Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 224 of the 224 references it cites were found in a registry or an index; 56 of the 239 sources its claims cite were checked for support.

Lab-scale photobioreactor systems: principles, applications, and scalability

Open access
Benner, Philipp, Meier, Lisa, Pfeffer, Annika, Krüger, Konstantin, Oropeza Vargas, José Enrique, Weuster-Botz, Dirk · 2022 · Bioprocess and Biosystems Engineering

Abstract

Review of laboratory-scale photobioreactor designs including illuminated shake flasks, bubble columns, flat-plate and stirred-tank systems, with selection criteria for scale-up.

Overview

CoChat Summary

TL;DR

This review surveys laboratory-scale photobioreactor designs for microalgae and cyanobacteria and evaluates their advantages, disadvantages, and scalability. It recommends matching lab reactors to the projected large-scale geometry and using light-dependent growth kinetics for model-based scale-up, while addressing contamination, temperature, shear, biofilm, and flashing-light effects.

Key findings

  • Lab-scale photobioreactors span microliter to liter scales: microtiter plates have wells < 4000 µL and enable parallel batch experiments, but light attenuation is not comparable to industrial-scale reactors and continuous sampling is not possible.
  • Bubble column photobioreactors commonly operate at 1–10 L (smallest described: 450 mL; up to 28 L with internal illumination), with gas flow rates of 0.1–1 vvm and incident light intensities of 15–220 µmol m⁻² s⁻¹; external illumination creates light gradients, while internal illumination gives more homogeneous light distribution.
  • Flat plate photobioreactors often use 80–400 µmol m⁻² s⁻¹; reducing the light path from 30 to 15 mm increased *C. vulgaris* biomass productivity 2.5-fold, and increasing flow from 45 to 77 L min⁻¹ reduced biofilm-bound *C. vulgaris* cells from 70% to 19%.
  • For scale-up, a factor of 10 is generally recommended, though light-sensitive cyanobacteria may require a lower factor; open raceway ponds are typically 20–30 cm deep, thin-layer cascade reactors use 0.5–1 cm layers (lab-scale example: 8 m², 65 L, ~0.6 cm), and artificial LED lighting was estimated at $1.9 per kg of purple phototrophic bacteria biomass.

Methods

  • Narrative review of laboratory-scale photobioreactor systems, covering microfluidic, shaken (microtiter plate and shake flask), bubble column, flat plate, stirred-tank, tubular, and other designs.
  • No primary experimental dataset; the paper synthesizes published studies and examples, including reported volumes, light intensities, gas flow rates, and scale-up cases.
  • Main analysis is qualitative comparison of reactor advantages/disadvantages and recommendations for reactor selection, operation, and scale-up, with emphasis on light-dependent microalgae growth kinetics as a basis for model-based scale-up.

Limitations

  • The paper states system-specific limitations, including that microtiter plate light attenuation is not comparable to industrial scale, continuous sampling is not possible in low-volume systems, dead microalgae cells cannot be distinguished from living cells in microfluidic chips, and custom microfluidic designs may hinder experiment replication.
  • The paper notes that flashing-light effects have not been unequivocally proven at pilot or production scale, and that most large-scale phototrophic cultivations give lower yields than expected from laboratory results.
  • Evident from the text: as a narrative review, it does not report a systematic search strategy or quantitative meta-analysis, and its scale-up recommendations are largely qualitative and based on cited examples rather than a unified experimental validation.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1007/s00449-022-02711-1

Cites

224 of 224 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Fig. 1 Shake flasks with 50–100 mL microalgae suspension inside a shaking incubator. A LED-panel is placed on top of the transparent incubator cover. An alternative is the individual illumination of shake flasks from the bottom up by individual LED-panels (not shown)
Fig. 1 Shake flasks with 50–100 mL microalgae suspension inside a shaking incubator. A LED-panel is placed on top of the transparent incubator cover. An alternative is the individual illumination of shake flasks from the bottom up by individual LED-panels (not shown)CC BY · PubMed Central
Fig. 2 Bubble column photobioreactor with 200 mL working volume, defined gas flow and pH electrode in an illuminated incubator [109]
Fig. 2 Bubble column photobioreactor with 200 mL working volume, defined gas flow and pH electrode in an illuminated incubator [109]CC BY · PubMed Central
Fig. 3 Modeling of light attenuation in the microalgae suspension. Exemplary comparison between a flat PBR (solid line) e.g. flat plate PBR [91] and a cylindrical PBR (dotted line) e.g. bubble column PBR ([83]). Light attenuation in the cylindrical reactor is influenced by the focusing effect [133]. Process parameters for both calculations were set to: incident light intensity I0 = 300 µmol m−2 s−1, optical density OD = 3.0, absorption coefficient 70 L m−1, layer thickness flat PBR 2 cm/radius cylindrical PBR 2 cm
Fig. 3 Modeling of light attenuation in the microalgae suspension. Exemplary comparison between a flat PBR (solid line) e.g. flat plate PBR [91] and a cylindrical PBR (dotted line) e.g. bubble column PBR ([83]). Light attenuation in the cylindrical reactor is influenced by the focusing effect [133]. Process parameters for both calculations were set to: incident light intensity I0 = 300 µmol m−2 s−1, optical density OD = 3.0, absorption coefficient 70 L m−1, layer thickness flat PBR 2 cm/radius cylindrical PBR 2 cmCC BY · PubMed Central
Fig. 4 Stirred-tank photobioreactor on a liter-scale with external illumination
Fig. 4 Stirred-tank photobioreactor on a liter-scale with external illuminationCC BY · PubMed Central
Fig. 5 Growth kinetics identified with closed flat plate gas-lift reactors illuminated from one side (left) can be used with completely different photobioreactors like open thin-layer cascade photobioreactors illuminated from the top (right) independent of the liquid layer thickness (e.g. 20 mm with the flat plate photobioreactor, and 6 mm with the thin-layer cascade photobioreactor, respectively) if mixing is high enough (turbulent flow). I0 incident photon flux density, I light attenuation in the microalgae suspension, I* mean photon flux density, L layer thickness [25]
Fig. 5 Growth kinetics identified with closed flat plate gas-lift reactors illuminated from one side (left) can be used with completely different photobioreactors like open thin-layer cascade photobioreactors illuminated from the top (right) independent of the liquid layer thickness (e.g. 20 mm with the flat plate photobioreactor, and 6 mm with the thin-layer cascade photobioreactor, respectively) if mixing is high enough (turbulent flow). I0 incident photon flux density, I light attenuation in the microalgae suspension, I* mean photon flux density, L layer thickness [25]CC BY · PubMed Central

Verification

Claims the paper makes

41 Valid · 5 Not valid · 110 Not checked · 57 Own results and interpretations

111 more claims · 26 with their cited sources checked

Create a free account to see all 213 claims and to verify the 2 references still open.

See all claims — free account
  • It may state two separate claims as one. 68
  • Probably not a substantial claim. 42

Create a free account to see these claims.

Citations

Cites

Show all 222 references

Research works printed but not linked: 1

  1. Burk MJ (2010) Sustainable production of industrial chemicals from sugars. Int Sugar J 112:6

Cited by

See all 215

Metadata

Authors
Benner, P., Meier, L., Pfeffer, A., Krüger, K., Oropeza Vargas, J. E., & Weuster-Botz, D.
Affiliations
Technical University of Munich (DE)
Venue
Bioprocess and Biosystems Engineering
Published
2022-03-18
Volume
45
Issue
5
Pages
791-813
ISSN
  • 1615-7591 (ISSN-L)
  • 1615-7605
OpenAlex
W4220668937
Cited by
215
References
222
Citations by year
2026: 70 · 2025: 60 · 2024: 51 · 2023: 29 · 2022: 5
FWCI
2.30
Type
journal article
Language
en
Open access
Licence
Locations
  • Bioprocess and Biosystems Engineering (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • mediaTUM (Technical University of Munich) (submittedVersion)
  • mediaTUM – the media and publications repository of the Technical University Munich (Technical University Munich) (submittedVersion, other-oa)
Funders
Technische Universität München
Topics
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Algal biology and biofuel production
  • Physical Sciences › Chemical Engineering › Fluid Flow and Transfer Processes › Fluid Dynamics and Mixing
  • Physical Sciences › Environmental Science › Environmental Chemistry › Aquatic Ecosystems and Phytoplankton Dynamics
Keywords
photobioreactors, microalgae, cyanobacteria, phototrophic cultivation, microplates, microfluidics, shake flask, bubble column, stirred tank bioreactor, raceway ponds, scale-up, scale-down model, CO2 fixation, bioactive compounds, bioprocess design
MeSH terms
Cyanobacteria, Carbon Dioxide, Humans, Biomass, Microalgae, Photobioreactors

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (gpt-6-sol).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Lab-scale photobioreactor systems: principles, applications, and scalability. https://app.cochat.ai/papers/10.1007/s00449-022-02711-1
The paper
Benner, P., Meier, L., Pfeffer, A., Krüger, K., Oropeza Vargas, J. E., & Weuster-Botz, D. (2022). Lab-scale photobioreactor systems: principles, applications, and scalability. Bioprocess and Biosystems Engineering. https://doi.org/10.1007/s00449-022-02711-1

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.