CoChat

The role of fabric in the quasi-static compressive mechanical properties of human trabecular bone from various anatomical locations

Matsuura, Maiko, Eckstein, Felix, Lochmüller, Eva-Maria, Zysset, Philippe K. · 2008 · Biomechanics and Modeling in Mechanobiology

The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.

Abstract

Osteoporosis leads to an increased risk of bone fracture. While bone density and architecture can be assessed in vivo with increasing accuracy using CT and MRI, their relationship with the critical mechanical properties at various anatomical sites remain unclear. The objective of this study was to quantify the quasi-static compressive mechanical properties of human trabecular bone among different skeletal sites and compare their relationships with bone volume fraction and a measure of microstructural anisotropy called fabric. Over 600 trabecular bone samples from six skeletal sites were assessed by microCT and tested in uniaxial compression. Bone volume fraction correlated positively with elastic modulus, yield stress, ultimate stress, and the relationships depended strongly on skeletal site. The account of fabric improved these correlations substantially, especially when the data of all sites were pooled together, but the fabric-mechanical property relationships remained somewhat distinct among the anatomical sites. The study confirms that, beyond volume fraction, fabric plays an important role in determining the mechanical properties of trabecular bone and should be exploited in mechanical analysis of clinically relevant sites of the human skeleton.

Overview

Integrity signals

Registry

Crossref · 10.1007/s10237-006-0073-7

Cites

39 of 39 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Research works printed but not linked: 3

  1. Curnier A (2004) Mécanique des Solides Déformables. Presses Polytechniques et Universitaires Romandes, Lausanne
  2. Kabel J, van Rietbergen B, Odgaard A, Huiskes R (1997) Fabric and volume fraction can accurately predict mechanical properties for a wide range of trabecular architectures. In: Transactions of the 43rd annual meeting of the ORS San Francisco, vol 2, p 800
  3. Zysset PhK, Curnier A (1995) An alternative model for anisotropic elasticity of trabecular bone. In: Bioengineering conference of the ASME, Beaver Creek, Colorado, p 359

Cited by

See all 117

Metadata

Authors
Matsuura, M., Eckstein, F., Lochmüller, E.-M., & Zysset, P. K.
Affiliations
  • Anatomische Anstalt (DE)
  • Paracelsus Medical University (AT)
  • Ludwig-Maximilians-Universität München (DE)
  • TU Wien (AT)
Corresponding author
Zysset, Philippe K.
Venue
Biomechanics and Modeling in Mechanobiology
Published
2007-01-19
Volume
7
Issue
1
Pages
27-42
ISSN
  • 1617-7940 (ISSN-L)
  • 1617-7959
OpenAlex
W2037829287
Cited by
117
References
39
Citations by year
2026: 2 · 2025: 2 · 2024: 4 · 2023: 5 · 2022: 4 · 2021: 8 · 2020: 7 · 2019: 3 · 2018: 5 · 2017: 3 · 2016: 4 · 2015: 6 · 2014: 6 · 2013: 11 · 2012: 18
FWCI
6.57
Type
journal article
Language
en
Open access
closed
Licence
www.springer.com/tdm (tdm)
Locations
  • Biomechanics and Modeling in Mechanobiology (publishedVersion)
  • PubMed (publishedVersion)
Topics
  • Health Sciences › Medicine › Orthopedics and Sports Medicine › Bone health and osteoporosis research
  • Health Sciences › Medicine › Orthopedics and Sports Medicine › Bone fractures and treatments
  • Physical Sciences › Engineering › Biomedical Engineering › Elasticity and Material Modeling
Keywords
trabecular bone, textiles, microstructural anisotropy, bone volume fraction, elastic modulus, yield stress, ultimate stress, osteoporosis, bone fracture risk, human bone
MeSH terms
Bone and Bones, Humans, Materials Testing, Tomography, X-Ray Computed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.