citing works

High-performance carbon fiber reinforced polyether-ether-ketone composite pellets 3D-Printed via screw-extrusion additive manufacturing

Hu, Z., He, J., Chen, W., Liu, W., Ding, J., He, C., Wang, S., Ning, F., & Li, X. (2023) · Composites Science and Technology · doi:10.1016/j.compscitech.2023.110362 · Cited by 51 · see citing works

Fused-Filament Fabrication of Short Carbon Fiber-Reinforced Polyamide: Parameter Optimization for Improved Performance under Uniaxial Tensile Loading

Belei, C. A. F., Joeressen, J., & Amancio‐Filho, S. T. (2022) · Polymers · doi:10.3390/polym14071292 · Cited by 52 · see citing works

Investigating the effect of printing conditions and annealing on the porosity and tensile behavior of 3D ‐printed polyetherimide material in Z ‐direction

Ouassil, S., Magri, A. E., Vanaei, H. R., & Vaudreuil, S. (2022) · Journal of Applied Polymer Science · doi:10.1002/app.53353 · Cited by 50 · see citing works

Additive manufacturing of polyether ether ketone-based composites for space application: a mini-review

Rinaldi, M., Ferrara, M., Pigliaru, L., Allegranza, C., & Nanni, F. M. C. (2021) · CEAS Space Journal · doi:10.1007/s12567-021-00401-4 · Cited by 49 · see citing works

Layer thickness and path width setting in 3D printing of pre-impregnated continuous carbon, glass fibers and their hybrid composites

Ding, S., Zou, B., Zhang, P., Liu, Q., Zhuang, Y., Feng, Z., Wang, F., & Wang, X. (2024) · Additive manufacturing · doi:10.1016/j.addma.2024.104054 · Cited by 49 · see citing works

Solid Dispersion Formulations by FDM 3D Printing—A Review

Khalid, G. M., & Billa, N. (2022) · Pharmaceutics · doi:10.3390/pharmaceutics14040690 · Cited by 48 · see citing works

Influence of Process Parameters on the Characteristics of Additively Manufactured Parts Made from Advanced Biopolymers

Pepelnjak, T., Stojšić, J., Sevšek, L., Movrin, D., & Milutinović, M. (2023) · Polymers · doi:10.3390/polym15030716 · Cited by 51 · see citing works

Slowing crystallization to enhance interlayer strength of 3D printed poly (ether ether ketone) parts by molecular design

Shang, Y., Xu, Q., Jiang, B., Yang, Y., Liu, X. H., Jiang, Z., Yu, C. Y., Li, X., & Zhang, H. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.103104 · Cited by 47 · see citing works

Optimization of fused deposition modeling (FDM) process parameters for flexural strength

Dev, S., & Srivastava, R. (2021) · Materials Today Proceedings · doi:10.1016/j.matpr.2021.02.436 · Cited by 46 · see citing works

Functionally graded polyetheretherketone-based composites additively manufactured by material extrusion using a transition interface design method

Wang, P., Zou, B., Ding, S., Zhuang, Y., Liu, J., & Li, L. (2022) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2022.106977 · Cited by 45 · see citing works

Mechanical performance of non-reinforced, carbon fiber reinforced and glass bubbles reinforced 3D printed PA12 polyamide

Pejkowski, Ł., Seyda, J., Nowicki, K., & Mrozik, D. (2022) · Polymer Testing · doi:10.1016/j.polymertesting.2022.107891 · Cited by 45 · see citing works

Effect of printing parameters on tensile, thermal and structural properties of 3D ‐printed poly (ether ketone ketone) PEKK material using fused deposition modeling

Magri, A. E., Vaudreuil, S., ayad, A. B., Hakimi, A. E., Otmani, R. E., & Amegouz, D. (2023) · Journal of Applied Polymer Science · doi:10.1002/app.54078 · Cited by 44 · see citing works

Effect of in situ thermal treatment on interlayer adhesion of 3D printed polyetherimide (PEI) parts produced by fused deposition modeling (FDM)

Nguyen, K. Q., Vuillaume, P. Y., Hu, L., Vachon, A., Diouf‐Lewis, A., Marcoux, P.-L., Robert, M., & Elkoun, S. (2024) · Materials Today Communications · doi:10.1016/j.mtcomm.2024.108588 · Cited by 44 · see citing works

The Surface Characteristics, Microstructure and Mechanical Properties of PEEK Printed by Fused Deposition Modeling with Different Raster Angles

Gao, S., Liu, R., Xin, H., Liang, H., Wang, Y., & Jia, J. (2021) · Polymers · doi:10.3390/polym14010077 · Cited by 43 · see citing works

In-house processing of 3D printable polyetheretherketone (PEEK) filaments and the effect of fused deposition modeling parameters on 3D-printed PEEK structures

Challa, B. T., Gummadi, S. K., Elhattab, K., Ahlstrom, J., & Sikder, P. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-09360-4 · Cited by 48 · see citing works

Research on the Fused Deposition Modeling of Polyether Ether Ketone

Gao, R., Xie, J., Yang, J., Zhuo, C., Fu, J., & Zhao, P. (2021) · Polymers · doi:10.3390/polym13142344 · Cited by 43 · see citing works

A Post-Processing Method for Improving the Mechanical Properties of Fused-Filament-Fabricated 3D-Printed Parts

Malagutti, L., Ronconi, G., Zanelli, M., Mollica, F., & Mazzanti, V. (2022) · Processes · doi:10.3390/pr10112399 · Cited by 43 · see citing works

Mechanical Properties of Fused Deposition Modeling of Polyetheretherketone (PEEK) and Interest for Dental Restorations: A Systematic Review

Moby, V., Dupagne, L., Fouquet, V., Attal, J., François, P., & Dursun, E. (2022) · Materials · doi:10.3390/ma15196801 · Cited by 39 · see citing works

Effects of Coefficient of Thermal Expansion and Moisture Absorption on the Dimensional Accuracy of Carbon-Reinforced 3D Printed Parts

Faust, J. L., Kelly, P. G., Jones, B. D., & Roy‐Mayhew, J. D. (2021) · Polymers · doi:10.3390/polym13213637 · Cited by 40 · see citing works

Effects of fused filament fabrication process parameters on tensile properties of polyether ketone ketone (PEKK)

Rashed, K., Kafi, A., Simons, R., & Bateman, S. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-10134-1 · Cited by 39 · see citing works

Multiobjective optimization of tribological characteristics of 3D printed texture surfaces for ABS and PLA Polymers

Mourya, V., Bhore, S. P., & Wandale, P. G. (2023) · Journal of Thermoplastic Composite Materials · doi:10.1177/08927057231185710 · Cited by 39 · see citing works

Material Extrusion 3D Printing of PEEK-Based Composites

Hanemann, T., Klein, A., Baumgärtner, S., Jung, J., Wilhelm, D., & Antusch, S. (2023) · Polymers · doi:10.3390/polym15163412 · Cited by 39 · see citing works

Fused filament fabrication of polyetheretherketone/multiwalled carbon nanotube nanocomposites: the effect of thermally conductive nanometric filler on the printability and related properties

Rinaldi, M., Ghidini, T., & Nanni, F. M. C. (2021) · Polymer International · doi:10.1002/pi.6206 · Cited by 40 · see citing works

Optimization of material extrusion additive manufacturing process parameters for polyether ketone ketone (PEKK)

Rashed, K., Kafi, A., Simons, R., & Bateman, S. (2023) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-023-11167-w · Cited by 38 · see citing works

Surface porous poly-ether-ether-ketone based on three-dimensional printing for load-bearing orthopedic implant

Li, S., Wang, T., Hu, J., Li, Z., Wang, B., Wang, L., & Zhou, Z. (2021) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2021.104561 · Cited by 38 · see citing works

Essential work of fracture studies of 3D Printed PEEK (Poly-ether-ether-ketone) polymer

Sharma, G., Vuppuluri, A., & Suresh, K. (2022) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2022.108656 · Cited by 38 · see citing works

3D Printed Strontium and Zinc Doped Hydroxyapatite Loaded PEEK for Craniomaxillofacial Implants

Manzoor, F., Golbang, A., Dixon, D., Mancuso, E., Azhar, U., Manolakis, I., Crawford, D., McIlhagger, A., & Harkin‐Jones, E. (2022) · Polymers · doi:10.3390/polym14071376 · Cited by 37 · see citing works

Investigation on the impact resistance of 3D printed nacre-like composites

Ko, K., Lee, S., Hwang, Y. K., Jin, S., & Hong, J. (2022) · Thin-Walled Structures · doi:10.1016/j.tws.2022.109392 · Cited by 37 · see citing works

Additive manufacturing of functional devices for environmental applications: A review

Fagundes, A. P., Lira, J. O. D. B., Padoin, N., Soares, C., & Riella, H. G. (2022) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2022.108049 · Cited by 38 · see citing works

Ultra- and high-performance polymers for material extrusion additive manufacturing: Recent advancements, challenges, and optimization perspectives

Vidakis, N., Petousis, M., Spyridaki, M., Mountakis, N., Dimitriou, E., & Michailidis, N. (2025) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2025.101086 · Cited by 38 · see citing works

Study Of the compression behaviours of 3D-printed PEEK/CFR-PEEK sandwich composite structures

Jiang, H., Aihemaiti, P., Aiyiti, W., & Kasimu, A. (2021) · Virtual and Physical Prototyping · doi:10.1080/17452759.2021.2014636 · Cited by 37 · see citing works

One-Step Fabrication of Superhydrophobic Surfaces with Wettability Gradient Using Three-Dimensional Printing

Sung, J., Lee, H. M., Yoon, G. H., Bae, S., & So, H. (2022) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-022-00418-y · Cited by 36 · see citing works

Effects of physical and chemical ageing on 3D printed poly (ether ether ketone)/poly (ether imide) [PEEK/PEI] blend for aerospace applications

Magri, A. E., & Vaudreuil, S. (2022) · Journal of Materials Science · doi:10.1007/s10853-022-08068-w · Cited by 35 · see citing works

In situ 3D printing of poly-ether-ether-ketone / poly-ether-imide hierarchical cellular foams containing electromagnetic absorbent

Zhang, J., Li, D., Zhu, W., & Li, Y. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.103181 · Cited by 33 · see citing works

Comprehensive analysis of fused deposition modeling process conditions for enhancing mechanical properties and surface quality of 3D-Printed poly-ether-ether-ketone

Gao, J., Li, W., Wang, J., Wang, X., Sha, C., & Zhao, K. (2024) · Polymer Testing · doi:10.1016/j.polymertesting.2024.108432 · Cited by 23 · see citing works

A comprehensive analysis on the processing-structure-property relationships of FDM-based 3-D printed polyetheretherketone (PEEK) structures

Sikder, P., Challa, B. T., & Gummadi, S. K. (2022) · Materialia · doi:10.1016/j.mtla.2022.101427 · Cited by 118 · see citing works

Effects of printing parameters of fused deposition modeling on mechanical properties, surface quality, and microstructure of PEEK

Wang, P., Zou, B., Xiao, H., Ding, S., & Huang, C. (2019) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2019.03.016 · Cited by 462 · see citing works

Effect of 3D Printing Process Parameters and Heat Treatment Conditions on the Mechanical Properties and Microstructure of PEEK Parts

Zhen, H., Zhao, B., Quan, L., & Fu, J. (2023) · Polymers · doi:10.3390/polym15092209 · Cited by 68 · see citing works

Effect of molecular weight on mechanical properties and microstructure of 3D printed poly(ether ether ketone)

Xu, Q., Shang, Y., Jiang, Z., Wang, Z., Zhou, C., Liu, X., Yan, Q., Li, X., & Zhang, H. (2020) · Polymer International · doi:10.1002/pi.6166 · Cited by 26 · see citing works