The role of fabric in the quasi-static compressive mechanical properties of human trabecular bone from various anatomical locations
The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
Abstract
Osteoporosis leads to an increased risk of bone fracture. While bone density and architecture can be assessed in vivo with increasing accuracy using CT and MRI, their relationship with the critical mechanical properties at various anatomical sites remain unclear. The objective of this study was to quantify the quasi-static compressive mechanical properties of human trabecular bone among different skeletal sites and compare their relationships with bone volume fraction and a measure of microstructural anisotropy called fabric. Over 600 trabecular bone samples from six skeletal sites were assessed by microCT and tested in uniaxial compression. Bone volume fraction correlated positively with elastic modulus, yield stress, ultimate stress, and the relationships depended strongly on skeletal site. The account of fabric improved these correlations substantially, especially when the data of all sites were pooled together, but the fabric-mechanical property relationships remained somewhat distinct among the anatomical sites. The study confirms that, beyond volume fraction, fabric plays an important role in determining the mechanical properties of trabecular bone and should be exploited in mechanical analysis of clinically relevant sites of the human skeleton.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“More recent research has indicated that the fabric–mechanical property relationships may depend on anatomic site (130).”
From Bone Mechanical Properties in Healthy and Diseased States (2018) · cites this paper as [130]
Citations
Cites
The compressive behavior of bone as a two-phase porous structure
Carter, D., & Hayes, W. (1977) · The Journal of Bone & Joint Surgery · doi:10.2106/00004623-197759070-00021 · Cited by 2,001
Hildebrand, T., Laib, A., Müller, R., Dequeker, J., & Rüegsegger, P. (1999) · Journal of Bone and Mineral Research · doi:10.1359/jbmr.1999.14.7.1167 · Cited by 1,303
Trabecular bone modulus–density relationships depend on anatomic site
Morgan, E. F., Bayraktar, H. H., & Keaveny, T. M. (2003) · Journal of Biomechanics · doi:10.1016/s0021-9290(03)00071-x · Cited by 1,209 · cited 1×
“A more recent study reported that there is no single, universal relationship between elastic properties and density across anatomic site for on-axis loading ( Morgan et al. 2003 ).”
BackgroundZysset, P. K., Edward Guo, X., Edward Hoffler, C., Moore, K. E., & Goldstein, S. A. (1999) · Journal of Biomechanics · doi:10.1016/s0021-9290(99)00111-6 · Cited by 1,006
Self-citationElastic properties of human cortical and trabecular lamellar bone measured by nanoindentation
Rho, J.-Y., Tsui, T. Y., & Pharr, G. M. (1997) · Biomaterials · doi:10.1016/s0142-9612(97)00073-2 · Cited by 924
The relationship between the structural and orthogonal compressive properties of trabecular bone
Goulet, R. W., Goldstein, S. A., Ciarelli, M. J., Kuhn, J. L., Brown, M. B., & Feldkamp, L. A. (1994) · Journal of Biomechanics · doi:10.1016/0021-9290(94)90014-0 · Cited by 741
On the dependence of the elasticity and strength of cancellous bone on apparent density
Rice, J. C., Cowin, S. C., & Bowman, J. A. (1988) · Journal of Biomechanics · doi:10.1016/0021-9290(88)90008-5 · Cited by 734
Dependence of yield strain of human trabecular bone on anatomic site
Morgan, E. F., & Keaveny, T. M. (2001) · Journal of Biomechanics · doi:10.1016/s0021-9290(01)00011-2 · Cited by 705 · cited 1×
“Morgan and Keaveny (2001) measured yield strains inthesamerangeatfouranatomicallocationsandfound significant differences between sites with the lowest value at the femoral trochanter.”
BackgroundCharacterization of microstructural anisotropy in orthotropic materials using a second rank tensor
Harrigan, T. P., & Mann, R. W. (1984) · Journal of Materials Science · doi:10.1007/bf00540446 · Cited by 603
The relationship between the elasticity tensor and the fabric tensor
Cowin, S. C. (1985) · Mechanics of Materials · doi:10.1016/0167-6636(85)90012-2 · Cited by 570
Research works printed but not linked: 3
- Curnier A (2004) Mécanique des Solides Déformables. Presses Polytechniques et Universitaires Romandes, Lausanne
- Kabel J, van Rietbergen B, Odgaard A, Huiskes R (1997) Fabric and volume fraction can accurately predict mechanical properties for a wide range of trabecular architectures. In: Transactions of the 43rd annual meeting of the ORS San Francisco, vol 2, p 800
- Zysset PhK, Curnier A (1995) An alternative model for anisotropic elasticity of trabecular bone. In: Bioengineering conference of the ASME, Beaver Creek, Colorado, p 359
Cited by
Bone Mechanical Properties in Healthy and Diseased States
Morgan, E. F., Unnikrisnan, G. U., & Hussein, A. I. (2018) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-062117-121139 · Cited by 1,026
“More recent research has indicated that the fabric–mechanical property relationships may depend on anatomic site (130).”
Maquer, G., Musy, S. N., Wandel, J., Gross, T., & Zysset, P. K. (2015) · Journal of Bone and Mineral Research · doi:10.1002/jbmr.2437 · Cited by 199
“Alternatively, accounting for trabecular fabric anisotropy enhances the high correlations between BV/TV and stiffness.((22)) In fact, with only these two variables (BV/TV and fabric anisotropy), morphology-elasticity relationships can already explain more than 95% of the variation in elastic properties of trabecular b…”
BackgroundSelf-citationDall’Ara, E., Pahr, D., Varga, P., Kainberger, F., & Zysset, P. (2012) · Osteoporosis International · doi:10.1007/s00198-011-1568-3 · Cited by 181
“Experimental studies have recently shown that bone strength is affected both by BMD, that remain the primary factor, and by bone quality [17–20], that includes several parameters like cortical thickness and porosity [21–23], trabecular bone morphology [24–27], microdamage [20, 28, 29], and properties of the matrix [30…”
BackgroundSelf-citationMulti-axial mechanical properties of human trabecular bone
Rincón-Kohli, L., & Zysset, P. K. (2009) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-008-0128-z · Cited by 177
Self-citationAdvances in osteoporosis imaging
Bauer, J. S., & Link, T. M. (2009) · European Journal of Radiology · doi:10.1016/j.ejrad.2008.04.064 · Cited by 179
“[78] Matsuura M, Eckstein F, Lochmüller EM, Zysset PK.”
Metadata
- Authors
- Matsuura, M., Eckstein, F., Lochmüller, E.-M., & Zysset, P. K.
- Affiliations
- Anatomische Anstalt (DE)
- Paracelsus Medical University (AT)
- Ludwig-Maximilians-Universität München (DE)
- TU Wien (AT)
- Corresponding author
- Zysset, Philippe K.
- Venue
- Biomechanics and Modeling in Mechanobiology
- Published
- 2007-01-19
- Volume
- 7
- Issue
- 1
- Pages
- 27-42
- ISSN
- 1617-7940 (ISSN-L)
- 1617-7959
- OpenAlex
- W2037829287
- Cited by
- 117
- References
- 39
- Citations by year
- 2026: 2 · 2025: 2 · 2024: 4 · 2023: 5 · 2022: 4 · 2021: 8 · 2020: 7 · 2019: 3 · 2018: 5 · 2017: 3 · 2016: 4 · 2015: 6 · 2014: 6 · 2013: 11 · 2012: 18
- FWCI
- 6.57
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- Locations
- Biomechanics and Modeling in Mechanobiology (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Health Sciences › Medicine › Orthopedics and Sports Medicine › Bone health and osteoporosis research
- Health Sciences › Medicine › Orthopedics and Sports Medicine › Bone fractures and treatments
- Physical Sciences › Engineering › Biomedical Engineering › Elasticity and Material Modeling
- Keywords
- trabecular bone, textiles, microstructural anisotropy, bone volume fraction, elastic modulus, yield stress, ultimate stress, osteoporosis, bone fracture risk, human bone
- MeSH terms
- Bone and Bones, Humans, Materials Testing, Tomography, X-Ray Computed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The role of fabric in the quasi-static compressive mechanical properties of human trabecular bone from various anatomical locations. https://app.cochat.ai/papers/10.1007/s10237-006-0073-7
- The paper
- Matsuura, M., Eckstein, F., Lochmüller, E.-M., & Zysset, P. K. (2008). The role of fabric in the quasi-static compressive mechanical properties of human trabecular bone from various anatomical locations. Biomechanics and Modeling in Mechanobiology. https://doi.org/10.1007/s10237-006-0073-7
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.